2 * linux/arch/arm/common/locomo.c
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This file contains all generic LoCoMo support.
12 * All initialization functions provided here are intended to be called
13 * from machine specific code with proper arguments when required.
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/errno.h>
23 #include <linux/ioport.h>
24 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/spinlock.h>
29 #include <mach/hardware.h>
31 #include <asm/mach/irq.h>
33 #include <asm/hardware/locomo.h>
35 /* M62332 output channel selection */
36 #define M62332_EVR_CH 1 /* M62332 volume channel number */
37 /* 0 : CH.1 , 1 : CH. 2 */
39 #define M62332_SLAVE_ADDR 0x4e /* Slave address */
40 #define M62332_W_BIT 0x00 /* W bit (0 only) */
41 #define M62332_SUB_ADDR 0x00 /* Sub address */
42 #define M62332_A_BIT 0x00 /* A bit (0 only) */
44 /* DAC setup and hold times (expressed in us) */
45 #define DAC_BUS_FREE_TIME 5 /* 4.7 us */
46 #define DAC_START_SETUP_TIME 5 /* 4.7 us */
47 #define DAC_STOP_SETUP_TIME 4 /* 4.0 us */
48 #define DAC_START_HOLD_TIME 5 /* 4.7 us */
49 #define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */
50 #define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */
51 #define DAC_DATA_SETUP_TIME 1 /* 250 ns */
52 #define DAC_DATA_HOLD_TIME 1 /* 300 ns */
53 #define DAC_LOW_SETUP_TIME 1 /* 300 ns */
54 #define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */
56 /* the following is the overall data for the locomo chip */
68 struct locomo_dev_info
{
76 /* All the locomo devices. If offset is non-zero, the mapbase for the
77 * locomo_dev will be set to the chip base plus offset. If offset is
78 * zero, then the mapbase for the locomo_dev will be set to zero. An
79 * offset of zero means the device only uses GPIOs or other helper
80 * functions inside this file */
81 static struct locomo_dev_info locomo_devices
[] = {
83 .devid
= LOCOMO_DEVID_KEYBOARD
,
87 .name
= "locomo-keyboard",
88 .offset
= LOCOMO_KEYBOARD
,
92 .devid
= LOCOMO_DEVID_FRONTLIGHT
,
94 .name
= "locomo-frontlight",
95 .offset
= LOCOMO_FRONTLIGHT
,
100 .devid
= LOCOMO_DEVID_BACKLIGHT
,
102 .name
= "locomo-backlight",
103 .offset
= LOCOMO_BACKLIGHT
,
107 .devid
= LOCOMO_DEVID_AUDIO
,
109 .name
= "locomo-audio",
110 .offset
= LOCOMO_AUDIO
,
114 .devid
= LOCOMO_DEVID_LED
,
116 .name
= "locomo-led",
117 .offset
= LOCOMO_LED
,
121 .devid
= LOCOMO_DEVID_UART
,
123 .name
= "locomo-uart",
128 .devid
= LOCOMO_DEVID_SPI
,
130 .name
= "locomo-spi",
131 .offset
= LOCOMO_SPI
,
137 /** LoCoMo interrupt handling stuff.
138 * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
139 * that is, there is only one real hardware interrupt
140 * we determine which interrupt it is by reading some IO memory.
141 * We have two levels of expansion, first in the handler for the
142 * hardware interrupt we generate an interrupt
143 * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
145 * hardware irq reads LOCOMO_ICR & 0x0f00
146 * IRQ_LOCOMO_KEY_BASE
147 * IRQ_LOCOMO_GPIO_BASE
149 * IRQ_LOCOMO_SPI_BASE
150 * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
152 * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
153 * IRQ_LOCOMO_GPIO[0-15]
154 * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
156 * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
159 * IRQ_LOCOMO_SPI_OVRN
160 * IRQ_LOCOMO_SPI_TEND
163 #define LOCOMO_IRQ_START (IRQ_LOCOMO_KEY_BASE)
164 #define LOCOMO_IRQ_KEY_START (IRQ_LOCOMO_KEY)
165 #define LOCOMO_IRQ_GPIO_START (IRQ_LOCOMO_GPIO0)
166 #define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT)
167 #define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR)
169 static void locomo_handler(unsigned int irq
, struct irq_desc
*desc
)
172 void __iomem
*mapbase
= get_irq_chip_data(irq
);
174 /* Acknowledge the parent IRQ */
175 desc
->chip
->ack(irq
);
177 /* check why this interrupt was generated */
178 req
= locomo_readl(mapbase
+ LOCOMO_ICR
) & 0x0f00;
181 /* generate the next interrupt(s) */
182 irq
= LOCOMO_IRQ_START
;
183 for (i
= 0; i
<= 3; i
++, irq
++) {
184 if (req
& (0x0100 << i
)) {
185 generic_handle_irq(irq
);
192 static void locomo_ack_irq(unsigned int irq
)
196 static void locomo_mask_irq(unsigned int irq
)
198 void __iomem
*mapbase
= get_irq_chip_data(irq
);
200 r
= locomo_readl(mapbase
+ LOCOMO_ICR
);
201 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_START
));
202 locomo_writel(r
, mapbase
+ LOCOMO_ICR
);
205 static void locomo_unmask_irq(unsigned int irq
)
207 void __iomem
*mapbase
= get_irq_chip_data(irq
);
209 r
= locomo_readl(mapbase
+ LOCOMO_ICR
);
210 r
|= (0x0010 << (irq
- LOCOMO_IRQ_START
));
211 locomo_writel(r
, mapbase
+ LOCOMO_ICR
);
214 static struct irq_chip locomo_chip
= {
216 .ack
= locomo_ack_irq
,
217 .mask
= locomo_mask_irq
,
218 .unmask
= locomo_unmask_irq
,
221 static void locomo_key_handler(unsigned int irq
, struct irq_desc
*desc
)
223 void __iomem
*mapbase
= get_irq_chip_data(irq
);
225 if (locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
) & 0x0001) {
226 generic_handle_irq(LOCOMO_IRQ_KEY_START
);
230 static void locomo_key_ack_irq(unsigned int irq
)
232 void __iomem
*mapbase
= get_irq_chip_data(irq
);
234 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
235 r
&= ~(0x0100 << (irq
- LOCOMO_IRQ_KEY_START
));
236 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
239 static void locomo_key_mask_irq(unsigned int irq
)
241 void __iomem
*mapbase
= get_irq_chip_data(irq
);
243 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
244 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_KEY_START
));
245 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
248 static void locomo_key_unmask_irq(unsigned int irq
)
250 void __iomem
*mapbase
= get_irq_chip_data(irq
);
252 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
253 r
|= (0x0010 << (irq
- LOCOMO_IRQ_KEY_START
));
254 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
257 static struct irq_chip locomo_key_chip
= {
258 .name
= "LOCOMO-key",
259 .ack
= locomo_key_ack_irq
,
260 .mask
= locomo_key_mask_irq
,
261 .unmask
= locomo_key_unmask_irq
,
264 static void locomo_gpio_handler(unsigned int irq
, struct irq_desc
*desc
)
267 void __iomem
*mapbase
= get_irq_chip_data(irq
);
269 req
= locomo_readl(mapbase
+ LOCOMO_GIR
) &
270 locomo_readl(mapbase
+ LOCOMO_GPD
) &
274 irq
= LOCOMO_IRQ_GPIO_START
;
275 for (i
= 0; i
<= 15; i
++, irq
++) {
276 if (req
& (0x0001 << i
)) {
277 generic_handle_irq(irq
);
283 static void locomo_gpio_ack_irq(unsigned int irq
)
285 void __iomem
*mapbase
= get_irq_chip_data(irq
);
287 r
= locomo_readl(mapbase
+ LOCOMO_GWE
);
288 r
|= (0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
289 locomo_writel(r
, mapbase
+ LOCOMO_GWE
);
291 r
= locomo_readl(mapbase
+ LOCOMO_GIS
);
292 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
293 locomo_writel(r
, mapbase
+ LOCOMO_GIS
);
295 r
= locomo_readl(mapbase
+ LOCOMO_GWE
);
296 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
297 locomo_writel(r
, mapbase
+ LOCOMO_GWE
);
300 static void locomo_gpio_mask_irq(unsigned int irq
)
302 void __iomem
*mapbase
= get_irq_chip_data(irq
);
304 r
= locomo_readl(mapbase
+ LOCOMO_GIE
);
305 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
306 locomo_writel(r
, mapbase
+ LOCOMO_GIE
);
309 static void locomo_gpio_unmask_irq(unsigned int irq
)
311 void __iomem
*mapbase
= get_irq_chip_data(irq
);
313 r
= locomo_readl(mapbase
+ LOCOMO_GIE
);
314 r
|= (0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
315 locomo_writel(r
, mapbase
+ LOCOMO_GIE
);
318 static int GPIO_IRQ_rising_edge
;
319 static int GPIO_IRQ_falling_edge
;
321 static int locomo_gpio_type(unsigned int irq
, unsigned int type
)
324 void __iomem
*mapbase
= get_irq_chip_data(irq
);
326 mask
= 1 << (irq
- LOCOMO_IRQ_GPIO_START
);
328 if (type
== IRQ_TYPE_PROBE
) {
329 if ((GPIO_IRQ_rising_edge
| GPIO_IRQ_falling_edge
) & mask
)
331 type
= IRQ_TYPE_EDGE_RISING
| IRQ_TYPE_EDGE_FALLING
;
334 if (type
& IRQ_TYPE_EDGE_RISING
)
335 GPIO_IRQ_rising_edge
|= mask
;
337 GPIO_IRQ_rising_edge
&= ~mask
;
338 if (type
& IRQ_TYPE_EDGE_FALLING
)
339 GPIO_IRQ_falling_edge
|= mask
;
341 GPIO_IRQ_falling_edge
&= ~mask
;
342 locomo_writel(GPIO_IRQ_rising_edge
, mapbase
+ LOCOMO_GRIE
);
343 locomo_writel(GPIO_IRQ_falling_edge
, mapbase
+ LOCOMO_GFIE
);
348 static struct irq_chip locomo_gpio_chip
= {
349 .name
= "LOCOMO-gpio",
350 .ack
= locomo_gpio_ack_irq
,
351 .mask
= locomo_gpio_mask_irq
,
352 .unmask
= locomo_gpio_unmask_irq
,
353 .set_type
= locomo_gpio_type
,
356 static void locomo_lt_handler(unsigned int irq
, struct irq_desc
*desc
)
358 void __iomem
*mapbase
= get_irq_chip_data(irq
);
360 if (locomo_readl(mapbase
+ LOCOMO_LTINT
) & 0x0001) {
361 generic_handle_irq(LOCOMO_IRQ_LT_START
);
365 static void locomo_lt_ack_irq(unsigned int irq
)
367 void __iomem
*mapbase
= get_irq_chip_data(irq
);
369 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
370 r
&= ~(0x0100 << (irq
- LOCOMO_IRQ_LT_START
));
371 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
374 static void locomo_lt_mask_irq(unsigned int irq
)
376 void __iomem
*mapbase
= get_irq_chip_data(irq
);
378 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
379 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_LT_START
));
380 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
383 static void locomo_lt_unmask_irq(unsigned int irq
)
385 void __iomem
*mapbase
= get_irq_chip_data(irq
);
387 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
388 r
|= (0x0010 << (irq
- LOCOMO_IRQ_LT_START
));
389 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
392 static struct irq_chip locomo_lt_chip
= {
394 .ack
= locomo_lt_ack_irq
,
395 .mask
= locomo_lt_mask_irq
,
396 .unmask
= locomo_lt_unmask_irq
,
399 static void locomo_spi_handler(unsigned int irq
, struct irq_desc
*desc
)
402 void __iomem
*mapbase
= get_irq_chip_data(irq
);
404 req
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIR
) & 0x000F;
406 irq
= LOCOMO_IRQ_SPI_START
;
408 for (i
= 0; i
<= 3; i
++, irq
++) {
409 if (req
& (0x0001 << i
)) {
410 generic_handle_irq(irq
);
416 static void locomo_spi_ack_irq(unsigned int irq
)
418 void __iomem
*mapbase
= get_irq_chip_data(irq
);
420 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
421 r
|= (0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
422 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
424 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIS
);
425 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
426 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIS
);
428 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
429 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
430 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
433 static void locomo_spi_mask_irq(unsigned int irq
)
435 void __iomem
*mapbase
= get_irq_chip_data(irq
);
437 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
438 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
439 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
442 static void locomo_spi_unmask_irq(unsigned int irq
)
444 void __iomem
*mapbase
= get_irq_chip_data(irq
);
446 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
447 r
|= (0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
448 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
451 static struct irq_chip locomo_spi_chip
= {
452 .name
= "LOCOMO-spi",
453 .ack
= locomo_spi_ack_irq
,
454 .mask
= locomo_spi_mask_irq
,
455 .unmask
= locomo_spi_unmask_irq
,
458 static void locomo_setup_irq(struct locomo
*lchip
)
461 void __iomem
*irqbase
= lchip
->base
;
464 * Install handler for IRQ_LOCOMO_HW.
466 set_irq_type(lchip
->irq
, IRQ_TYPE_EDGE_FALLING
);
467 set_irq_chip_data(lchip
->irq
, irqbase
);
468 set_irq_chained_handler(lchip
->irq
, locomo_handler
);
470 /* Install handlers for IRQ_LOCOMO_*_BASE */
471 set_irq_chip(IRQ_LOCOMO_KEY_BASE
, &locomo_chip
);
472 set_irq_chip_data(IRQ_LOCOMO_KEY_BASE
, irqbase
);
473 set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE
, locomo_key_handler
);
475 set_irq_chip(IRQ_LOCOMO_GPIO_BASE
, &locomo_chip
);
476 set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE
, irqbase
);
477 set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE
, locomo_gpio_handler
);
479 set_irq_chip(IRQ_LOCOMO_LT_BASE
, &locomo_chip
);
480 set_irq_chip_data(IRQ_LOCOMO_LT_BASE
, irqbase
);
481 set_irq_chained_handler(IRQ_LOCOMO_LT_BASE
, locomo_lt_handler
);
483 set_irq_chip(IRQ_LOCOMO_SPI_BASE
, &locomo_chip
);
484 set_irq_chip_data(IRQ_LOCOMO_SPI_BASE
, irqbase
);
485 set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE
, locomo_spi_handler
);
487 /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
488 set_irq_chip(LOCOMO_IRQ_KEY_START
, &locomo_key_chip
);
489 set_irq_chip_data(LOCOMO_IRQ_KEY_START
, irqbase
);
490 set_irq_handler(LOCOMO_IRQ_KEY_START
, handle_edge_irq
);
491 set_irq_flags(LOCOMO_IRQ_KEY_START
, IRQF_VALID
| IRQF_PROBE
);
493 /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
494 for (irq
= LOCOMO_IRQ_GPIO_START
; irq
< LOCOMO_IRQ_GPIO_START
+ 16; irq
++) {
495 set_irq_chip(irq
, &locomo_gpio_chip
);
496 set_irq_chip_data(irq
, irqbase
);
497 set_irq_handler(irq
, handle_edge_irq
);
498 set_irq_flags(irq
, IRQF_VALID
| IRQF_PROBE
);
501 /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
502 set_irq_chip(LOCOMO_IRQ_LT_START
, &locomo_lt_chip
);
503 set_irq_chip_data(LOCOMO_IRQ_LT_START
, irqbase
);
504 set_irq_handler(LOCOMO_IRQ_LT_START
, handle_edge_irq
);
505 set_irq_flags(LOCOMO_IRQ_LT_START
, IRQF_VALID
| IRQF_PROBE
);
507 /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
508 for (irq
= LOCOMO_IRQ_SPI_START
; irq
< LOCOMO_IRQ_SPI_START
+ 4; irq
++) {
509 set_irq_chip(irq
, &locomo_spi_chip
);
510 set_irq_chip_data(irq
, irqbase
);
511 set_irq_handler(irq
, handle_edge_irq
);
512 set_irq_flags(irq
, IRQF_VALID
| IRQF_PROBE
);
517 static void locomo_dev_release(struct device
*_dev
)
519 struct locomo_dev
*dev
= LOCOMO_DEV(_dev
);
525 locomo_init_one_child(struct locomo
*lchip
, struct locomo_dev_info
*info
)
527 struct locomo_dev
*dev
;
530 dev
= kzalloc(sizeof(struct locomo_dev
), GFP_KERNEL
);
537 * If the parent device has a DMA mask associated with it,
538 * propagate it down to the children.
540 if (lchip
->dev
->dma_mask
) {
541 dev
->dma_mask
= *lchip
->dev
->dma_mask
;
542 dev
->dev
.dma_mask
= &dev
->dma_mask
;
545 dev_set_name(&dev
->dev
, "%s", info
->name
);
546 dev
->devid
= info
->devid
;
547 dev
->dev
.parent
= lchip
->dev
;
548 dev
->dev
.bus
= &locomo_bus_type
;
549 dev
->dev
.release
= locomo_dev_release
;
550 dev
->dev
.coherent_dma_mask
= lchip
->dev
->coherent_dma_mask
;
553 dev
->mapbase
= lchip
->base
+ info
->offset
;
556 dev
->length
= info
->length
;
558 memmove(dev
->irq
, info
->irq
, sizeof(dev
->irq
));
560 ret
= device_register(&dev
->dev
);
570 struct locomo_save_data
{
578 static int locomo_suspend(struct platform_device
*dev
, pm_message_t state
)
580 struct locomo
*lchip
= platform_get_drvdata(dev
);
581 struct locomo_save_data
*save
;
584 save
= kmalloc(sizeof(struct locomo_save_data
), GFP_KERNEL
);
588 lchip
->saved_state
= save
;
590 spin_lock_irqsave(&lchip
->lock
, flags
);
592 save
->LCM_GPO
= locomo_readl(lchip
->base
+ LOCOMO_GPO
); /* GPIO */
593 locomo_writel(0x00, lchip
->base
+ LOCOMO_GPO
);
594 save
->LCM_SPICT
= locomo_readl(lchip
->base
+ LOCOMO_SPI
+ LOCOMO_SPICT
); /* SPI */
595 locomo_writel(0x40, lchip
->base
+ LOCOMO_SPICT
);
596 save
->LCM_GPE
= locomo_readl(lchip
->base
+ LOCOMO_GPE
); /* GPIO */
597 locomo_writel(0x00, lchip
->base
+ LOCOMO_GPE
);
598 save
->LCM_ASD
= locomo_readl(lchip
->base
+ LOCOMO_ASD
); /* ADSTART */
599 locomo_writel(0x00, lchip
->base
+ LOCOMO_ASD
);
600 save
->LCM_SPIMD
= locomo_readl(lchip
->base
+ LOCOMO_SPI
+ LOCOMO_SPIMD
); /* SPI */
601 locomo_writel(0x3C14, lchip
->base
+ LOCOMO_SPI
+ LOCOMO_SPIMD
);
603 locomo_writel(0x00, lchip
->base
+ LOCOMO_PAIF
);
604 locomo_writel(0x00, lchip
->base
+ LOCOMO_DAC
);
605 locomo_writel(0x00, lchip
->base
+ LOCOMO_BACKLIGHT
+ LOCOMO_TC
);
607 if ((locomo_readl(lchip
->base
+ LOCOMO_LED
+ LOCOMO_LPT0
) & 0x88) && (locomo_readl(lchip
->base
+ LOCOMO_LED
+ LOCOMO_LPT1
) & 0x88))
608 locomo_writel(0x00, lchip
->base
+ LOCOMO_C32K
); /* CLK32 off */
610 /* 18MHz already enabled, so no wait */
611 locomo_writel(0xc1, lchip
->base
+ LOCOMO_C32K
); /* CLK32 on */
613 locomo_writel(0x00, lchip
->base
+ LOCOMO_TADC
); /* 18MHz clock off*/
614 locomo_writel(0x00, lchip
->base
+ LOCOMO_AUDIO
+ LOCOMO_ACC
); /* 22MHz/24MHz clock off */
615 locomo_writel(0x00, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
); /* FL */
617 spin_unlock_irqrestore(&lchip
->lock
, flags
);
622 static int locomo_resume(struct platform_device
*dev
)
624 struct locomo
*lchip
= platform_get_drvdata(dev
);
625 struct locomo_save_data
*save
;
629 save
= lchip
->saved_state
;
633 spin_lock_irqsave(&lchip
->lock
, flags
);
635 locomo_writel(save
->LCM_GPO
, lchip
->base
+ LOCOMO_GPO
);
636 locomo_writel(save
->LCM_SPICT
, lchip
->base
+ LOCOMO_SPI
+ LOCOMO_SPICT
);
637 locomo_writel(save
->LCM_GPE
, lchip
->base
+ LOCOMO_GPE
);
638 locomo_writel(save
->LCM_ASD
, lchip
->base
+ LOCOMO_ASD
);
639 locomo_writel(save
->LCM_SPIMD
, lchip
->base
+ LOCOMO_SPI
+ LOCOMO_SPIMD
);
641 locomo_writel(0x00, lchip
->base
+ LOCOMO_C32K
);
642 locomo_writel(0x90, lchip
->base
+ LOCOMO_TADC
);
644 locomo_writel(0, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KSC
);
645 r
= locomo_readl(lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
647 locomo_writel(r
, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
648 locomo_writel(0x1, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KCMD
);
650 spin_unlock_irqrestore(&lchip
->lock
, flags
);
652 lchip
->saved_state
= NULL
;
661 * locomo_probe - probe for a single LoCoMo chip.
662 * @phys_addr: physical address of device.
664 * Probe for a LoCoMo chip. This must be called
665 * before any other locomo-specific code.
668 * %-ENODEV device not found.
669 * %-EBUSY physical address already marked in-use.
673 __locomo_probe(struct device
*me
, struct resource
*mem
, int irq
)
675 struct locomo
*lchip
;
677 int i
, ret
= -ENODEV
;
679 lchip
= kzalloc(sizeof(struct locomo
), GFP_KERNEL
);
683 spin_lock_init(&lchip
->lock
);
686 dev_set_drvdata(lchip
->dev
, lchip
);
688 lchip
->phys
= mem
->start
;
692 * Map the whole region. This also maps the
693 * registers for our children.
695 lchip
->base
= ioremap(mem
->start
, PAGE_SIZE
);
701 /* locomo initialize */
702 locomo_writel(0, lchip
->base
+ LOCOMO_ICR
);
704 locomo_writel(0, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
707 locomo_writel(0, lchip
->base
+ LOCOMO_GPO
);
708 locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
709 , lchip
->base
+ LOCOMO_GPE
);
710 locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
711 , lchip
->base
+ LOCOMO_GPD
);
712 locomo_writel(0, lchip
->base
+ LOCOMO_GIE
);
715 locomo_writel(0, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
716 locomo_writel(0, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALD
);
719 locomo_writel(0, lchip
->base
+ LOCOMO_LTINT
);
721 locomo_writel(0, lchip
->base
+ LOCOMO_SPIIE
);
723 locomo_writel(6 + 8 + 320 + 30 - 10, lchip
->base
+ LOCOMO_ASD
);
724 r
= locomo_readl(lchip
->base
+ LOCOMO_ASD
);
726 locomo_writel(r
, lchip
->base
+ LOCOMO_ASD
);
728 locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip
->base
+ LOCOMO_HSD
);
729 r
= locomo_readl(lchip
->base
+ LOCOMO_HSD
);
731 locomo_writel(r
, lchip
->base
+ LOCOMO_HSD
);
733 locomo_writel(128 / 8, lchip
->base
+ LOCOMO_HSC
);
736 locomo_writel(0x80, lchip
->base
+ LOCOMO_TADC
);
739 r
= locomo_readl(lchip
->base
+ LOCOMO_TADC
);
741 locomo_writel(r
, lchip
->base
+ LOCOMO_TADC
);
745 r
= locomo_readl(lchip
->base
+ LOCOMO_DAC
);
746 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
747 locomo_writel(r
, lchip
->base
+ LOCOMO_DAC
);
749 r
= locomo_readl(lchip
->base
+ LOCOMO_VER
);
750 printk(KERN_INFO
"LoCoMo Chip: %lu%lu\n", (r
>> 8), (r
& 0xff));
753 * The interrupt controller must be initialised before any
754 * other device to ensure that the interrupts are available.
756 if (lchip
->irq
!= NO_IRQ
)
757 locomo_setup_irq(lchip
);
759 for (i
= 0; i
< ARRAY_SIZE(locomo_devices
); i
++)
760 locomo_init_one_child(lchip
, &locomo_devices
[i
]);
768 static int locomo_remove_child(struct device
*dev
, void *data
)
770 device_unregister(dev
);
774 static void __locomo_remove(struct locomo
*lchip
)
776 device_for_each_child(lchip
->dev
, NULL
, locomo_remove_child
);
778 if (lchip
->irq
!= NO_IRQ
) {
779 set_irq_chained_handler(lchip
->irq
, NULL
);
780 set_irq_data(lchip
->irq
, NULL
);
783 iounmap(lchip
->base
);
787 static int locomo_probe(struct platform_device
*dev
)
789 struct resource
*mem
;
792 mem
= platform_get_resource(dev
, IORESOURCE_MEM
, 0);
795 irq
= platform_get_irq(dev
, 0);
799 return __locomo_probe(&dev
->dev
, mem
, irq
);
802 static int locomo_remove(struct platform_device
*dev
)
804 struct locomo
*lchip
= platform_get_drvdata(dev
);
807 __locomo_remove(lchip
);
808 platform_set_drvdata(dev
, NULL
);
815 * Not sure if this should be on the system bus or not yet.
816 * We really want some way to register a system device at
817 * the per-machine level, and then have this driver pick
818 * up the registered devices.
820 static struct platform_driver locomo_device_driver
= {
821 .probe
= locomo_probe
,
822 .remove
= locomo_remove
,
824 .suspend
= locomo_suspend
,
825 .resume
= locomo_resume
,
833 * Get the parent device driver (us) structure
834 * from a child function device
836 static inline struct locomo
*locomo_chip_driver(struct locomo_dev
*ldev
)
838 return (struct locomo
*)dev_get_drvdata(ldev
->dev
.parent
);
841 void locomo_gpio_set_dir(struct device
*dev
, unsigned int bits
, unsigned int dir
)
843 struct locomo
*lchip
= dev_get_drvdata(dev
);
850 spin_lock_irqsave(&lchip
->lock
, flags
);
852 r
= locomo_readl(lchip
->base
+ LOCOMO_GPD
);
857 locomo_writel(r
, lchip
->base
+ LOCOMO_GPD
);
859 r
= locomo_readl(lchip
->base
+ LOCOMO_GPE
);
864 locomo_writel(r
, lchip
->base
+ LOCOMO_GPE
);
866 spin_unlock_irqrestore(&lchip
->lock
, flags
);
869 int locomo_gpio_read_level(struct device
*dev
, unsigned int bits
)
871 struct locomo
*lchip
= dev_get_drvdata(dev
);
878 spin_lock_irqsave(&lchip
->lock
, flags
);
879 ret
= locomo_readl(lchip
->base
+ LOCOMO_GPL
);
880 spin_unlock_irqrestore(&lchip
->lock
, flags
);
886 int locomo_gpio_read_output(struct device
*dev
, unsigned int bits
)
888 struct locomo
*lchip
= dev_get_drvdata(dev
);
895 spin_lock_irqsave(&lchip
->lock
, flags
);
896 ret
= locomo_readl(lchip
->base
+ LOCOMO_GPO
);
897 spin_unlock_irqrestore(&lchip
->lock
, flags
);
903 void locomo_gpio_write(struct device
*dev
, unsigned int bits
, unsigned int set
)
905 struct locomo
*lchip
= dev_get_drvdata(dev
);
912 spin_lock_irqsave(&lchip
->lock
, flags
);
914 r
= locomo_readl(lchip
->base
+ LOCOMO_GPO
);
919 locomo_writel(r
, lchip
->base
+ LOCOMO_GPO
);
921 spin_unlock_irqrestore(&lchip
->lock
, flags
);
924 static void locomo_m62332_sendbit(void *mapbase
, int bit
)
928 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
929 r
&= ~(LOCOMO_DAC_SCLOEB
);
930 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
931 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
932 udelay(DAC_DATA_HOLD_TIME
); /* 300 nsec */
933 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
934 r
&= ~(LOCOMO_DAC_SCLOEB
);
935 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
936 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
937 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
940 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
941 r
|= LOCOMO_DAC_SDAOEB
;
942 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
943 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
945 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
946 r
&= ~(LOCOMO_DAC_SDAOEB
);
947 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
948 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
951 udelay(DAC_DATA_SETUP_TIME
); /* 250 nsec */
952 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
953 r
|= LOCOMO_DAC_SCLOEB
;
954 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
955 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
956 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.0 usec */
959 void locomo_m62332_senddata(struct locomo_dev
*ldev
, unsigned int dac_data
, int channel
)
961 struct locomo
*lchip
= locomo_chip_driver(ldev
);
965 void *mapbase
= lchip
->base
;
968 spin_lock_irqsave(&lchip
->lock
, flags
);
971 udelay(DAC_BUS_FREE_TIME
); /* 5.0 usec */
972 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
973 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
974 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
975 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
976 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.0 usec */
977 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
978 r
&= ~(LOCOMO_DAC_SDAOEB
);
979 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
980 udelay(DAC_START_HOLD_TIME
); /* 5.0 usec */
981 udelay(DAC_DATA_HOLD_TIME
); /* 300 nsec */
983 /* Send slave address and W bit (LSB is W bit) */
984 data
= (M62332_SLAVE_ADDR
<< 1) | M62332_W_BIT
;
985 for (i
= 1; i
<= 8; i
++) {
986 locomo_m62332_sendbit(mapbase
, data
>> (8 - i
));
990 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
991 r
&= ~(LOCOMO_DAC_SCLOEB
);
992 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
993 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
994 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
995 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
996 r
&= ~(LOCOMO_DAC_SDAOEB
);
997 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
998 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
999 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1000 r
|= LOCOMO_DAC_SCLOEB
;
1001 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1002 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1003 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
1004 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
1005 printk(KERN_WARNING
"locomo: m62332_senddata Error 1\n");
1009 /* Send Sub address (LSB is channel select) */
1010 /* channel = 0 : ch1 select */
1011 /* = 1 : ch2 select */
1012 data
= M62332_SUB_ADDR
+ channel
;
1013 for (i
= 1; i
<= 8; i
++) {
1014 locomo_m62332_sendbit(mapbase
, data
>> (8 - i
));
1018 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1019 r
&= ~(LOCOMO_DAC_SCLOEB
);
1020 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1021 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1022 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1023 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1024 r
&= ~(LOCOMO_DAC_SDAOEB
);
1025 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1026 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1027 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1028 r
|= LOCOMO_DAC_SCLOEB
;
1029 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1030 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1031 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
1032 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
1033 printk(KERN_WARNING
"locomo: m62332_senddata Error 2\n");
1038 for (i
= 1; i
<= 8; i
++) {
1039 locomo_m62332_sendbit(mapbase
, dac_data
>> (8 - i
));
1043 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1044 r
&= ~(LOCOMO_DAC_SCLOEB
);
1045 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1046 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1047 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1048 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1049 r
&= ~(LOCOMO_DAC_SDAOEB
);
1050 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1051 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1052 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1053 r
|= LOCOMO_DAC_SCLOEB
;
1054 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1055 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1056 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
1057 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
1058 printk(KERN_WARNING
"locomo: m62332_senddata Error 3\n");
1063 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1064 r
&= ~(LOCOMO_DAC_SCLOEB
);
1065 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1066 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1067 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1068 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1069 r
|= LOCOMO_DAC_SCLOEB
;
1070 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1071 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1072 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4 usec */
1073 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1074 r
|= LOCOMO_DAC_SDAOEB
;
1075 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1076 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1077 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4 usec */
1079 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1080 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
1081 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1082 udelay(DAC_LOW_SETUP_TIME
); /* 1000 nsec */
1083 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1085 spin_unlock_irqrestore(&lchip
->lock
, flags
);
1089 * Frontlight control
1092 static struct locomo
*locomo_chip_driver(struct locomo_dev
*ldev
);
1094 void locomo_frontlight_set(struct locomo_dev
*dev
, int duty
, int vr
, int bpwf
)
1096 unsigned long flags
;
1097 struct locomo
*lchip
= locomo_chip_driver(dev
);
1100 locomo_gpio_write(dev
->dev
.parent
, LOCOMO_GPIO_FL_VR
, 1);
1102 locomo_gpio_write(dev
->dev
.parent
, LOCOMO_GPIO_FL_VR
, 0);
1104 spin_lock_irqsave(&lchip
->lock
, flags
);
1105 locomo_writel(bpwf
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
1107 locomo_writel(duty
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALD
);
1108 locomo_writel(bpwf
| LOCOMO_ALC_EN
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
1109 spin_unlock_irqrestore(&lchip
->lock
, flags
);
1111 EXPORT_SYMBOL(locomo_frontlight_set
);
1114 * LoCoMo "Register Access Bus."
1116 * We model this as a regular bus type, and hang devices directly
1119 static int locomo_match(struct device
*_dev
, struct device_driver
*_drv
)
1121 struct locomo_dev
*dev
= LOCOMO_DEV(_dev
);
1122 struct locomo_driver
*drv
= LOCOMO_DRV(_drv
);
1124 return dev
->devid
== drv
->devid
;
1127 static int locomo_bus_suspend(struct device
*dev
, pm_message_t state
)
1129 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1130 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1133 if (drv
&& drv
->suspend
)
1134 ret
= drv
->suspend(ldev
, state
);
1138 static int locomo_bus_resume(struct device
*dev
)
1140 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1141 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1144 if (drv
&& drv
->resume
)
1145 ret
= drv
->resume(ldev
);
1149 static int locomo_bus_probe(struct device
*dev
)
1151 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1152 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1156 ret
= drv
->probe(ldev
);
1160 static int locomo_bus_remove(struct device
*dev
)
1162 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1163 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1167 ret
= drv
->remove(ldev
);
1171 struct bus_type locomo_bus_type
= {
1172 .name
= "locomo-bus",
1173 .match
= locomo_match
,
1174 .probe
= locomo_bus_probe
,
1175 .remove
= locomo_bus_remove
,
1176 .suspend
= locomo_bus_suspend
,
1177 .resume
= locomo_bus_resume
,
1180 int locomo_driver_register(struct locomo_driver
*driver
)
1182 driver
->drv
.bus
= &locomo_bus_type
;
1183 return driver_register(&driver
->drv
);
1186 void locomo_driver_unregister(struct locomo_driver
*driver
)
1188 driver_unregister(&driver
->drv
);
1191 static int __init
locomo_init(void)
1193 int ret
= bus_register(&locomo_bus_type
);
1195 platform_driver_register(&locomo_device_driver
);
1199 static void __exit
locomo_exit(void)
1201 platform_driver_unregister(&locomo_device_driver
);
1202 bus_unregister(&locomo_bus_type
);
1205 module_init(locomo_init
);
1206 module_exit(locomo_exit
);
1208 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
1209 MODULE_LICENSE("GPL");
1210 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
1212 EXPORT_SYMBOL(locomo_driver_register
);
1213 EXPORT_SYMBOL(locomo_driver_unregister
);
1214 EXPORT_SYMBOL(locomo_gpio_set_dir
);
1215 EXPORT_SYMBOL(locomo_gpio_read_level
);
1216 EXPORT_SYMBOL(locomo_gpio_read_output
);
1217 EXPORT_SYMBOL(locomo_gpio_write
);
1218 EXPORT_SYMBOL(locomo_m62332_senddata
);