OMAP: Add new function to check wether there is irq pending
[linux-ginger.git] / arch / arm / plat-mxc / system.c
blob79c37577c916e17ad45a09151bf2feff28ec99b9
1 /*
2 * Copyright (C) 1999 ARM Limited
3 * Copyright (C) 2000 Deep Blue Solutions Ltd
4 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
5 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
6 * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 #include <linux/kernel.h>
24 #include <linux/clk.h>
25 #include <linux/io.h>
26 #include <linux/err.h>
27 #include <linux/delay.h>
29 #include <mach/hardware.h>
30 #include <asm/proc-fns.h>
31 #include <asm/system.h>
33 #ifdef CONFIG_ARCH_MX1
34 #define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR)
35 #define WDOG_WCR_ENABLE (1 << 0)
36 #else
37 #define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR)
38 #define WDOG_WCR_ENABLE (1 << 2)
39 #endif
42 * Reset the system. It is called by machine_restart().
44 void arch_reset(char mode, const char *cmd)
46 if (!cpu_is_mx1()) {
47 struct clk *clk;
49 clk = clk_get_sys("imx-wdt.0", NULL);
50 if (!IS_ERR(clk))
51 clk_enable(clk);
54 /* Assert SRS signal */
55 __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
57 /* wait for reset to assert... */
58 mdelay(500);
60 printk(KERN_ERR "Watchdog reset failed to assert reset\n");
62 /* delay to allow the serial port to show the message */
63 mdelay(50);
65 /* we'll take a jump through zero as a poor second */
66 cpu_reset(0);