1 #ifndef _ASM_X86_PERCPU_H
2 #define _ASM_X86_PERCPU_H
5 #define __percpu_seg gs
6 #define __percpu_mov_op movq
8 #define __percpu_seg fs
9 #define __percpu_mov_op movl
15 * PER_CPU finds an address of a per-cpu variable.
19 * reg - 32bit register
21 * The resulting address is stored in the "reg" argument.
24 * PER_CPU(cpu_gdt_descr, %ebx)
27 #define PER_CPU(var, reg) \
28 __percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg; \
29 lea per_cpu__##var(reg), reg
30 #define PER_CPU_VAR(var) %__percpu_seg:per_cpu__##var
32 #define PER_CPU(var, reg) \
33 __percpu_mov_op $per_cpu__##var, reg
34 #define PER_CPU_VAR(var) per_cpu__##var
37 #ifdef CONFIG_X86_64_SMP
38 #define INIT_PER_CPU_VAR(var) init_per_cpu__##var
40 #define INIT_PER_CPU_VAR(var) per_cpu__##var
43 #else /* ...!ASSEMBLY */
45 #include <linux/stringify.h>
48 #define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x
49 #define __my_cpu_offset percpu_read(this_cpu_off)
51 #define __percpu_arg(x) "%" #x
55 * Initialized pointers to per-cpu variables needed for the boot
56 * processor need to use these macros to get the proper address
57 * offset from __per_cpu_load on SMP.
59 * There also must be an entry in vmlinux_64.lds.S
61 #define DECLARE_INIT_PER_CPU(var) \
62 extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
64 #ifdef CONFIG_X86_64_SMP
65 #define init_per_cpu_var(var) init_per_cpu__##var
67 #define init_per_cpu_var(var) per_cpu_var(var)
70 /* For arch-specific code, we can use direct single-insn ops (they
71 * don't give an lvalue though). */
72 extern void __bad_percpu_size(void);
74 #define percpu_to_op(op, var, val) \
76 typedef typeof(var) T__; \
81 switch (sizeof(var)) { \
83 asm(op "b %1,"__percpu_arg(0) \
85 : "qi" ((T__)(val))); \
88 asm(op "w %1,"__percpu_arg(0) \
90 : "ri" ((T__)(val))); \
93 asm(op "l %1,"__percpu_arg(0) \
95 : "ri" ((T__)(val))); \
98 asm(op "q %1,"__percpu_arg(0) \
100 : "re" ((T__)(val))); \
102 default: __bad_percpu_size(); \
106 #define percpu_from_op(op, var) \
109 switch (sizeof(var)) { \
111 asm(op "b "__percpu_arg(1)",%0" \
116 asm(op "w "__percpu_arg(1)",%0" \
121 asm(op "l "__percpu_arg(1)",%0" \
126 asm(op "q "__percpu_arg(1)",%0" \
130 default: __bad_percpu_size(); \
135 #define percpu_read(var) percpu_from_op("mov", per_cpu__##var)
136 #define percpu_write(var, val) percpu_to_op("mov", per_cpu__##var, val)
137 #define percpu_add(var, val) percpu_to_op("add", per_cpu__##var, val)
138 #define percpu_sub(var, val) percpu_to_op("sub", per_cpu__##var, val)
139 #define percpu_and(var, val) percpu_to_op("and", per_cpu__##var, val)
140 #define percpu_or(var, val) percpu_to_op("or", per_cpu__##var, val)
141 #define percpu_xor(var, val) percpu_to_op("xor", per_cpu__##var, val)
143 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
144 #define x86_test_and_clear_bit_percpu(bit, var) \
147 asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0" \
148 : "=r" (old__), "+m" (per_cpu__##var) \
153 #include <asm-generic/percpu.h>
155 /* We can use this directly for local CPU (faster). */
156 DECLARE_PER_CPU(unsigned long, this_cpu_off
);
158 #endif /* !__ASSEMBLY__ */
163 * Define the "EARLY_PER_CPU" macros. These are used for some per_cpu
164 * variables that are initialized and accessed before there are per_cpu
168 #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
169 DEFINE_PER_CPU(_type, _name) = _initvalue; \
170 __typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
171 { [0 ... NR_CPUS-1] = _initvalue }; \
172 __typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
174 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
175 EXPORT_PER_CPU_SYMBOL(_name)
177 #define DECLARE_EARLY_PER_CPU(_type, _name) \
178 DECLARE_PER_CPU(_type, _name); \
179 extern __typeof__(_type) *_name##_early_ptr; \
180 extern __typeof__(_type) _name##_early_map[]
182 #define early_per_cpu_ptr(_name) (_name##_early_ptr)
183 #define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
184 #define early_per_cpu(_name, _cpu) \
185 *(early_per_cpu_ptr(_name) ? \
186 &early_per_cpu_ptr(_name)[_cpu] : \
187 &per_cpu(_name, _cpu))
189 #else /* !CONFIG_SMP */
190 #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
191 DEFINE_PER_CPU(_type, _name) = _initvalue
193 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
194 EXPORT_PER_CPU_SYMBOL(_name)
196 #define DECLARE_EARLY_PER_CPU(_type, _name) \
197 DECLARE_PER_CPU(_type, _name)
199 #define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
200 #define early_per_cpu_ptr(_name) NULL
201 /* no early_per_cpu_map() */
203 #endif /* !CONFIG_SMP */
205 #endif /* _ASM_X86_PERCPU_H */