OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / arm / mach-at91 / at91sam9261.c
blob3acd7d7e6a423116411805f7b546099ba674d447
1 /*
2 * arch/arm/mach-at91/at91sam9261.c
4 * Copyright (C) 2005 SAN People
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
14 #include <linux/pm.h>
16 #include <asm/irq.h>
17 #include <asm/mach/arch.h>
18 #include <asm/mach/map.h>
19 #include <mach/at91sam9261.h>
20 #include <mach/at91_pmc.h>
21 #include <mach/at91_rstc.h>
22 #include <mach/at91_shdwc.h>
24 #include "generic.h"
25 #include "clock.h"
27 static struct map_desc at91sam9261_io_desc[] __initdata = {
29 .virtual = AT91_VA_BASE_SYS,
30 .pfn = __phys_to_pfn(AT91_BASE_SYS),
31 .length = SZ_16K,
32 .type = MT_DEVICE,
33 }, {
34 .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
35 .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
36 .length = AT91SAM9261_SRAM_SIZE,
37 .type = MT_DEVICE,
41 /* --------------------------------------------------------------------
42 * Clocks
43 * -------------------------------------------------------------------- */
46 * The peripheral clocks.
48 static struct clk pioA_clk = {
49 .name = "pioA_clk",
50 .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
51 .type = CLK_TYPE_PERIPHERAL,
53 static struct clk pioB_clk = {
54 .name = "pioB_clk",
55 .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
56 .type = CLK_TYPE_PERIPHERAL,
58 static struct clk pioC_clk = {
59 .name = "pioC_clk",
60 .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
61 .type = CLK_TYPE_PERIPHERAL,
63 static struct clk usart0_clk = {
64 .name = "usart0_clk",
65 .pmc_mask = 1 << AT91SAM9261_ID_US0,
66 .type = CLK_TYPE_PERIPHERAL,
68 static struct clk usart1_clk = {
69 .name = "usart1_clk",
70 .pmc_mask = 1 << AT91SAM9261_ID_US1,
71 .type = CLK_TYPE_PERIPHERAL,
73 static struct clk usart2_clk = {
74 .name = "usart2_clk",
75 .pmc_mask = 1 << AT91SAM9261_ID_US2,
76 .type = CLK_TYPE_PERIPHERAL,
78 static struct clk mmc_clk = {
79 .name = "mci_clk",
80 .pmc_mask = 1 << AT91SAM9261_ID_MCI,
81 .type = CLK_TYPE_PERIPHERAL,
83 static struct clk udc_clk = {
84 .name = "udc_clk",
85 .pmc_mask = 1 << AT91SAM9261_ID_UDP,
86 .type = CLK_TYPE_PERIPHERAL,
88 static struct clk twi_clk = {
89 .name = "twi_clk",
90 .pmc_mask = 1 << AT91SAM9261_ID_TWI,
91 .type = CLK_TYPE_PERIPHERAL,
93 static struct clk spi0_clk = {
94 .name = "spi0_clk",
95 .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
96 .type = CLK_TYPE_PERIPHERAL,
98 static struct clk spi1_clk = {
99 .name = "spi1_clk",
100 .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
101 .type = CLK_TYPE_PERIPHERAL,
103 static struct clk ssc0_clk = {
104 .name = "ssc0_clk",
105 .pmc_mask = 1 << AT91SAM9261_ID_SSC0,
106 .type = CLK_TYPE_PERIPHERAL,
108 static struct clk ssc1_clk = {
109 .name = "ssc1_clk",
110 .pmc_mask = 1 << AT91SAM9261_ID_SSC1,
111 .type = CLK_TYPE_PERIPHERAL,
113 static struct clk ssc2_clk = {
114 .name = "ssc2_clk",
115 .pmc_mask = 1 << AT91SAM9261_ID_SSC2,
116 .type = CLK_TYPE_PERIPHERAL,
118 static struct clk tc0_clk = {
119 .name = "tc0_clk",
120 .pmc_mask = 1 << AT91SAM9261_ID_TC0,
121 .type = CLK_TYPE_PERIPHERAL,
123 static struct clk tc1_clk = {
124 .name = "tc1_clk",
125 .pmc_mask = 1 << AT91SAM9261_ID_TC1,
126 .type = CLK_TYPE_PERIPHERAL,
128 static struct clk tc2_clk = {
129 .name = "tc2_clk",
130 .pmc_mask = 1 << AT91SAM9261_ID_TC2,
131 .type = CLK_TYPE_PERIPHERAL,
133 static struct clk ohci_clk = {
134 .name = "ohci_clk",
135 .pmc_mask = 1 << AT91SAM9261_ID_UHP,
136 .type = CLK_TYPE_PERIPHERAL,
138 static struct clk lcdc_clk = {
139 .name = "lcdc_clk",
140 .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
141 .type = CLK_TYPE_PERIPHERAL,
144 static struct clk *periph_clocks[] __initdata = {
145 &pioA_clk,
146 &pioB_clk,
147 &pioC_clk,
148 &usart0_clk,
149 &usart1_clk,
150 &usart2_clk,
151 &mmc_clk,
152 &udc_clk,
153 &twi_clk,
154 &spi0_clk,
155 &spi1_clk,
156 &ssc0_clk,
157 &ssc1_clk,
158 &ssc2_clk,
159 &tc0_clk,
160 &tc1_clk,
161 &tc2_clk,
162 &ohci_clk,
163 &lcdc_clk,
164 // irq0 .. irq2
168 * The four programmable clocks.
169 * You must configure pin multiplexing to bring these signals out.
171 static struct clk pck0 = {
172 .name = "pck0",
173 .pmc_mask = AT91_PMC_PCK0,
174 .type = CLK_TYPE_PROGRAMMABLE,
175 .id = 0,
177 static struct clk pck1 = {
178 .name = "pck1",
179 .pmc_mask = AT91_PMC_PCK1,
180 .type = CLK_TYPE_PROGRAMMABLE,
181 .id = 1,
183 static struct clk pck2 = {
184 .name = "pck2",
185 .pmc_mask = AT91_PMC_PCK2,
186 .type = CLK_TYPE_PROGRAMMABLE,
187 .id = 2,
189 static struct clk pck3 = {
190 .name = "pck3",
191 .pmc_mask = AT91_PMC_PCK3,
192 .type = CLK_TYPE_PROGRAMMABLE,
193 .id = 3,
196 /* HClocks */
197 static struct clk hck0 = {
198 .name = "hck0",
199 .pmc_mask = AT91_PMC_HCK0,
200 .type = CLK_TYPE_SYSTEM,
201 .id = 0,
203 static struct clk hck1 = {
204 .name = "hck1",
205 .pmc_mask = AT91_PMC_HCK1,
206 .type = CLK_TYPE_SYSTEM,
207 .id = 1,
210 static void __init at91sam9261_register_clocks(void)
212 int i;
214 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
215 clk_register(periph_clocks[i]);
217 clk_register(&pck0);
218 clk_register(&pck1);
219 clk_register(&pck2);
220 clk_register(&pck3);
222 clk_register(&hck0);
223 clk_register(&hck1);
226 /* --------------------------------------------------------------------
227 * GPIO
228 * -------------------------------------------------------------------- */
230 static struct at91_gpio_bank at91sam9261_gpio[] = {
232 .id = AT91SAM9261_ID_PIOA,
233 .offset = AT91_PIOA,
234 .clock = &pioA_clk,
235 }, {
236 .id = AT91SAM9261_ID_PIOB,
237 .offset = AT91_PIOB,
238 .clock = &pioB_clk,
239 }, {
240 .id = AT91SAM9261_ID_PIOC,
241 .offset = AT91_PIOC,
242 .clock = &pioC_clk,
246 static void at91sam9261_reset(void)
248 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
251 static void at91sam9261_poweroff(void)
253 at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
257 /* --------------------------------------------------------------------
258 * AT91SAM9261 processor initialization
259 * -------------------------------------------------------------------- */
261 void __init at91sam9261_initialize(unsigned long main_clock)
263 /* Map peripherals */
264 iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
266 at91_arch_reset = at91sam9261_reset;
267 pm_power_off = at91sam9261_poweroff;
268 at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
269 | (1 << AT91SAM9261_ID_IRQ2);
271 /* Init clock subsystem */
272 at91_clock_init(main_clock);
274 /* Register the processor-specific clocks */
275 at91sam9261_register_clocks();
277 /* Register GPIO subsystem */
278 at91_gpio_init(at91sam9261_gpio, 3);
281 /* --------------------------------------------------------------------
282 * Interrupt initialization
283 * -------------------------------------------------------------------- */
286 * The default interrupt priority levels (0 = lowest, 7 = highest).
288 static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
289 7, /* Advanced Interrupt Controller */
290 7, /* System Peripherals */
291 1, /* Parallel IO Controller A */
292 1, /* Parallel IO Controller B */
293 1, /* Parallel IO Controller C */
295 5, /* USART 0 */
296 5, /* USART 1 */
297 5, /* USART 2 */
298 0, /* Multimedia Card Interface */
299 2, /* USB Device Port */
300 6, /* Two-Wire Interface */
301 5, /* Serial Peripheral Interface 0 */
302 5, /* Serial Peripheral Interface 1 */
303 4, /* Serial Synchronous Controller 0 */
304 4, /* Serial Synchronous Controller 1 */
305 4, /* Serial Synchronous Controller 2 */
306 0, /* Timer Counter 0 */
307 0, /* Timer Counter 1 */
308 0, /* Timer Counter 2 */
309 2, /* USB Host port */
310 3, /* LCD Controller */
318 0, /* Advanced Interrupt Controller */
319 0, /* Advanced Interrupt Controller */
320 0, /* Advanced Interrupt Controller */
323 void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
325 if (!priority)
326 priority = at91sam9261_default_irq_priority;
328 /* Initialize the AIC interrupt controller */
329 at91_aic_init(priority);
331 /* Enable GPIO interrupts */
332 at91_gpio_irq_setup();