OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / arm / mach-omap1 / clock.c
blob436eed22801beb51ebaac7fcdf4a59159cc40831
1 /*
2 * linux/arch/arm/mach-omap1/clock.c
4 * Copyright (C) 2004 - 2005 Nokia corporation
5 * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
7 * Modified to use omap shared clock framework by
8 * Tony Lindgren <tony@atomide.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/list.h>
17 #include <linux/errno.h>
18 #include <linux/err.h>
19 #include <linux/clk.h>
20 #include <linux/io.h>
22 #include <asm/mach-types.h>
23 #include <asm/clkdev.h>
25 #include <mach/cpu.h>
26 #include <mach/usb.h>
27 #include <mach/clock.h>
28 #include <mach/sram.h>
30 static const struct clkops clkops_generic;
31 static const struct clkops clkops_uart;
32 static const struct clkops clkops_dspck;
34 #include "clock.h"
36 static int clk_omap1_dummy_enable(struct clk *clk)
38 return 0;
41 static void clk_omap1_dummy_disable(struct clk *clk)
45 static const struct clkops clkops_dummy = {
46 .enable = clk_omap1_dummy_enable,
47 .disable = clk_omap1_dummy_disable,
50 static struct clk dummy_ck = {
51 .name = "dummy",
52 .ops = &clkops_dummy,
53 .flags = RATE_FIXED,
56 struct omap_clk {
57 u32 cpu;
58 struct clk_lookup lk;
61 #define CLK(dev, con, ck, cp) \
62 { \
63 .cpu = cp, \
64 .lk = { \
65 .dev_id = dev, \
66 .con_id = con, \
67 .clk = ck, \
68 }, \
71 #define CK_310 (1 << 0)
72 #define CK_730 (1 << 1)
73 #define CK_1510 (1 << 2)
74 #define CK_16XX (1 << 3)
76 static struct omap_clk omap_clks[] = {
77 /* non-ULPD clocks */
78 CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
79 CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
80 /* CK_GEN1 clocks */
81 CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
82 CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
83 CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
84 CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
85 CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
86 CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
87 CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
88 CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
89 CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
90 CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
91 CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
92 CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
93 /* CK_GEN2 clocks */
94 CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
95 CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
96 CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
97 CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
98 CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
99 /* CK_GEN3 clocks */
100 CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
101 CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
102 CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
103 CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
104 CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
105 CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
106 CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
107 CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
108 CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
109 CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
110 CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
111 CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
112 CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
113 /* ULPD clocks */
114 CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
115 CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
116 CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
117 CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
118 CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
119 CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
120 CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
121 CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
122 CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
123 CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
124 CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
125 CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
126 CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
127 CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
128 CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
129 CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
130 CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
131 /* Virtual clocks */
132 CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
133 CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
134 CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
135 CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
136 CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
137 CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
138 CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
139 CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
140 CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
141 CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
142 CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
143 CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
144 CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
145 CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
148 static int omap1_clk_enable_generic(struct clk * clk);
149 static int omap1_clk_enable(struct clk *clk);
150 static void omap1_clk_disable_generic(struct clk * clk);
151 static void omap1_clk_disable(struct clk *clk);
153 __u32 arm_idlect1_mask;
155 /*-------------------------------------------------------------------------
156 * Omap1 specific clock functions
157 *-------------------------------------------------------------------------*/
159 static unsigned long omap1_watchdog_recalc(struct clk *clk)
161 return clk->parent->rate / 14;
164 static unsigned long omap1_uart_recalc(struct clk *clk)
166 unsigned int val = __raw_readl(clk->enable_reg);
167 return val & clk->enable_bit ? 48000000 : 12000000;
170 static unsigned long omap1_sossi_recalc(struct clk *clk)
172 u32 div = omap_readl(MOD_CONF_CTRL_1);
174 div = (div >> 17) & 0x7;
175 div++;
177 return clk->parent->rate / div;
180 static int omap1_clk_enable_dsp_domain(struct clk *clk)
182 int retval;
184 retval = omap1_clk_enable(&api_ck.clk);
185 if (!retval) {
186 retval = omap1_clk_enable_generic(clk);
187 omap1_clk_disable(&api_ck.clk);
190 return retval;
193 static void omap1_clk_disable_dsp_domain(struct clk *clk)
195 if (omap1_clk_enable(&api_ck.clk) == 0) {
196 omap1_clk_disable_generic(clk);
197 omap1_clk_disable(&api_ck.clk);
201 static const struct clkops clkops_dspck = {
202 .enable = &omap1_clk_enable_dsp_domain,
203 .disable = &omap1_clk_disable_dsp_domain,
206 static int omap1_clk_enable_uart_functional(struct clk *clk)
208 int ret;
209 struct uart_clk *uclk;
211 ret = omap1_clk_enable_generic(clk);
212 if (ret == 0) {
213 /* Set smart idle acknowledgement mode */
214 uclk = (struct uart_clk *)clk;
215 omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
216 uclk->sysc_addr);
219 return ret;
222 static void omap1_clk_disable_uart_functional(struct clk *clk)
224 struct uart_clk *uclk;
226 /* Set force idle acknowledgement mode */
227 uclk = (struct uart_clk *)clk;
228 omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
230 omap1_clk_disable_generic(clk);
233 static const struct clkops clkops_uart = {
234 .enable = &omap1_clk_enable_uart_functional,
235 .disable = &omap1_clk_disable_uart_functional,
238 static void omap1_clk_allow_idle(struct clk *clk)
240 struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
242 if (!(clk->flags & CLOCK_IDLE_CONTROL))
243 return;
245 if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
246 arm_idlect1_mask |= 1 << iclk->idlect_shift;
249 static void omap1_clk_deny_idle(struct clk *clk)
251 struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
253 if (!(clk->flags & CLOCK_IDLE_CONTROL))
254 return;
256 if (iclk->no_idle_count++ == 0)
257 arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
260 static __u16 verify_ckctl_value(__u16 newval)
262 /* This function checks for following limitations set
263 * by the hardware (all conditions must be true):
264 * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2
265 * ARM_CK >= TC_CK
266 * DSP_CK >= TC_CK
267 * DSPMMU_CK >= TC_CK
269 * In addition following rules are enforced:
270 * LCD_CK <= TC_CK
271 * ARMPER_CK <= TC_CK
273 * However, maximum frequencies are not checked for!
275 __u8 per_exp;
276 __u8 lcd_exp;
277 __u8 arm_exp;
278 __u8 dsp_exp;
279 __u8 tc_exp;
280 __u8 dspmmu_exp;
282 per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
283 lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
284 arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
285 dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
286 tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
287 dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
289 if (dspmmu_exp < dsp_exp)
290 dspmmu_exp = dsp_exp;
291 if (dspmmu_exp > dsp_exp+1)
292 dspmmu_exp = dsp_exp+1;
293 if (tc_exp < arm_exp)
294 tc_exp = arm_exp;
295 if (tc_exp < dspmmu_exp)
296 tc_exp = dspmmu_exp;
297 if (tc_exp > lcd_exp)
298 lcd_exp = tc_exp;
299 if (tc_exp > per_exp)
300 per_exp = tc_exp;
302 newval &= 0xf000;
303 newval |= per_exp << CKCTL_PERDIV_OFFSET;
304 newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
305 newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
306 newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
307 newval |= tc_exp << CKCTL_TCDIV_OFFSET;
308 newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
310 return newval;
313 static int calc_dsor_exp(struct clk *clk, unsigned long rate)
315 /* Note: If target frequency is too low, this function will return 4,
316 * which is invalid value. Caller must check for this value and act
317 * accordingly.
319 * Note: This function does not check for following limitations set
320 * by the hardware (all conditions must be true):
321 * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2
322 * ARM_CK >= TC_CK
323 * DSP_CK >= TC_CK
324 * DSPMMU_CK >= TC_CK
326 unsigned long realrate;
327 struct clk * parent;
328 unsigned dsor_exp;
330 parent = clk->parent;
331 if (unlikely(parent == NULL))
332 return -EIO;
334 realrate = parent->rate;
335 for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
336 if (realrate <= rate)
337 break;
339 realrate /= 2;
342 return dsor_exp;
345 static unsigned long omap1_ckctl_recalc(struct clk *clk)
347 /* Calculate divisor encoded as 2-bit exponent */
348 int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
350 return clk->parent->rate / dsor;
353 static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
355 int dsor;
357 /* Calculate divisor encoded as 2-bit exponent
359 * The clock control bits are in DSP domain,
360 * so api_ck is needed for access.
361 * Note that DSP_CKCTL virt addr = phys addr, so
362 * we must use __raw_readw() instead of omap_readw().
364 omap1_clk_enable(&api_ck.clk);
365 dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
366 omap1_clk_disable(&api_ck.clk);
368 return clk->parent->rate / dsor;
371 /* MPU virtual clock functions */
372 static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
374 /* Find the highest supported frequency <= rate and switch to it */
375 struct mpu_rate * ptr;
377 if (clk != &virtual_ck_mpu)
378 return -EINVAL;
380 for (ptr = rate_table; ptr->rate; ptr++) {
381 if (ptr->xtal != ck_ref.rate)
382 continue;
384 /* DPLL1 cannot be reprogrammed without risking system crash */
385 if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
386 continue;
388 /* Can check only after xtal frequency check */
389 if (ptr->rate <= rate)
390 break;
393 if (!ptr->rate)
394 return -EINVAL;
397 * In most cases we should not need to reprogram DPLL.
398 * Reprogramming the DPLL is tricky, it must be done from SRAM.
399 * (on 730, bit 13 must always be 1)
401 if (cpu_is_omap730())
402 omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
403 else
404 omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
406 ck_dpll1.rate = ptr->pll_rate;
407 return 0;
410 static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
412 int dsor_exp;
413 u16 regval;
415 dsor_exp = calc_dsor_exp(clk, rate);
416 if (dsor_exp > 3)
417 dsor_exp = -EINVAL;
418 if (dsor_exp < 0)
419 return dsor_exp;
421 regval = __raw_readw(DSP_CKCTL);
422 regval &= ~(3 << clk->rate_offset);
423 regval |= dsor_exp << clk->rate_offset;
424 __raw_writew(regval, DSP_CKCTL);
425 clk->rate = clk->parent->rate / (1 << dsor_exp);
427 return 0;
430 static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
432 int dsor_exp = calc_dsor_exp(clk, rate);
433 if (dsor_exp < 0)
434 return dsor_exp;
435 if (dsor_exp > 3)
436 dsor_exp = 3;
437 return clk->parent->rate / (1 << dsor_exp);
440 static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
442 int dsor_exp;
443 u16 regval;
445 dsor_exp = calc_dsor_exp(clk, rate);
446 if (dsor_exp > 3)
447 dsor_exp = -EINVAL;
448 if (dsor_exp < 0)
449 return dsor_exp;
451 regval = omap_readw(ARM_CKCTL);
452 regval &= ~(3 << clk->rate_offset);
453 regval |= dsor_exp << clk->rate_offset;
454 regval = verify_ckctl_value(regval);
455 omap_writew(regval, ARM_CKCTL);
456 clk->rate = clk->parent->rate / (1 << dsor_exp);
457 return 0;
460 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
462 /* Find the highest supported frequency <= rate */
463 struct mpu_rate * ptr;
464 long highest_rate;
466 if (clk != &virtual_ck_mpu)
467 return -EINVAL;
469 highest_rate = -EINVAL;
471 for (ptr = rate_table; ptr->rate; ptr++) {
472 if (ptr->xtal != ck_ref.rate)
473 continue;
475 highest_rate = ptr->rate;
477 /* Can check only after xtal frequency check */
478 if (ptr->rate <= rate)
479 break;
482 return highest_rate;
485 static unsigned calc_ext_dsor(unsigned long rate)
487 unsigned dsor;
489 /* MCLK and BCLK divisor selection is not linear:
490 * freq = 96MHz / dsor
492 * RATIO_SEL range: dsor <-> RATIO_SEL
493 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
494 * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
495 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
496 * can not be used.
498 for (dsor = 2; dsor < 96; ++dsor) {
499 if ((dsor & 1) && dsor > 8)
500 continue;
501 if (rate >= 96000000 / dsor)
502 break;
504 return dsor;
507 /* Only needed on 1510 */
508 static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
510 unsigned int val;
512 val = __raw_readl(clk->enable_reg);
513 if (rate == 12000000)
514 val &= ~(1 << clk->enable_bit);
515 else if (rate == 48000000)
516 val |= (1 << clk->enable_bit);
517 else
518 return -EINVAL;
519 __raw_writel(val, clk->enable_reg);
520 clk->rate = rate;
522 return 0;
525 /* External clock (MCLK & BCLK) functions */
526 static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
528 unsigned dsor;
529 __u16 ratio_bits;
531 dsor = calc_ext_dsor(rate);
532 clk->rate = 96000000 / dsor;
533 if (dsor > 8)
534 ratio_bits = ((dsor - 8) / 2 + 6) << 2;
535 else
536 ratio_bits = (dsor - 2) << 2;
538 ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
539 __raw_writew(ratio_bits, clk->enable_reg);
541 return 0;
544 static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
546 u32 l;
547 int div;
548 unsigned long p_rate;
550 p_rate = clk->parent->rate;
551 /* Round towards slower frequency */
552 div = (p_rate + rate - 1) / rate;
553 div--;
554 if (div < 0 || div > 7)
555 return -EINVAL;
557 l = omap_readl(MOD_CONF_CTRL_1);
558 l &= ~(7 << 17);
559 l |= div << 17;
560 omap_writel(l, MOD_CONF_CTRL_1);
562 clk->rate = p_rate / (div + 1);
564 return 0;
567 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
569 return 96000000 / calc_ext_dsor(rate);
572 static void omap1_init_ext_clk(struct clk * clk)
574 unsigned dsor;
575 __u16 ratio_bits;
577 /* Determine current rate and ensure clock is based on 96MHz APLL */
578 ratio_bits = __raw_readw(clk->enable_reg) & ~1;
579 __raw_writew(ratio_bits, clk->enable_reg);
581 ratio_bits = (ratio_bits & 0xfc) >> 2;
582 if (ratio_bits > 6)
583 dsor = (ratio_bits - 6) * 2 + 8;
584 else
585 dsor = ratio_bits + 2;
587 clk-> rate = 96000000 / dsor;
590 static int omap1_clk_enable(struct clk *clk)
592 int ret = 0;
594 if (clk->usecount++ == 0) {
595 if (clk->parent) {
596 ret = omap1_clk_enable(clk->parent);
597 if (ret)
598 goto err;
600 if (clk->flags & CLOCK_NO_IDLE_PARENT)
601 omap1_clk_deny_idle(clk->parent);
604 ret = clk->ops->enable(clk);
605 if (ret) {
606 if (clk->parent)
607 omap1_clk_disable(clk->parent);
608 goto err;
611 return ret;
613 err:
614 clk->usecount--;
615 return ret;
618 static void omap1_clk_disable(struct clk *clk)
620 if (clk->usecount > 0 && !(--clk->usecount)) {
621 clk->ops->disable(clk);
622 if (likely(clk->parent)) {
623 omap1_clk_disable(clk->parent);
624 if (clk->flags & CLOCK_NO_IDLE_PARENT)
625 omap1_clk_allow_idle(clk->parent);
630 static int omap1_clk_enable_generic(struct clk *clk)
632 __u16 regval16;
633 __u32 regval32;
635 if (unlikely(clk->enable_reg == NULL)) {
636 printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
637 clk->name);
638 return -EINVAL;
641 if (clk->flags & ENABLE_REG_32BIT) {
642 regval32 = __raw_readl(clk->enable_reg);
643 regval32 |= (1 << clk->enable_bit);
644 __raw_writel(regval32, clk->enable_reg);
645 } else {
646 regval16 = __raw_readw(clk->enable_reg);
647 regval16 |= (1 << clk->enable_bit);
648 __raw_writew(regval16, clk->enable_reg);
651 return 0;
654 static void omap1_clk_disable_generic(struct clk *clk)
656 __u16 regval16;
657 __u32 regval32;
659 if (clk->enable_reg == NULL)
660 return;
662 if (clk->flags & ENABLE_REG_32BIT) {
663 regval32 = __raw_readl(clk->enable_reg);
664 regval32 &= ~(1 << clk->enable_bit);
665 __raw_writel(regval32, clk->enable_reg);
666 } else {
667 regval16 = __raw_readw(clk->enable_reg);
668 regval16 &= ~(1 << clk->enable_bit);
669 __raw_writew(regval16, clk->enable_reg);
673 static const struct clkops clkops_generic = {
674 .enable = &omap1_clk_enable_generic,
675 .disable = &omap1_clk_disable_generic,
678 static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
680 if (clk->flags & RATE_FIXED)
681 return clk->rate;
683 if (clk->round_rate != NULL)
684 return clk->round_rate(clk, rate);
686 return clk->rate;
689 static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
691 int ret = -EINVAL;
693 if (clk->set_rate)
694 ret = clk->set_rate(clk, rate);
695 return ret;
698 /*-------------------------------------------------------------------------
699 * Omap1 clock reset and init functions
700 *-------------------------------------------------------------------------*/
702 #ifdef CONFIG_OMAP_RESET_CLOCKS
704 static void __init omap1_clk_disable_unused(struct clk *clk)
706 __u32 regval32;
708 /* Clocks in the DSP domain need api_ck. Just assume bootloader
709 * has not enabled any DSP clocks */
710 if (clk->enable_reg == DSP_IDLECT2) {
711 printk(KERN_INFO "Skipping reset check for DSP domain "
712 "clock \"%s\"\n", clk->name);
713 return;
716 /* Is the clock already disabled? */
717 if (clk->flags & ENABLE_REG_32BIT)
718 regval32 = __raw_readl(clk->enable_reg);
719 else
720 regval32 = __raw_readw(clk->enable_reg);
722 if ((regval32 & (1 << clk->enable_bit)) == 0)
723 return;
725 /* FIXME: This clock seems to be necessary but no-one
726 * has asked for its activation. */
727 if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */
728 || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */
729 || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */
731 printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
732 clk->name);
733 return;
736 printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
737 clk->ops->disable(clk);
738 printk(" done\n");
741 #else
742 #define omap1_clk_disable_unused NULL
743 #endif
745 static struct clk_functions omap1_clk_functions = {
746 .clk_enable = omap1_clk_enable,
747 .clk_disable = omap1_clk_disable,
748 .clk_round_rate = omap1_clk_round_rate,
749 .clk_set_rate = omap1_clk_set_rate,
750 .clk_disable_unused = omap1_clk_disable_unused,
753 int __init omap1_clk_init(void)
755 struct omap_clk *c;
756 const struct omap_clock_config *info;
757 int crystal_type = 0; /* Default 12 MHz */
758 u32 reg, cpu_mask;
760 #ifdef CONFIG_DEBUG_LL
761 /* Resets some clocks that may be left on from bootloader,
762 * but leaves serial clocks on.
764 omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
765 #endif
767 /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
768 reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
769 omap_writew(reg, SOFT_REQ_REG);
770 if (!cpu_is_omap15xx())
771 omap_writew(0, SOFT_REQ_REG2);
773 clk_init(&omap1_clk_functions);
775 /* By default all idlect1 clocks are allowed to idle */
776 arm_idlect1_mask = ~0;
778 for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
779 clk_preinit(c->lk.clk);
781 cpu_mask = 0;
782 if (cpu_is_omap16xx())
783 cpu_mask |= CK_16XX;
784 if (cpu_is_omap1510())
785 cpu_mask |= CK_1510;
786 if (cpu_is_omap730())
787 cpu_mask |= CK_730;
788 if (cpu_is_omap310())
789 cpu_mask |= CK_310;
791 for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
792 if (c->cpu & cpu_mask) {
793 clkdev_add(&c->lk);
794 clk_register(c->lk.clk);
797 info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
798 if (info != NULL) {
799 if (!cpu_is_omap15xx())
800 crystal_type = info->system_clock_type;
803 #if defined(CONFIG_ARCH_OMAP730)
804 ck_ref.rate = 13000000;
805 #elif defined(CONFIG_ARCH_OMAP16XX)
806 if (crystal_type == 2)
807 ck_ref.rate = 19200000;
808 #endif
810 printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
811 omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
812 omap_readw(ARM_CKCTL));
814 /* We want to be in syncronous scalable mode */
815 omap_writew(0x1000, ARM_SYSST);
817 #ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
818 /* Use values set by bootloader. Determine PLL rate and recalculate
819 * dependent clocks as if kernel had changed PLL or divisors.
822 unsigned pll_ctl_val = omap_readw(DPLL_CTL);
824 ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
825 if (pll_ctl_val & 0x10) {
826 /* PLL enabled, apply multiplier and divisor */
827 if (pll_ctl_val & 0xf80)
828 ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
829 ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
830 } else {
831 /* PLL disabled, apply bypass divisor */
832 switch (pll_ctl_val & 0xc) {
833 case 0:
834 break;
835 case 0x4:
836 ck_dpll1.rate /= 2;
837 break;
838 default:
839 ck_dpll1.rate /= 4;
840 break;
844 #else
845 /* Find the highest supported frequency and enable it */
846 if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
847 printk(KERN_ERR "System frequencies not set. Check your config.\n");
848 /* Guess sane values (60MHz) */
849 omap_writew(0x2290, DPLL_CTL);
850 omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
851 ck_dpll1.rate = 60000000;
853 #endif
854 propagate_rate(&ck_dpll1);
855 /* Cache rates for clocks connected to ck_ref (not dpll1) */
856 propagate_rate(&ck_ref);
857 printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
858 "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
859 ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
860 ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
861 arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
863 #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
864 /* Select slicer output as OMAP input clock */
865 omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
866 #endif
868 /* Amstrad Delta wants BCLK high when inactive */
869 if (machine_is_ams_delta())
870 omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
871 (1 << SDW_MCLK_INV_BIT),
872 ULPD_CLOCK_CTRL);
874 /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
875 /* (on 730, bit 13 must not be cleared) */
876 if (cpu_is_omap730())
877 omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
878 else
879 omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
881 /* Put DSP/MPUI into reset until needed */
882 omap_writew(0, ARM_RSTCT1);
883 omap_writew(1, ARM_RSTCT2);
884 omap_writew(0x400, ARM_IDLECT1);
887 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
888 * of the ARM_IDLECT2 register must be set to zero. The power-on
889 * default value of this bit is one.
891 omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
894 * Only enable those clocks we will need, let the drivers
895 * enable other clocks as necessary
897 clk_enable(&armper_ck.clk);
898 clk_enable(&armxor_ck.clk);
899 clk_enable(&armtim_ck.clk); /* This should be done by timer code */
901 if (cpu_is_omap15xx())
902 clk_enable(&arm_gpio_ck);
904 return 0;