OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / arm / mach-pxa / ezx.c
blob92ba16e1b6fc6e042cf8c2aedb684f58cbdb1a6e
1 /*
2 * ezx.c - Common code for the EZX platform.
4 * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
5 * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
6 * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/pwm_backlight.h>
19 #include <linux/input.h>
21 #include <asm/setup.h>
22 #include <asm/mach-types.h>
23 #include <asm/mach/arch.h>
25 #include <mach/pxa27x.h>
26 #include <mach/pxafb.h>
27 #include <mach/ohci.h>
28 #include <mach/i2c.h>
29 #include <mach/hardware.h>
30 #include <mach/pxa27x_keypad.h>
32 #include "devices.h"
33 #include "generic.h"
35 static struct platform_pwm_backlight_data ezx_backlight_data = {
36 .pwm_id = 0,
37 .max_brightness = 1023,
38 .dft_brightness = 1023,
39 .pwm_period_ns = 78770,
42 static struct platform_device ezx_backlight_device = {
43 .name = "pwm-backlight",
44 .dev = {
45 .parent = &pxa27x_device_pwm0.dev,
46 .platform_data = &ezx_backlight_data,
50 static struct pxafb_mode_info mode_ezx_old = {
51 .pixclock = 150000,
52 .xres = 240,
53 .yres = 320,
54 .bpp = 16,
55 .hsync_len = 10,
56 .left_margin = 20,
57 .right_margin = 10,
58 .vsync_len = 2,
59 .upper_margin = 3,
60 .lower_margin = 2,
61 .sync = 0,
64 static struct pxafb_mach_info ezx_fb_info_1 = {
65 .modes = &mode_ezx_old,
66 .num_modes = 1,
67 .lcd_conn = LCD_COLOR_TFT_16BPP,
70 static struct pxafb_mode_info mode_72r89803y01 = {
71 .pixclock = 192308,
72 .xres = 240,
73 .yres = 320,
74 .bpp = 32,
75 .depth = 18,
76 .hsync_len = 10,
77 .left_margin = 20,
78 .right_margin = 10,
79 .vsync_len = 2,
80 .upper_margin = 3,
81 .lower_margin = 2,
82 .sync = 0,
85 static struct pxafb_mach_info ezx_fb_info_2 = {
86 .modes = &mode_72r89803y01,
87 .num_modes = 1,
88 .lcd_conn = LCD_COLOR_TFT_18BPP,
91 static struct platform_device *devices[] __initdata = {
92 &ezx_backlight_device,
95 static unsigned long ezx_pin_config[] __initdata = {
96 /* PWM backlight */
97 GPIO16_PWM0_OUT,
99 /* BTUART */
100 GPIO42_BTUART_RXD,
101 GPIO43_BTUART_TXD,
102 GPIO44_BTUART_CTS,
103 GPIO45_BTUART_RTS,
105 /* I2C */
106 GPIO117_I2C_SCL,
107 GPIO118_I2C_SDA,
109 /* PCAP SSP */
110 GPIO29_SSP1_SCLK,
111 GPIO25_SSP1_TXD,
112 GPIO26_SSP1_RXD,
113 GPIO24_GPIO, /* pcap chip select */
114 GPIO1_GPIO, /* pcap interrupt */
115 GPIO4_GPIO, /* WDI_AP */
116 GPIO55_GPIO, /* SYS_RESTART */
118 /* MMC */
119 GPIO32_MMC_CLK,
120 GPIO92_MMC_DAT_0,
121 GPIO109_MMC_DAT_1,
122 GPIO110_MMC_DAT_2,
123 GPIO111_MMC_DAT_3,
124 GPIO112_MMC_CMD,
125 GPIO11_GPIO, /* mmc detect */
127 /* usb to external transceiver */
128 GPIO34_USB_P2_2,
129 GPIO35_USB_P2_1,
130 GPIO36_USB_P2_4,
131 GPIO39_USB_P2_6,
132 GPIO40_USB_P2_5,
133 GPIO53_USB_P2_3,
135 /* usb to Neptune GSM chip */
136 GPIO30_USB_P3_2,
137 GPIO31_USB_P3_6,
138 GPIO90_USB_P3_5,
139 GPIO91_USB_P3_1,
140 GPIO56_USB_P3_4,
141 GPIO113_USB_P3_3,
144 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
145 static unsigned long gen1_pin_config[] __initdata = {
146 /* flip / lockswitch */
147 GPIO12_GPIO,
149 /* bluetooth (bcm2035) */
150 GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
151 GPIO48_GPIO, /* RESET */
152 GPIO28_GPIO, /* WAKEUP */
154 /* Neptune handshake */
155 GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
156 GPIO57_GPIO, /* AP_RDY */
157 GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
158 GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
159 GPIO82_GPIO, /* RESET */
160 GPIO99_GPIO, /* TC_MM_EN */
162 /* sound */
163 GPIO52_SSP3_SCLK,
164 GPIO83_SSP3_SFRM,
165 GPIO81_SSP3_TXD,
166 GPIO89_SSP3_RXD,
168 /* ssp2 pins to in */
169 GPIO22_GPIO, /* SSP2_SCLK */
170 GPIO37_GPIO, /* SSP2_SFRM */
171 GPIO38_GPIO, /* SSP2_TXD */
172 GPIO88_GPIO, /* SSP2_RXD */
174 /* camera */
175 GPIO23_CIF_MCLK,
176 GPIO54_CIF_PCLK,
177 GPIO85_CIF_LV,
178 GPIO84_CIF_FV,
179 GPIO27_CIF_DD_0,
180 GPIO114_CIF_DD_1,
181 GPIO51_CIF_DD_2,
182 GPIO115_CIF_DD_3,
183 GPIO95_CIF_DD_4,
184 GPIO94_CIF_DD_5,
185 GPIO17_CIF_DD_6,
186 GPIO108_CIF_DD_7,
187 GPIO50_GPIO, /* CAM_EN */
188 GPIO19_GPIO, /* CAM_RST */
190 /* EMU */
191 GPIO120_GPIO, /* EMU_MUX1 */
192 GPIO119_GPIO, /* EMU_MUX2 */
193 GPIO86_GPIO, /* SNP_INT_CTL */
194 GPIO87_GPIO, /* SNP_INT_IN */
196 #endif
198 #if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
199 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
200 static unsigned long gen2_pin_config[] __initdata = {
201 /* flip / lockswitch */
202 GPIO15_GPIO,
204 /* EOC */
205 GPIO10_GPIO,
207 /* bluetooth (bcm2045) */
208 GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
209 GPIO37_GPIO, /* RESET */
210 GPIO57_GPIO, /* WAKEUP */
212 /* Neptune handshake */
213 GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
214 GPIO96_GPIO, /* AP_RDY */
215 GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
216 GPIO116_GPIO, /* RESET */
217 GPIO41_GPIO, /* BP_FLASH */
219 /* sound */
220 GPIO52_SSP3_SCLK,
221 GPIO83_SSP3_SFRM,
222 GPIO81_SSP3_TXD,
223 GPIO82_SSP3_RXD,
225 /* ssp2 pins to in */
226 GPIO22_GPIO, /* SSP2_SCLK */
227 GPIO14_GPIO, /* SSP2_SFRM */
228 GPIO38_GPIO, /* SSP2_TXD */
229 GPIO88_GPIO, /* SSP2_RXD */
231 /* camera */
232 GPIO23_CIF_MCLK,
233 GPIO54_CIF_PCLK,
234 GPIO85_CIF_LV,
235 GPIO84_CIF_FV,
236 GPIO27_CIF_DD_0,
237 GPIO114_CIF_DD_1,
238 GPIO51_CIF_DD_2,
239 GPIO115_CIF_DD_3,
240 GPIO95_CIF_DD_4,
241 GPIO48_CIF_DD_5,
242 GPIO93_CIF_DD_6,
243 GPIO12_CIF_DD_7,
244 GPIO50_GPIO, /* CAM_EN */
245 GPIO28_GPIO, /* CAM_RST */
246 GPIO17_GPIO, /* CAM_FLASH */
248 #endif
250 #ifdef CONFIG_MACH_EZX_A780
251 static unsigned long a780_pin_config[] __initdata = {
252 /* keypad */
253 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
254 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
255 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
256 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
257 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
258 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
259 GPIO103_KP_MKOUT_0,
260 GPIO104_KP_MKOUT_1,
261 GPIO105_KP_MKOUT_2,
262 GPIO106_KP_MKOUT_3,
263 GPIO107_KP_MKOUT_4,
265 /* attenuate sound */
266 GPIO96_GPIO,
268 #endif
270 #ifdef CONFIG_MACH_EZX_E680
271 static unsigned long e680_pin_config[] __initdata = {
272 /* keypad */
273 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
274 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
275 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
277 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
278 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
279 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
280 GPIO103_KP_MKOUT_0,
281 GPIO104_KP_MKOUT_1,
282 GPIO105_KP_MKOUT_2,
283 GPIO106_KP_MKOUT_3,
285 /* MIDI */
286 GPIO79_GPIO, /* VA_SEL_BUL */
287 GPIO80_GPIO, /* FLT_SEL_BUL */
288 GPIO78_GPIO, /* MIDI_RESET */
289 GPIO33_GPIO, /* MIDI_CS */
290 GPIO15_GPIO, /* MIDI_IRQ */
291 GPIO49_GPIO, /* MIDI_NPWE */
292 GPIO18_GPIO, /* MIDI_RDY */
294 /* leds */
295 GPIO46_GPIO,
296 GPIO47_GPIO,
298 #endif
300 #ifdef CONFIG_MACH_EZX_A1200
301 static unsigned long a1200_pin_config[] __initdata = {
302 /* keypad */
303 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
304 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
305 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
306 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
307 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
308 GPIO103_KP_MKOUT_0,
309 GPIO104_KP_MKOUT_1,
310 GPIO105_KP_MKOUT_2,
311 GPIO106_KP_MKOUT_3,
312 GPIO107_KP_MKOUT_4,
313 GPIO108_KP_MKOUT_5,
315 #endif
317 #ifdef CONFIG_MACH_EZX_A910
318 static unsigned long a910_pin_config[] __initdata = {
319 /* keypad */
320 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
321 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
322 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
323 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
324 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
325 GPIO103_KP_MKOUT_0,
326 GPIO104_KP_MKOUT_1,
327 GPIO105_KP_MKOUT_2,
328 GPIO106_KP_MKOUT_3,
329 GPIO107_KP_MKOUT_4,
330 GPIO108_KP_MKOUT_5,
332 /* WLAN */
333 GPIO89_GPIO, /* RESET */
334 GPIO33_GPIO, /* WAKEUP */
335 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
337 /* MMC CS */
338 GPIO20_GPIO,
340 #endif
342 #ifdef CONFIG_MACH_EZX_E2
343 static unsigned long e2_pin_config[] __initdata = {
344 /* keypad */
345 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
346 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
347 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
348 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
349 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
350 GPIO103_KP_MKOUT_0,
351 GPIO104_KP_MKOUT_1,
352 GPIO105_KP_MKOUT_2,
353 GPIO106_KP_MKOUT_3,
354 GPIO107_KP_MKOUT_4,
355 GPIO108_KP_MKOUT_5,
357 #endif
359 #ifdef CONFIG_MACH_EZX_E6
360 static unsigned long e6_pin_config[] __initdata = {
361 /* keypad */
362 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
363 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
364 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
365 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
366 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
367 GPIO103_KP_MKOUT_0,
368 GPIO104_KP_MKOUT_1,
369 GPIO105_KP_MKOUT_2,
370 GPIO106_KP_MKOUT_3,
371 GPIO107_KP_MKOUT_4,
372 GPIO108_KP_MKOUT_5,
374 #endif
376 /* KEYPAD */
377 #ifdef CONFIG_MACH_EZX_A780
378 static unsigned int a780_key_map[] = {
379 KEY(0, 0, KEY_SEND),
380 KEY(0, 1, KEY_BACK),
381 KEY(0, 2, KEY_END),
382 KEY(0, 3, KEY_PAGEUP),
383 KEY(0, 4, KEY_UP),
385 KEY(1, 0, KEY_NUMERIC_1),
386 KEY(1, 1, KEY_NUMERIC_2),
387 KEY(1, 2, KEY_NUMERIC_3),
388 KEY(1, 3, KEY_SELECT),
389 KEY(1, 4, KEY_KPENTER),
391 KEY(2, 0, KEY_NUMERIC_4),
392 KEY(2, 1, KEY_NUMERIC_5),
393 KEY(2, 2, KEY_NUMERIC_6),
394 KEY(2, 3, KEY_RECORD),
395 KEY(2, 4, KEY_LEFT),
397 KEY(3, 0, KEY_NUMERIC_7),
398 KEY(3, 1, KEY_NUMERIC_8),
399 KEY(3, 2, KEY_NUMERIC_9),
400 KEY(3, 3, KEY_HOME),
401 KEY(3, 4, KEY_RIGHT),
403 KEY(4, 0, KEY_NUMERIC_STAR),
404 KEY(4, 1, KEY_NUMERIC_0),
405 KEY(4, 2, KEY_NUMERIC_POUND),
406 KEY(4, 3, KEY_PAGEDOWN),
407 KEY(4, 4, KEY_DOWN),
410 static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
411 .matrix_key_rows = 5,
412 .matrix_key_cols = 5,
413 .matrix_key_map = a780_key_map,
414 .matrix_key_map_size = ARRAY_SIZE(a780_key_map),
416 .direct_key_map = { KEY_CAMERA },
417 .direct_key_num = 1,
419 .debounce_interval = 30,
421 #endif /* CONFIG_MACH_EZX_A780 */
423 #ifdef CONFIG_MACH_EZX_E680
424 static unsigned int e680_key_map[] = {
425 KEY(0, 0, KEY_UP),
426 KEY(0, 1, KEY_RIGHT),
427 KEY(0, 2, KEY_RESERVED),
428 KEY(0, 3, KEY_SEND),
430 KEY(1, 0, KEY_DOWN),
431 KEY(1, 1, KEY_LEFT),
432 KEY(1, 2, KEY_PAGEUP),
433 KEY(1, 3, KEY_PAGEDOWN),
435 KEY(2, 0, KEY_RESERVED),
436 KEY(2, 1, KEY_RESERVED),
437 KEY(2, 2, KEY_RESERVED),
438 KEY(2, 3, KEY_KPENTER),
441 static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
442 .matrix_key_rows = 3,
443 .matrix_key_cols = 4,
444 .matrix_key_map = e680_key_map,
445 .matrix_key_map_size = ARRAY_SIZE(e680_key_map),
447 .direct_key_map = {
448 KEY_CAMERA,
449 KEY_RESERVED,
450 KEY_RESERVED,
451 KEY_F1,
452 KEY_CANCEL,
453 KEY_F2,
455 .direct_key_num = 6,
457 .debounce_interval = 30,
459 #endif /* CONFIG_MACH_EZX_E680 */
461 #ifdef CONFIG_MACH_EZX_A1200
462 static unsigned int a1200_key_map[] = {
463 KEY(0, 0, KEY_RESERVED),
464 KEY(0, 1, KEY_RIGHT),
465 KEY(0, 2, KEY_PAGEDOWN),
466 KEY(0, 3, KEY_RESERVED),
467 KEY(0, 4, KEY_RESERVED),
468 KEY(0, 5, KEY_RESERVED),
470 KEY(1, 0, KEY_RESERVED),
471 KEY(1, 1, KEY_DOWN),
472 KEY(1, 2, KEY_CAMERA),
473 KEY(1, 3, KEY_RESERVED),
474 KEY(1, 4, KEY_RESERVED),
475 KEY(1, 5, KEY_RESERVED),
477 KEY(2, 0, KEY_RESERVED),
478 KEY(2, 1, KEY_KPENTER),
479 KEY(2, 2, KEY_RECORD),
480 KEY(2, 3, KEY_RESERVED),
481 KEY(2, 4, KEY_RESERVED),
482 KEY(2, 5, KEY_SELECT),
484 KEY(3, 0, KEY_RESERVED),
485 KEY(3, 1, KEY_UP),
486 KEY(3, 2, KEY_SEND),
487 KEY(3, 3, KEY_RESERVED),
488 KEY(3, 4, KEY_RESERVED),
489 KEY(3, 5, KEY_RESERVED),
491 KEY(4, 0, KEY_RESERVED),
492 KEY(4, 1, KEY_LEFT),
493 KEY(4, 2, KEY_PAGEUP),
494 KEY(4, 3, KEY_RESERVED),
495 KEY(4, 4, KEY_RESERVED),
496 KEY(4, 5, KEY_RESERVED),
499 static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
500 .matrix_key_rows = 5,
501 .matrix_key_cols = 6,
502 .matrix_key_map = a1200_key_map,
503 .matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
505 .debounce_interval = 30,
507 #endif /* CONFIG_MACH_EZX_A1200 */
509 #ifdef CONFIG_MACH_EZX_E6
510 static unsigned int e6_key_map[] = {
511 KEY(0, 0, KEY_RESERVED),
512 KEY(0, 1, KEY_RIGHT),
513 KEY(0, 2, KEY_PAGEDOWN),
514 KEY(0, 3, KEY_RESERVED),
515 KEY(0, 4, KEY_RESERVED),
516 KEY(0, 5, KEY_NEXTSONG),
518 KEY(1, 0, KEY_RESERVED),
519 KEY(1, 1, KEY_DOWN),
520 KEY(1, 2, KEY_PROG1),
521 KEY(1, 3, KEY_RESERVED),
522 KEY(1, 4, KEY_RESERVED),
523 KEY(1, 5, KEY_RESERVED),
525 KEY(2, 0, KEY_RESERVED),
526 KEY(2, 1, KEY_ENTER),
527 KEY(2, 2, KEY_CAMERA),
528 KEY(2, 3, KEY_RESERVED),
529 KEY(2, 4, KEY_RESERVED),
530 KEY(2, 5, KEY_WWW),
532 KEY(3, 0, KEY_RESERVED),
533 KEY(3, 1, KEY_UP),
534 KEY(3, 2, KEY_SEND),
535 KEY(3, 3, KEY_RESERVED),
536 KEY(3, 4, KEY_RESERVED),
537 KEY(3, 5, KEY_PLAYPAUSE),
539 KEY(4, 0, KEY_RESERVED),
540 KEY(4, 1, KEY_LEFT),
541 KEY(4, 2, KEY_PAGEUP),
542 KEY(4, 3, KEY_RESERVED),
543 KEY(4, 4, KEY_RESERVED),
544 KEY(4, 5, KEY_PREVIOUSSONG),
547 static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
548 .matrix_key_rows = 5,
549 .matrix_key_cols = 6,
550 .matrix_key_map = e6_key_map,
551 .matrix_key_map_size = ARRAY_SIZE(e6_key_map),
553 .debounce_interval = 30,
555 #endif /* CONFIG_MACH_EZX_E6 */
557 #ifdef CONFIG_MACH_EZX_A910
558 static unsigned int a910_key_map[] = {
559 KEY(0, 0, KEY_NUMERIC_6),
560 KEY(0, 1, KEY_RIGHT),
561 KEY(0, 2, KEY_PAGEDOWN),
562 KEY(0, 3, KEY_KPENTER),
563 KEY(0, 4, KEY_NUMERIC_5),
564 KEY(0, 5, KEY_CAMERA),
566 KEY(1, 0, KEY_NUMERIC_8),
567 KEY(1, 1, KEY_DOWN),
568 KEY(1, 2, KEY_RESERVED),
569 KEY(1, 3, KEY_F1), /* Left SoftKey */
570 KEY(1, 4, KEY_NUMERIC_STAR),
571 KEY(1, 5, KEY_RESERVED),
573 KEY(2, 0, KEY_NUMERIC_7),
574 KEY(2, 1, KEY_NUMERIC_9),
575 KEY(2, 2, KEY_RECORD),
576 KEY(2, 3, KEY_F2), /* Right SoftKey */
577 KEY(2, 4, KEY_BACK),
578 KEY(2, 5, KEY_SELECT),
580 KEY(3, 0, KEY_NUMERIC_2),
581 KEY(3, 1, KEY_UP),
582 KEY(3, 2, KEY_SEND),
583 KEY(3, 3, KEY_NUMERIC_0),
584 KEY(3, 4, KEY_NUMERIC_1),
585 KEY(3, 5, KEY_RECORD),
587 KEY(4, 0, KEY_NUMERIC_4),
588 KEY(4, 1, KEY_LEFT),
589 KEY(4, 2, KEY_PAGEUP),
590 KEY(4, 3, KEY_NUMERIC_POUND),
591 KEY(4, 4, KEY_NUMERIC_3),
592 KEY(4, 5, KEY_RESERVED),
595 static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
596 .matrix_key_rows = 5,
597 .matrix_key_cols = 6,
598 .matrix_key_map = a910_key_map,
599 .matrix_key_map_size = ARRAY_SIZE(a910_key_map),
601 .debounce_interval = 30,
603 #endif /* CONFIG_MACH_EZX_A910 */
605 #ifdef CONFIG_MACH_EZX_E2
606 static unsigned int e2_key_map[] = {
607 KEY(0, 0, KEY_NUMERIC_6),
608 KEY(0, 1, KEY_RIGHT),
609 KEY(0, 2, KEY_NUMERIC_9),
610 KEY(0, 3, KEY_NEXTSONG),
611 KEY(0, 4, KEY_NUMERIC_5),
612 KEY(0, 5, KEY_F1), /* Left SoftKey */
614 KEY(1, 0, KEY_NUMERIC_8),
615 KEY(1, 1, KEY_DOWN),
616 KEY(1, 2, KEY_RESERVED),
617 KEY(1, 3, KEY_PAGEUP),
618 KEY(1, 4, KEY_NUMERIC_STAR),
619 KEY(1, 5, KEY_F2), /* Right SoftKey */
621 KEY(2, 0, KEY_NUMERIC_7),
622 KEY(2, 1, KEY_KPENTER),
623 KEY(2, 2, KEY_RECORD),
624 KEY(2, 3, KEY_PAGEDOWN),
625 KEY(2, 4, KEY_BACK),
626 KEY(2, 5, KEY_NUMERIC_0),
628 KEY(3, 0, KEY_NUMERIC_2),
629 KEY(3, 1, KEY_UP),
630 KEY(3, 2, KEY_SEND),
631 KEY(3, 3, KEY_PLAYPAUSE),
632 KEY(3, 4, KEY_NUMERIC_1),
633 KEY(3, 5, KEY_SOUND), /* Music SoftKey */
635 KEY(4, 0, KEY_NUMERIC_4),
636 KEY(4, 1, KEY_LEFT),
637 KEY(4, 2, KEY_NUMERIC_POUND),
638 KEY(4, 3, KEY_PREVIOUSSONG),
639 KEY(4, 4, KEY_NUMERIC_3),
640 KEY(4, 5, KEY_RESERVED),
643 static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
644 .matrix_key_rows = 5,
645 .matrix_key_cols = 6,
646 .matrix_key_map = e2_key_map,
647 .matrix_key_map_size = ARRAY_SIZE(e2_key_map),
649 .debounce_interval = 30,
651 #endif /* CONFIG_MACH_EZX_E2 */
653 #ifdef CONFIG_MACH_EZX_A780
654 static void __init a780_init(void)
656 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
657 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
658 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
660 pxa_set_i2c_info(NULL);
662 set_pxa_fb_info(&ezx_fb_info_1);
664 pxa_set_keypad_info(&a780_keypad_platform_data);
666 platform_add_devices(devices, ARRAY_SIZE(devices));
669 MACHINE_START(EZX_A780, "Motorola EZX A780")
670 .phys_io = 0x40000000,
671 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
672 .boot_params = 0xa0000100,
673 .map_io = pxa_map_io,
674 .init_irq = pxa27x_init_irq,
675 .timer = &pxa_timer,
676 .init_machine = a780_init,
677 MACHINE_END
678 #endif
680 #ifdef CONFIG_MACH_EZX_E680
681 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
682 { I2C_BOARD_INFO("tea5767", 0x81) },
685 static void __init e680_init(void)
687 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
688 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
689 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
691 pxa_set_i2c_info(NULL);
692 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
694 set_pxa_fb_info(&ezx_fb_info_1);
696 pxa_set_keypad_info(&e680_keypad_platform_data);
698 platform_add_devices(devices, ARRAY_SIZE(devices));
701 MACHINE_START(EZX_E680, "Motorola EZX E680")
702 .phys_io = 0x40000000,
703 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
704 .boot_params = 0xa0000100,
705 .map_io = pxa_map_io,
706 .init_irq = pxa27x_init_irq,
707 .timer = &pxa_timer,
708 .init_machine = e680_init,
709 MACHINE_END
710 #endif
712 #ifdef CONFIG_MACH_EZX_A1200
713 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
714 { I2C_BOARD_INFO("tea5767", 0x81) },
717 static void __init a1200_init(void)
719 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
720 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
721 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
723 pxa_set_i2c_info(NULL);
724 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
726 set_pxa_fb_info(&ezx_fb_info_2);
728 pxa_set_keypad_info(&a1200_keypad_platform_data);
730 platform_add_devices(devices, ARRAY_SIZE(devices));
733 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
734 .phys_io = 0x40000000,
735 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
736 .boot_params = 0xa0000100,
737 .map_io = pxa_map_io,
738 .init_irq = pxa27x_init_irq,
739 .timer = &pxa_timer,
740 .init_machine = a1200_init,
741 MACHINE_END
742 #endif
744 #ifdef CONFIG_MACH_EZX_A910
745 static void __init a910_init(void)
747 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
748 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
749 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
751 pxa_set_i2c_info(NULL);
753 set_pxa_fb_info(&ezx_fb_info_2);
755 pxa_set_keypad_info(&a910_keypad_platform_data);
757 platform_add_devices(devices, ARRAY_SIZE(devices));
760 MACHINE_START(EZX_A910, "Motorola EZX A910")
761 .phys_io = 0x40000000,
762 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
763 .boot_params = 0xa0000100,
764 .map_io = pxa_map_io,
765 .init_irq = pxa27x_init_irq,
766 .timer = &pxa_timer,
767 .init_machine = a910_init,
768 MACHINE_END
769 #endif
771 #ifdef CONFIG_MACH_EZX_E6
772 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
773 { I2C_BOARD_INFO("tea5767", 0x81) },
776 static void __init e6_init(void)
778 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
779 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
780 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
782 pxa_set_i2c_info(NULL);
783 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
785 set_pxa_fb_info(&ezx_fb_info_2);
787 pxa_set_keypad_info(&e6_keypad_platform_data);
789 platform_add_devices(devices, ARRAY_SIZE(devices));
792 MACHINE_START(EZX_E6, "Motorola EZX E6")
793 .phys_io = 0x40000000,
794 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
795 .boot_params = 0xa0000100,
796 .map_io = pxa_map_io,
797 .init_irq = pxa27x_init_irq,
798 .timer = &pxa_timer,
799 .init_machine = e6_init,
800 MACHINE_END
801 #endif
803 #ifdef CONFIG_MACH_EZX_E2
804 static struct i2c_board_info __initdata e2_i2c_board_info[] = {
805 { I2C_BOARD_INFO("tea5767", 0x81) },
808 static void __init e2_init(void)
810 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
811 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
812 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
814 pxa_set_i2c_info(NULL);
815 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
817 set_pxa_fb_info(&ezx_fb_info_2);
819 pxa_set_keypad_info(&e2_keypad_platform_data);
821 platform_add_devices(devices, ARRAY_SIZE(devices));
824 MACHINE_START(EZX_E2, "Motorola EZX E2")
825 .phys_io = 0x40000000,
826 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
827 .boot_params = 0xa0000100,
828 .map_io = pxa_map_io,
829 .init_irq = pxa27x_init_irq,
830 .timer = &pxa_timer,
831 .init_machine = e2_init,
832 MACHINE_END
833 #endif