OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / boot / dts / mpc834x_mds.dts
blobd9f0a2325fa4fddbc93f8019a94446f76d4d0cdc
1 /*
2  * MPC8349E MDS Device Tree Source
3  *
4  * Copyright 2005, 2006 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "MPC8349EMDS";
16         compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 ethernet0 = &enet0;
22                 ethernet1 = &enet1;
23                 serial0 = &serial0;
24                 serial1 = &serial1;
25                 pci0 = &pci0;
26                 pci1 = &pci1;
27         };
29         cpus {
30                 #address-cells = <1>;
31                 #size-cells = <0>;
33                 PowerPC,8349@0 {
34                         device_type = "cpu";
35                         reg = <0x0>;
36                         d-cache-line-size = <32>;
37                         i-cache-line-size = <32>;
38                         d-cache-size = <32768>;
39                         i-cache-size = <32768>;
40                         timebase-frequency = <0>;       // from bootloader
41                         bus-frequency = <0>;            // from bootloader
42                         clock-frequency = <0>;          // from bootloader
43                 };
44         };
46         memory {
47                 device_type = "memory";
48                 reg = <0x00000000 0x10000000>;  // 256MB at 0
49         };
51         bcsr@e2400000 {
52                 compatible = "fsl,mpc8349mds-bcsr";
53                 reg = <0xe2400000 0x8000>;
54         };
56         soc8349@e0000000 {
57                 #address-cells = <1>;
58                 #size-cells = <1>;
59                 device_type = "soc";
60                 compatible = "simple-bus";
61                 ranges = <0x0 0xe0000000 0x00100000>;
62                 reg = <0xe0000000 0x00000200>;
63                 bus-frequency = <0>;
65                 wdt@200 {
66                         device_type = "watchdog";
67                         compatible = "mpc83xx_wdt";
68                         reg = <0x200 0x100>;
69                 };
71                 i2c@3000 {
72                         #address-cells = <1>;
73                         #size-cells = <0>;
74                         cell-index = <0>;
75                         compatible = "fsl-i2c";
76                         reg = <0x3000 0x100>;
77                         interrupts = <14 0x8>;
78                         interrupt-parent = <&ipic>;
79                         dfsrr;
81                         rtc@68 {
82                                 compatible = "dallas,ds1374";
83                                 reg = <0x68>;
84                         };
85                 };
87                 i2c@3100 {
88                         #address-cells = <1>;
89                         #size-cells = <0>;
90                         cell-index = <1>;
91                         compatible = "fsl-i2c";
92                         reg = <0x3100 0x100>;
93                         interrupts = <15 0x8>;
94                         interrupt-parent = <&ipic>;
95                         dfsrr;
96                 };
98                 spi@7000 {
99                         cell-index = <0>;
100                         compatible = "fsl,spi";
101                         reg = <0x7000 0x1000>;
102                         interrupts = <16 0x8>;
103                         interrupt-parent = <&ipic>;
104                         mode = "cpu";
105                 };
107                 dma@82a8 {
108                         #address-cells = <1>;
109                         #size-cells = <1>;
110                         compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
111                         reg = <0x82a8 4>;
112                         ranges = <0 0x8100 0x1a8>;
113                         interrupt-parent = <&ipic>;
114                         interrupts = <71 8>;
115                         cell-index = <0>;
116                         dma-channel@0 {
117                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
118                                 reg = <0 0x80>;
119                                 cell-index = <0>;
120                                 interrupt-parent = <&ipic>;
121                                 interrupts = <71 8>;
122                         };
123                         dma-channel@80 {
124                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
125                                 reg = <0x80 0x80>;
126                                 cell-index = <1>;
127                                 interrupt-parent = <&ipic>;
128                                 interrupts = <71 8>;
129                         };
130                         dma-channel@100 {
131                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
132                                 reg = <0x100 0x80>;
133                                 cell-index = <2>;
134                                 interrupt-parent = <&ipic>;
135                                 interrupts = <71 8>;
136                         };
137                         dma-channel@180 {
138                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
139                                 reg = <0x180 0x28>;
140                                 cell-index = <3>;
141                                 interrupt-parent = <&ipic>;
142                                 interrupts = <71 8>;
143                         };
144                 };
146                 /* phy type (ULPI or SERIAL) are only types supported for MPH */
147                 /* port = 0 or 1 */
148                 usb@22000 {
149                         compatible = "fsl-usb2-mph";
150                         reg = <0x22000 0x1000>;
151                         #address-cells = <1>;
152                         #size-cells = <0>;
153                         interrupt-parent = <&ipic>;
154                         interrupts = <39 0x8>;
155                         phy_type = "ulpi";
156                         port1;
157                 };
158                 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
159                 usb@23000 {
160                         compatible = "fsl-usb2-dr";
161                         reg = <0x23000 0x1000>;
162                         #address-cells = <1>;
163                         #size-cells = <0>;
164                         interrupt-parent = <&ipic>;
165                         interrupts = <38 0x8>;
166                         dr_mode = "otg";
167                         phy_type = "ulpi";
168                 };
170                 enet0: ethernet@24000 {
171                         #address-cells = <1>;
172                         #size-cells = <1>;
173                         cell-index = <0>;
174                         device_type = "network";
175                         model = "TSEC";
176                         compatible = "gianfar";
177                         reg = <0x24000 0x1000>;
178                         ranges = <0x0 0x24000 0x1000>;
179                         local-mac-address = [ 00 00 00 00 00 00 ];
180                         interrupts = <32 0x8 33 0x8 34 0x8>;
181                         interrupt-parent = <&ipic>;
182                         tbi-handle = <&tbi0>;
183                         phy-handle = <&phy0>;
184                         linux,network-index = <0>;
186                         mdio@520 {
187                                 #address-cells = <1>;
188                                 #size-cells = <0>;
189                                 compatible = "fsl,gianfar-mdio";
190                                 reg = <0x520 0x20>;
192                                 phy0: ethernet-phy@0 {
193                                         interrupt-parent = <&ipic>;
194                                         interrupts = <17 0x8>;
195                                         reg = <0x0>;
196                                         device_type = "ethernet-phy";
197                                 };
199                                 phy1: ethernet-phy@1 {
200                                         interrupt-parent = <&ipic>;
201                                         interrupts = <18 0x8>;
202                                         reg = <0x1>;
203                                         device_type = "ethernet-phy";
204                                 };
206                                 tbi0: tbi-phy@11 {
207                                         reg = <0x11>;
208                                         device_type = "tbi-phy";
209                                 };
210                         };
211                 };
213                 enet1: ethernet@25000 {
214                         #address-cells = <1>;
215                         #size-cells = <1>;
216                         cell-index = <1>;
217                         device_type = "network";
218                         model = "TSEC";
219                         compatible = "gianfar";
220                         reg = <0x25000 0x1000>;
221                         ranges = <0x0 0x25000 0x1000>;
222                         local-mac-address = [ 00 00 00 00 00 00 ];
223                         interrupts = <35 0x8 36 0x8 37 0x8>;
224                         interrupt-parent = <&ipic>;
225                         tbi-handle = <&tbi1>;
226                         phy-handle = <&phy1>;
227                         linux,network-index = <1>;
229                         mdio@520 {
230                                 #address-cells = <1>;
231                                 #size-cells = <0>;
232                                 compatible = "fsl,gianfar-tbi";
233                                 reg = <0x520 0x20>;
235                                 tbi1: tbi-phy@11 {
236                                         reg = <0x11>;
237                                         device_type = "tbi-phy";
238                                 };
239                         };
240                 };
242                 serial0: serial@4500 {
243                         cell-index = <0>;
244                         device_type = "serial";
245                         compatible = "ns16550";
246                         reg = <0x4500 0x100>;
247                         clock-frequency = <0>;
248                         interrupts = <9 0x8>;
249                         interrupt-parent = <&ipic>;
250                 };
252                 serial1: serial@4600 {
253                         cell-index = <1>;
254                         device_type = "serial";
255                         compatible = "ns16550";
256                         reg = <0x4600 0x100>;
257                         clock-frequency = <0>;
258                         interrupts = <10 0x8>;
259                         interrupt-parent = <&ipic>;
260                 };
262                 crypto@30000 {
263                         compatible = "fsl,sec2.0";
264                         reg = <0x30000 0x10000>;
265                         interrupts = <11 0x8>;
266                         interrupt-parent = <&ipic>;
267                         fsl,num-channels = <4>;
268                         fsl,channel-fifo-len = <24>;
269                         fsl,exec-units-mask = <0x7e>;
270                         fsl,descriptor-types-mask = <0x01010ebf>;
271                 };
273                 /* IPIC
274                  * interrupts cell = <intr #, sense>
275                  * sense values match linux IORESOURCE_IRQ_* defines:
276                  * sense == 8: Level, low assertion
277                  * sense == 2: Edge, high-to-low change
278                  */
279                 ipic: pic@700 {
280                         interrupt-controller;
281                         #address-cells = <0>;
282                         #interrupt-cells = <2>;
283                         reg = <0x700 0x100>;
284                         device_type = "ipic";
285                 };
286         };
288         pci0: pci@e0008500 {
289                 cell-index = <1>;
290                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
291                 interrupt-map = <
293                                 /* IDSEL 0x11 */
294                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
295                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
296                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
297                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
299                                 /* IDSEL 0x12 */
300                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
301                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
302                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
303                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
305                                 /* IDSEL 0x13 */
306                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
307                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
308                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
309                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
311                                 /* IDSEL 0x15 */
312                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
313                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
314                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
315                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
317                                 /* IDSEL 0x16 */
318                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
319                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
320                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
321                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
323                                 /* IDSEL 0x17 */
324                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
325                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
326                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
327                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
329                                 /* IDSEL 0x18 */
330                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
331                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
332                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
333                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
334                 interrupt-parent = <&ipic>;
335                 interrupts = <66 0x8>;
336                 bus-range = <0 0>;
337                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
338                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
339                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
340                 clock-frequency = <66666666>;
341                 #interrupt-cells = <1>;
342                 #size-cells = <2>;
343                 #address-cells = <3>;
344                 reg = <0xe0008500 0x100         /* internal registers */
345                        0xe0008300 0x8>;         /* config space access registers */
346                 compatible = "fsl,mpc8349-pci";
347                 device_type = "pci";
348         };
350         pci1: pci@e0008600 {
351                 cell-index = <2>;
352                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
353                 interrupt-map = <
355                                 /* IDSEL 0x11 */
356                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
357                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
358                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
359                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
361                                 /* IDSEL 0x12 */
362                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
363                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
364                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
365                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
367                                 /* IDSEL 0x13 */
368                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
369                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
370                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
371                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
373                                 /* IDSEL 0x15 */
374                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
375                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
376                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
377                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
379                                 /* IDSEL 0x16 */
380                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
381                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
382                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
383                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
385                                 /* IDSEL 0x17 */
386                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
387                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
388                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
389                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
391                                 /* IDSEL 0x18 */
392                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
393                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
394                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
395                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
396                 interrupt-parent = <&ipic>;
397                 interrupts = <67 0x8>;
398                 bus-range = <0 0>;
399                 ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
400                           0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
401                           0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
402                 clock-frequency = <66666666>;
403                 #interrupt-cells = <1>;
404                 #size-cells = <2>;
405                 #address-cells = <3>;
406                 reg = <0xe0008600 0x100         /* internal registers */
407                        0xe0008380 0x8>;         /* config space access registers */
408                 compatible = "fsl,mpc8349-pci";
409                 device_type = "pci";
410         };