OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / boot / dts / mpc8379_rdb.dts
blob98ae95bd18f4988088f7fab563b2b482d8c9cbf2
1 /*
2  * MPC8379E RDB Device Tree Source
3  *
4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         compatible = "fsl,mpc8379rdb";
16         #address-cells = <1>;
17         #size-cells = <1>;
19         aliases {
20                 ethernet0 = &enet0;
21                 ethernet1 = &enet1;
22                 serial0 = &serial0;
23                 serial1 = &serial1;
24                 pci0 = &pci0;
25         };
27         cpus {
28                 #address-cells = <1>;
29                 #size-cells = <0>;
31                 PowerPC,8379@0 {
32                         device_type = "cpu";
33                         reg = <0x0>;
34                         d-cache-line-size = <32>;
35                         i-cache-line-size = <32>;
36                         d-cache-size = <32768>;
37                         i-cache-size = <32768>;
38                         timebase-frequency = <0>;
39                         bus-frequency = <0>;
40                         clock-frequency = <0>;
41                 };
42         };
44         memory {
45                 device_type = "memory";
46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
47         };
49         localbus@e0005000 {
50                 #address-cells = <2>;
51                 #size-cells = <1>;
52                 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
53                 reg = <0xe0005000 0x1000>;
54                 interrupts = <77 0x8>;
55                 interrupt-parent = <&ipic>;
57                 // CS0 and CS1 are swapped when
58                 // booting from nand, but the
59                 // addresses are the same.
60                 ranges = <0x0 0x0 0xfe000000 0x00800000
61                           0x1 0x0 0xe0600000 0x00008000
62                           0x2 0x0 0xf0000000 0x00020000
63                           0x3 0x0 0xfa000000 0x00008000>;
65                 flash@0,0 {
66                         #address-cells = <1>;
67                         #size-cells = <1>;
68                         compatible = "cfi-flash";
69                         reg = <0x0 0x0 0x800000>;
70                         bank-width = <2>;
71                         device-width = <1>;
72                 };
74                 nand@1,0 {
75                         #address-cells = <1>;
76                         #size-cells = <1>;
77                         compatible = "fsl,mpc8379-fcm-nand",
78                                      "fsl,elbc-fcm-nand";
79                         reg = <0x1 0x0 0x8000>;
81                         u-boot@0 {
82                                 reg = <0x0 0x100000>;
83                                 read-only;
84                         };
86                         kernel@100000 {
87                                 reg = <0x100000 0x300000>;
88                         };
89                         fs@400000 {
90                                 reg = <0x400000 0x1c00000>;
91                         };
92                 };
93         };
95         immr@e0000000 {
96                 #address-cells = <1>;
97                 #size-cells = <1>;
98                 device_type = "soc";
99                 compatible = "simple-bus";
100                 ranges = <0x0 0xe0000000 0x00100000>;
101                 reg = <0xe0000000 0x00000200>;
102                 bus-frequency = <0>;
104                 wdt@200 {
105                         device_type = "watchdog";
106                         compatible = "mpc83xx_wdt";
107                         reg = <0x200 0x100>;
108                 };
110                 gpio1: gpio-controller@c00 {
111                         #gpio-cells = <2>;
112                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
113                         reg = <0xc00 0x100>;
114                         interrupts = <74 0x8>;
115                         interrupt-parent = <&ipic>;
116                         gpio-controller;
117                 };
119                 gpio2: gpio-controller@d00 {
120                         #gpio-cells = <2>;
121                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
122                         reg = <0xd00 0x100>;
123                         interrupts = <75 0x8>;
124                         interrupt-parent = <&ipic>;
125                         gpio-controller;
126                 };
128                 sleep-nexus {
129                         #address-cells = <1>;
130                         #size-cells = <1>;
131                         compatible = "simple-bus";
132                         sleep = <&pmc 0x0c000000>;
133                         ranges;
135                         i2c@3000 {
136                                 #address-cells = <1>;
137                                 #size-cells = <0>;
138                                 cell-index = <0>;
139                                 compatible = "fsl-i2c";
140                                 reg = <0x3000 0x100>;
141                                 interrupts = <14 0x8>;
142                                 interrupt-parent = <&ipic>;
143                                 dfsrr;
145                                 dtt@48 {
146                                         compatible = "national,lm75";
147                                         reg = <0x48>;
148                                 };
150                                 at24@50 {
151                                         compatible = "at24,24c256";
152                                         reg = <0x50>;
153                                 };
155                                 rtc@68 {
156                                         compatible = "dallas,ds1339";
157                                         reg = <0x68>;
158                                 };
160                                 mcu_pio: mcu@a {
161                                         #gpio-cells = <2>;
162                                         compatible = "fsl,mc9s08qg8-mpc8379erdb",
163                                                      "fsl,mcu-mpc8349emitx";
164                                         reg = <0x0a>;
165                                         gpio-controller;
166                                 };
167                         };
169                         sdhci@2e000 {
170                                 compatible = "fsl,mpc8379-esdhc";
171                                 reg = <0x2e000 0x1000>;
172                                 interrupts = <42 0x8>;
173                                 interrupt-parent = <&ipic>;
174                                 /* Filled in by U-Boot */
175                                 clock-frequency = <0>;
176                         };
177                 };
179                 i2c@3100 {
180                         #address-cells = <1>;
181                         #size-cells = <0>;
182                         cell-index = <1>;
183                         compatible = "fsl-i2c";
184                         reg = <0x3100 0x100>;
185                         interrupts = <15 0x8>;
186                         interrupt-parent = <&ipic>;
187                         dfsrr;
188                 };
190                 spi@7000 {
191                         cell-index = <0>;
192                         compatible = "fsl,spi";
193                         reg = <0x7000 0x1000>;
194                         interrupts = <16 0x8>;
195                         interrupt-parent = <&ipic>;
196                         mode = "cpu";
197                 };
199                 dma@82a8 {
200                         #address-cells = <1>;
201                         #size-cells = <1>;
202                         compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
203                         reg = <0x82a8 4>;
204                         ranges = <0 0x8100 0x1a8>;
205                         interrupt-parent = <&ipic>;
206                         interrupts = <71 8>;
207                         cell-index = <0>;
208                         dma-channel@0 {
209                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
210                                 reg = <0 0x80>;
211                                 cell-index = <0>;
212                                 interrupt-parent = <&ipic>;
213                                 interrupts = <71 8>;
214                         };
215                         dma-channel@80 {
216                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
217                                 reg = <0x80 0x80>;
218                                 cell-index = <1>;
219                                 interrupt-parent = <&ipic>;
220                                 interrupts = <71 8>;
221                         };
222                         dma-channel@100 {
223                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
224                                 reg = <0x100 0x80>;
225                                 cell-index = <2>;
226                                 interrupt-parent = <&ipic>;
227                                 interrupts = <71 8>;
228                         };
229                         dma-channel@180 {
230                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
231                                 reg = <0x180 0x28>;
232                                 cell-index = <3>;
233                                 interrupt-parent = <&ipic>;
234                                 interrupts = <71 8>;
235                         };
236                 };
238                 usb@23000 {
239                         compatible = "fsl-usb2-dr";
240                         reg = <0x23000 0x1000>;
241                         #address-cells = <1>;
242                         #size-cells = <0>;
243                         interrupt-parent = <&ipic>;
244                         interrupts = <38 0x8>;
245                         phy_type = "ulpi";
246                         sleep = <&pmc 0x00c00000>;
247                 };
249                 enet0: ethernet@24000 {
250                         #address-cells = <1>;
251                         #size-cells = <1>;
252                         cell-index = <0>;
253                         device_type = "network";
254                         model = "eTSEC";
255                         compatible = "gianfar";
256                         reg = <0x24000 0x1000>;
257                         ranges = <0x0 0x24000 0x1000>;
258                         local-mac-address = [ 00 00 00 00 00 00 ];
259                         interrupts = <32 0x8 33 0x8 34 0x8>;
260                         phy-connection-type = "mii";
261                         interrupt-parent = <&ipic>;
262                         tbi-handle = <&tbi0>;
263                         phy-handle = <&phy2>;
264                         sleep = <&pmc 0xc0000000>;
265                         fsl,magic-packet;
267                         mdio@520 {
268                                 #address-cells = <1>;
269                                 #size-cells = <0>;
270                                 compatible = "fsl,gianfar-mdio";
271                                 reg = <0x520 0x20>;
273                                 phy2: ethernet-phy@2 {
274                                         interrupt-parent = <&ipic>;
275                                         interrupts = <17 0x8>;
276                                         reg = <0x2>;
277                                         device_type = "ethernet-phy";
278                                 };
280                                 tbi0: tbi-phy@11 {
281                                         reg = <0x11>;
282                                         device_type = "tbi-phy";
283                                 };
284                         };
285                 };
287                 enet1: ethernet@25000 {
288                         #address-cells = <1>;
289                         #size-cells = <1>;
290                         cell-index = <1>;
291                         device_type = "network";
292                         model = "eTSEC";
293                         compatible = "gianfar";
294                         reg = <0x25000 0x1000>;
295                         ranges = <0x0 0x25000 0x1000>;
296                         local-mac-address = [ 00 00 00 00 00 00 ];
297                         interrupts = <35 0x8 36 0x8 37 0x8>;
298                         phy-connection-type = "mii";
299                         interrupt-parent = <&ipic>;
300                         fixed-link = <1 1 1000 0 0>;
301                         tbi-handle = <&tbi1>;
302                         sleep = <&pmc 0x30000000>;
303                         fsl,magic-packet;
305                         mdio@520 {
306                                 #address-cells = <1>;
307                                 #size-cells = <0>;
308                                 compatible = "fsl,gianfar-tbi";
309                                 reg = <0x520 0x20>;
311                                 tbi1: tbi-phy@11 {
312                                         reg = <0x11>;
313                                         device_type = "tbi-phy";
314                                 };
315                         };
316                 };
318                 serial0: serial@4500 {
319                         cell-index = <0>;
320                         device_type = "serial";
321                         compatible = "ns16550";
322                         reg = <0x4500 0x100>;
323                         clock-frequency = <0>;
324                         interrupts = <9 0x8>;
325                         interrupt-parent = <&ipic>;
326                 };
328                 serial1: serial@4600 {
329                         cell-index = <1>;
330                         device_type = "serial";
331                         compatible = "ns16550";
332                         reg = <0x4600 0x100>;
333                         clock-frequency = <0>;
334                         interrupts = <10 0x8>;
335                         interrupt-parent = <&ipic>;
336                 };
338                 crypto@30000 {
339                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
340                                      "fsl,sec2.1", "fsl,sec2.0";
341                         reg = <0x30000 0x10000>;
342                         interrupts = <11 0x8>;
343                         interrupt-parent = <&ipic>;
344                         fsl,num-channels = <4>;
345                         fsl,channel-fifo-len = <24>;
346                         fsl,exec-units-mask = <0x9fe>;
347                         fsl,descriptor-types-mask = <0x3ab0ebf>;
348                         sleep = <&pmc 0x03000000>;
349                 };
351                 sata@18000 {
352                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
353                         reg = <0x18000 0x1000>;
354                         interrupts = <44 0x8>;
355                         interrupt-parent = <&ipic>;
356                         sleep = <&pmc 0x000000c0>;
357                 };
359                 sata@19000 {
360                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
361                         reg = <0x19000 0x1000>;
362                         interrupts = <45 0x8>;
363                         interrupt-parent = <&ipic>;
364                         sleep = <&pmc 0x00000030>;
365                 };
367                 sata@1a000 {
368                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
369                         reg = <0x1a000 0x1000>;
370                         interrupts = <46 0x8>;
371                         interrupt-parent = <&ipic>;
372                         sleep = <&pmc 0x0000000c>;
373                 };
375                 sata@1b000 {
376                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
377                         reg = <0x1b000 0x1000>;
378                         interrupts = <47 0x8>;
379                         interrupt-parent = <&ipic>;
380                         sleep = <&pmc 0x00000003>;
381                 };
383                 /* IPIC
384                  * interrupts cell = <intr #, sense>
385                  * sense values match linux IORESOURCE_IRQ_* defines:
386                  * sense == 8: Level, low assertion
387                  * sense == 2: Edge, high-to-low change
388                  */
389                 ipic: interrupt-controller@700 {
390                         compatible = "fsl,ipic";
391                         interrupt-controller;
392                         #address-cells = <0>;
393                         #interrupt-cells = <2>;
394                         reg = <0x700 0x100>;
395                 };
397                 pmc: power@b00 {
398                         compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
399                         reg = <0xb00 0x100 0xa00 0x100>;
400                         interrupts = <80 0x8>;
401                         interrupt-parent = <&ipic>;
402                 };
403         };
405         pci0: pci@e0008500 {
406                 interrupt-map-mask = <0xf800 0 0 7>;
407                 interrupt-map = <
408                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
410                                 /* IDSEL AD14 IRQ6 inta */
411                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
413                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
414                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
415                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
416                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
418                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
419                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
420                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
421                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
422                 interrupt-parent = <&ipic>;
423                 interrupts = <66 0x8>;
424                 bus-range = <0x0 0x0>;
425                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
426                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
427                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
428                 sleep = <&pmc 0x00010000>;
429                 clock-frequency = <66666666>;
430                 #interrupt-cells = <1>;
431                 #size-cells = <2>;
432                 #address-cells = <3>;
433                 reg = <0xe0008500 0x100         /* internal registers */
434                        0xe0008300 0x8>;         /* config space access registers */
435                 compatible = "fsl,mpc8349-pci";
436                 device_type = "pci";
437         };