OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / boot / dts / socrates.dts
blob7a6ae75a1e573a14afac948038fa469a662b012f
1 /*
2  * Device Tree Source for the Socrates board (MPC8544).
3  *
4  * Copyright (c) 2008 Emcraft Systems.
5  * Sergei Poselenov, <sposelenov@emcraft.com>
6  *
7  * This program is free software; you can redistribute  it and/or modify it
8  * under  the terms of  the GNU General  Public License as published by the
9  * Free Software Foundation;  either version 2 of the  License, or (at your
10  * option) any later version.
11  */
13 /dts-v1/;
15 / {
16         model = "abb,socrates";
17         compatible = "abb,socrates";
18         #address-cells = <1>;
19         #size-cells = <1>;
21         aliases {
22                 ethernet0 = &enet0;
23                 ethernet1 = &enet1;
24                 serial0 = &serial0;
25                 serial1 = &serial1;
26                 pci0 = &pci0;
27         };
29         cpus {
30                 #address-cells = <1>;
31                 #size-cells = <0>;
33                 PowerPC,8544@0 {
34                         device_type = "cpu";
35                         reg = <0>;
36                         d-cache-line-size = <32>;
37                         i-cache-line-size = <32>;
38                         d-cache-size = <0x8000>;        // L1, 32K
39                         i-cache-size = <0x8000>;        // L1, 32K
40                         timebase-frequency = <0>;
41                         bus-frequency = <0>;
42                         clock-frequency = <0>;
43                         next-level-cache = <&L2>;
44                 };
45         };
47         memory {
48                 device_type = "memory";
49                 reg = <0x00000000 0x00000000>;  // Filled in by U-Boot
50         };
52         soc8544@e0000000 {
53                 #address-cells = <1>;
54                 #size-cells = <1>;
55                 device_type = "soc";
57                 ranges = <0x00000000 0xe0000000 0x00100000>;
58                 reg = <0xe0000000 0x00001000>;  // CCSRBAR 1M
59                 bus-frequency = <0>;            // Filled in by U-Boot
60                 compatible = "fsl,mpc8544-immr", "simple-bus";
62                 memory-controller@2000 {
63                         compatible = "fsl,mpc8544-memory-controller";
64                         reg = <0x2000 0x1000>;
65                         interrupt-parent = <&mpic>;
66                         interrupts = <18 2>;
67                 };
69                 L2: l2-cache-controller@20000 {
70                         compatible = "fsl,mpc8544-l2-cache-controller";
71                         reg = <0x20000 0x1000>;
72                         cache-line-size = <32>;
73                         cache-size = <0x40000>; // L2, 256K
74                         interrupt-parent = <&mpic>;
75                         interrupts = <16 2>;
76                 };
78                 i2c@3000 {
79                         #address-cells = <1>;
80                         #size-cells = <0>;
81                         cell-index = <0>;
82                         compatible = "fsl,mpc8544-i2c", "fsl-i2c";
83                         reg = <0x3000 0x100>;
84                         interrupts = <43 2>;
85                         interrupt-parent = <&mpic>;
86                         fsl,preserve-clocking;
88                         dtt@28 {
89                                 compatible = "winbond,w83782d";
90                                 reg = <0x28>;
91                         };
92                         rtc@32 {
93                                 compatible = "epson,rx8025";
94                                 reg = <0x32>;
95                                 interrupts = <7 1>;
96                                 interrupt-parent = <&mpic>;
97                         };
98                         dtt@4c {
99                                 compatible = "dallas,ds75";
100                                 reg = <0x4c>;
101                         };
102                         ts@4a {
103                                 compatible = "ti,tsc2003";
104                                 reg = <0x4a>;
105                                 interrupt-parent = <&mpic>;
106                                 interrupts = <8 1>;
107                         };
108                 };
110                 i2c@3100 {
111                         #address-cells = <1>;
112                         #size-cells = <0>;
113                         cell-index = <1>;
114                         compatible = "fsl,mpc8544-i2c", "fsl-i2c";
115                         reg = <0x3100 0x100>;
116                         interrupts = <43 2>;
117                         interrupt-parent = <&mpic>;
118                         fsl,preserve-clocking;
119                 };
121                 enet0: ethernet@24000 {
122                         #address-cells = <1>;
123                         #size-cells = <1>;
124                         cell-index = <0>;
125                         device_type = "network";
126                         model = "eTSEC";
127                         compatible = "gianfar";
128                         reg = <0x24000 0x1000>;
129                         ranges = <0x0 0x24000 0x1000>;
130                         local-mac-address = [ 00 00 00 00 00 00 ];
131                         interrupts = <29 2 30 2 34 2>;
132                         interrupt-parent = <&mpic>;
133                         phy-handle = <&phy0>;
134                         tbi-handle = <&tbi0>;
135                         phy-connection-type = "rgmii-id";
137                         mdio@520 {
138                                 #address-cells = <1>;
139                                 #size-cells = <0>;
140                                 compatible = "fsl,gianfar-mdio";
141                                 reg = <0x520 0x20>;
143                                 phy0: ethernet-phy@0 {
144                                         interrupt-parent = <&mpic>;
145                                         interrupts = <0 1>;
146                                         reg = <0>;
147                                 };
148                                 phy1: ethernet-phy@1 {
149                                         interrupt-parent = <&mpic>;
150                                         interrupts = <0 1>;
151                                         reg = <1>;
152                                 };
153                                 tbi0: tbi-phy@11 {
154                                         reg = <0x11>;
155                                 };
156                         };
157                 };
159                 enet1: ethernet@26000 {
160                         #address-cells = <1>;
161                         #size-cells = <1>;
162                         cell-index = <1>;
163                         device_type = "network";
164                         model = "eTSEC";
165                         compatible = "gianfar";
166                         reg = <0x26000 0x1000>;
167                         ranges = <0x0 0x26000 0x1000>;
168                         local-mac-address = [ 00 00 00 00 00 00 ];
169                         interrupts = <31 2 32 2 33 2>;
170                         interrupt-parent = <&mpic>;
171                         phy-handle = <&phy1>;
172                         tbi-handle = <&tbi1>;
173                         phy-connection-type = "rgmii-id";
175                         mdio@520 {
176                                 #address-cells = <1>;
177                                 #size-cells = <0>;
178                                 compatible = "fsl,gianfar-tbi";
179                                 reg = <0x520 0x20>;
181                                 tbi1: tbi-phy@11 {
182                                         reg = <0x11>;
183                                 };
184                         };
185                 };
187                 serial0: serial@4500 {
188                         cell-index = <0>;
189                         device_type = "serial";
190                         compatible = "ns16550";
191                         reg = <0x4500 0x100>;
192                         clock-frequency = <0>;
193                         interrupts = <42 2>;
194                         interrupt-parent = <&mpic>;
195                 };
197                 serial1: serial@4600 {
198                         cell-index = <1>;
199                         device_type = "serial";
200                         compatible = "ns16550";
201                         reg = <0x4600 0x100>;
202                         clock-frequency = <0>;
203                         interrupts = <42 2>;
204                         interrupt-parent = <&mpic>;
205                 };
207                 global-utilities@e0000 {        //global utilities block
208                         compatible = "fsl,mpc8548-guts";
209                         reg = <0xe0000 0x1000>;
210                         fsl,has-rstcr;
211                 };
213                 mpic: pic@40000 {
214                         interrupt-controller;
215                         #address-cells = <0>;
216                         #interrupt-cells = <2>;
217                         reg = <0x40000 0x40000>;
218                         compatible = "chrp,open-pic";
219                         device_type = "open-pic";
220                 };
221         };
224         localbus {
225                 compatible = "fsl,mpc8544-localbus",
226                              "fsl,pq3-localbus",
227                              "simple-bus";
228                 #address-cells = <2>;
229                 #size-cells = <1>;
230                 reg = <0xe0005000 0x40>;
232                 ranges = <0 0 0xfc000000 0x04000000
233                           2 0 0xc8000000 0x04000000
234                           3 0 0xc0000000 0x00100000
235                         >; /* Overwritten by U-Boot */
237                 nor_flash@0,0 {
238                         compatible = "amd,s29gl256n", "cfi-flash";
239                         bank-width = <2>;
240                         reg = <0x0 0x000000 0x4000000>;
241                         #address-cells = <1>;
242                         #size-cells = <1>;
243                         partition@0 {
244                                 label = "kernel";
245                                 reg = <0x0 0x1e0000>;
246                                 read-only;
247                         };
248                         partition@1e0000 {
249                                 label = "dtb";
250                                 reg = <0x1e0000 0x20000>;
251                         };
252                         partition@200000 {
253                                 label = "root";
254                                 reg = <0x200000 0x200000>;
255                         };
256                         partition@400000 {
257                                 label = "user";
258                                 reg = <0x400000 0x3b80000>;
259                         };
260                         partition@3f80000 {
261                                 label = "env";
262                                 reg = <0x3f80000 0x40000>;
263                                 read-only;
264                         };
265                         partition@3fc0000 {
266                                 label = "u-boot";
267                                 reg = <0x3fc0000 0x40000>;
268                                 read-only;
269                         };
270                 };
272                 display@2,0 {
273                         compatible = "fujitsu,lime";
274                         reg = <2 0x0 0x4000000>;
275                         interrupt-parent = <&mpic>;
276                         interrupts = <6 1>;
277                 };
279                 fpga_pic: fpga-pic@3,10 {
280                         compatible = "abb,socrates-fpga-pic";
281                         reg = <3 0x10 0x10>;
282                         interrupt-controller;
283                         /* IRQs 2, 10, 11, active low, level-sensitive */
284                         interrupts = <2 1 10 1 11 1>;
285                         interrupt-parent = <&mpic>;
286                         #interrupt-cells = <3>;
287                 };
289                 spi@3,60 {
290                         compatible = "abb,socrates-spi";
291                         reg = <3 0x60 0x10>;
292                         interrupts = <8 4 0>;   // number, type, routing
293                         interrupt-parent = <&fpga_pic>;
294                 };
296                 nand@3,70 {
297                         compatible = "abb,socrates-nand";
298                         reg = <3 0x70 0x04>;
299                         bank-width = <1>;
300                         #address-cells = <1>;
301                         #size-cells = <1>;
302                         data@0 {
303                                 label = "data";
304                                 reg = <0x0 0x40000000>;
305                         };
306                 };
308                 can@3,100 {
309                         compatible = "philips,sja1000";
310                         reg = <3 0x100 0x80>;
311                         interrupts = <2 8 1>;   // number, type, routing
312                         interrupt-parent = <&fpga_pic>;
313                 };
314         };
316         pci0: pci@e0008000 {
317                 cell-index = <0>;
318                 #interrupt-cells = <1>;
319                 #size-cells = <2>;
320                 #address-cells = <3>;
321                 compatible = "fsl,mpc8540-pci";
322                 device_type = "pci";
323                 reg = <0xe0008000 0x1000>;
324                 clock-frequency = <66666666>;
326                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
327                 interrupt-map = <
328                                 /* IDSEL 0x11 */
329                                  0x8800 0x0 0x0 1 &mpic 5 1
330                                 /* IDSEL 0x12 */
331                                  0x9000 0x0 0x0 1 &mpic 4 1>;
332                 interrupt-parent = <&mpic>;
333                 interrupts = <24 2>;
334                 bus-range = <0x0 0x0>;
335                 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
336                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
337         };