OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / include / asm / floppy.h
blob24bd34c57e9d020bac9f24dc3be933db06e6e019
1 /*
2 * Architecture specific parts of the Floppy driver
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 1995
9 */
10 #ifndef __ASM_POWERPC_FLOPPY_H
11 #define __ASM_POWERPC_FLOPPY_H
12 #ifdef __KERNEL__
14 #include <asm/machdep.h>
16 #define fd_inb(port) inb_p(port)
17 #define fd_outb(value,port) outb_p(value,port)
19 #define fd_enable_dma() enable_dma(FLOPPY_DMA)
20 #define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
21 #define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
22 #define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA)
23 #define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode)
24 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
25 #define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
26 #define fd_enable_irq() enable_irq(FLOPPY_IRQ)
27 #define fd_disable_irq() disable_irq(FLOPPY_IRQ)
28 #define fd_cacheflush(addr,size) /* nothing */
29 #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
31 #include <linux/pci.h>
32 #include <asm/ppc-pci.h> /* for isa_bridge_pcidev */
34 #define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
36 static int fd_request_dma(void);
38 struct fd_dma_ops {
39 void (*_disable_dma)(unsigned int dmanr);
40 void (*_free_dma)(unsigned int dmanr);
41 int (*_get_dma_residue)(unsigned int dummy);
42 int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
45 static int virtual_dma_count;
46 static int virtual_dma_residue;
47 static char *virtual_dma_addr;
48 static int virtual_dma_mode;
49 static int doing_vdma;
50 static struct fd_dma_ops *fd_ops;
52 static irqreturn_t floppy_hardint(int irq, void *dev_id)
54 unsigned char st;
55 int lcount;
56 char *lptr;
58 if (!doing_vdma)
59 return floppy_interrupt(irq, dev_id);
62 st = 1;
63 for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
64 lcount; lcount--, lptr++) {
65 st=inb(virtual_dma_port+4) & 0xa0 ;
66 if (st != 0xa0)
67 break;
68 if (virtual_dma_mode)
69 outb_p(*lptr, virtual_dma_port+5);
70 else
71 *lptr = inb_p(virtual_dma_port+5);
73 virtual_dma_count = lcount;
74 virtual_dma_addr = lptr;
75 st = inb(virtual_dma_port+4);
77 if (st == 0x20)
78 return IRQ_HANDLED;
79 if (!(st & 0x20)) {
80 virtual_dma_residue += virtual_dma_count;
81 virtual_dma_count=0;
82 doing_vdma = 0;
83 floppy_interrupt(irq, dev_id);
84 return IRQ_HANDLED;
86 return IRQ_HANDLED;
89 static void vdma_disable_dma(unsigned int dummy)
91 doing_vdma = 0;
92 virtual_dma_residue += virtual_dma_count;
93 virtual_dma_count=0;
96 static void vdma_nop(unsigned int dummy)
101 static int vdma_get_dma_residue(unsigned int dummy)
103 return virtual_dma_count + virtual_dma_residue;
107 static int fd_request_irq(void)
109 if (can_use_virtual_dma)
110 return request_irq(FLOPPY_IRQ, floppy_hardint,
111 IRQF_DISABLED, "floppy", NULL);
112 else
113 return request_irq(FLOPPY_IRQ, floppy_interrupt,
114 IRQF_DISABLED, "floppy", NULL);
117 static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
119 doing_vdma = 1;
120 virtual_dma_port = io;
121 virtual_dma_mode = (mode == DMA_MODE_WRITE);
122 virtual_dma_addr = addr;
123 virtual_dma_count = size;
124 virtual_dma_residue = 0;
125 return 0;
128 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
130 static unsigned long prev_size;
131 static dma_addr_t bus_addr = 0;
132 static char *prev_addr;
133 static int prev_dir;
134 int dir;
136 doing_vdma = 0;
137 dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
139 if (bus_addr
140 && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
141 /* different from last time -- unmap prev */
142 pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
143 bus_addr = 0;
146 if (!bus_addr) /* need to map it */
147 bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
149 /* remember this one as prev */
150 prev_addr = addr;
151 prev_size = size;
152 prev_dir = dir;
154 fd_clear_dma_ff();
155 fd_cacheflush(addr, size);
156 fd_set_dma_mode(mode);
157 set_dma_addr(FLOPPY_DMA, bus_addr);
158 fd_set_dma_count(size);
159 virtual_dma_port = io;
160 fd_enable_dma();
162 return 0;
165 static struct fd_dma_ops real_dma_ops =
167 ._disable_dma = disable_dma,
168 ._free_dma = free_dma,
169 ._get_dma_residue = get_dma_residue,
170 ._dma_setup = hard_dma_setup
173 static struct fd_dma_ops virt_dma_ops =
175 ._disable_dma = vdma_disable_dma,
176 ._free_dma = vdma_nop,
177 ._get_dma_residue = vdma_get_dma_residue,
178 ._dma_setup = vdma_dma_setup
181 static int fd_request_dma(void)
183 if (can_use_virtual_dma & 1) {
184 fd_ops = &virt_dma_ops;
185 return 0;
187 else {
188 fd_ops = &real_dma_ops;
189 return request_dma(FLOPPY_DMA, "floppy");
193 static int FDC1 = 0x3f0;
194 static int FDC2 = -1;
197 * Again, the CMOS information not available
199 #define FLOPPY0_TYPE 6
200 #define FLOPPY1_TYPE 0
202 #define N_FDC 2 /* Don't change this! */
203 #define N_DRIVE 8
206 * The PowerPC has no problems with floppy DMA crossing 64k borders.
208 #define CROSS_64KB(a,s) (0)
210 #define EXTRA_FLOPPY_PARAMS
212 #endif /* __KERNEL__ */
213 #endif /* __ASM_POWERPC_FLOPPY_H */