arch/powerpc/include/asm/pte-40x.h

   1 #ifndef _ASM_POWERPC_PTE_40x_H
   2 #define _ASM_POWERPC_PTE_40x_H
   3 #ifdef __KERNEL__
   4
   5 /*
   6  * At present, all PowerPC 400-class processors share a similar TLB
   7  * architecture. The instruction and data sides share a unified,
   8  * 64-entry, fully-associative TLB which is maintained totally under
   9  * software control. In addition, the instruction side has a
  10  * hardware-managed, 4-entry, fully-associative TLB which serves as a
  11  * first level to the shared TLB. These two TLBs are known as the UTLB
  12  * and ITLB, respectively (see "mmu.h" for definitions).
  13  *
  14  * There are several potential gotchas here.  The 40x hardware TLBLO
  15  * field looks like this:
  16  *
  17  * 0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  18  * RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
  19  *
  20  * Where possible we make the Linux PTE bits match up with this
  21  *
  22  * - bits 20 and 21 must be cleared, because we use 4k pages (40x can
  23  *   support down to 1k pages), this is done in the TLBMiss exception
  24  *   handler.
  25  * - We use only zones 0 (for kernel pages) and 1 (for user pages)
  26  *   of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
  27  *   miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
  28  *   zone.
  29  * - PRESENT *must* be in the bottom two bits because swap cache
  30  *   entries use the top 30 bits.  Because 40x doesn't support SMP
  31  *   anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
  32  *   is cleared in the TLB miss handler before the TLB entry is loaded.
  33  * - All other bits of the PTE are loaded into TLBLO without
  34  *   modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
  35  *   software PTE bits.  We actually use use bits 21, 24, 25, and
  36  *   30 respectively for the software bits: ACCESSED, DIRTY, RW, and
  37  *   PRESENT.
  38  */
  39
  40 #define _PAGE_GUARDED   0x001   /* G: page is guarded from prefetch */
  41 #define _PAGE_FILE      0x001   /* when !present: nonlinear file mapping */
  42 #define _PAGE_PRESENT   0x002   /* software: PTE contains a translation */
  43 #define _PAGE_NO_CACHE  0x004   /* I: caching is inhibited */
  44 #define _PAGE_WRITETHRU 0x008   /* W: caching is write-through */
  45 #define _PAGE_USER      0x010   /* matches one of the zone permission bits */
  46 #define _PAGE_RW        0x040   /* software: Writes permitted */
  47 #define _PAGE_DIRTY     0x080   /* software: dirty page */
  48 #define _PAGE_HWWRITE   0x100   /* hardware: Dirty & RW, set in exception */
  49 #define _PAGE_HWEXEC    0x200   /* hardware: EX permission */
  50 #define _PAGE_ACCESSED  0x400   /* software: R: page referenced */
  51
  52 #define _PMD_PRESENT    0x400   /* PMD points to page of PTEs */
  53 #define _PMD_BAD        0x802
  54 #define _PMD_SIZE       0x0e0   /* size field, != 0 for large-page PMD entry */
  55 #define _PMD_SIZE_4M    0x0c0
  56 #define _PMD_SIZE_16M   0x0e0
  57
  58 #define PMD_PAGE_SIZE(pmdval)   (1024 << (((pmdval) & _PMD_SIZE) >> 4))
  59
  60 /* Until my rework is finished, 40x still needs atomic PTE updates */
  61 #define PTE_ATOMIC_UPDATES      1
  62
  63 #endif /* __KERNEL__ */
  64 #endif /*  _ASM_POWERPC_PTE_40x_H */