OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / include / asm / tsi108.h
blobf8b60793b7a908f508904619ad2a8a023f6e82a1
1 /*
2 * common routine and memory layout for Tundra TSI108(Grendel) host bridge
3 * memory controller.
5 * Author: Jacob Pan (jacob.pan@freescale.com)
6 * Alex Bounine (alexandreb@tundra.com)
8 * Copyright 2004-2006 Freescale Semiconductor, Inc.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
16 #ifndef __PPC_KERNEL_TSI108_H
17 #define __PPC_KERNEL_TSI108_H
19 #include <asm/pci-bridge.h>
21 /* Size of entire register space */
22 #define TSI108_REG_SIZE (0x10000)
24 /* Sizes of register spaces for individual blocks */
25 #define TSI108_HLP_SIZE 0x1000
26 #define TSI108_PCI_SIZE 0x1000
27 #define TSI108_CLK_SIZE 0x1000
28 #define TSI108_PB_SIZE 0x1000
29 #define TSI108_SD_SIZE 0x1000
30 #define TSI108_DMA_SIZE 0x1000
31 #define TSI108_ETH_SIZE 0x1000
32 #define TSI108_I2C_SIZE 0x400
33 #define TSI108_MPIC_SIZE 0x400
34 #define TSI108_UART0_SIZE 0x200
35 #define TSI108_GPIO_SIZE 0x200
36 #define TSI108_UART1_SIZE 0x200
38 /* Offsets within Tsi108(A) CSR space for individual blocks */
39 #define TSI108_HLP_OFFSET 0x0000
40 #define TSI108_PCI_OFFSET 0x1000
41 #define TSI108_CLK_OFFSET 0x2000
42 #define TSI108_PB_OFFSET 0x3000
43 #define TSI108_SD_OFFSET 0x4000
44 #define TSI108_DMA_OFFSET 0x5000
45 #define TSI108_ETH_OFFSET 0x6000
46 #define TSI108_I2C_OFFSET 0x7000
47 #define TSI108_MPIC_OFFSET 0x7400
48 #define TSI108_UART0_OFFSET 0x7800
49 #define TSI108_GPIO_OFFSET 0x7A00
50 #define TSI108_UART1_OFFSET 0x7C00
52 /* Tsi108 registers used by common code components */
53 #define TSI108_PCI_CSR (0x004)
54 #define TSI108_PCI_IRP_CFG_CTL (0x180)
55 #define TSI108_PCI_IRP_STAT (0x184)
56 #define TSI108_PCI_IRP_ENABLE (0x188)
57 #define TSI108_PCI_IRP_INTAD (0x18C)
59 #define TSI108_PCI_IRP_STAT_P_INT (0x00400000)
60 #define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000)
62 #define TSI108_CG_PWRUP_STATUS (0x234)
64 #define TSI108_PB_ISR (0x00C)
65 #define TSI108_PB_ERRCS (0x404)
66 #define TSI108_PB_AERR (0x408)
68 #define TSI108_PB_ERRCS_ES (1 << 1)
69 #define TSI108_PB_ISR_PBS_RD_ERR (1 << 8)
71 #define TSI108_PCI_CFG_SIZE (0x01000000)
74 * PHY Configuration Options
76 * Specify "bcm54xx" in the compatible property of your device tree phy
77 * nodes if your board uses the Broadcom PHYs
79 #define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */
80 #define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */
82 /* Global variables */
84 extern u32 tsi108_pci_cfg_base;
85 /* Exported functions */
87 extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
88 extern unsigned long tsi108_get_mem_size(void);
89 extern unsigned long tsi108_get_cpu_clk(void);
90 extern unsigned long tsi108_get_sdc_clk(void);
91 extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
92 int offset, int len, u32 val);
93 extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
94 int offset, int len, u32 * val);
95 extern void tsi108_clear_pci_error(u32 pci_cfg_base);
97 extern phys_addr_t get_csrbase(void);
99 typedef struct {
100 u32 regs; /* hw registers base address */
101 u32 phyregs; /* phy registers base address */
102 u16 phy; /* phy address */
103 u16 irq_num; /* irq number */
104 u8 mac_addr[6]; /* phy mac address */
105 u16 phy_type; /* type of phy on board */
106 } hw_info;
108 extern u32 get_vir_csrbase(void);
109 extern u32 tsi108_csr_vir_base;
111 static inline u32 tsi108_read_reg(u32 reg_offset)
113 return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
116 static inline void tsi108_write_reg(u32 reg_offset, u32 val)
118 out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
121 #endif /* __PPC_KERNEL_TSI108_H */