OMAP3: PM: Ensure MUSB block can idle when driver not loaded
[linux-ginger.git] / arch / powerpc / platforms / 83xx / mpc834x_mds.c
blobd0a634b056ca549040d79f0112de75e6062dbadf
1 /*
2 * arch/powerpc/platforms/83xx/mpc834x_mds.c
4 * MPC834x MDS board specific routines
6 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/seq_file.h>
25 #include <linux/root_dev.h>
26 #include <linux/of_platform.h>
28 #include <asm/system.h>
29 #include <asm/atomic.h>
30 #include <asm/time.h>
31 #include <asm/io.h>
32 #include <asm/machdep.h>
33 #include <asm/ipic.h>
34 #include <asm/irq.h>
35 #include <asm/prom.h>
36 #include <asm/udbg.h>
37 #include <sysdev/fsl_soc.h>
38 #include <sysdev/fsl_pci.h>
40 #include "mpc83xx.h"
42 #define BCSR5_INT_USB 0x02
43 static int mpc834xemds_usb_cfg(void)
45 struct device_node *np;
46 void __iomem *bcsr_regs = NULL;
47 u8 bcsr5;
49 mpc834x_usb_cfg();
50 /* Map BCSR area */
51 np = of_find_node_by_name(NULL, "bcsr");
52 if (np) {
53 struct resource res;
55 of_address_to_resource(np, 0, &res);
56 bcsr_regs = ioremap(res.start, res.end - res.start + 1);
57 of_node_put(np);
59 if (!bcsr_regs)
60 return -1;
63 * if Processor Board is plugged into PIB board,
64 * force to use the PHY on Processor Board
66 bcsr5 = in_8(bcsr_regs + 5);
67 if (!(bcsr5 & BCSR5_INT_USB))
68 out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
69 iounmap(bcsr_regs);
70 return 0;
73 /* ************************************************************************
75 * Setup the architecture
78 static void __init mpc834x_mds_setup_arch(void)
80 #ifdef CONFIG_PCI
81 struct device_node *np;
82 #endif
84 if (ppc_md.progress)
85 ppc_md.progress("mpc834x_mds_setup_arch()", 0);
87 #ifdef CONFIG_PCI
88 for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
89 mpc83xx_add_bridge(np);
90 #endif
92 mpc834xemds_usb_cfg();
95 static void __init mpc834x_mds_init_IRQ(void)
97 struct device_node *np;
99 np = of_find_node_by_type(NULL, "ipic");
100 if (!np)
101 return;
103 ipic_init(np, 0);
105 /* Initialize the default interrupt mapping priorities,
106 * in case the boot rom changed something on us.
108 ipic_set_default_priority();
111 static struct of_device_id mpc834x_ids[] = {
112 { .type = "soc", },
113 { .compatible = "soc", },
114 { .compatible = "simple-bus", },
115 { .compatible = "gianfar", },
119 static int __init mpc834x_declare_of_platform_devices(void)
121 of_platform_bus_probe(NULL, mpc834x_ids, NULL);
122 return 0;
124 machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
127 * Called very early, MMU is off, device-tree isn't unflattened
129 static int __init mpc834x_mds_probe(void)
131 unsigned long root = of_get_flat_dt_root();
133 return of_flat_dt_is_compatible(root, "MPC834xMDS");
136 define_machine(mpc834x_mds) {
137 .name = "MPC834x MDS",
138 .probe = mpc834x_mds_probe,
139 .setup_arch = mpc834x_mds_setup_arch,
140 .init_IRQ = mpc834x_mds_init_IRQ,
141 .get_irq = ipic_get_irq,
142 .restart = mpc83xx_restart,
143 .time_init = mpc83xx_time_init,
144 .calibrate_decr = generic_calibrate_decr,
145 .progress = udbg_progress,