2 * MPC83xx suspend support
4 * Author: Scott Wood <scottwood@freescale.com>
6 * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published
10 * by the Free Software Foundation.
13 #include <linux/init.h>
15 #include <linux/types.h>
16 #include <linux/ioport.h>
17 #include <linux/interrupt.h>
18 #include <linux/wait.h>
19 #include <linux/kthread.h>
20 #include <linux/freezer.h>
21 #include <linux/suspend.h>
22 #include <linux/fsl_devices.h>
23 #include <linux/of_platform.h>
28 #include <asm/mpc6xx.h>
30 #include <sysdev/fsl_soc.h>
32 #define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */
33 #define PMCCR1_NEXT_STATE_SHIFT 2
34 #define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/
35 #define IMMR_RCW_OFFSET 0x900
36 #define RCW_PCI_HOST 0x80000000
38 void mpc83xx_enter_deep_sleep(phys_addr_t immrbase
);
42 #define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
43 #define PMCCR_SLPEN 1 /* System low power enable */
47 /* All but PMCI are deep-sleep only */
48 #define PMCER_GPIO 0x100
49 #define PMCER_PCI 0x080
50 #define PMCER_USB 0x040
51 #define PMCER_ETSEC1 0x020
52 #define PMCER_ETSEC2 0x010
53 #define PMCER_TIMER 0x008
54 #define PMCER_INT1 0x004
55 #define PMCER_INT2 0x002
56 #define PMCER_PMCI 0x001
57 #define PMCER_ALL 0x1FF
61 #define PMCCR1_USE_STATE 0x80000000
62 #define PMCCR1_PME_EN 0x00000080
63 #define PMCCR1_ASSERT_PME 0x00000040
64 #define PMCCR1_POWER_OFF 0x00000020
75 struct mpc83xx_clock
{
85 static struct of_device
*pmc_dev
;
86 static int has_deep_sleep
, deep_sleeping
;
88 static struct mpc83xx_pmc __iomem
*pmc_regs
;
89 static struct mpc83xx_clock __iomem
*clock_regs
;
90 static int is_pci_agent
, wake_from_pci
;
91 static phys_addr_t immrbase
;
92 static int pci_pm_state
;
93 static DECLARE_WAIT_QUEUE_HEAD(agent_wq
);
95 int fsl_deep_sleep(void)
100 static int mpc83xx_change_state(void)
103 u32 reg_cfg1
= in_be32(&pmc_regs
->config1
);
106 pci_pm_state
= (reg_cfg1
& PMCCR1_NEXT_STATE
) >>
107 PMCCR1_NEXT_STATE_SHIFT
;
108 curr_state
= reg_cfg1
& PMCCR1_CURR_STATE
;
110 if (curr_state
!= pci_pm_state
) {
111 reg_cfg1
&= ~PMCCR1_CURR_STATE
;
112 reg_cfg1
|= pci_pm_state
;
113 out_be32(&pmc_regs
->config1
, reg_cfg1
);
123 static irqreturn_t
pmc_irq_handler(int irq
, void *dev_id
)
125 u32 event
= in_be32(&pmc_regs
->event
);
128 if (mpc83xx_change_state())
132 out_be32(&pmc_regs
->event
, event
);
139 static int mpc83xx_suspend_enter(suspend_state_t state
)
143 /* Don't go to sleep if there's a race where pci_pm_state changes
144 * between the agent thread checking it and the PM code disabling
148 if (pci_pm_state
!= (deep_sleeping
? 3 : 2))
151 out_be32(&pmc_regs
->config1
,
152 in_be32(&pmc_regs
->config1
) | PMCCR1_PME_EN
);
155 /* Put the system into low-power mode and the RAM
156 * into self-refresh mode once the core goes to
160 out_be32(&pmc_regs
->config
, PMCCR_SLPEN
| PMCCR_DLPEN
);
162 /* If it has deep sleep (i.e. it's an 831x or compatible),
163 * disable power to the core upon entering sleep mode. This will
164 * require going through the boot firmware upon a wakeup event.
168 out_be32(&pmc_regs
->mask
, PMCER_ALL
);
170 out_be32(&pmc_regs
->config1
,
171 in_be32(&pmc_regs
->config1
) | PMCCR1_POWER_OFF
);
175 mpc83xx_enter_deep_sleep(immrbase
);
177 out_be32(&pmc_regs
->config1
,
178 in_be32(&pmc_regs
->config1
) & ~PMCCR1_POWER_OFF
);
180 out_be32(&pmc_regs
->mask
, PMCER_PMCI
);
182 out_be32(&pmc_regs
->mask
, PMCER_PMCI
);
184 mpc6xx_enter_standby();
190 out_be32(&pmc_regs
->config1
,
191 in_be32(&pmc_regs
->config1
) & ~PMCCR1_PME_EN
);
196 static void mpc83xx_suspend_finish(void)
201 static int mpc83xx_suspend_valid(suspend_state_t state
)
203 return state
== PM_SUSPEND_STANDBY
|| state
== PM_SUSPEND_MEM
;
206 static int mpc83xx_suspend_begin(suspend_state_t state
)
209 case PM_SUSPEND_STANDBY
:
224 static int agent_thread_fn(void *data
)
227 wait_event_interruptible(agent_wq
, pci_pm_state
>= 2);
230 if (signal_pending(current
) || pci_pm_state
< 2)
233 /* With a preemptible kernel (or SMP), this could race with
234 * a userspace-driven suspend request. It's probably best
235 * to avoid mixing the two with such a configuration (or
236 * else fix it by adding a mutex to state_store that we can
242 pm_suspend(pci_pm_state
== 3 ? PM_SUSPEND_MEM
:
251 static void mpc83xx_set_agent(void)
253 out_be32(&pmc_regs
->config1
, PMCCR1_USE_STATE
);
254 out_be32(&pmc_regs
->mask
, PMCER_PMCI
);
256 kthread_run(agent_thread_fn
, NULL
, "PCI power mgt");
259 static int mpc83xx_is_pci_agent(void)
261 struct mpc83xx_rcw __iomem
*rcw_regs
;
264 rcw_regs
= ioremap(get_immrbase() + IMMR_RCW_OFFSET
,
265 sizeof(struct mpc83xx_rcw
));
270 ret
= !(in_be32(&rcw_regs
->rcwhr
) & RCW_PCI_HOST
);
276 static struct platform_suspend_ops mpc83xx_suspend_ops
= {
277 .valid
= mpc83xx_suspend_valid
,
278 .begin
= mpc83xx_suspend_begin
,
279 .enter
= mpc83xx_suspend_enter
,
280 .finish
= mpc83xx_suspend_finish
,
283 static int pmc_probe(struct of_device
*ofdev
,
284 const struct of_device_id
*match
)
286 struct device_node
*np
= ofdev
->node
;
288 struct pmc_type
*type
= match
->data
;
291 if (!of_device_is_available(np
))
294 has_deep_sleep
= type
->has_deep_sleep
;
295 immrbase
= get_immrbase();
298 is_pci_agent
= mpc83xx_is_pci_agent();
299 if (is_pci_agent
< 0)
302 ret
= of_address_to_resource(np
, 0, &res
);
306 pmc_irq
= irq_of_parse_and_map(np
, 0);
307 if (pmc_irq
!= NO_IRQ
) {
308 ret
= request_irq(pmc_irq
, pmc_irq_handler
, IRQF_SHARED
,
315 pmc_regs
= ioremap(res
.start
, sizeof(struct mpc83xx_pmc
));
322 ret
= of_address_to_resource(np
, 1, &res
);
328 clock_regs
= ioremap(res
.start
, sizeof(struct mpc83xx_pmc
));
338 suspend_set_ops(&mpc83xx_suspend_ops
);
344 if (pmc_irq
!= NO_IRQ
)
345 free_irq(pmc_irq
, ofdev
);
350 static int pmc_remove(struct of_device
*ofdev
)
355 static struct pmc_type pmc_types
[] = {
364 static struct of_device_id pmc_match
[] = {
366 .compatible
= "fsl,mpc8313-pmc",
367 .data
= &pmc_types
[0],
370 .compatible
= "fsl,mpc8349-pmc",
371 .data
= &pmc_types
[1],
376 static struct of_platform_driver pmc_driver
= {
377 .name
= "mpc83xx-pmc",
378 .match_table
= pmc_match
,
383 static int pmc_init(void)
385 return of_register_platform_driver(&pmc_driver
);
388 module_init(pmc_init
);