2 * arch/arm/mach-at91/include/mach/at91_mci.h
4 * Copyright (C) 2005 Ivan Kokshaysky
5 * Copyright (C) SAN People
7 * MultiMedia Card Interface (MCI) registers.
8 * Based on AT91RM9200 datasheet revision F.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
19 #define AT91_MCI_CR 0x00 /* Control Register */
20 #define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
21 #define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
22 #define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
23 #define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
24 #define AT91_MCI_SWRST (1 << 7) /* Software Reset */
26 #define AT91_MCI_MR 0x04 /* Mode Register */
27 #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
28 #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
29 #define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
30 #define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
31 #define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
32 #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
33 #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
34 #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
36 #define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
37 #define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
38 #define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
39 #define AT91_MCI_DTOMUL_1 (0 << 4)
40 #define AT91_MCI_DTOMUL_16 (1 << 4)
41 #define AT91_MCI_DTOMUL_128 (2 << 4)
42 #define AT91_MCI_DTOMUL_256 (3 << 4)
43 #define AT91_MCI_DTOMUL_1K (4 << 4)
44 #define AT91_MCI_DTOMUL_4K (5 << 4)
45 #define AT91_MCI_DTOMUL_64K (6 << 4)
46 #define AT91_MCI_DTOMUL_1M (7 << 4)
48 #define AT91_MCI_SDCR 0x0c /* SD Card Register */
49 #define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
50 #define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
52 #define AT91_MCI_ARGR 0x10 /* Argument Register */
54 #define AT91_MCI_CMDR 0x14 /* Command Register */
55 #define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
56 #define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
57 #define AT91_MCI_RSPTYP_NONE (0 << 6)
58 #define AT91_MCI_RSPTYP_48 (1 << 6)
59 #define AT91_MCI_RSPTYP_136 (2 << 6)
60 #define AT91_MCI_SPCMD (7 << 8) /* Special Command */
61 #define AT91_MCI_SPCMD_NONE (0 << 8)
62 #define AT91_MCI_SPCMD_INIT (1 << 8)
63 #define AT91_MCI_SPCMD_SYNC (2 << 8)
64 #define AT91_MCI_SPCMD_ICMD (4 << 8)
65 #define AT91_MCI_SPCMD_IRESP (5 << 8)
66 #define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
67 #define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
68 #define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
69 #define AT91_MCI_TRCMD_NONE (0 << 16)
70 #define AT91_MCI_TRCMD_START (1 << 16)
71 #define AT91_MCI_TRCMD_STOP (2 << 16)
72 #define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
73 #define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
74 #define AT91_MCI_TRTYP_BLOCK (0 << 19)
75 #define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
76 #define AT91_MCI_TRTYP_STREAM (2 << 19)
78 #define AT91_MCI_BLKR 0x18 /* Block Register */
79 #define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
80 #define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
82 #define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
83 #define AT91_MCR_RDR 0x30 /* Receive Data Register */
84 #define AT91_MCR_TDR 0x34 /* Transmit Data Register */
86 #define AT91_MCI_SR 0x40 /* Status Register */
87 #define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
88 #define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
89 #define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
90 #define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
91 #define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
92 #define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
93 #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
94 #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
95 #define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
96 #define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
97 #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
98 #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
99 #define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
100 #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
101 #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
102 #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
103 #define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
104 #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
105 #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
106 #define AT91_MCI_OVRE (1 << 30) /* Overrun */
107 #define AT91_MCI_UNRE (1 << 31) /* Underrun */
109 #define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
110 #define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
111 #define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
