Full support for Ginger Console
[linux-ginger.git] / arch / arm / mach-orion5x / rd88f5181l-ge-setup.c
blobee1399ff0cedbe38aab1f8a4ff82dbdb921158be
1 /*
2 * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
4 * Marvell Orion-VoIP GE Reference Design Setup
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/pci.h>
15 #include <linux/irq.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mv643xx_eth.h>
18 #include <linux/ethtool.h>
19 #include <linux/i2c.h>
20 #include <net/dsa.h>
21 #include <asm/mach-types.h>
22 #include <asm/gpio.h>
23 #include <asm/leds.h>
24 #include <asm/mach/arch.h>
25 #include <asm/mach/pci.h>
26 #include <mach/orion5x.h>
27 #include "common.h"
28 #include "mpp.h"
30 /*****************************************************************************
31 * RD-88F5181L GE Info
32 ****************************************************************************/
34 * 16M NOR flash Device bus boot chip select
36 #define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
37 #define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
40 /*****************************************************************************
41 * 16M NOR Flash on Device bus Boot chip select
42 ****************************************************************************/
43 static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
44 .width = 1,
47 static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
48 .flags = IORESOURCE_MEM,
49 .start = RD88F5181L_GE_NOR_BOOT_BASE,
50 .end = RD88F5181L_GE_NOR_BOOT_BASE +
51 RD88F5181L_GE_NOR_BOOT_SIZE - 1,
54 static struct platform_device rd88f5181l_ge_nor_boot_flash = {
55 .name = "physmap-flash",
56 .id = 0,
57 .dev = {
58 .platform_data = &rd88f5181l_ge_nor_boot_flash_data,
60 .num_resources = 1,
61 .resource = &rd88f5181l_ge_nor_boot_flash_resource,
65 /*****************************************************************************
66 * General Setup
67 ****************************************************************************/
68 static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
69 { 0, MPP_GPIO }, /* LED1 */
70 { 1, MPP_GPIO }, /* LED5 */
71 { 2, MPP_GPIO }, /* LED4 */
72 { 3, MPP_GPIO }, /* LED3 */
73 { 4, MPP_GPIO }, /* PCI_intA */
74 { 5, MPP_GPIO }, /* RTC interrupt */
75 { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
76 { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
77 { 8, MPP_GPIO }, /* 88e6131 interrupt */
78 { 9, MPP_GPIO }, /* GE_RXERR */
79 { 10, MPP_GPIO }, /* PCI_intB */
80 { 11, MPP_GPIO }, /* LED2 */
81 { 12, MPP_GIGE }, /* GE_TXD[4] */
82 { 13, MPP_GIGE }, /* GE_TXD[5] */
83 { 14, MPP_GIGE }, /* GE_TXD[6] */
84 { 15, MPP_GIGE }, /* GE_TXD[7] */
85 { 16, MPP_GIGE }, /* GE_RXD[4] */
86 { 17, MPP_GIGE }, /* GE_RXD[5] */
87 { 18, MPP_GIGE }, /* GE_RXD[6] */
88 { 19, MPP_GIGE }, /* GE_RXD[7] */
89 { -1 },
92 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
93 .phy_addr = MV643XX_ETH_PHY_NONE,
94 .speed = SPEED_1000,
95 .duplex = DUPLEX_FULL,
98 static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
99 .port_names[0] = "lan2",
100 .port_names[1] = "lan1",
101 .port_names[2] = "wan",
102 .port_names[3] = "cpu",
103 .port_names[5] = "lan4",
104 .port_names[7] = "lan3",
107 static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
108 .nr_chips = 1,
109 .chip = &rd88f5181l_ge_switch_chip_data,
112 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
113 I2C_BOARD_INFO("ds1338", 0x68),
116 static void __init rd88f5181l_ge_init(void)
119 * Setup basic Orion functions. Need to be called early.
121 orion5x_init();
123 orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
126 * Configure peripherals.
128 orion5x_ehci0_init();
129 orion5x_eth_init(&rd88f5181l_ge_eth_data);
130 orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
131 gpio_to_irq(8));
132 orion5x_i2c_init();
133 orion5x_uart0_init();
135 orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
136 RD88F5181L_GE_NOR_BOOT_SIZE);
137 platform_device_register(&rd88f5181l_ge_nor_boot_flash);
139 i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
142 static int __init
143 rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
145 int irq;
148 * Check for devices with hard-wired IRQs.
150 irq = orion5x_pci_map_irq(dev, slot, pin);
151 if (irq != -1)
152 return irq;
155 * Cardbus slot.
157 if (pin == 1)
158 return gpio_to_irq(4);
159 else
160 return gpio_to_irq(10);
163 static struct hw_pci rd88f5181l_ge_pci __initdata = {
164 .nr_controllers = 2,
165 .swizzle = pci_std_swizzle,
166 .setup = orion5x_pci_sys_setup,
167 .scan = orion5x_pci_sys_scan_bus,
168 .map_irq = rd88f5181l_ge_pci_map_irq,
171 static int __init rd88f5181l_ge_pci_init(void)
173 if (machine_is_rd88f5181l_ge()) {
174 orion5x_pci_set_cardbus_mode();
175 pci_common_init(&rd88f5181l_ge_pci);
178 return 0;
180 subsys_initcall(rd88f5181l_ge_pci_init);
182 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
183 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
184 .phys_io = ORION5X_REGS_PHYS_BASE,
185 .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
186 .boot_params = 0x00000100,
187 .init_machine = rd88f5181l_ge_init,
188 .map_io = orion5x_map_io,
189 .init_irq = orion5x_init_irq,
190 .timer = &orion5x_timer,
191 .fixup = tag_fixup_mem32,
192 MACHINE_END