Full support for Ginger Console

[linux-ginger.git] / arch / arm / mach-u300 / core.c

/*
 *
 * arch/arm/mach-u300/core.c
 *
 *
 * Copyright (C) 2007-2009 ST-Ericsson AB
 * License terms: GNU General Public License (GPL) version 2
 * Core platform support, IRQ handling and device definitions.
 * Author: Linus Walleij <linus.walleij@stericsson.com>
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>

#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/hardware.h>
#include <mach/syscon.h>

#include "clock.h"
#include "mmc.h"
#include "spi.h"
#include "i2c.h"

/*
 * Static I/O mappings that are needed for booting the U300 platforms. The
 * only things we need are the areas where we find the timer, syscon and
 * intcon, since the remaining device drivers will map their own memory
 * physical to virtual as the need arise.
 */
static struct map_desc u300_io_desc[] __initdata = {
        {
                .virtual        = U300_SLOW_PER_VIRT_BASE,
                .pfn            = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
                .length         = SZ_64K,
                .type           = MT_DEVICE,
        },
        {
                .virtual        = U300_AHB_PER_VIRT_BASE,
                .pfn            = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
                .length         = SZ_32K,
                .type           = MT_DEVICE,
        },
        {
                .virtual        = U300_FAST_PER_VIRT_BASE,
                .pfn            = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
                .length         = SZ_32K,
                .type           = MT_DEVICE,
        },
        {
                .virtual        = 0xffff2000, /* TCM memory */
                .pfn            = __phys_to_pfn(0xffff2000),
                .length         = SZ_16K,
                .type           = MT_DEVICE,
        },

        /*
         * This overlaps with the IRQ vectors etc at 0xffff0000, so these
         * may have to be moved to 0x00000000 in order to use the ROM.
         */
        /*
        {
                .virtual        = U300_BOOTROM_VIRT_BASE,
                .pfn            = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
                .length         = SZ_64K,
                .type           = MT_ROM,
        },
        */
};

void __init u300_map_io(void)
{
        iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
}

/*
 * Declaration of devices found on the U300 board and
 * their respective memory locations.
 */
static struct amba_device uart0_device = {
        .dev = {
                .init_name = "uart0", /* Slow device at 0x3000 offset */
                .platform_data = NULL,
        },
        .res = {
                .start = U300_UART0_BASE,
                .end   = U300_UART0_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        .irq = { IRQ_U300_UART0, NO_IRQ },
};

/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
static struct amba_device uart1_device = {
        .dev = {
                .init_name = "uart1", /* Fast device at 0x7000 offset */
                .platform_data = NULL,
        },
        .res = {
                .start = U300_UART1_BASE,
                .end   = U300_UART1_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        .irq = { IRQ_U300_UART1, NO_IRQ },
};
#endif

static struct amba_device pl172_device = {
        .dev = {
                .init_name = "pl172", /* AHB device at 0x4000 offset */
                .platform_data = NULL,
        },
        .res = {
                .start = U300_EMIF_CFG_BASE,
                .end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
};


/*
 * Everything within this next ifdef deals with external devices connected to
 * the APP SPI bus.
 */
static struct amba_device pl022_device = {
        .dev = {
                .coherent_dma_mask = ~0,
                .init_name = "pl022", /* Fast device at 0x6000 offset */
        },
        .res = {
                .start = U300_SPI_BASE,
                .end   = U300_SPI_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        .irq = {IRQ_U300_SPI, NO_IRQ },
        /*
         * This device has a DMA channel but the Linux driver does not use
         * it currently.
         */
};

static struct amba_device mmcsd_device = {
        .dev = {
                .init_name = "mmci", /* Fast device at 0x1000 offset */
                .platform_data = NULL, /* Added later */
        },
        .res = {
                .start = U300_MMCSD_BASE,
                .end   = U300_MMCSD_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
        /*
         * This device has a DMA channel but the Linux driver does not use
         * it currently.
         */
};

/*
 * The order of device declaration may be important, since some devices
 * have dependencies on other devices being initialized first.
 */
static struct amba_device *amba_devs[] __initdata = {
        &uart0_device,
#ifdef CONFIG_MACH_U300_BS335
        &uart1_device,
#endif
        &pl022_device,
        &pl172_device,
        &mmcsd_device,
};

/* Here follows a list of all hw resources that the platform devices
 * allocate. Note, clock dependencies are not included
 */

static struct resource gpio_resources[] = {
        {
                .start = U300_GPIO_BASE,
                .end   = (U300_GPIO_BASE + SZ_4K - 1),
                .flags = IORESOURCE_MEM,
        },
        {
                .name  = "gpio0",
                .start = IRQ_U300_GPIO_PORT0,
                .end   = IRQ_U300_GPIO_PORT0,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "gpio1",
                .start = IRQ_U300_GPIO_PORT1,
                .end   = IRQ_U300_GPIO_PORT1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "gpio2",
                .start = IRQ_U300_GPIO_PORT2,
                .end   = IRQ_U300_GPIO_PORT2,
                .flags = IORESOURCE_IRQ,
        },
#ifdef U300_COH901571_3
        {
                .name  = "gpio3",
                .start = IRQ_U300_GPIO_PORT3,
                .end   = IRQ_U300_GPIO_PORT3,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "gpio4",
                .start = IRQ_U300_GPIO_PORT4,
                .end   = IRQ_U300_GPIO_PORT4,
                .flags = IORESOURCE_IRQ,
        },
#ifdef CONFIG_MACH_U300_BS335
        {
                .name  = "gpio5",
                .start = IRQ_U300_GPIO_PORT5,
                .end   = IRQ_U300_GPIO_PORT5,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "gpio6",
                .start = IRQ_U300_GPIO_PORT6,
                .end   = IRQ_U300_GPIO_PORT6,
                .flags = IORESOURCE_IRQ,
        },
#endif /* CONFIG_MACH_U300_BS335 */
#endif /* U300_COH901571_3 */
};

static struct resource keypad_resources[] = {
        {
                .start = U300_KEYPAD_BASE,
                .end   = U300_KEYPAD_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .name  = "coh901461-press",
                .start = IRQ_U300_KEYPAD_KEYBF,
                .end   = IRQ_U300_KEYPAD_KEYBF,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "coh901461-release",
                .start = IRQ_U300_KEYPAD_KEYBR,
                .end   = IRQ_U300_KEYPAD_KEYBR,
                .flags = IORESOURCE_IRQ,
        },
};

static struct resource rtc_resources[] = {
        {
                .start = U300_RTC_BASE,
                .end   = U300_RTC_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_U300_RTC,
                .end   = IRQ_U300_RTC,
                .flags = IORESOURCE_IRQ,
        },
};

/*
 * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
 * but these are not yet used by the driver.
 */
static struct resource fsmc_resources[] = {
        {
                .start = U300_NAND_IF_PHYS_BASE,
                .end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
};

static struct resource i2c0_resources[] = {
        {
                .start = U300_I2C0_BASE,
                .end   = U300_I2C0_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_U300_I2C0,
                .end   = IRQ_U300_I2C0,
                .flags = IORESOURCE_IRQ,
        },
};

static struct resource i2c1_resources[] = {
        {
                .start = U300_I2C1_BASE,
                .end   = U300_I2C1_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_U300_I2C1,
                .end   = IRQ_U300_I2C1,
                .flags = IORESOURCE_IRQ,
        },

};

static struct resource wdog_resources[] = {
        {
                .start = U300_WDOG_BASE,
                .end   = U300_WDOG_BASE + SZ_4K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_U300_WDOG,
                .end   = IRQ_U300_WDOG,
                .flags = IORESOURCE_IRQ,
        }
};

/* TODO: These should be protected by suitable #ifdef's */
static struct resource ave_resources[] = {
        {
                .name  = "AVE3e I/O Area",
                .start = U300_VIDEOENC_BASE,
                .end   = U300_VIDEOENC_BASE + SZ_512K - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .name  = "AVE3e IRQ0",
                .start = IRQ_U300_VIDEO_ENC_0,
                .end   = IRQ_U300_VIDEO_ENC_0,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "AVE3e IRQ1",
                .start = IRQ_U300_VIDEO_ENC_1,
                .end   = IRQ_U300_VIDEO_ENC_1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .name  = "AVE3e Physmem Area",
                .start = 0, /* 0 will be remapped to reserved memory */
                .end   = SZ_1M - 1,
                .flags = IORESOURCE_MEM,
        },
        /*
         * The AVE3e requires two regions of 256MB that it considers
         * "invisible". The hardware will not be able to access these
         * adresses, so they should never point to system RAM.
         */
        {
                .name  = "AVE3e Reserved 0",
                .start = 0xd0000000,
                .end   = 0xd0000000 + SZ_256M - 1,
                .flags = IORESOURCE_MEM,
        },
        {
                .name  = "AVE3e Reserved 1",
                .start = 0xe0000000,
                .end   = 0xe0000000 + SZ_256M - 1,
                .flags = IORESOURCE_MEM,
        },
};

static struct platform_device wdog_device = {
        .name = "wdog",
        .id = -1,
        .num_resources = ARRAY_SIZE(wdog_resources),
        .resource = wdog_resources,
};

static struct platform_device i2c0_device = {
        .name = "stu300",
        .id = 0,
        .num_resources = ARRAY_SIZE(i2c0_resources),
        .resource = i2c0_resources,
};

static struct platform_device i2c1_device = {
        .name = "stu300",
        .id = 1,
        .num_resources = ARRAY_SIZE(i2c1_resources),
        .resource = i2c1_resources,
};

static struct platform_device gpio_device = {
        .name = "u300-gpio",
        .id = -1,
        .num_resources = ARRAY_SIZE(gpio_resources),
        .resource = gpio_resources,
};

static struct platform_device keypad_device = {
        .name = "keypad",
        .id = -1,
        .num_resources = ARRAY_SIZE(keypad_resources),
        .resource = keypad_resources,
};

static struct platform_device rtc_device = {
        .name = "rtc0",
        .id = -1,
        .num_resources = ARRAY_SIZE(rtc_resources),
        .resource = rtc_resources,
};

static struct platform_device fsmc_device = {
        .name = "nandif",
        .id = -1,
        .num_resources = ARRAY_SIZE(fsmc_resources),
        .resource = fsmc_resources,
};

static struct platform_device ave_device = {
        .name = "video_enc",
        .id = -1,
        .num_resources = ARRAY_SIZE(ave_resources),
        .resource = ave_resources,
};

/*
 * Notice that AMBA devices are initialized before platform devices.
 *
 */
static struct platform_device *platform_devs[] __initdata = {
        &i2c0_device,
        &i2c1_device,
        &keypad_device,
        &rtc_device,
        &gpio_device,
        &fsmc_device,
        &wdog_device,
        &ave_device
};


/*
 * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
 * together so some interrupts are connected to the first one and some
 * to the second one.
 */
void __init u300_init_irq(void)
{
        u32 mask[2] = {0, 0};
        int i;

        for (i = 0; i < NR_IRQS; i++)
                set_bit(i, (unsigned long *) &mask[0]);
        u300_enable_intcon_clock();
        vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
        vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
}


/*
 * U300 platforms peripheral handling
 */
struct db_chip {
        u16 chipid;
        const char *name;
};

/*
 * This is a list of the Digital Baseband chips used in the U300 platform.
 */
static struct db_chip db_chips[] __initdata = {
        {
                .chipid = 0xb800,
                .name = "DB3000",
        },
        {
                .chipid = 0xc000,
                .name = "DB3100",
        },
        {
                .chipid = 0xc800,
                .name = "DB3150",
        },
        {
                .chipid = 0xd800,
                .name = "DB3200",
        },
        {
                .chipid = 0xe000,
                .name = "DB3250",
        },
        {
                .chipid = 0xe800,
                .name = "DB3210",
        },
        {
                .chipid = 0xf000,
                .name = "DB3350 P1x",
        },
        {
                .chipid = 0xf100,
                .name = "DB3350 P2x",
        },
        {
                .chipid = 0x0000, /* List terminator */
                .name = NULL,
        }
};

static void __init u300_init_check_chip(void)
{

        u16 val;
        struct db_chip *chip;
        const char *chipname;
        const char unknown[] = "UNKNOWN";

        /* Read out and print chip ID */
        val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
        /* This is in funky bigendian order... */
        val = (val & 0xFFU) << 8 | (val >> 8);
        chip = db_chips;
        chipname = unknown;

        for ( ; chip->chipid; chip++) {
                if (chip->chipid == (val & 0xFF00U)) {
                        chipname = chip->name;
                        break;
                }
        }
        printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
               "(chip ID 0x%04x)\n", chipname, val);

#ifdef CONFIG_MACH_U300_BS26
        if ((val & 0xFF00U) != 0xc800) {
                printk(KERN_ERR "Platform configured for BS25/BS26 " \
                       "with DB3150 but %s detected, expect problems!",
                       chipname);
        }
#endif
#ifdef CONFIG_MACH_U300_BS330
        if ((val & 0xFF00U) != 0xd800) {
                printk(KERN_ERR "Platform configured for BS330 " \
                       "with DB3200 but %s detected, expect problems!",
                       chipname);
        }
#endif
#ifdef CONFIG_MACH_U300_BS335
        if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
                printk(KERN_ERR "Platform configured for BS365 " \
                       " with DB3350 but %s detected, expect problems!",
                       chipname);
        }
#endif
#ifdef CONFIG_MACH_U300_BS365
        if ((val & 0xFF00U) != 0xe800) {
                printk(KERN_ERR "Platform configured for BS365 " \
                       "with DB3210 but %s detected, expect problems!",
                       chipname);
        }
#endif


}

/*
 * Some devices and their resources require reserved physical memory from
 * the end of the available RAM. This function traverses the list of devices
 * and assigns actual adresses to these.
 */
static void __init u300_assign_physmem(void)
{
        unsigned long curr_start = __pa(high_memory);
        int i, j;

        for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
                for (j = 0; j < platform_devs[i]->num_resources; j++) {
                        struct resource *const res =
                          &platform_devs[i]->resource[j];

                        if (IORESOURCE_MEM == res->flags &&
                                     0 == res->start) {
                                res->start  = curr_start;
                                res->end   += curr_start;
                                curr_start += (res->end - res->start + 1);

                                printk(KERN_INFO "core.c: Mapping RAM " \
                                       "%#x-%#x to device %s:%s\n",
                                        res->start, res->end,
                                       platform_devs[i]->name, res->name);
                        }
                }
        }
}

void __init u300_init_devices(void)
{
        int i;
        u16 val;

        /* Check what platform we run and print some status information */
        u300_init_check_chip();

        /* Set system to run at PLL208, max performance, a known state. */
        val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
        val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
        writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
        /* Wait for the PLL208 to lock if not locked in yet */
        while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
                 U300_SYSCON_CSR_PLL208_LOCK_IND));
        /* Initialize SPI device with some board specifics */
        u300_spi_init(&pl022_device);

        /* Register the AMBA devices in the AMBA bus abstraction layer */
        u300_clock_primecells();
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
                struct amba_device *d = amba_devs[i];
                amba_device_register(d, &iomem_resource);
        }
        u300_unclock_primecells();

        u300_assign_physmem();

        /* Register subdevices on the I2C buses */
        u300_i2c_register_board_devices();

        /* Register subdevices on the SPI bus */
        u300_spi_register_board_devices();

        /* Register the platform devices */
        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
        /*
         * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
         * both subsystems are requesting this mode.
         * If we not share the Acc SDRAM, this is never the case. Therefore
         * enable it here from the App side.
         */
        val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
                U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
        writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
}

static int core_module_init(void)
{
        /*
         * This needs to be initialized later: it needs the input framework
         * to be initialized first.
         */
        return mmc_init(&mmcsd_device);
}
module_init(core_module_init);