arch/blackfin/mach-common/arch_checks.c

   1 /*
   2  * Do some checking to make sure things are OK
   3  *
   4  * Copyright 2007-2009 Analog Devices Inc.
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <asm/fixed_code.h>
  10 #include <mach/anomaly.h>
  11 #include <asm/clocks.h>
  12
  13 #ifdef CONFIG_BFIN_KERNEL_CLOCK
  14
  15 # if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
  16 #  error "VCO selected is more than maximum value. Please change the VCO multipler"
  17 # endif
  18
  19 # if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
  20 # error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
  21 # endif
  22
  23 # if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
  24 # error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
  25 # endif
  26
  27 # if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
  28 # error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
  29 # endif
  30
  31 # if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
  32 # error "Please select sclk less than cclk"
  33 # endif
  34
  35 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
  36
  37 #if CONFIG_BOOT_LOAD < FIXED_CODE_END
  38 # error "The kernel load address must be after the fixed code section"
  39 #endif
  40
  41 #if (CONFIG_BOOT_LOAD & 0x3)
  42 # error "The kernel load address must be 4 byte aligned"
  43 #endif
  44
  45 /* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
  46 #if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
  47 # error "The kernel load address is too high; keep it below 10meg for safety"
  48 #endif
  49
  50 #if ANOMALY_05000448
  51 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
  52 #endif
  53
  54 /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
  55 #if ANOMALY_05000220 && \
  56         ((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
  57          (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
  58 # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
  59 #endif