arch/mips/kernel/sync-r4k.c

   1 /*
   2  * Count register synchronisation.
   3  *
   4  * All CPUs will have their count registers synchronised to the CPU0 next time
   5  * value. This can cause a small timewarp for CPU0. All other CPU's should
   6  * not have done anything significant (but they may have had interrupts
   7  * enabled briefly - prom_smp_finish() should not be responsible for enabling
   8  * interrupts...)
   9  *
  10  * FIXME: broken for SMTC
  11  */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/irqflags.h>
  16 #include <linux/cpumask.h>
  17
  18 #include <asm/r4k-timer.h>
  19 #include <asm/atomic.h>
  20 #include <asm/barrier.h>
  21 #include <asm/mipsregs.h>
  22
  23 static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
  24 static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
  25 static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
  26 static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
  27
  28 #define COUNTON 100
  29 #define NR_LOOPS 5
  30
  31 void __cpuinit synchronise_count_master(void)
  32 {
  33         int i;
  34         unsigned long flags;
  35         unsigned int initcount;
  36         int nslaves;
  37
  38 #ifdef CONFIG_MIPS_MT_SMTC
  39         /*
  40          * SMTC needs to synchronise per VPE, not per CPU
  41          * ignore for now
  42          */
  43         return;
  44 #endif
  45
  46         printk(KERN_INFO "Synchronize counters across %u CPUs: ",
  47                num_online_cpus());
  48
  49         local_irq_save(flags);
  50
  51         /*
  52          * Notify the slaves that it's time to start
  53          */
  54         atomic_set(&count_reference, read_c0_count());
  55         atomic_set(&count_start_flag, 1);
  56         smp_wmb();
  57
  58         /* Count will be initialised to current timer for all CPU's */
  59         initcount = read_c0_count();
  60
  61         /*
  62          * We loop a few times to get a primed instruction cache,
  63          * then the last pass is more or less synchronised and
  64          * the master and slaves each set their cycle counters to a known
  65          * value all at once. This reduces the chance of having random offsets
  66          * between the processors, and guarantees that the maximum
  67          * delay between the cycle counters is never bigger than
  68          * the latency of information-passing (cachelines) between
  69          * two CPUs.
  70          */
  71
  72         nslaves = num_online_cpus()-1;
  73         for (i = 0; i < NR_LOOPS; i++) {
  74                 /* slaves loop on '!= ncpus' */
  75                 while (atomic_read(&count_count_start) != nslaves)
  76                         mb();
  77                 atomic_set(&count_count_stop, 0);
  78                 smp_wmb();
  79
  80                 /* this lets the slaves write their count register */
  81                 atomic_inc(&count_count_start);
  82
  83                 /*
  84                  * Everyone initialises count in the last loop:
  85                  */
  86                 if (i == NR_LOOPS-1)
  87                         write_c0_count(initcount);
  88
  89                 /*
  90                  * Wait for all slaves to leave the synchronization point:
  91                  */
  92                 while (atomic_read(&count_count_stop) != nslaves)
  93                         mb();
  94                 atomic_set(&count_count_start, 0);
  95                 smp_wmb();
  96                 atomic_inc(&count_count_stop);
  97         }
  98         /* Arrange for an interrupt in a short while */
  99         write_c0_compare(read_c0_count() + COUNTON);
 100
 101         local_irq_restore(flags);
 102
 103         /*
 104          * i386 code reported the skew here, but the
 105          * count registers were almost certainly out of sync
 106          * so no point in alarming people
 107          */
 108         printk("done.\n");
 109 }
 110
 111 void __cpuinit synchronise_count_slave(void)
 112 {
 113         int i;
 114         unsigned long flags;
 115         unsigned int initcount;
 116         int ncpus;
 117
 118 #ifdef CONFIG_MIPS_MT_SMTC
 119         /*
 120          * SMTC needs to synchronise per VPE, not per CPU
 121          * ignore for now
 122          */
 123         return;
 124 #endif
 125
 126         local_irq_save(flags);
 127
 128         /*
 129          * Not every cpu is online at the time this gets called,
 130          * so we first wait for the master to say everyone is ready
 131          */
 132
 133         while (!atomic_read(&count_start_flag))
 134                 mb();
 135
 136         /* Count will be initialised to next expire for all CPU's */
 137         initcount = atomic_read(&count_reference);
 138
 139         ncpus = num_online_cpus();
 140         for (i = 0; i < NR_LOOPS; i++) {
 141                 atomic_inc(&count_count_start);
 142                 while (atomic_read(&count_count_start) != ncpus)
 143                         mb();
 144
 145                 /*
 146                  * Everyone initialises count in the last loop:
 147                  */
 148                 if (i == NR_LOOPS-1)
 149                         write_c0_count(initcount);
 150
 151                 atomic_inc(&count_count_stop);
 152                 while (atomic_read(&count_count_stop) != ncpus)
 153                         mb();
 154         }
 155         /* Arrange for an interrupt in a short while */
 156         write_c0_compare(read_c0_count() + COUNTON);
 157
 158         local_irq_restore(flags);
 159 }
 160 #undef NR_LOOPS