Full support for Ginger Console
[linux-ginger.git] / arch / powerpc / include / asm / cell-regs.h
blobfdf64fd259508c94e8e4ab39635d7a4ef27aaa56
1 /*
2 * cbe_regs.h
4 * This file is intended to hold the various register definitions for CBE
5 * on-chip system devices (memory controller, IO controller, etc...)
7 * (C) Copyright IBM Corporation 2001,2006
9 * Authors: Maximino Aguilar (maguilar@us.ibm.com)
10 * David J. Erb (djerb@us.ibm.com)
12 * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
15 #ifndef CBE_REGS_H
16 #define CBE_REGS_H
18 #include <asm/cell-pmu.h>
22 * Some HID register definitions
26 /* CBE specific HID0 bits */
27 #define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul
28 #define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul
29 #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul
30 #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul
32 #define MAX_CBE 2
36 * Pervasive unit register definitions
40 union spe_reg {
41 u64 val;
42 u8 spe[8];
45 union ppe_spe_reg {
46 u64 val;
47 struct {
48 u32 ppe;
49 u32 spe;
54 struct cbe_pmd_regs {
55 /* Debug Bus Control */
56 u64 pad_0x0000; /* 0x0000 */
58 u64 group_control; /* 0x0008 */
60 u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */
62 u64 debug_bus_control; /* 0x00a8 */
64 u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */
66 u64 trace_aux_data; /* 0x0100 */
67 u64 trace_buffer_0_63; /* 0x0108 */
68 u64 trace_buffer_64_127; /* 0x0110 */
69 u64 trace_address; /* 0x0118 */
70 u64 ext_tr_timer; /* 0x0120 */
72 u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */
74 /* Performance Monitor */
75 u64 pm_status; /* 0x0400 */
76 u64 pm_control; /* 0x0408 */
77 u64 pm_interval; /* 0x0410 */
78 u64 pm_ctr[4]; /* 0x0418 */
79 u64 pm_start_stop; /* 0x0438 */
80 u64 pm07_control[8]; /* 0x0440 */
82 u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */
84 /* Thermal Sensor Registers */
85 union spe_reg ts_ctsr1; /* 0x0800 */
86 u64 ts_ctsr2; /* 0x0808 */
87 union spe_reg ts_mtsr1; /* 0x0810 */
88 u64 ts_mtsr2; /* 0x0818 */
89 union spe_reg ts_itr1; /* 0x0820 */
90 u64 ts_itr2; /* 0x0828 */
91 u64 ts_gitr; /* 0x0830 */
92 u64 ts_isr; /* 0x0838 */
93 u64 ts_imr; /* 0x0840 */
94 union spe_reg tm_cr1; /* 0x0848 */
95 u64 tm_cr2; /* 0x0850 */
96 u64 tm_simr; /* 0x0858 */
97 union ppe_spe_reg tm_tpr; /* 0x0860 */
98 union spe_reg tm_str1; /* 0x0868 */
99 u64 tm_str2; /* 0x0870 */
100 union ppe_spe_reg tm_tsr; /* 0x0878 */
102 /* Power Management */
103 u64 pmcr; /* 0x0880 */
104 #define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000
105 u64 pmsr; /* 0x0888 */
107 /* Time Base Register */
108 u64 tbr; /* 0x0890 */
110 u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */
112 /* Fault Isolation Registers */
113 u64 checkstop_fir; /* 0x0c00 */
114 u64 recoverable_fir; /* 0x0c08 */
115 u64 spec_att_mchk_fir; /* 0x0c10 */
116 u32 fir_mode_reg; /* 0x0c18 */
117 u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */
118 #define CBE_PMD_FIR_MODE_M8 0x00800
119 u64 fir_enable_mask; /* 0x0c20 */
121 u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */
122 u64 ras_esc_0; /* 0x0ca8 */
123 u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */
126 extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
127 extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
130 * PMU shadow registers
132 * Many of the registers in the performance monitoring unit are write-only,
133 * so we need to save a copy of what we write to those registers.
135 * The actual data counters are read/write. However, writing to the counters
136 * only takes effect if the PMU is enabled. Otherwise the value is stored in
137 * a hardware latch until the next time the PMU is enabled. So we save a copy
138 * of the counter values if we need to read them back while the PMU is
139 * disabled. The counter_value_in_latch field is a bitmap indicating which
140 * counters currently have a value waiting to be written.
143 struct cbe_pmd_shadow_regs {
144 u32 group_control;
145 u32 debug_bus_control;
146 u32 trace_address;
147 u32 ext_tr_timer;
148 u32 pm_status;
149 u32 pm_control;
150 u32 pm_interval;
151 u32 pm_start_stop;
152 u32 pm07_control[NR_CTRS];
154 u32 pm_ctr[NR_PHYS_CTRS];
155 u32 counter_value_in_latch;
158 extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
159 extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
163 * IIC unit register definitions
167 struct cbe_iic_pending_bits {
168 u32 data;
169 u8 flags;
170 u8 class;
171 u8 source;
172 u8 prio;
175 #define CBE_IIC_IRQ_VALID 0x80
176 #define CBE_IIC_IRQ_IPI 0x40
178 struct cbe_iic_thread_regs {
179 struct cbe_iic_pending_bits pending;
180 struct cbe_iic_pending_bits pending_destr;
181 u64 generate;
182 u64 prio;
185 struct cbe_iic_regs {
186 u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */
188 /* IIC interrupt registers */
189 struct cbe_iic_thread_regs thread[2]; /* 0x0400 */
191 u64 iic_ir; /* 0x0440 */
192 #define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12)
193 #define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
194 #define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
195 #define CBE_IIC_IR_IOC_0 0x0
196 #define CBE_IIC_IR_IOC_1S 0xb
197 #define CBE_IIC_IR_PT_0 0xe
198 #define CBE_IIC_IR_PT_1 0xf
200 u64 iic_is; /* 0x0448 */
201 #define CBE_IIC_IS_PMI 0x2
203 u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */
205 /* IOC FIR */
206 u64 ioc_fir_reset; /* 0x0500 */
207 u64 ioc_fir_set; /* 0x0508 */
208 u64 ioc_checkstop_enable; /* 0x0510 */
209 u64 ioc_fir_error_mask; /* 0x0518 */
210 u64 ioc_syserr_enable; /* 0x0520 */
211 u64 ioc_fir; /* 0x0528 */
213 u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */
216 extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
217 extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
220 struct cbe_mic_tm_regs {
221 u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */
223 u64 mic_ctl_cnfg2; /* 0x0040 */
224 #define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL
225 #define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL
226 #define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL
227 #define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL
229 u64 pad_0x0048; /* 0x0048 */
231 u64 mic_aux_trc_base; /* 0x0050 */
232 u64 mic_aux_trc_max_addr; /* 0x0058 */
233 u64 mic_aux_trc_cur_addr; /* 0x0060 */
234 u64 mic_aux_trc_grf_addr; /* 0x0068 */
235 u64 mic_aux_trc_grf_data; /* 0x0070 */
237 u64 pad_0x0078; /* 0x0078 */
239 u64 mic_ctl_cnfg_0; /* 0x0080 */
240 #define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL
242 u64 pad_0x0088; /* 0x0088 */
244 u64 slow_fast_timer_0; /* 0x0090 */
245 u64 slow_next_timer_0; /* 0x0098 */
247 u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */
248 u64 mic_df_ecc_address_0; /* 0x00f8 */
250 u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */
251 u64 mic_df_ecc_address_1; /* 0x01b8 */
253 u64 mic_ctl_cnfg_1; /* 0x01c0 */
254 #define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL
256 u64 pad_0x01c8; /* 0x01c8 */
258 u64 slow_fast_timer_1; /* 0x01d0 */
259 u64 slow_next_timer_1; /* 0x01d8 */
261 u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */
262 u64 mic_exc; /* 0x0208 */
263 #define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL
264 #define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL
266 u64 mic_mnt_cfg; /* 0x0210 */
267 #define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL
268 #define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL
270 u64 mic_df_config; /* 0x0218 */
271 #define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL
272 #define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL
273 #define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL
274 #define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL
276 u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */
277 u64 mic_fir; /* 0x0230 */
278 #define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL
279 #define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL
280 #define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL
281 #define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL
282 #define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL
283 #define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL
284 #define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL
285 #define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL
286 #define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL
287 #define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL
288 #define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL
289 #define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL
290 #define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL
291 #define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL
292 #define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL
293 #define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL
294 #define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL
295 #define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL
296 #define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL
297 #define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL
298 u64 mic_fir_debug; /* 0x0238 */
300 u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */
303 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
304 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
307 /* Cell page table entries */
308 #define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */
309 #define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */
310 #define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */
311 #define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */
312 #define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */
313 #define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */
314 #define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */
315 #define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */
317 /* some utility functions to deal with SMT */
318 extern u32 cbe_get_hw_thread_id(int cpu);
319 extern u32 cbe_cpu_to_node(int cpu);
320 extern u32 cbe_node_to_cpu(int node);
322 /* Init this module early */
323 extern void cbe_regs_init(void);
326 #endif /* CBE_REGS_H */