arch/powerpc/oprofile/op_model_power4.c

   1 /*
   2  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
   3  * Added mmcra[slot] support:
   4  * Copyright (C) 2006-2007 Will Schmidt <willschm@us.ibm.com>, IBM
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #include <linux/oprofile.h>
  13 #include <linux/init.h>
  14 #include <linux/smp.h>
  15 #include <asm/firmware.h>
  16 #include <asm/ptrace.h>
  17 #include <asm/system.h>
  18 #include <asm/processor.h>
  19 #include <asm/cputable.h>
  20 #include <asm/rtas.h>
  21 #include <asm/oprofile_impl.h>
  22 #include <asm/reg.h>
  23
  24 #define dbg(args...)
  25
  26 static unsigned long reset_value[OP_MAX_COUNTER];
  27
  28 static int oprofile_running;
  29 static int use_slot_nums;
  30
  31 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
  32 static u32 mmcr0_val;
  33 static u64 mmcr1_val;
  34 static u64 mmcra_val;
  35
  36 static int power4_reg_setup(struct op_counter_config *ctr,
  37                              struct op_system_config *sys,
  38                              int num_ctrs)
  39 {
  40         int i;
  41
  42         /*
  43          * The performance counter event settings are given in the mmcr0,
  44          * mmcr1 and mmcra values passed from the user in the
  45          * op_system_config structure (sys variable).
  46          */
  47         mmcr0_val = sys->mmcr0;
  48         mmcr1_val = sys->mmcr1;
  49         mmcra_val = sys->mmcra;
  50
  51         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
  52                 reset_value[i] = 0x80000000UL - ctr[i].count;
  53
  54         /* setup user and kernel profiling */
  55         if (sys->enable_kernel)
  56                 mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
  57         else
  58                 mmcr0_val |= MMCR0_KERNEL_DISABLE;
  59
  60         if (sys->enable_user)
  61                 mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
  62         else
  63                 mmcr0_val |= MMCR0_PROBLEM_DISABLE;
  64
  65         if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
  66             __is_processor(PV_970) || __is_processor(PV_970FX) ||
  67             __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
  68             __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
  69                 use_slot_nums = 1;
  70
  71         return 0;
  72 }
  73
  74 extern void ppc_enable_pmcs(void);
  75
  76 /*
  77  * Older CPUs require the MMCRA sample bit to be always set, but newer
  78  * CPUs only want it set for some groups. Eventually we will remove all
  79  * knowledge of this bit in the kernel, oprofile userspace should be
  80  * setting it when required.
  81  *
  82  * In order to keep current installations working we force the bit for
  83  * those older CPUs. Once everyone has updated their oprofile userspace we
  84  * can remove this hack.
  85  */
  86 static inline int mmcra_must_set_sample(void)
  87 {
  88         if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
  89             __is_processor(PV_970) || __is_processor(PV_970FX) ||
  90             __is_processor(PV_970MP) || __is_processor(PV_970GX))
  91                 return 1;
  92
  93         return 0;
  94 }
  95
  96 static int power4_cpu_setup(struct op_counter_config *ctr)
  97 {
  98         unsigned int mmcr0 = mmcr0_val;
  99         unsigned long mmcra = mmcra_val;
 100
 101         ppc_enable_pmcs();
 102
 103         /* set the freeze bit */
 104         mmcr0 |= MMCR0_FC;
 105         mtspr(SPRN_MMCR0, mmcr0);
 106
 107         mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
 108         mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
 109         mtspr(SPRN_MMCR0, mmcr0);
 110
 111         mtspr(SPRN_MMCR1, mmcr1_val);
 112
 113         if (mmcra_must_set_sample())
 114                 mmcra |= MMCRA_SAMPLE_ENABLE;
 115         mtspr(SPRN_MMCRA, mmcra);
 116
 117         dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
 118             mfspr(SPRN_MMCR0));
 119         dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
 120             mfspr(SPRN_MMCR1));
 121         dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
 122             mfspr(SPRN_MMCRA));
 123
 124         return 0;
 125 }
 126
 127 static int power4_start(struct op_counter_config *ctr)
 128 {
 129         int i;
 130         unsigned int mmcr0;
 131
 132         /* set the PMM bit (see comment below) */
 133         mtmsrd(mfmsr() | MSR_PMM);
 134
 135         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 136                 if (ctr[i].enabled) {
 137                         classic_ctr_write(i, reset_value[i]);
 138                 } else {
 139                         classic_ctr_write(i, 0);
 140                 }
 141         }
 142
 143         mmcr0 = mfspr(SPRN_MMCR0);
 144
 145         /*
 146          * We must clear the PMAO bit on some (GQ) chips. Just do it
 147          * all the time
 148          */
 149         mmcr0 &= ~MMCR0_PMAO;
 150
 151         /*
 152          * now clear the freeze bit, counting will not start until we
 153          * rfid from this excetion, because only at that point will
 154          * the PMM bit be cleared
 155          */
 156         mmcr0 &= ~MMCR0_FC;
 157         mtspr(SPRN_MMCR0, mmcr0);
 158
 159         oprofile_running = 1;
 160
 161         dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
 162         return 0;
 163 }
 164
 165 static void power4_stop(void)
 166 {
 167         unsigned int mmcr0;
 168
 169         /* freeze counters */
 170         mmcr0 = mfspr(SPRN_MMCR0);
 171         mmcr0 |= MMCR0_FC;
 172         mtspr(SPRN_MMCR0, mmcr0);
 173
 174         oprofile_running = 0;
 175
 176         dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
 177
 178         mb();
 179 }
 180
 181 /* Fake functions used by canonicalize_pc */
 182 static void __used hypervisor_bucket(void)
 183 {
 184 }
 185
 186 static void __used rtas_bucket(void)
 187 {
 188 }
 189
 190 static void __used kernel_unknown_bucket(void)
 191 {
 192 }
 193
 194 /*
 195  * On GQ and newer the MMCRA stores the HV and PR bits at the time
 196  * the SIAR was sampled. We use that to work out if the SIAR was sampled in
 197  * the hypervisor, our exception vectors or RTAS.
 198  * If the MMCRA_SAMPLE_ENABLE bit is set, we can use the MMCRA[slot] bits
 199  * to more accurately identify the address of the sampled instruction. The
 200  * mmcra[slot] bits represent the slot number of a sampled instruction
 201  * within an instruction group.  The slot will contain a value between 1
 202  * and 5 if MMCRA_SAMPLE_ENABLE is set, otherwise 0.
 203  */
 204 static unsigned long get_pc(struct pt_regs *regs)
 205 {
 206         unsigned long pc = mfspr(SPRN_SIAR);
 207         unsigned long mmcra;
 208         unsigned long slot;
 209
 210         /* Cant do much about it */
 211         if (!cur_cpu_spec->oprofile_mmcra_sihv)
 212                 return pc;
 213
 214         mmcra = mfspr(SPRN_MMCRA);
 215
 216         if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
 217                 slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
 218                 if (slot > 1)
 219                         pc += 4 * (slot - 1);
 220         }
 221
 222         /* Were we in the hypervisor? */
 223         if (firmware_has_feature(FW_FEATURE_LPAR) &&
 224             (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
 225                 /* function descriptor madness */
 226                 return *((unsigned long *)hypervisor_bucket);
 227
 228         /* We were in userspace, nothing to do */
 229         if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
 230                 return pc;
 231
 232 #ifdef CONFIG_PPC_RTAS
 233         /* Were we in RTAS? */
 234         if (pc >= rtas.base && pc < (rtas.base + rtas.size))
 235                 /* function descriptor madness */
 236                 return *((unsigned long *)rtas_bucket);
 237 #endif
 238
 239         /* Were we in our exception vectors or SLB real mode miss handler? */
 240         if (pc < 0x1000000UL)
 241                 return (unsigned long)__va(pc);
 242
 243         /* Not sure where we were */
 244         if (!is_kernel_addr(pc))
 245                 /* function descriptor madness */
 246                 return *((unsigned long *)kernel_unknown_bucket);
 247
 248         return pc;
 249 }
 250
 251 static int get_kernel(unsigned long pc, unsigned long mmcra)
 252 {
 253         int is_kernel;
 254
 255         if (!cur_cpu_spec->oprofile_mmcra_sihv) {
 256                 is_kernel = is_kernel_addr(pc);
 257         } else {
 258                 is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
 259         }
 260
 261         return is_kernel;
 262 }
 263
 264 static void power4_handle_interrupt(struct pt_regs *regs,
 265                                     struct op_counter_config *ctr)
 266 {
 267         unsigned long pc;
 268         int is_kernel;
 269         int val;
 270         int i;
 271         unsigned int mmcr0;
 272         unsigned long mmcra;
 273
 274         mmcra = mfspr(SPRN_MMCRA);
 275
 276         pc = get_pc(regs);
 277         is_kernel = get_kernel(pc, mmcra);
 278
 279         /* set the PMM bit (see comment below) */
 280         mtmsrd(mfmsr() | MSR_PMM);
 281
 282         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 283                 val = classic_ctr_read(i);
 284                 if (val < 0) {
 285                         if (oprofile_running && ctr[i].enabled) {
 286                                 oprofile_add_ext_sample(pc, regs, i, is_kernel);
 287                                 classic_ctr_write(i, reset_value[i]);
 288                         } else {
 289                                 classic_ctr_write(i, 0);
 290                         }
 291                 }
 292         }
 293
 294         mmcr0 = mfspr(SPRN_MMCR0);
 295
 296         /* reset the perfmon trigger */
 297         mmcr0 |= MMCR0_PMXE;
 298
 299         /*
 300          * We must clear the PMAO bit on some (GQ) chips. Just do it
 301          * all the time
 302          */
 303         mmcr0 &= ~MMCR0_PMAO;
 304
 305         /* Clear the appropriate bits in the MMCRA */
 306         mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
 307         mtspr(SPRN_MMCRA, mmcra);
 308
 309         /*
 310          * now clear the freeze bit, counting will not start until we
 311          * rfid from this exception, because only at that point will
 312          * the PMM bit be cleared
 313          */
 314         mmcr0 &= ~MMCR0_FC;
 315         mtspr(SPRN_MMCR0, mmcr0);
 316 }
 317
 318 struct op_powerpc_model op_model_power4 = {
 319         .reg_setup              = power4_reg_setup,
 320         .cpu_setup              = power4_cpu_setup,
 321         .start                  = power4_start,
 322         .stop                   = power4_stop,
 323         .handle_interrupt       = power4_handle_interrupt,
 324 };