arch/powerpc/platforms/86xx/gef_sbc610.c

   1 /*
   2  * GE Fanuc SBC610 board support
   3  *
   4  * Author: Martyn Welch <martyn.welch@gefanuc.com>
   5  *
   6  * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  *
  13  * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
  14  * Copyright 2006 Freescale Semiconductor Inc.
  15  *
  16  * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/pci.h>
  22 #include <linux/kdev_t.h>
  23 #include <linux/delay.h>
  24 #include <linux/seq_file.h>
  25 #include <linux/of_platform.h>
  26
  27 #include <asm/system.h>
  28 #include <asm/time.h>
  29 #include <asm/machdep.h>
  30 #include <asm/pci-bridge.h>
  31 #include <asm/prom.h>
  32 #include <mm/mmu_decl.h>
  33 #include <asm/udbg.h>
  34
  35 #include <asm/mpic.h>
  36
  37 #include <sysdev/fsl_pci.h>
  38 #include <sysdev/fsl_soc.h>
  39
  40 #include "mpc86xx.h"
  41 #include "gef_pic.h"
  42
  43 #undef DEBUG
  44
  45 #ifdef DEBUG
  46 #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
  47 #else
  48 #define DBG (fmt...) do { } while (0)
  49 #endif
  50
  51 void __iomem *sbc610_regs;
  52
  53 static void __init gef_sbc610_init_irq(void)
  54 {
  55         struct device_node *cascade_node = NULL;
  56
  57         mpc86xx_init_irq();
  58
  59         /*
  60          * There is a simple interrupt handler in the main FPGA, this needs
  61          * to be cascaded into the MPIC
  62          */
  63         cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
  64         if (!cascade_node) {
  65                 printk(KERN_WARNING "SBC610: No FPGA PIC\n");
  66                 return;
  67         }
  68
  69         gef_pic_init(cascade_node);
  70         of_node_put(cascade_node);
  71 }
  72
  73 static void __init gef_sbc610_setup_arch(void)
  74 {
  75         struct device_node *regs;
  76 #ifdef CONFIG_PCI
  77         struct device_node *np;
  78
  79         for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
  80                 fsl_add_bridge(np, 1);
  81         }
  82 #endif
  83
  84         printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
  85
  86 #ifdef CONFIG_SMP
  87         mpc86xx_smp_init();
  88 #endif
  89
  90         /* Remap basic board registers */
  91         regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
  92         if (regs) {
  93                 sbc610_regs = of_iomap(regs, 0);
  94                 if (sbc610_regs == NULL)
  95                         printk(KERN_WARNING "Unable to map board registers\n");
  96                 of_node_put(regs);
  97         }
  98 }
  99
 100 /* Return the PCB revision */
 101 static unsigned int gef_sbc610_get_pcb_rev(void)
 102 {
 103         unsigned int reg;
 104
 105         reg = ioread32(sbc610_regs);
 106         return (reg >> 8) & 0xff;
 107 }
 108
 109 /* Return the board (software) revision */
 110 static unsigned int gef_sbc610_get_board_rev(void)
 111 {
 112         unsigned int reg;
 113
 114         reg = ioread32(sbc610_regs);
 115         return (reg >> 16) & 0xff;
 116 }
 117
 118 /* Return the FPGA revision */
 119 static unsigned int gef_sbc610_get_fpga_rev(void)
 120 {
 121         unsigned int reg;
 122
 123         reg = ioread32(sbc610_regs);
 124         return (reg >> 24) & 0xf;
 125 }
 126
 127 static void gef_sbc610_show_cpuinfo(struct seq_file *m)
 128 {
 129         uint svid = mfspr(SPRN_SVR);
 130
 131         seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
 132
 133         seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
 134                 ('A' + gef_sbc610_get_board_rev() - 1));
 135         seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
 136
 137         seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 138 }
 139
 140 static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
 141 {
 142         unsigned int val;
 143
 144         /* Do not do the fixup on other platforms! */
 145         if (!machine_is(gef_sbc610))
 146                 return;
 147
 148         printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
 149
 150         /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
 151         pci_read_config_dword(pdev, 0xe0, &val);
 152         pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
 153
 154         /* System clock is 48-MHz Oscillator and EHCI Enabled. */
 155         pci_write_config_dword(pdev, 0xe4, 1 << 5);
 156 }
 157 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
 158         gef_sbc610_nec_fixup);
 159
 160 /*
 161  * Called very early, device-tree isn't unflattened
 162  *
 163  * This function is called to determine whether the BSP is compatible with the
 164  * supplied device-tree, which is assumed to be the correct one for the actual
 165  * board. It is expected thati, in the future, a kernel may support multiple
 166  * boards.
 167  */
 168 static int __init gef_sbc610_probe(void)
 169 {
 170         unsigned long root = of_get_flat_dt_root();
 171
 172         if (of_flat_dt_is_compatible(root, "gef,sbc610"))
 173                 return 1;
 174
 175         return 0;
 176 }
 177
 178 static long __init mpc86xx_time_init(void)
 179 {
 180         unsigned int temp;
 181
 182         /* Set the time base to zero */
 183         mtspr(SPRN_TBWL, 0);
 184         mtspr(SPRN_TBWU, 0);
 185
 186         temp = mfspr(SPRN_HID0);
 187         temp |= HID0_TBEN;
 188         mtspr(SPRN_HID0, temp);
 189         asm volatile("isync");
 190
 191         return 0;
 192 }
 193
 194 static __initdata struct of_device_id of_bus_ids[] = {
 195         { .compatible = "simple-bus", },
 196         { .compatible = "gianfar", },
 197         {},
 198 };
 199
 200 static int __init declare_of_platform_devices(void)
 201 {
 202         printk(KERN_DEBUG "Probe platform devices\n");
 203         of_platform_bus_probe(NULL, of_bus_ids, NULL);
 204
 205         return 0;
 206 }
 207 machine_device_initcall(gef_sbc610, declare_of_platform_devices);
 208
 209 define_machine(gef_sbc610) {
 210         .name                   = "GE Fanuc SBC610",
 211         .probe                  = gef_sbc610_probe,
 212         .setup_arch             = gef_sbc610_setup_arch,
 213         .init_IRQ               = gef_sbc610_init_irq,
 214         .show_cpuinfo           = gef_sbc610_show_cpuinfo,
 215         .get_irq                = mpic_get_irq,
 216         .restart                = fsl_rstcr_restart,
 217         .time_init              = mpc86xx_time_init,
 218         .calibrate_decr         = generic_calibrate_decr,
 219         .progress               = udbg_progress,
 220 #ifdef CONFIG_PCI
 221         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 222 #endif
 223 };