Full support for Ginger Console
[linux-ginger.git] / arch / x86 / kernel / vsyscall_64.c
blob8cb4974ff5990c19267077d473caeeb504fe5bae
1 /*
2 * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
3 * Copyright 2003 Andi Kleen, SuSE Labs.
5 * Thanks to hpa@transmeta.com for some useful hint.
6 * Special thanks to Ingo Molnar for his early experience with
7 * a different vsyscall implementation for Linux/IA32 and for the name.
9 * vsyscall 1 is located at -10Mbyte, vsyscall 2 is located
10 * at virtual address -10Mbyte+1024bytes etc... There are at max 4
11 * vsyscalls. One vsyscall can reserve more than 1 slot to avoid
12 * jumping out of line if necessary. We cannot add more with this
13 * mechanism because older kernels won't return -ENOSYS.
14 * If we want more than four we need a vDSO.
16 * Note: the concept clashes with user mode linux. If you use UML and
17 * want per guest time just set the kernel.vsyscall64 sysctl to 0.
20 /* Disable profiling for userspace code: */
21 #define DISABLE_BRANCH_PROFILING
23 #include <linux/time.h>
24 #include <linux/init.h>
25 #include <linux/kernel.h>
26 #include <linux/timer.h>
27 #include <linux/seqlock.h>
28 #include <linux/jiffies.h>
29 #include <linux/sysctl.h>
30 #include <linux/clocksource.h>
31 #include <linux/getcpu.h>
32 #include <linux/cpu.h>
33 #include <linux/smp.h>
34 #include <linux/notifier.h>
36 #include <asm/vsyscall.h>
37 #include <asm/pgtable.h>
38 #include <asm/page.h>
39 #include <asm/unistd.h>
40 #include <asm/fixmap.h>
41 #include <asm/errno.h>
42 #include <asm/io.h>
43 #include <asm/segment.h>
44 #include <asm/desc.h>
45 #include <asm/topology.h>
46 #include <asm/vgtod.h>
48 #define __vsyscall(nr) \
49 __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace
50 #define __syscall_clobber "r11","cx","memory"
53 * vsyscall_gtod_data contains data that is :
54 * - readonly from vsyscalls
55 * - written by timer interrupt or systcl (/proc/sys/kernel/vsyscall64)
56 * Try to keep this structure as small as possible to avoid cache line ping pongs
58 int __vgetcpu_mode __section_vgetcpu_mode;
60 struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data =
62 .lock = SEQLOCK_UNLOCKED,
63 .sysctl_enabled = 1,
66 void update_vsyscall_tz(void)
68 unsigned long flags;
70 write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
71 /* sys_tz has changed */
72 vsyscall_gtod_data.sys_tz = sys_tz;
73 write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
76 void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
78 unsigned long flags;
80 write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
81 /* copy vsyscall data */
82 vsyscall_gtod_data.clock.vread = clock->vread;
83 vsyscall_gtod_data.clock.cycle_last = clock->cycle_last;
84 vsyscall_gtod_data.clock.mask = clock->mask;
85 vsyscall_gtod_data.clock.mult = clock->mult;
86 vsyscall_gtod_data.clock.shift = clock->shift;
87 vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
88 vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
89 vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
90 vsyscall_gtod_data.wall_time_coarse = __current_kernel_time();
91 write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
94 /* RED-PEN may want to readd seq locking, but then the variable should be
95 * write-once.
97 static __always_inline void do_get_tz(struct timezone * tz)
99 *tz = __vsyscall_gtod_data.sys_tz;
102 static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
104 int ret;
105 asm volatile("syscall"
106 : "=a" (ret)
107 : "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
108 : __syscall_clobber );
109 return ret;
112 static __always_inline long time_syscall(long *t)
114 long secs;
115 asm volatile("syscall"
116 : "=a" (secs)
117 : "0" (__NR_time),"D" (t) : __syscall_clobber);
118 return secs;
121 static __always_inline void do_vgettimeofday(struct timeval * tv)
123 cycle_t now, base, mask, cycle_delta;
124 unsigned seq;
125 unsigned long mult, shift, nsec;
126 cycle_t (*vread)(void);
127 do {
128 seq = read_seqbegin(&__vsyscall_gtod_data.lock);
130 vread = __vsyscall_gtod_data.clock.vread;
131 if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) {
132 gettimeofday(tv,NULL);
133 return;
136 now = vread();
137 base = __vsyscall_gtod_data.clock.cycle_last;
138 mask = __vsyscall_gtod_data.clock.mask;
139 mult = __vsyscall_gtod_data.clock.mult;
140 shift = __vsyscall_gtod_data.clock.shift;
142 tv->tv_sec = __vsyscall_gtod_data.wall_time_sec;
143 nsec = __vsyscall_gtod_data.wall_time_nsec;
144 } while (read_seqretry(&__vsyscall_gtod_data.lock, seq));
146 /* calculate interval: */
147 cycle_delta = (now - base) & mask;
148 /* convert to nsecs: */
149 nsec += (cycle_delta * mult) >> shift;
151 while (nsec >= NSEC_PER_SEC) {
152 tv->tv_sec += 1;
153 nsec -= NSEC_PER_SEC;
155 tv->tv_usec = nsec / NSEC_PER_USEC;
158 int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
160 if (tv)
161 do_vgettimeofday(tv);
162 if (tz)
163 do_get_tz(tz);
164 return 0;
167 /* This will break when the xtime seconds get inaccurate, but that is
168 * unlikely */
169 time_t __vsyscall(1) vtime(time_t *t)
171 struct timeval tv;
172 time_t result;
173 if (unlikely(!__vsyscall_gtod_data.sysctl_enabled))
174 return time_syscall(t);
176 vgettimeofday(&tv, NULL);
177 result = tv.tv_sec;
178 if (t)
179 *t = result;
180 return result;
183 /* Fast way to get current CPU and node.
184 This helps to do per node and per CPU caches in user space.
185 The result is not guaranteed without CPU affinity, but usually
186 works out because the scheduler tries to keep a thread on the same
187 CPU.
189 tcache must point to a two element sized long array.
190 All arguments can be NULL. */
191 long __vsyscall(2)
192 vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
194 unsigned int p;
195 unsigned long j = 0;
197 /* Fast cache - only recompute value once per jiffies and avoid
198 relatively costly rdtscp/cpuid otherwise.
199 This works because the scheduler usually keeps the process
200 on the same CPU and this syscall doesn't guarantee its
201 results anyways.
202 We do this here because otherwise user space would do it on
203 its own in a likely inferior way (no access to jiffies).
204 If you don't like it pass NULL. */
205 if (tcache && tcache->blob[0] == (j = __jiffies)) {
206 p = tcache->blob[1];
207 } else if (__vgetcpu_mode == VGETCPU_RDTSCP) {
208 /* Load per CPU data from RDTSCP */
209 native_read_tscp(&p);
210 } else {
211 /* Load per CPU data from GDT */
212 asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
214 if (tcache) {
215 tcache->blob[0] = j;
216 tcache->blob[1] = p;
218 if (cpu)
219 *cpu = p & 0xfff;
220 if (node)
221 *node = p >> 12;
222 return 0;
225 static long __vsyscall(3) venosys_1(void)
227 return -ENOSYS;
230 #ifdef CONFIG_SYSCTL
231 static ctl_table kernel_table2[] = {
232 { .procname = "vsyscall64",
233 .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
234 .mode = 0644,
235 .proc_handler = proc_dointvec },
239 static ctl_table kernel_root_table2[] = {
240 { .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555,
241 .child = kernel_table2 },
244 #endif
246 /* Assume __initcall executes before all user space. Hopefully kmod
247 doesn't violate that. We'll find out if it does. */
248 static void __cpuinit vsyscall_set_cpu(int cpu)
250 unsigned long d;
251 unsigned long node = 0;
252 #ifdef CONFIG_NUMA
253 node = cpu_to_node(cpu);
254 #endif
255 if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP))
256 write_rdtscp_aux((node << 12) | cpu);
258 /* Store cpu number in limit so that it can be loaded quickly
259 in user space in vgetcpu.
260 12 bits for the CPU and 8 bits for the node. */
261 d = 0x0f40000000000ULL;
262 d |= cpu;
263 d |= (node & 0xf) << 12;
264 d |= (node >> 4) << 48;
265 write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S);
268 static void __cpuinit cpu_vsyscall_init(void *arg)
270 /* preemption should be already off */
271 vsyscall_set_cpu(raw_smp_processor_id());
274 static int __cpuinit
275 cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
277 long cpu = (long)arg;
278 if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
279 smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1);
280 return NOTIFY_DONE;
283 void __init map_vsyscall(void)
285 extern char __vsyscall_0;
286 unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0);
288 /* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */
289 __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL);
292 static int __init vsyscall_init(void)
294 BUG_ON(((unsigned long) &vgettimeofday !=
295 VSYSCALL_ADDR(__NR_vgettimeofday)));
296 BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
297 BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
298 BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu));
299 #ifdef CONFIG_SYSCTL
300 register_sysctl_table(kernel_root_table2);
301 #endif
302 on_each_cpu(cpu_vsyscall_init, NULL, 1);
303 hotcpu_notifier(cpu_vsyscall_notifier, 0);
304 return 0;
307 __initcall(vsyscall_init);