Full support for Ginger Console

[linux-ginger.git] / drivers / acpi / sleep.c

/*
 * sleep.c - ACPI sleep support.
 *
 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
 * Copyright (c) 2000-2003 Patrick Mochel
 * Copyright (c) 2003 Open Source Development Lab
 *
 * This file is released under the GPLv2.
 *
 */

#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <linux/reboot.h>

#include <asm/io.h>

#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>

#include "internal.h"
#include "sleep.h"

u8 sleep_states[ACPI_S_STATE_COUNT];

static void acpi_sleep_tts_switch(u32 acpi_state)
{
        union acpi_object in_arg = { ACPI_TYPE_INTEGER };
        struct acpi_object_list arg_list = { 1, &in_arg };
        acpi_status status = AE_OK;

        in_arg.integer.value = acpi_state;
        status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
        if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
                /*
                 * OS can't evaluate the _TTS object correctly. Some warning
                 * message will be printed. But it won't break anything.
                 */
                printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
        }
}

static int tts_notify_reboot(struct notifier_block *this,
                        unsigned long code, void *x)
{
        acpi_sleep_tts_switch(ACPI_STATE_S5);
        return NOTIFY_DONE;
}

static struct notifier_block tts_notifier = {
        .notifier_call  = tts_notify_reboot,
        .next           = NULL,
        .priority       = 0,
};

static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
        /* do we have a wakeup address for S2 and S3? */
        if (acpi_state == ACPI_STATE_S3) {
                if (!acpi_wakeup_address) {
                        return -EFAULT;
                }
                acpi_set_firmware_waking_vector(
                                (acpi_physical_address)acpi_wakeup_address);

        }
        ACPI_FLUSH_CPU_CACHE();
        acpi_enable_wakeup_device_prep(acpi_state);
#endif
        printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
                acpi_state);
        acpi_enter_sleep_state_prep(acpi_state);
        return 0;
}

#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 * user to request that behavior by using the 'acpi_old_suspend_ordering'
 * kernel command line option that causes the following variable to be set.
 */
static bool old_suspend_ordering;

void __init acpi_old_suspend_ordering(void)
{
        old_suspend_ordering = true;
}

/**
 *      acpi_pm_disable_gpes - Disable the GPEs.
 */
static int acpi_pm_disable_gpes(void)
{
        acpi_disable_all_gpes();
        return 0;
}

/**
 *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 *
 *      If necessary, set the firmware waking vector and do arch-specific
 *      nastiness to get the wakeup code to the waking vector.
 */
static int __acpi_pm_prepare(void)
{
        int error = acpi_sleep_prepare(acpi_target_sleep_state);

        if (error)
                acpi_target_sleep_state = ACPI_STATE_S0;
        return error;
}

/**
 *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 *              state and disable the GPEs.
 */
static int acpi_pm_prepare(void)
{
        int error = __acpi_pm_prepare();

        if (!error)
                acpi_disable_all_gpes();
        return error;
}

/**
 *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 *
 *      This is called after we wake back up (or if entering the sleep state
 *      failed).
 */
static void acpi_pm_finish(void)
{
        u32 acpi_state = acpi_target_sleep_state;

        if (acpi_state == ACPI_STATE_S0)
                return;

        printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
                acpi_state);
        acpi_disable_wakeup_device(acpi_state);
        acpi_leave_sleep_state(acpi_state);

        /* reset firmware waking vector */
        acpi_set_firmware_waking_vector((acpi_physical_address) 0);

        acpi_target_sleep_state = ACPI_STATE_S0;
}

/**
 *      acpi_pm_end - Finish up suspend sequence.
 */
static void acpi_pm_end(void)
{
        /*
         * This is necessary in case acpi_pm_finish() is not called during a
         * failing transition to a sleep state.
         */
        acpi_target_sleep_state = ACPI_STATE_S0;
        acpi_sleep_tts_switch(acpi_target_sleep_state);
}
#else /* !CONFIG_ACPI_SLEEP */
#define acpi_target_sleep_state ACPI_STATE_S0
#endif /* CONFIG_ACPI_SLEEP */

#ifdef CONFIG_SUSPEND
/*
 * According to the ACPI specification the BIOS should make sure that ACPI is
 * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
 * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
 * on such systems during resume.  Unfortunately that doesn't help in
 * particularly pathological cases in which SCI_EN has to be set directly on
 * resume, although the specification states very clearly that this flag is
 * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
 * cases.
 */
static bool set_sci_en_on_resume;

extern void do_suspend_lowlevel(void);

static u32 acpi_suspend_states[] = {
        [PM_SUSPEND_ON] = ACPI_STATE_S0,
        [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
        [PM_SUSPEND_MEM] = ACPI_STATE_S3,
        [PM_SUSPEND_MAX] = ACPI_STATE_S5
};

/**
 *      acpi_suspend_begin - Set the target system sleep state to the state
 *              associated with given @pm_state, if supported.
 */
static int acpi_suspend_begin(suspend_state_t pm_state)
{
        u32 acpi_state = acpi_suspend_states[pm_state];
        int error = 0;

        if (sleep_states[acpi_state]) {
                acpi_target_sleep_state = acpi_state;
                acpi_sleep_tts_switch(acpi_target_sleep_state);
        } else {
                printk(KERN_ERR "ACPI does not support this state: %d\n",
                        pm_state);
                error = -ENOSYS;
        }
        return error;
}

/**
 *      acpi_suspend_enter - Actually enter a sleep state.
 *      @pm_state: ignored
 *
 *      Flush caches and go to sleep. For STR we have to call arch-specific
 *      assembly, which in turn call acpi_enter_sleep_state().
 *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 */
static int acpi_suspend_enter(suspend_state_t pm_state)
{
        acpi_status status = AE_OK;
        unsigned long flags = 0;
        u32 acpi_state = acpi_target_sleep_state;

        ACPI_FLUSH_CPU_CACHE();

        /* Do arch specific saving of state. */
        if (acpi_state == ACPI_STATE_S3) {
                int error = acpi_save_state_mem();

                if (error)
                        return error;
        }

        local_irq_save(flags);
        acpi_enable_wakeup_device(acpi_state);
        switch (acpi_state) {
        case ACPI_STATE_S1:
                barrier();
                status = acpi_enter_sleep_state(acpi_state);
                break;

        case ACPI_STATE_S3:
                do_suspend_lowlevel();
                break;
        }

        /* If ACPI is not enabled by the BIOS, we need to enable it here. */
        if (set_sci_en_on_resume)
                acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
        else
                acpi_enable();

        /* Reprogram control registers and execute _BFS */
        acpi_leave_sleep_state_prep(acpi_state);

        /* ACPI 3.0 specs (P62) says that it's the responsibility
         * of the OSPM to clear the status bit [ implying that the
         * POWER_BUTTON event should not reach userspace ]
         */
        if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
                acpi_clear_event(ACPI_EVENT_POWER_BUTTON);

        /*
         * Disable and clear GPE status before interrupt is enabled. Some GPEs
         * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
         * acpi_leave_sleep_state will reenable specific GPEs later
         */
        acpi_disable_all_gpes();

        local_irq_restore(flags);
        printk(KERN_DEBUG "Back to C!\n");

        /* restore processor state */
        if (acpi_state == ACPI_STATE_S3)
                acpi_restore_state_mem();

        return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}

static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
        u32 acpi_state;

        switch (pm_state) {
        case PM_SUSPEND_ON:
        case PM_SUSPEND_STANDBY:
        case PM_SUSPEND_MEM:
                acpi_state = acpi_suspend_states[pm_state];

                return sleep_states[acpi_state];
        default:
                return 0;
        }
}

static struct platform_suspend_ops acpi_suspend_ops = {
        .valid = acpi_suspend_state_valid,
        .begin = acpi_suspend_begin,
        .prepare_late = acpi_pm_prepare,
        .enter = acpi_suspend_enter,
        .wake = acpi_pm_finish,
        .end = acpi_pm_end,
};

/**
 *      acpi_suspend_begin_old - Set the target system sleep state to the
 *              state associated with given @pm_state, if supported, and
 *              execute the _PTS control method.  This function is used if the
 *              pre-ACPI 2.0 suspend ordering has been requested.
 */
static int acpi_suspend_begin_old(suspend_state_t pm_state)
{
        int error = acpi_suspend_begin(pm_state);

        if (!error)
                error = __acpi_pm_prepare();
        return error;
}

/*
 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 * been requested.
 */
static struct platform_suspend_ops acpi_suspend_ops_old = {
        .valid = acpi_suspend_state_valid,
        .begin = acpi_suspend_begin_old,
        .prepare_late = acpi_pm_disable_gpes,
        .enter = acpi_suspend_enter,
        .wake = acpi_pm_finish,
        .end = acpi_pm_end,
        .recover = acpi_pm_finish,
};

static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
{
        old_suspend_ordering = true;
        return 0;
}

static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
{
        set_sci_en_on_resume = true;
        return 0;
}

static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
        {
        .callback = init_old_suspend_ordering,
        .ident = "Abit KN9 (nForce4 variant)",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
                DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "HP xw4600 Workstation",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
                },
        },
        {
        .callback = init_set_sci_en_on_resume,
        .ident = "Apple MacBook 1,1",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
                DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
                },
        },
        {
        .callback = init_set_sci_en_on_resume,
        .ident = "Apple MacMini 1,1",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
                DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
                DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
                },
        },
        {
        .callback = init_set_sci_en_on_resume,
        .ident = "Toshiba Satellite L300",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
                DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
                },
        },
        {
        .callback = init_set_sci_en_on_resume,
        .ident = "Hewlett-Packard HP G7000 Notebook PC",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
                },
        },
        {
        .callback = init_set_sci_en_on_resume,
        .ident = "Hewlett-Packard HP Pavilion dv3 Notebook PC",
        .matches = {
                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv3 Notebook PC"),
                },
        },
        {
        .callback = init_old_suspend_ordering,
        .ident = "Panasonic CF51-2L",
        .matches = {
                DMI_MATCH(DMI_BOARD_VENDOR,
                                "Matsushita Electric Industrial Co.,Ltd."),
                DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
                },
        },
        {},
};
#endif /* CONFIG_SUSPEND */

#ifdef CONFIG_HIBERNATION
/*
 * The ACPI specification wants us to save NVS memory regions during hibernation
 * and to restore them during the subsequent resume.  However, it is not certain
 * if this mechanism is going to work on all machines, so we allow the user to
 * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
 * option.
 */
static bool s4_no_nvs;

void __init acpi_s4_no_nvs(void)
{
        s4_no_nvs = true;
}

static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;

void __init acpi_no_s4_hw_signature(void)
{
        nosigcheck = true;
}

static int acpi_hibernation_begin(void)
{
        int error;

        error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
        if (!error) {
                acpi_target_sleep_state = ACPI_STATE_S4;
                acpi_sleep_tts_switch(acpi_target_sleep_state);
        }

        return error;
}

static int acpi_hibernation_pre_snapshot(void)
{
        int error = acpi_pm_prepare();

        if (!error)
                hibernate_nvs_save();

        return error;
}

static int acpi_hibernation_enter(void)
{
        acpi_status status = AE_OK;
        unsigned long flags = 0;

        ACPI_FLUSH_CPU_CACHE();

        local_irq_save(flags);
        acpi_enable_wakeup_device(ACPI_STATE_S4);
        /* This shouldn't return.  If it returns, we have a problem */
        status = acpi_enter_sleep_state(ACPI_STATE_S4);
        /* Reprogram control registers and execute _BFS */
        acpi_leave_sleep_state_prep(ACPI_STATE_S4);
        local_irq_restore(flags);

        return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}

static void acpi_hibernation_finish(void)
{
        hibernate_nvs_free();
        acpi_pm_finish();
}

static void acpi_hibernation_leave(void)
{
        /*
         * If ACPI is not enabled by the BIOS and the boot kernel, we need to
         * enable it here.
         */
        acpi_enable();
        /* Reprogram control registers and execute _BFS */
        acpi_leave_sleep_state_prep(ACPI_STATE_S4);
        /* Check the hardware signature */
        if (facs && s4_hardware_signature != facs->hardware_signature) {
                printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
                        "cannot resume!\n");
                panic("ACPI S4 hardware signature mismatch");
        }
        /* Restore the NVS memory area */
        hibernate_nvs_restore();
}

static void acpi_pm_enable_gpes(void)
{
        acpi_enable_all_runtime_gpes();
}

static struct platform_hibernation_ops acpi_hibernation_ops = {
        .begin = acpi_hibernation_begin,
        .end = acpi_pm_end,
        .pre_snapshot = acpi_hibernation_pre_snapshot,
        .finish = acpi_hibernation_finish,
        .prepare = acpi_pm_prepare,
        .enter = acpi_hibernation_enter,
        .leave = acpi_hibernation_leave,
        .pre_restore = acpi_pm_disable_gpes,
        .restore_cleanup = acpi_pm_enable_gpes,
};

/**
 *      acpi_hibernation_begin_old - Set the target system sleep state to
 *              ACPI_STATE_S4 and execute the _PTS control method.  This
 *              function is used if the pre-ACPI 2.0 suspend ordering has been
 *              requested.
 */
static int acpi_hibernation_begin_old(void)
{
        int error;
        /*
         * The _TTS object should always be evaluated before the _PTS object.
         * When the old_suspended_ordering is true, the _PTS object is
         * evaluated in the acpi_sleep_prepare.
         */
        acpi_sleep_tts_switch(ACPI_STATE_S4);

        error = acpi_sleep_prepare(ACPI_STATE_S4);

        if (!error) {
                if (!s4_no_nvs)
                        error = hibernate_nvs_alloc();
                if (!error)
                        acpi_target_sleep_state = ACPI_STATE_S4;
        }
        return error;
}

static int acpi_hibernation_pre_snapshot_old(void)
{
        int error = acpi_pm_disable_gpes();

        if (!error)
                hibernate_nvs_save();

        return error;
}

/*
 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 * been requested.
 */
static struct platform_hibernation_ops acpi_hibernation_ops_old = {
        .begin = acpi_hibernation_begin_old,
        .end = acpi_pm_end,
        .pre_snapshot = acpi_hibernation_pre_snapshot_old,
        .finish = acpi_hibernation_finish,
        .prepare = acpi_pm_disable_gpes,
        .enter = acpi_hibernation_enter,
        .leave = acpi_hibernation_leave,
        .pre_restore = acpi_pm_disable_gpes,
        .restore_cleanup = acpi_pm_enable_gpes,
        .recover = acpi_pm_finish,
};
#endif /* CONFIG_HIBERNATION */

int acpi_suspend(u32 acpi_state)
{
        suspend_state_t states[] = {
                [1] = PM_SUSPEND_STANDBY,
                [3] = PM_SUSPEND_MEM,
                [5] = PM_SUSPEND_MAX
        };

        if (acpi_state < 6 && states[acpi_state])
                return pm_suspend(states[acpi_state]);
        if (acpi_state == 4)
                return hibernate();
        return -EINVAL;
}

#ifdef CONFIG_PM_SLEEP
/**
 *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
 *              in the system sleep state given by %acpi_target_sleep_state
 *      @dev: device to examine; its driver model wakeup flags control
 *              whether it should be able to wake up the system
 *      @d_min_p: used to store the upper limit of allowed states range
 *      Return value: preferred power state of the device on success, -ENODEV on
 *              failure (ie. if there's no 'struct acpi_device' for @dev)
 *
 *      Find the lowest power (highest number) ACPI device power state that
 *      device @dev can be in while the system is in the sleep state represented
 *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
 *      able to wake up the system from this sleep state.  If @d_min_p is set,
 *      the highest power (lowest number) device power state of @dev allowed
 *      in this system sleep state is stored at the location pointed to by it.
 *
 *      The caller must ensure that @dev is valid before using this function.
 *      The caller is also responsible for figuring out if the device is
 *      supposed to be able to wake up the system and passing this information
 *      via @wake.
 */

int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
{
        acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
        struct acpi_device *adev;
        char acpi_method[] = "_SxD";
        unsigned long long d_min, d_max;

        if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
                printk(KERN_DEBUG "ACPI handle has no context!\n");
                return -ENODEV;
        }

        acpi_method[2] = '0' + acpi_target_sleep_state;
        /*
         * If the sleep state is S0, we will return D3, but if the device has
         * _S0W, we will use the value from _S0W
         */
        d_min = ACPI_STATE_D0;
        d_max = ACPI_STATE_D3;

        /*
         * If present, _SxD methods return the minimum D-state (highest power
         * state) we can use for the corresponding S-states.  Otherwise, the
         * minimum D-state is D0 (ACPI 3.x).
         *
         * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
         * provided -- that's our fault recovery, we ignore retval.
         */
        if (acpi_target_sleep_state > ACPI_STATE_S0)
                acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);

        /*
         * If _PRW says we can wake up the system from the target sleep state,
         * the D-state returned by _SxD is sufficient for that (we assume a
         * wakeup-aware driver if wake is set).  Still, if _SxW exists
         * (ACPI 3.x), it should return the maximum (lowest power) D-state that
         * can wake the system.  _S0W may be valid, too.
         */
        if (acpi_target_sleep_state == ACPI_STATE_S0 ||
            (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
             adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
                acpi_status status;

                acpi_method[3] = 'W';
                status = acpi_evaluate_integer(handle, acpi_method, NULL,
                                                &d_max);
                if (ACPI_FAILURE(status)) {
                        d_max = d_min;
                } else if (d_max < d_min) {
                        /* Warn the user of the broken DSDT */
                        printk(KERN_WARNING "ACPI: Wrong value from %s\n",
                                acpi_method);
                        /* Sanitize it */
                        d_min = d_max;
                }
        }

        if (d_min_p)
                *d_min_p = d_min;
        return d_max;
}

/**
 *      acpi_pm_device_sleep_wake - enable or disable the system wake-up
 *                                  capability of given device
 *      @dev: device to handle
 *      @enable: 'true' - enable, 'false' - disable the wake-up capability
 */
int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
{
        acpi_handle handle;
        struct acpi_device *adev;
        int error;

        if (!device_can_wakeup(dev))
                return -EINVAL;

        handle = DEVICE_ACPI_HANDLE(dev);
        if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
                dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
                return -ENODEV;
        }

        error = enable ?
                acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
                acpi_disable_wakeup_device_power(adev);
        if (!error)
                dev_info(dev, "wake-up capability %s by ACPI\n",
                                enable ? "enabled" : "disabled");

        return error;
}
#endif

static void acpi_power_off_prepare(void)
{
        /* Prepare to power off the system */
        acpi_sleep_prepare(ACPI_STATE_S5);
        acpi_disable_all_gpes();
}

static void acpi_power_off(void)
{
        /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
        printk(KERN_DEBUG "%s called\n", __func__);
        local_irq_disable();
        acpi_enable_wakeup_device(ACPI_STATE_S5);
        acpi_enter_sleep_state(ACPI_STATE_S5);
}

/*
 * ACPI 2.0 created the optional _GTS and _BFS,
 * but industry adoption has been neither rapid nor broad.
 *
 * Linux gets into trouble when it executes poorly validated
 * paths through the BIOS, so disable _GTS and _BFS by default,
 * but do speak up and offer the option to enable them.
 */
void __init acpi_gts_bfs_check(void)
{
        acpi_handle dummy;

        if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
        {
                printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
                printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
                        "please notify linux-acpi@vger.kernel.org\n");
        }
        if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
        {
                printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
                printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
                        "please notify linux-acpi@vger.kernel.org\n");
        }
}

int __init acpi_sleep_init(void)
{
        acpi_status status;
        u8 type_a, type_b;
#ifdef CONFIG_SUSPEND
        int i = 0;

        dmi_check_system(acpisleep_dmi_table);
#endif

        if (acpi_disabled)
                return 0;

        sleep_states[ACPI_STATE_S0] = 1;
        printk(KERN_INFO PREFIX "(supports S0");

#ifdef CONFIG_SUSPEND
        for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
                status = acpi_get_sleep_type_data(i, &type_a, &type_b);
                if (ACPI_SUCCESS(status)) {
                        sleep_states[i] = 1;
                        printk(" S%d", i);
                }
        }

        suspend_set_ops(old_suspend_ordering ?
                &acpi_suspend_ops_old : &acpi_suspend_ops);
#endif

#ifdef CONFIG_HIBERNATION
        status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
        if (ACPI_SUCCESS(status)) {
                hibernation_set_ops(old_suspend_ordering ?
                        &acpi_hibernation_ops_old : &acpi_hibernation_ops);
                sleep_states[ACPI_STATE_S4] = 1;
                printk(" S4");
                if (!nosigcheck) {
                        acpi_get_table(ACPI_SIG_FACS, 1,
                                (struct acpi_table_header **)&facs);
                        if (facs)
                                s4_hardware_signature =
                                        facs->hardware_signature;
                }
        }
#endif
        status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
        if (ACPI_SUCCESS(status)) {
                sleep_states[ACPI_STATE_S5] = 1;
                printk(" S5");
                pm_power_off_prepare = acpi_power_off_prepare;
                pm_power_off = acpi_power_off;
        }
        printk(")\n");
        /*
         * Register the tts_notifier to reboot notifier list so that the _TTS
         * object can also be evaluated when the system enters S5.
         */
        register_reboot_notifier(&tts_notifier);
        acpi_gts_bfs_check();
        return 0;
}