Full support for Ginger Console
[linux-ginger.git] / drivers / ata / pata_cs5536.c
blob6da4cb486c8db8d0866f23bf403f905de4c086e2
1 /*
2 * pata_cs5536.c - CS5536 PATA for new ATA layer
3 * (C) 2007 Martin K. Petersen <mkp@mkp.net>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 * Documentation:
19 * Available from AMD web site.
21 * The IDE timing registers for the CS5536 live in the Geode Machine
22 * Specific Register file and not PCI config space. Most BIOSes
23 * virtualize the PCI registers so the chip looks like a standard IDE
24 * controller. Unfortunately not all implementations get this right.
25 * In particular some have problems with unaligned accesses to the
26 * virtualized PCI registers. This driver always does full dword
27 * writes to work around the issue. Also, in case of a bad BIOS this
28 * driver can be loaded with the "msr=1" parameter which forces using
29 * the Machine Specific Registers to configure the device.
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/pci.h>
35 #include <linux/init.h>
36 #include <linux/blkdev.h>
37 #include <linux/delay.h>
38 #include <linux/libata.h>
39 #include <scsi/scsi_host.h>
40 #include <asm/msr.h>
42 #define DRV_NAME "pata_cs5536"
43 #define DRV_VERSION "0.0.7"
45 enum {
46 CFG = 0,
47 DTC = 1,
48 CAST = 2,
49 ETC = 3,
51 MSR_IDE_BASE = 0x51300000,
52 MSR_IDE_CFG = (MSR_IDE_BASE + 0x10),
53 MSR_IDE_DTC = (MSR_IDE_BASE + 0x12),
54 MSR_IDE_CAST = (MSR_IDE_BASE + 0x13),
55 MSR_IDE_ETC = (MSR_IDE_BASE + 0x14),
57 PCI_IDE_CFG = 0x40,
58 PCI_IDE_DTC = 0x48,
59 PCI_IDE_CAST = 0x4c,
60 PCI_IDE_ETC = 0x50,
62 IDE_CFG_CHANEN = 0x2,
63 IDE_CFG_CABLE = 0x10000,
65 IDE_D0_SHIFT = 24,
66 IDE_D1_SHIFT = 16,
67 IDE_DRV_MASK = 0xff,
69 IDE_CAST_D0_SHIFT = 6,
70 IDE_CAST_D1_SHIFT = 4,
71 IDE_CAST_DRV_MASK = 0x3,
72 IDE_CAST_CMD_MASK = 0xff,
73 IDE_CAST_CMD_SHIFT = 24,
75 IDE_ETC_NODMA = 0x03,
78 static int use_msr;
80 static const u32 msr_reg[4] = {
81 MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
84 static const u8 pci_reg[4] = {
85 PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
88 static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
90 if (unlikely(use_msr)) {
91 u32 dummy;
93 rdmsr(msr_reg[reg], *val, dummy);
94 return 0;
97 return pci_read_config_dword(pdev, pci_reg[reg], val);
100 static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
102 if (unlikely(use_msr)) {
103 wrmsr(msr_reg[reg], val, 0);
104 return 0;
107 return pci_write_config_dword(pdev, pci_reg[reg], val);
111 * cs5536_cable_detect - detect cable type
112 * @ap: Port to detect on
114 * Perform cable detection for ATA66 capable cable. Return a libata
115 * cable type.
118 static int cs5536_cable_detect(struct ata_port *ap)
120 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
121 u32 cfg;
123 cs5536_read(pdev, CFG, &cfg);
125 if (cfg & (IDE_CFG_CABLE << ap->port_no))
126 return ATA_CBL_PATA80;
127 else
128 return ATA_CBL_PATA40;
132 * cs5536_set_piomode - PIO setup
133 * @ap: ATA interface
134 * @adev: device on the interface
137 static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
139 static const u8 drv_timings[5] = {
140 0x98, 0x55, 0x32, 0x21, 0x20,
143 static const u8 addr_timings[5] = {
144 0x2, 0x1, 0x0, 0x0, 0x0,
147 static const u8 cmd_timings[5] = {
148 0x99, 0x92, 0x90, 0x22, 0x20,
151 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
152 struct ata_device *pair = ata_dev_pair(adev);
153 int mode = adev->pio_mode - XFER_PIO_0;
154 int cmdmode = mode;
155 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
156 int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
157 u32 dtc, cast, etc;
159 if (pair)
160 cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
162 cs5536_read(pdev, DTC, &dtc);
163 cs5536_read(pdev, CAST, &cast);
164 cs5536_read(pdev, ETC, &etc);
166 dtc &= ~(IDE_DRV_MASK << dshift);
167 dtc |= drv_timings[mode] << dshift;
169 cast &= ~(IDE_CAST_DRV_MASK << cshift);
170 cast |= addr_timings[mode] << cshift;
172 cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
173 cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
175 etc &= ~(IDE_DRV_MASK << dshift);
176 etc |= IDE_ETC_NODMA << dshift;
178 cs5536_write(pdev, DTC, dtc);
179 cs5536_write(pdev, CAST, cast);
180 cs5536_write(pdev, ETC, etc);
184 * cs5536_set_dmamode - DMA timing setup
185 * @ap: ATA interface
186 * @adev: Device being configured
190 static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
192 static const u8 udma_timings[6] = {
193 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
196 static const u8 mwdma_timings[3] = {
197 0x67, 0x21, 0x20,
200 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
201 u32 dtc, etc;
202 int mode = adev->dma_mode;
203 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
205 if (mode >= XFER_UDMA_0) {
206 cs5536_read(pdev, ETC, &etc);
208 etc &= ~(IDE_DRV_MASK << dshift);
209 etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
211 cs5536_write(pdev, ETC, etc);
212 } else { /* MWDMA */
213 cs5536_read(pdev, DTC, &dtc);
215 dtc &= ~(IDE_DRV_MASK << dshift);
216 dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift;
218 cs5536_write(pdev, DTC, dtc);
222 static struct scsi_host_template cs5536_sht = {
223 ATA_BMDMA_SHT(DRV_NAME),
226 static struct ata_port_operations cs5536_port_ops = {
227 .inherits = &ata_bmdma_port_ops,
228 .cable_detect = cs5536_cable_detect,
229 .set_piomode = cs5536_set_piomode,
230 .set_dmamode = cs5536_set_dmamode,
234 * cs5536_init_one
235 * @dev: PCI device
236 * @id: Entry in match table
240 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
242 static const struct ata_port_info info = {
243 .flags = ATA_FLAG_SLAVE_POSS,
244 .pio_mask = ATA_PIO4,
245 .mwdma_mask = ATA_MWDMA2,
246 .udma_mask = ATA_UDMA5,
247 .port_ops = &cs5536_port_ops,
250 const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
251 u32 cfg;
253 if (use_msr)
254 printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
256 cs5536_read(dev, CFG, &cfg);
258 if ((cfg & IDE_CFG_CHANEN) == 0) {
259 printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
260 return -ENODEV;
263 return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
266 static const struct pci_device_id cs5536[] = {
267 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
268 { },
271 static struct pci_driver cs5536_pci_driver = {
272 .name = DRV_NAME,
273 .id_table = cs5536,
274 .probe = cs5536_init_one,
275 .remove = ata_pci_remove_one,
276 #ifdef CONFIG_PM
277 .suspend = ata_pci_device_suspend,
278 .resume = ata_pci_device_resume,
279 #endif
282 static int __init cs5536_init(void)
284 return pci_register_driver(&cs5536_pci_driver);
287 static void __exit cs5536_exit(void)
289 pci_unregister_driver(&cs5536_pci_driver);
292 MODULE_AUTHOR("Martin K. Petersen");
293 MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
294 MODULE_LICENSE("GPL");
295 MODULE_DEVICE_TABLE(pci, cs5536);
296 MODULE_VERSION(DRV_VERSION);
297 module_param_named(msr, use_msr, int, 0644);
298 MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
300 module_init(cs5536_init);
301 module_exit(cs5536_exit);