Full support for Ginger Console
[linux-ginger.git] / drivers / gpu / drm / i915 / i915_gem_tiling.c
blob200e398453ca5305987a2d851a5361ba29d7bba2
1 /*
2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21 * IN THE SOFTWARE.
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
28 #include <linux/acpi.h>
29 #include <linux/pnp.h>
30 #include "linux/string.h"
31 #include "linux/bitops.h"
32 #include "drmP.h"
33 #include "drm.h"
34 #include "i915_drm.h"
35 #include "i915_drv.h"
37 /** @file i915_gem_tiling.c
39 * Support for managing tiling state of buffer objects.
41 * The idea behind tiling is to increase cache hit rates by rearranging
42 * pixel data so that a group of pixel accesses are in the same cacheline.
43 * Performance improvement from doing this on the back/depth buffer are on
44 * the order of 30%.
46 * Intel architectures make this somewhat more complicated, though, by
47 * adjustments made to addressing of data when the memory is in interleaved
48 * mode (matched pairs of DIMMS) to improve memory bandwidth.
49 * For interleaved memory, the CPU sends every sequential 64 bytes
50 * to an alternate memory channel so it can get the bandwidth from both.
52 * The GPU also rearranges its accesses for increased bandwidth to interleaved
53 * memory, and it matches what the CPU does for non-tiled. However, when tiled
54 * it does it a little differently, since one walks addresses not just in the
55 * X direction but also Y. So, along with alternating channels when bit
56 * 6 of the address flips, it also alternates when other bits flip -- Bits 9
57 * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
58 * are common to both the 915 and 965-class hardware.
60 * The CPU also sometimes XORs in higher bits as well, to improve
61 * bandwidth doing strided access like we do so frequently in graphics. This
62 * is called "Channel XOR Randomization" in the MCH documentation. The result
63 * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
64 * decode.
66 * All of this bit 6 XORing has an effect on our memory management,
67 * as we need to make sure that the 3d driver can correctly address object
68 * contents.
70 * If we don't have interleaved memory, all tiling is safe and no swizzling is
71 * required.
73 * When bit 17 is XORed in, we simply refuse to tile at all. Bit
74 * 17 is not just a page offset, so as we page an objet out and back in,
75 * individual pages in it will have different bit 17 addresses, resulting in
76 * each 64 bytes being swapped with its neighbor!
78 * Otherwise, if interleaved, we have to tell the 3d driver what the address
79 * swizzling it needs to do is, since it's writing with the CPU to the pages
80 * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
81 * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
82 * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
83 * to match what the GPU expects.
86 #define MCHBAR_I915 0x44
87 #define MCHBAR_I965 0x48
88 #define MCHBAR_SIZE (4*4096)
90 #define DEVEN_REG 0x54
91 #define DEVEN_MCHBAR_EN (1 << 28)
93 /* Allocate space for the MCH regs if needed, return nonzero on error */
94 static int
95 intel_alloc_mchbar_resource(struct drm_device *dev)
97 drm_i915_private_t *dev_priv = dev->dev_private;
98 int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
99 u32 temp_lo, temp_hi = 0;
100 u64 mchbar_addr;
101 int ret = 0;
103 if (IS_I965G(dev))
104 pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
105 pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
106 mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
108 /* If ACPI doesn't have it, assume we need to allocate it ourselves */
109 #ifdef CONFIG_PNP
110 if (mchbar_addr &&
111 pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
112 ret = 0;
113 goto out;
115 #endif
117 /* Get some space for it */
118 ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, &dev_priv->mch_res,
119 MCHBAR_SIZE, MCHBAR_SIZE,
120 PCIBIOS_MIN_MEM,
121 0, pcibios_align_resource,
122 dev_priv->bridge_dev);
123 if (ret) {
124 DRM_DEBUG("failed bus alloc: %d\n", ret);
125 dev_priv->mch_res.start = 0;
126 goto out;
129 if (IS_I965G(dev))
130 pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
131 upper_32_bits(dev_priv->mch_res.start));
133 pci_write_config_dword(dev_priv->bridge_dev, reg,
134 lower_32_bits(dev_priv->mch_res.start));
135 out:
136 return ret;
139 /* Setup MCHBAR if possible, return true if we should disable it again */
140 static bool
141 intel_setup_mchbar(struct drm_device *dev)
143 drm_i915_private_t *dev_priv = dev->dev_private;
144 int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
145 u32 temp;
146 bool need_disable = false, enabled;
148 if (IS_I915G(dev) || IS_I915GM(dev)) {
149 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
150 enabled = !!(temp & DEVEN_MCHBAR_EN);
151 } else {
152 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
153 enabled = temp & 1;
156 /* If it's already enabled, don't have to do anything */
157 if (enabled)
158 goto out;
160 if (intel_alloc_mchbar_resource(dev))
161 goto out;
163 need_disable = true;
165 /* Space is allocated or reserved, so enable it. */
166 if (IS_I915G(dev) || IS_I915GM(dev)) {
167 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
168 temp | DEVEN_MCHBAR_EN);
169 } else {
170 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
171 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
173 out:
174 return need_disable;
177 static void
178 intel_teardown_mchbar(struct drm_device *dev, bool disable)
180 drm_i915_private_t *dev_priv = dev->dev_private;
181 int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
182 u32 temp;
184 if (disable) {
185 if (IS_I915G(dev) || IS_I915GM(dev)) {
186 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
187 temp &= ~DEVEN_MCHBAR_EN;
188 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
189 } else {
190 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
191 temp &= ~1;
192 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
196 if (dev_priv->mch_res.start)
197 release_resource(&dev_priv->mch_res);
201 * Detects bit 6 swizzling of address lookup between IGD access and CPU
202 * access through main memory.
204 void
205 i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
207 drm_i915_private_t *dev_priv = dev->dev_private;
208 uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
209 uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
210 bool need_disable;
212 if (IS_IGDNG(dev)) {
213 /* On IGDNG whatever DRAM config, GPU always do
214 * same swizzling setup.
216 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
217 swizzle_y = I915_BIT_6_SWIZZLE_9;
218 } else if (!IS_I9XX(dev)) {
219 /* As far as we know, the 865 doesn't have these bit 6
220 * swizzling issues.
222 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
223 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
224 } else if (IS_MOBILE(dev)) {
225 uint32_t dcc;
227 /* Try to make sure MCHBAR is enabled before poking at it */
228 need_disable = intel_setup_mchbar(dev);
230 /* On mobile 9xx chipsets, channel interleave by the CPU is
231 * determined by DCC. For single-channel, neither the CPU
232 * nor the GPU do swizzling. For dual channel interleaved,
233 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
234 * 9 for Y tiled. The CPU's interleave is independent, and
235 * can be based on either bit 11 (haven't seen this yet) or
236 * bit 17 (common).
238 dcc = I915_READ(DCC);
239 switch (dcc & DCC_ADDRESSING_MODE_MASK) {
240 case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
241 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
242 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
243 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
244 break;
245 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
246 if (dcc & DCC_CHANNEL_XOR_DISABLE) {
247 /* This is the base swizzling by the GPU for
248 * tiled buffers.
250 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
251 swizzle_y = I915_BIT_6_SWIZZLE_9;
252 } else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
253 /* Bit 11 swizzling by the CPU in addition. */
254 swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
255 swizzle_y = I915_BIT_6_SWIZZLE_9_11;
256 } else {
257 /* Bit 17 swizzling by the CPU in addition. */
258 swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
259 swizzle_y = I915_BIT_6_SWIZZLE_9_17;
261 break;
263 if (dcc == 0xffffffff) {
264 DRM_ERROR("Couldn't read from MCHBAR. "
265 "Disabling tiling.\n");
266 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
267 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
270 intel_teardown_mchbar(dev, need_disable);
271 } else {
272 /* The 965, G33, and newer, have a very flexible memory
273 * configuration. It will enable dual-channel mode
274 * (interleaving) on as much memory as it can, and the GPU
275 * will additionally sometimes enable different bit 6
276 * swizzling for tiled objects from the CPU.
278 * Here's what I found on the G965:
279 * slot fill memory size swizzling
280 * 0A 0B 1A 1B 1-ch 2-ch
281 * 512 0 0 0 512 0 O
282 * 512 0 512 0 16 1008 X
283 * 512 0 0 512 16 1008 X
284 * 0 512 0 512 16 1008 X
285 * 1024 1024 1024 0 2048 1024 O
287 * We could probably detect this based on either the DRB
288 * matching, which was the case for the swizzling required in
289 * the table above, or from the 1-ch value being less than
290 * the minimum size of a rank.
292 if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
293 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
294 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
295 } else {
296 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
297 swizzle_y = I915_BIT_6_SWIZZLE_9;
301 dev_priv->mm.bit_6_swizzle_x = swizzle_x;
302 dev_priv->mm.bit_6_swizzle_y = swizzle_y;
307 * Returns the size of the fence for a tiled object of the given size.
309 static int
310 i915_get_fence_size(struct drm_device *dev, int size)
312 int i;
313 int start;
315 if (IS_I965G(dev)) {
316 /* The 965 can have fences at any page boundary. */
317 return ALIGN(size, 4096);
318 } else {
319 /* Align the size to a power of two greater than the smallest
320 * fence size.
322 if (IS_I9XX(dev))
323 start = 1024 * 1024;
324 else
325 start = 512 * 1024;
327 for (i = start; i < size; i <<= 1)
330 return i;
334 /* Check pitch constriants for all chips & tiling formats */
335 static bool
336 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
338 int tile_width;
340 /* Linear is always fine */
341 if (tiling_mode == I915_TILING_NONE)
342 return true;
344 if (!IS_I9XX(dev) ||
345 (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
346 tile_width = 128;
347 else
348 tile_width = 512;
350 /* check maximum stride & object size */
351 if (IS_I965G(dev)) {
352 /* i965 stores the end address of the gtt mapping in the fence
353 * reg, so dont bother to check the size */
354 if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
355 return false;
356 } else if (IS_I9XX(dev)) {
357 uint32_t pitch_val = ffs(stride / tile_width) - 1;
359 /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
360 * instead of 4 (2KB) on 945s.
362 if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
363 size > (I830_FENCE_MAX_SIZE_VAL << 20))
364 return false;
365 } else {
366 uint32_t pitch_val = ffs(stride / tile_width) - 1;
368 if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
369 size > (I830_FENCE_MAX_SIZE_VAL << 19))
370 return false;
373 /* 965+ just needs multiples of tile width */
374 if (IS_I965G(dev)) {
375 if (stride & (tile_width - 1))
376 return false;
377 return true;
380 /* Pre-965 needs power of two tile widths */
381 if (stride < tile_width)
382 return false;
384 if (stride & (stride - 1))
385 return false;
387 /* We don't 0handle the aperture area covered by the fence being bigger
388 * than the object size.
390 if (i915_get_fence_size(dev, size) != size)
391 return false;
393 return true;
396 static bool
397 i915_gem_object_fence_offset_ok(struct drm_gem_object *obj, int tiling_mode)
399 struct drm_device *dev = obj->dev;
400 struct drm_i915_gem_object *obj_priv = obj->driver_private;
402 if (obj_priv->gtt_space == NULL)
403 return true;
405 if (tiling_mode == I915_TILING_NONE)
406 return true;
408 if (!IS_I965G(dev)) {
409 if (obj_priv->gtt_offset & (obj->size - 1))
410 return false;
411 if (IS_I9XX(dev)) {
412 if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
413 return false;
414 } else {
415 if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
416 return false;
420 return true;
424 * Sets the tiling mode of an object, returning the required swizzling of
425 * bit 6 of addresses in the object.
428 i915_gem_set_tiling(struct drm_device *dev, void *data,
429 struct drm_file *file_priv)
431 struct drm_i915_gem_set_tiling *args = data;
432 drm_i915_private_t *dev_priv = dev->dev_private;
433 struct drm_gem_object *obj;
434 struct drm_i915_gem_object *obj_priv;
435 int ret = 0;
437 obj = drm_gem_object_lookup(dev, file_priv, args->handle);
438 if (obj == NULL)
439 return -EINVAL;
440 obj_priv = obj->driver_private;
442 if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
443 mutex_lock(&dev->struct_mutex);
444 drm_gem_object_unreference(obj);
445 mutex_unlock(&dev->struct_mutex);
446 return -EINVAL;
449 if (args->tiling_mode == I915_TILING_NONE) {
450 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
451 args->stride = 0;
452 } else {
453 if (args->tiling_mode == I915_TILING_X)
454 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
455 else
456 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
458 /* Hide bit 17 swizzling from the user. This prevents old Mesa
459 * from aborting the application on sw fallbacks to bit 17,
460 * and we use the pread/pwrite bit17 paths to swizzle for it.
461 * If there was a user that was relying on the swizzle
462 * information for drm_intel_bo_map()ed reads/writes this would
463 * break it, but we don't have any of those.
465 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
466 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
467 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
468 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
470 /* If we can't handle the swizzling, make it untiled. */
471 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
472 args->tiling_mode = I915_TILING_NONE;
473 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
474 args->stride = 0;
478 mutex_lock(&dev->struct_mutex);
479 if (args->tiling_mode != obj_priv->tiling_mode ||
480 args->stride != obj_priv->stride) {
481 /* We need to rebind the object if its current allocation
482 * no longer meets the alignment restrictions for its new
483 * tiling mode. Otherwise we can just leave it alone, but
484 * need to ensure that any fence register is cleared.
486 if (!i915_gem_object_fence_offset_ok(obj, args->tiling_mode))
487 ret = i915_gem_object_unbind(obj);
488 else
489 ret = i915_gem_object_put_fence_reg(obj);
490 if (ret != 0) {
491 WARN(ret != -ERESTARTSYS,
492 "failed to reset object for tiling switch");
493 args->tiling_mode = obj_priv->tiling_mode;
494 args->stride = obj_priv->stride;
495 goto err;
498 /* If we've changed tiling, GTT-mappings of the object
499 * need to re-fault to ensure that the correct fence register
500 * setup is in place.
502 i915_gem_release_mmap(obj);
504 obj_priv->tiling_mode = args->tiling_mode;
505 obj_priv->stride = args->stride;
507 err:
508 drm_gem_object_unreference(obj);
509 mutex_unlock(&dev->struct_mutex);
511 return ret;
515 * Returns the current tiling mode and required bit 6 swizzling for the object.
518 i915_gem_get_tiling(struct drm_device *dev, void *data,
519 struct drm_file *file_priv)
521 struct drm_i915_gem_get_tiling *args = data;
522 drm_i915_private_t *dev_priv = dev->dev_private;
523 struct drm_gem_object *obj;
524 struct drm_i915_gem_object *obj_priv;
526 obj = drm_gem_object_lookup(dev, file_priv, args->handle);
527 if (obj == NULL)
528 return -EINVAL;
529 obj_priv = obj->driver_private;
531 mutex_lock(&dev->struct_mutex);
533 args->tiling_mode = obj_priv->tiling_mode;
534 switch (obj_priv->tiling_mode) {
535 case I915_TILING_X:
536 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
537 break;
538 case I915_TILING_Y:
539 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
540 break;
541 case I915_TILING_NONE:
542 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
543 break;
544 default:
545 DRM_ERROR("unknown tiling mode\n");
548 /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
549 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
550 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
551 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
552 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
554 drm_gem_object_unreference(obj);
555 mutex_unlock(&dev->struct_mutex);
557 return 0;
561 * Swap every 64 bytes of this page around, to account for it having a new
562 * bit 17 of its physical address and therefore being interpreted differently
563 * by the GPU.
565 static int
566 i915_gem_swizzle_page(struct page *page)
568 char *vaddr;
569 int i;
570 char temp[64];
572 vaddr = kmap(page);
573 if (vaddr == NULL)
574 return -ENOMEM;
576 for (i = 0; i < PAGE_SIZE; i += 128) {
577 memcpy(temp, &vaddr[i], 64);
578 memcpy(&vaddr[i], &vaddr[i + 64], 64);
579 memcpy(&vaddr[i + 64], temp, 64);
582 kunmap(page);
584 return 0;
587 void
588 i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
590 struct drm_device *dev = obj->dev;
591 drm_i915_private_t *dev_priv = dev->dev_private;
592 struct drm_i915_gem_object *obj_priv = obj->driver_private;
593 int page_count = obj->size >> PAGE_SHIFT;
594 int i;
596 if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
597 return;
599 if (obj_priv->bit_17 == NULL)
600 return;
602 for (i = 0; i < page_count; i++) {
603 char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
604 if ((new_bit_17 & 0x1) !=
605 (test_bit(i, obj_priv->bit_17) != 0)) {
606 int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
607 if (ret != 0) {
608 DRM_ERROR("Failed to swizzle page\n");
609 return;
611 set_page_dirty(obj_priv->pages[i]);
616 void
617 i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
619 struct drm_device *dev = obj->dev;
620 drm_i915_private_t *dev_priv = dev->dev_private;
621 struct drm_i915_gem_object *obj_priv = obj->driver_private;
622 int page_count = obj->size >> PAGE_SHIFT;
623 int i;
625 if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
626 return;
628 if (obj_priv->bit_17 == NULL) {
629 obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
630 sizeof(long), GFP_KERNEL);
631 if (obj_priv->bit_17 == NULL) {
632 DRM_ERROR("Failed to allocate memory for bit 17 "
633 "record\n");
634 return;
638 for (i = 0; i < page_count; i++) {
639 if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
640 __set_bit(i, obj_priv->bit_17);
641 else
642 __clear_bit(i, obj_priv->bit_17);