Full support for Ginger Console
[linux-ginger.git] / drivers / macintosh / via-pmu68k.c
blobfb9fa614a0e8e2f1f4ff0792c3b0ec1e476239ff
1 /*
2 * Device driver for the PMU on 68K-based Apple PowerBooks
4 * The VIA (versatile interface adapter) interfaces to the PMU,
5 * a 6805 microprocessor core whose primary function is to control
6 * battery charging and system power on the PowerBooks.
7 * The PMU also controls the ADB (Apple Desktop Bus) which connects
8 * to the keyboard and mouse, as well as the non-volatile RAM
9 * and the RTC (real time clock) chip.
11 * Adapted for 68K PMU by Joshua M. Thompson
13 * Based largely on the PowerMac PMU code by Paul Mackerras and
14 * Fabio Riccardi.
16 * Also based on the PMU driver from MkLinux by Apple Computer, Inc.
17 * and the Open Software Foundation, Inc.
20 #include <stdarg.h>
21 #include <linux/types.h>
22 #include <linux/errno.h>
23 #include <linux/kernel.h>
24 #include <linux/delay.h>
25 #include <linux/miscdevice.h>
26 #include <linux/blkdev.h>
27 #include <linux/pci.h>
28 #include <linux/slab.h>
29 #include <linux/init.h>
30 #include <linux/interrupt.h>
32 #include <linux/adb.h>
33 #include <linux/pmu.h>
34 #include <linux/cuda.h>
36 #include <asm/macintosh.h>
37 #include <asm/macints.h>
38 #include <asm/mac_via.h>
40 #include <asm/pgtable.h>
41 #include <asm/system.h>
42 #include <asm/irq.h>
43 #include <asm/uaccess.h>
45 /* Misc minor number allocated for /dev/pmu */
46 #define PMU_MINOR 154
48 /* VIA registers - spaced 0x200 bytes apart */
49 #define RS 0x200 /* skip between registers */
50 #define B 0 /* B-side data */
51 #define A RS /* A-side data */
52 #define DIRB (2*RS) /* B-side direction (1=output) */
53 #define DIRA (3*RS) /* A-side direction (1=output) */
54 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
55 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
56 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
57 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
58 #define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
59 #define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
60 #define SR (10*RS) /* Shift register */
61 #define ACR (11*RS) /* Auxiliary control register */
62 #define PCR (12*RS) /* Peripheral control register */
63 #define IFR (13*RS) /* Interrupt flag register */
64 #define IER (14*RS) /* Interrupt enable register */
65 #define ANH (15*RS) /* A-side data, no handshake */
67 /* Bits in B data register: both active low */
68 #define TACK 0x02 /* Transfer acknowledge (input) */
69 #define TREQ 0x04 /* Transfer request (output) */
71 /* Bits in ACR */
72 #define SR_CTRL 0x1c /* Shift register control bits */
73 #define SR_EXT 0x0c /* Shift on external clock */
74 #define SR_OUT 0x10 /* Shift out if 1 */
76 /* Bits in IFR and IER */
77 #define SR_INT 0x04 /* Shift register full/empty */
78 #define CB1_INT 0x10 /* transition on CB1 input */
80 static enum pmu_state {
81 idle,
82 sending,
83 intack,
84 reading,
85 reading_intr,
86 } pmu_state;
88 static struct adb_request *current_req;
89 static struct adb_request *last_req;
90 static struct adb_request *req_awaiting_reply;
91 static unsigned char interrupt_data[32];
92 static unsigned char *reply_ptr;
93 static int data_index;
94 static int data_len;
95 static int adb_int_pending;
96 static int pmu_adb_flags;
97 static int adb_dev_map;
98 static struct adb_request bright_req_1, bright_req_2, bright_req_3;
99 static int pmu_kind = PMU_UNKNOWN;
100 static int pmu_fully_inited;
102 int asleep;
104 static int pmu_probe(void);
105 static int pmu_init(void);
106 static void pmu_start(void);
107 static irqreturn_t pmu_interrupt(int irq, void *arg);
108 static int pmu_send_request(struct adb_request *req, int sync);
109 static int pmu_autopoll(int devs);
110 void pmu_poll(void);
111 static int pmu_reset_bus(void);
113 static void pmu_start(void);
114 static void send_byte(int x);
115 static void recv_byte(void);
116 static void pmu_done(struct adb_request *req);
117 static void pmu_handle_data(unsigned char *data, int len);
118 static void set_volume(int level);
119 static void pmu_enable_backlight(int on);
120 static void pmu_set_brightness(int level);
122 struct adb_driver via_pmu_driver = {
123 "68K PMU",
124 pmu_probe,
125 pmu_init,
126 pmu_send_request,
127 pmu_autopoll,
128 pmu_poll,
129 pmu_reset_bus
133 * This table indicates for each PMU opcode:
134 * - the number of data bytes to be sent with the command, or -1
135 * if a length byte should be sent,
136 * - the number of response bytes which the PMU will return, or
137 * -1 if it will send a length byte.
139 static s8 pmu_data_len[256][2] = {
140 /* 0 1 2 3 4 5 6 7 */
141 /*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
142 /*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
143 /*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
144 /*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
145 /*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
146 /*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
147 /*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
148 /*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
149 /*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
150 /*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
151 /*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
152 /*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
153 /*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
154 /*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
155 /*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
156 /*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
157 /*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
158 /*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
159 /*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
160 /*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
161 /*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
162 /*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
163 /*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
164 /*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
165 /*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
166 /*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
167 /*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
168 /*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
169 /*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
170 /*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
171 /*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
172 /*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
175 int pmu_probe(void)
177 if (macintosh_config->adb_type == MAC_ADB_PB1) {
178 pmu_kind = PMU_68K_V1;
179 } else if (macintosh_config->adb_type == MAC_ADB_PB2) {
180 pmu_kind = PMU_68K_V2;
181 } else {
182 return -ENODEV;
185 pmu_state = idle;
187 return 0;
190 static int
191 pmu_init(void)
193 int timeout;
194 volatile struct adb_request req;
196 via2[B] |= TREQ; /* negate TREQ */
197 via2[DIRB] = (via2[DIRB] | TREQ) & ~TACK; /* TACK in, TREQ out */
199 pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB);
200 timeout = 100000;
201 while (!req.complete) {
202 if (--timeout < 0) {
203 printk(KERN_ERR "pmu_init: no response from PMU\n");
204 return -EAGAIN;
206 udelay(10);
207 pmu_poll();
210 /* ack all pending interrupts */
211 timeout = 100000;
212 interrupt_data[0] = 1;
213 while (interrupt_data[0] || pmu_state != idle) {
214 if (--timeout < 0) {
215 printk(KERN_ERR "pmu_init: timed out acking intrs\n");
216 return -EAGAIN;
218 if (pmu_state == idle) {
219 adb_int_pending = 1;
220 pmu_interrupt(0, NULL);
222 pmu_poll();
223 udelay(10);
226 pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK,
227 PMU_INT_ADB_AUTO|PMU_INT_SNDBRT|PMU_INT_ADB);
228 timeout = 100000;
229 while (!req.complete) {
230 if (--timeout < 0) {
231 printk(KERN_ERR "pmu_init: no response from PMU\n");
232 return -EAGAIN;
234 udelay(10);
235 pmu_poll();
238 bright_req_1.complete = 1;
239 bright_req_2.complete = 1;
240 bright_req_3.complete = 1;
242 if (request_irq(IRQ_MAC_ADB_SR, pmu_interrupt, 0, "pmu-shift",
243 pmu_interrupt)) {
244 printk(KERN_ERR "pmu_init: can't get irq %d\n",
245 IRQ_MAC_ADB_SR);
246 return -EAGAIN;
248 if (request_irq(IRQ_MAC_ADB_CL, pmu_interrupt, 0, "pmu-clock",
249 pmu_interrupt)) {
250 printk(KERN_ERR "pmu_init: can't get irq %d\n",
251 IRQ_MAC_ADB_CL);
252 free_irq(IRQ_MAC_ADB_SR, pmu_interrupt);
253 return -EAGAIN;
256 pmu_fully_inited = 1;
258 /* Enable backlight */
259 pmu_enable_backlight(1);
261 printk("adb: PMU 68K driver v0.5 for Unified ADB.\n");
263 return 0;
267 pmu_get_model(void)
269 return pmu_kind;
272 /* Send an ADB command */
273 static int
274 pmu_send_request(struct adb_request *req, int sync)
276 int i, ret;
278 if (!pmu_fully_inited)
280 req->complete = 1;
281 return -ENXIO;
284 ret = -EINVAL;
286 switch (req->data[0]) {
287 case PMU_PACKET:
288 for (i = 0; i < req->nbytes - 1; ++i)
289 req->data[i] = req->data[i+1];
290 --req->nbytes;
291 if (pmu_data_len[req->data[0]][1] != 0) {
292 req->reply[0] = ADB_RET_OK;
293 req->reply_len = 1;
294 } else
295 req->reply_len = 0;
296 ret = pmu_queue_request(req);
297 break;
298 case CUDA_PACKET:
299 switch (req->data[1]) {
300 case CUDA_GET_TIME:
301 if (req->nbytes != 2)
302 break;
303 req->data[0] = PMU_READ_RTC;
304 req->nbytes = 1;
305 req->reply_len = 3;
306 req->reply[0] = CUDA_PACKET;
307 req->reply[1] = 0;
308 req->reply[2] = CUDA_GET_TIME;
309 ret = pmu_queue_request(req);
310 break;
311 case CUDA_SET_TIME:
312 if (req->nbytes != 6)
313 break;
314 req->data[0] = PMU_SET_RTC;
315 req->nbytes = 5;
316 for (i = 1; i <= 4; ++i)
317 req->data[i] = req->data[i+1];
318 req->reply_len = 3;
319 req->reply[0] = CUDA_PACKET;
320 req->reply[1] = 0;
321 req->reply[2] = CUDA_SET_TIME;
322 ret = pmu_queue_request(req);
323 break;
324 case CUDA_GET_PRAM:
325 if (req->nbytes != 4)
326 break;
327 req->data[0] = PMU_READ_NVRAM;
328 req->data[1] = req->data[2];
329 req->data[2] = req->data[3];
330 req->nbytes = 3;
331 req->reply_len = 3;
332 req->reply[0] = CUDA_PACKET;
333 req->reply[1] = 0;
334 req->reply[2] = CUDA_GET_PRAM;
335 ret = pmu_queue_request(req);
336 break;
337 case CUDA_SET_PRAM:
338 if (req->nbytes != 5)
339 break;
340 req->data[0] = PMU_WRITE_NVRAM;
341 req->data[1] = req->data[2];
342 req->data[2] = req->data[3];
343 req->data[3] = req->data[4];
344 req->nbytes = 4;
345 req->reply_len = 3;
346 req->reply[0] = CUDA_PACKET;
347 req->reply[1] = 0;
348 req->reply[2] = CUDA_SET_PRAM;
349 ret = pmu_queue_request(req);
350 break;
352 break;
353 case ADB_PACKET:
354 for (i = req->nbytes - 1; i > 1; --i)
355 req->data[i+2] = req->data[i];
356 req->data[3] = req->nbytes - 2;
357 req->data[2] = pmu_adb_flags;
358 /*req->data[1] = req->data[1];*/
359 req->data[0] = PMU_ADB_CMD;
360 req->nbytes += 2;
361 req->reply_expected = 1;
362 req->reply_len = 0;
363 ret = pmu_queue_request(req);
364 break;
366 if (ret)
368 req->complete = 1;
369 return ret;
372 if (sync) {
373 while (!req->complete)
374 pmu_poll();
377 return 0;
380 /* Enable/disable autopolling */
381 static int
382 pmu_autopoll(int devs)
384 struct adb_request req;
386 if (!pmu_fully_inited) return -ENXIO;
388 if (devs) {
389 adb_dev_map = devs;
390 pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
391 adb_dev_map >> 8, adb_dev_map);
392 pmu_adb_flags = 2;
393 } else {
394 pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
395 pmu_adb_flags = 0;
397 while (!req.complete)
398 pmu_poll();
399 return 0;
402 /* Reset the ADB bus */
403 static int
404 pmu_reset_bus(void)
406 struct adb_request req;
407 long timeout;
408 int save_autopoll = adb_dev_map;
410 if (!pmu_fully_inited) return -ENXIO;
412 /* anyone got a better idea?? */
413 pmu_autopoll(0);
415 req.nbytes = 5;
416 req.done = NULL;
417 req.data[0] = PMU_ADB_CMD;
418 req.data[1] = 0;
419 req.data[2] = 3; /* ADB_BUSRESET ??? */
420 req.data[3] = 0;
421 req.data[4] = 0;
422 req.reply_len = 0;
423 req.reply_expected = 1;
424 if (pmu_queue_request(&req) != 0)
426 printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
427 return -EIO;
429 while (!req.complete)
430 pmu_poll();
431 timeout = 100000;
432 while (!req.complete) {
433 if (--timeout < 0) {
434 printk(KERN_ERR "pmu_adb_reset_bus (reset): no response from PMU\n");
435 return -EIO;
437 udelay(10);
438 pmu_poll();
441 if (save_autopoll != 0)
442 pmu_autopoll(save_autopoll);
444 return 0;
447 /* Construct and send a pmu request */
448 int
449 pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
450 int nbytes, ...)
452 va_list list;
453 int i;
455 if (nbytes < 0 || nbytes > 32) {
456 printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
457 req->complete = 1;
458 return -EINVAL;
460 req->nbytes = nbytes;
461 req->done = done;
462 va_start(list, nbytes);
463 for (i = 0; i < nbytes; ++i)
464 req->data[i] = va_arg(list, int);
465 va_end(list);
466 if (pmu_data_len[req->data[0]][1] != 0) {
467 req->reply[0] = ADB_RET_OK;
468 req->reply_len = 1;
469 } else
470 req->reply_len = 0;
471 req->reply_expected = 0;
472 return pmu_queue_request(req);
476 pmu_queue_request(struct adb_request *req)
478 unsigned long flags;
479 int nsend;
481 if (req->nbytes <= 0) {
482 req->complete = 1;
483 return 0;
485 nsend = pmu_data_len[req->data[0]][0];
486 if (nsend >= 0 && req->nbytes != nsend + 1) {
487 req->complete = 1;
488 return -EINVAL;
491 req->next = NULL;
492 req->sent = 0;
493 req->complete = 0;
494 local_irq_save(flags);
496 if (current_req != 0) {
497 last_req->next = req;
498 last_req = req;
499 } else {
500 current_req = req;
501 last_req = req;
502 if (pmu_state == idle)
503 pmu_start();
506 local_irq_restore(flags);
507 return 0;
510 static void
511 send_byte(int x)
513 via1[ACR] |= SR_CTRL;
514 via1[SR] = x;
515 via2[B] &= ~TREQ; /* assert TREQ */
518 static void
519 recv_byte(void)
521 char c;
523 via1[ACR] = (via1[ACR] | SR_EXT) & ~SR_OUT;
524 c = via1[SR]; /* resets SR */
525 via2[B] &= ~TREQ;
528 static void
529 pmu_start(void)
531 unsigned long flags;
532 struct adb_request *req;
534 /* assert pmu_state == idle */
535 /* get the packet to send */
536 local_irq_save(flags);
537 req = current_req;
538 if (req == 0 || pmu_state != idle
539 || (req->reply_expected && req_awaiting_reply))
540 goto out;
542 pmu_state = sending;
543 data_index = 1;
544 data_len = pmu_data_len[req->data[0]][0];
546 /* set the shift register to shift out and send a byte */
547 send_byte(req->data[0]);
549 out:
550 local_irq_restore(flags);
553 void
554 pmu_poll(void)
556 unsigned long flags;
558 local_irq_save(flags);
559 if (via1[IFR] & SR_INT) {
560 via1[IFR] = SR_INT;
561 pmu_interrupt(IRQ_MAC_ADB_SR, NULL);
563 if (via1[IFR] & CB1_INT) {
564 via1[IFR] = CB1_INT;
565 pmu_interrupt(IRQ_MAC_ADB_CL, NULL);
567 local_irq_restore(flags);
570 static irqreturn_t
571 pmu_interrupt(int irq, void *dev_id)
573 struct adb_request *req;
574 int timeout, bite = 0; /* to prevent compiler warning */
576 #if 0
577 printk("pmu_interrupt: irq %d state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
578 irq, pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
579 #endif
581 if (irq == IRQ_MAC_ADB_CL) { /* CB1 interrupt */
582 adb_int_pending = 1;
583 } else if (irq == IRQ_MAC_ADB_SR) { /* SR interrupt */
584 if (via2[B] & TACK) {
585 printk(KERN_DEBUG "PMU: SR_INT but ack still high! (%x)\n", via2[B]);
588 /* if reading grab the byte */
589 if ((via1[ACR] & SR_OUT) == 0) bite = via1[SR];
591 /* reset TREQ and wait for TACK to go high */
592 via2[B] |= TREQ;
593 timeout = 3200;
594 while (!(via2[B] & TACK)) {
595 if (--timeout < 0) {
596 printk(KERN_ERR "PMU not responding (!ack)\n");
597 goto finish;
599 udelay(10);
602 switch (pmu_state) {
603 case sending:
604 req = current_req;
605 if (data_len < 0) {
606 data_len = req->nbytes - 1;
607 send_byte(data_len);
608 break;
610 if (data_index <= data_len) {
611 send_byte(req->data[data_index++]);
612 break;
614 req->sent = 1;
615 data_len = pmu_data_len[req->data[0]][1];
616 if (data_len == 0) {
617 pmu_state = idle;
618 current_req = req->next;
619 if (req->reply_expected)
620 req_awaiting_reply = req;
621 else
622 pmu_done(req);
623 } else {
624 pmu_state = reading;
625 data_index = 0;
626 reply_ptr = req->reply + req->reply_len;
627 recv_byte();
629 break;
631 case intack:
632 data_index = 0;
633 data_len = -1;
634 pmu_state = reading_intr;
635 reply_ptr = interrupt_data;
636 recv_byte();
637 break;
639 case reading:
640 case reading_intr:
641 if (data_len == -1) {
642 data_len = bite;
643 if (bite > 32)
644 printk(KERN_ERR "PMU: bad reply len %d\n",
645 bite);
646 } else {
647 reply_ptr[data_index++] = bite;
649 if (data_index < data_len) {
650 recv_byte();
651 break;
654 if (pmu_state == reading_intr) {
655 pmu_handle_data(interrupt_data, data_index);
656 } else {
657 req = current_req;
658 current_req = req->next;
659 req->reply_len += data_index;
660 pmu_done(req);
662 pmu_state = idle;
664 break;
666 default:
667 printk(KERN_ERR "pmu_interrupt: unknown state %d?\n",
668 pmu_state);
671 finish:
672 if (pmu_state == idle) {
673 if (adb_int_pending) {
674 pmu_state = intack;
675 send_byte(PMU_INT_ACK);
676 adb_int_pending = 0;
677 } else if (current_req) {
678 pmu_start();
682 #if 0
683 printk("pmu_interrupt: exit state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
684 pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
685 #endif
686 return IRQ_HANDLED;
689 static void
690 pmu_done(struct adb_request *req)
692 req->complete = 1;
693 if (req->done)
694 (*req->done)(req);
697 /* Interrupt data could be the result data from an ADB cmd */
698 static void
699 pmu_handle_data(unsigned char *data, int len)
701 static int show_pmu_ints = 1;
703 asleep = 0;
704 if (len < 1) {
705 adb_int_pending = 0;
706 return;
708 if (data[0] & PMU_INT_ADB) {
709 if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
710 struct adb_request *req = req_awaiting_reply;
711 if (req == 0) {
712 printk(KERN_ERR "PMU: extra ADB reply\n");
713 return;
715 req_awaiting_reply = NULL;
716 if (len <= 2)
717 req->reply_len = 0;
718 else {
719 memcpy(req->reply, data + 1, len - 1);
720 req->reply_len = len - 1;
722 pmu_done(req);
723 } else {
724 adb_input(data+1, len-1, 1);
726 } else {
727 if (data[0] == 0x08 && len == 3) {
728 /* sound/brightness buttons pressed */
729 pmu_set_brightness(data[1] >> 3);
730 set_volume(data[2]);
731 } else if (show_pmu_ints
732 && !(data[0] == PMU_INT_TICK && len == 1)) {
733 int i;
734 printk(KERN_DEBUG "pmu intr");
735 for (i = 0; i < len; ++i)
736 printk(" %.2x", data[i]);
737 printk("\n");
742 static int backlight_level = -1;
743 static int backlight_enabled = 0;
745 #define LEVEL_TO_BRIGHT(lev) ((lev) < 1? 0x7f: 0x4a - ((lev) << 1))
747 static void
748 pmu_enable_backlight(int on)
750 struct adb_request req;
752 if (on) {
753 /* first call: get current backlight value */
754 if (backlight_level < 0) {
755 switch(pmu_kind) {
756 case PMU_68K_V1:
757 case PMU_68K_V2:
758 pmu_request(&req, NULL, 3, PMU_READ_NVRAM, 0x14, 0xe);
759 while (!req.complete)
760 pmu_poll();
761 printk(KERN_DEBUG "pmu: nvram returned bright: %d\n", (int)req.reply[1]);
762 backlight_level = req.reply[1];
763 break;
764 default:
765 backlight_enabled = 0;
766 return;
769 pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
770 LEVEL_TO_BRIGHT(backlight_level));
771 while (!req.complete)
772 pmu_poll();
774 pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
775 PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
776 while (!req.complete)
777 pmu_poll();
778 backlight_enabled = on;
781 static void
782 pmu_set_brightness(int level)
784 int bright;
786 backlight_level = level;
787 bright = LEVEL_TO_BRIGHT(level);
788 if (!backlight_enabled)
789 return;
790 if (bright_req_1.complete)
791 pmu_request(&bright_req_1, NULL, 2, PMU_BACKLIGHT_BRIGHT,
792 bright);
793 if (bright_req_2.complete)
794 pmu_request(&bright_req_2, NULL, 2, PMU_POWER_CTRL,
795 PMU_POW_BACKLIGHT | (bright < 0x7f ? PMU_POW_ON : PMU_POW_OFF));
798 void
799 pmu_enable_irled(int on)
801 struct adb_request req;
803 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
804 (on ? PMU_POW_ON : PMU_POW_OFF));
805 while (!req.complete)
806 pmu_poll();
809 static void
810 set_volume(int level)
815 pmu_present(void)
817 return (pmu_kind != PMU_UNKNOWN);