2 * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved
3 * 1999/2000 Mike Phillips (mikep@linuxtr.net)
5 * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic
8 * Base Driver Skeleton:
9 * Written 1993-94 by Donald Becker.
11 * Copyright 1993 United States Government as represented by the
12 * Director, National Security Agency.
14 * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their
15 * assistance and perserverance with the testing of this driver.
17 * This software may be used and distributed according to the terms
18 * of the GNU General Public License, incorporated herein by reference.
20 * 4/27/99 - Alpha Release 0.1.0
21 * First release to the public
23 * 6/8/99 - Official Release 0.2.0
24 * Merged into the kernel code
25 * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci
26 * resource. Driver also reports the card name returned by
28 * 1/11/00 - Added spinlocks for smp
29 * 2/23/00 - Updated to dev_kfree_irq
30 * 3/10/00 - Fixed FDX enable which triggered other bugs also
32 * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes.
33 * The odd thing about the changes is that the fix for
34 * endian issues with the big-endian data in the arb, asb...
35 * was to always swab() the bytes, no matter what CPU.
36 * That's because the read[wl]() functions always swap the
37 * bytes on the way in on PPC.
38 * Fixing the hardware descriptors was another matter,
39 * because they weren't going through read[wl](), there all
40 * the results had to be in memory in le32 values. kdaaker
42 * 12/23/00 - Added minimal Cardbus support (Thanks Donald).
44 * 03/09/01 - Add new pci api, dev_base_lock, general clean up.
46 * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev
47 * Change proc_fs behaviour, now one entry per adapter.
49 * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the
50 * adapter when live does not take the system down with it.
52 * 06/02/01 - Clean up, copy skb for small packets
54 * 06/22/01 - Add EISR error handling routines
56 * 07/19/01 - Improve bad LAA reporting, strip out freemem
57 * into a separate function, its called from 3
58 * different places now.
59 * 02/09/02 - Replaced sleep_on.
60 * 03/01/02 - Replace access to several registers from 32 bit to
61 * 16 bit. Fixes alignment errors on PPC 64 bit machines.
62 * Thanks to Al Trautman for this one.
63 * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was
64 * silently ignored until the error checking code
65 * went into version 1.0.0
66 * 06/04/02 - Add correct start up sequence for the cardbus adapters.
67 * Required for strict compliance with pci power mgmt specs.
72 * If Problems do Occur
73 * Most problems can be rectified by either closing and opening the interface
74 * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult
75 * if compiled into the kernel).
78 /* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */
80 #define OLYMPIC_DEBUG 0
83 #include <linux/module.h>
84 #include <linux/kernel.h>
85 #include <linux/errno.h>
86 #include <linux/timer.h>
88 #include <linux/ioport.h>
89 #include <linux/string.h>
90 #include <linux/proc_fs.h>
91 #include <linux/ptrace.h>
92 #include <linux/skbuff.h>
93 #include <linux/interrupt.h>
94 #include <linux/delay.h>
95 #include <linux/netdevice.h>
96 #include <linux/trdevice.h>
97 #include <linux/stddef.h>
98 #include <linux/init.h>
99 #include <linux/pci.h>
100 #include <linux/spinlock.h>
101 #include <linux/bitops.h>
102 #include <linux/jiffies.h>
104 #include <net/checksum.h>
105 #include <net/net_namespace.h>
108 #include <asm/system.h>
112 /* I've got to put some intelligence into the version number so that Peter and I know
113 * which version of the code somebody has got.
114 * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author.
115 * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike
117 * Official releases will only have an a.b.c version number format.
120 static char version
[] =
121 "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ;
123 static char *open_maj_error
[] = {"No error", "Lobe Media Test", "Physical Insertion",
124 "Address Verification", "Neighbor Notification (Ring Poll)",
125 "Request Parameters","FDX Registration Request",
126 "FDX Duplicate Address Check", "Station registration Query Wait",
129 static char *open_min_error
[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault",
130 "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing",
131 "Duplicate Node Address","Request Parameters","Remove Received",
132 "Reserved", "Reserved", "No Monitor Detected for RPL",
133 "Monitor Contention failer for RPL", "FDX Protocol Error"};
135 /* Module parameters */
137 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
138 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
140 /* Ring Speed 0,4,16,100
142 * 4,16 = Selected speed only, no autosense
143 * This allows the card to be the first on the ring
144 * and become the active monitor.
145 * 100 = Nothing at present, 100mbps is autodetected
146 * if FDX is turned on. May be implemented in the future to
147 * fail if 100mpbs is not detected.
149 * WARNING: Some hubs will allow you to insert
153 static int ringspeed
[OLYMPIC_MAX_ADAPTERS
] = {0,} ;
154 module_param_array(ringspeed
, int, NULL
, 0);
156 /* Packet buffer size */
158 static int pkt_buf_sz
[OLYMPIC_MAX_ADAPTERS
] = {0,} ;
159 module_param_array(pkt_buf_sz
, int, NULL
, 0) ;
163 static int message_level
[OLYMPIC_MAX_ADAPTERS
] = {0,} ;
164 module_param_array(message_level
, int, NULL
, 0) ;
166 /* Change network_monitor to receive mac frames through the arb channel.
167 * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr
168 * device, i.e. tr0, tr1 etc.
169 * Intended to be used to create a ring-error reporting network module
170 * i.e. it will give you the source address of beaconers on the ring
172 static int network_monitor
[OLYMPIC_MAX_ADAPTERS
] = {0,};
173 module_param_array(network_monitor
, int, NULL
, 0);
175 static struct pci_device_id olympic_pci_tbl
[] = {
176 {PCI_VENDOR_ID_IBM
,PCI_DEVICE_ID_IBM_TR_WAKE
,PCI_ANY_ID
,PCI_ANY_ID
,},
177 { } /* Terminating Entry */
179 MODULE_DEVICE_TABLE(pci
,olympic_pci_tbl
) ;
182 static int olympic_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
183 static int olympic_init(struct net_device
*dev
);
184 static int olympic_open(struct net_device
*dev
);
185 static netdev_tx_t
olympic_xmit(struct sk_buff
*skb
,
186 struct net_device
*dev
);
187 static int olympic_close(struct net_device
*dev
);
188 static void olympic_set_rx_mode(struct net_device
*dev
);
189 static void olympic_freemem(struct net_device
*dev
) ;
190 static irqreturn_t
olympic_interrupt(int irq
, void *dev_id
);
191 static int olympic_set_mac_address(struct net_device
*dev
, void *addr
) ;
192 static void olympic_arb_cmd(struct net_device
*dev
);
193 static int olympic_change_mtu(struct net_device
*dev
, int mtu
);
194 static void olympic_srb_bh(struct net_device
*dev
) ;
195 static void olympic_asb_bh(struct net_device
*dev
) ;
196 static int olympic_proc_info(char *buffer
, char **start
, off_t offset
, int length
, int *eof
, void *data
) ;
198 static const struct net_device_ops olympic_netdev_ops
= {
199 .ndo_open
= olympic_open
,
200 .ndo_stop
= olympic_close
,
201 .ndo_start_xmit
= olympic_xmit
,
202 .ndo_change_mtu
= olympic_change_mtu
,
203 .ndo_set_multicast_list
= olympic_set_rx_mode
,
204 .ndo_set_mac_address
= olympic_set_mac_address
,
207 static int __devinit
olympic_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
209 struct net_device
*dev
;
210 struct olympic_private
*olympic_priv
;
211 static int card_no
= -1 ;
216 if ((i
= pci_enable_device(pdev
))) {
220 pci_set_master(pdev
);
222 if ((i
= pci_request_regions(pdev
,"olympic"))) {
226 dev
= alloc_trdev(sizeof(struct olympic_private
)) ;
232 olympic_priv
= netdev_priv(dev
) ;
234 spin_lock_init(&olympic_priv
->olympic_lock
) ;
236 init_waitqueue_head(&olympic_priv
->srb_wait
);
237 init_waitqueue_head(&olympic_priv
->trb_wait
);
239 printk(KERN_INFO
"pci_device: %p, dev:%p, dev->priv: %p\n", pdev
, dev
, netdev_priv(dev
));
242 dev
->base_addr
=pci_resource_start(pdev
, 0);
243 olympic_priv
->olympic_card_name
= pci_name(pdev
);
244 olympic_priv
->pdev
= pdev
;
245 olympic_priv
->olympic_mmio
= ioremap(pci_resource_start(pdev
,1),256);
246 olympic_priv
->olympic_lap
= ioremap(pci_resource_start(pdev
,2),2048);
247 if (!olympic_priv
->olympic_mmio
|| !olympic_priv
->olympic_lap
) {
251 if ((pkt_buf_sz
[card_no
] < 100) || (pkt_buf_sz
[card_no
] > 18000) )
252 olympic_priv
->pkt_buf_sz
= PKT_BUF_SZ
;
254 olympic_priv
->pkt_buf_sz
= pkt_buf_sz
[card_no
] ;
256 dev
->mtu
= olympic_priv
->pkt_buf_sz
- TR_HLEN
;
257 olympic_priv
->olympic_ring_speed
= ringspeed
[card_no
] ;
258 olympic_priv
->olympic_message_level
= message_level
[card_no
] ;
259 olympic_priv
->olympic_network_monitor
= network_monitor
[card_no
];
261 if ((i
= olympic_init(dev
))) {
265 dev
->netdev_ops
= &olympic_netdev_ops
;
266 SET_NETDEV_DEV(dev
, &pdev
->dev
);
268 pci_set_drvdata(pdev
,dev
) ;
269 register_netdev(dev
) ;
270 printk("Olympic: %s registered as: %s\n",olympic_priv
->olympic_card_name
,dev
->name
);
271 if (olympic_priv
->olympic_network_monitor
) { /* Must go after register_netdev as we need the device name */
273 strcpy(proc_name
,"olympic_") ;
274 strcat(proc_name
,dev
->name
) ;
275 create_proc_read_entry(proc_name
,0,init_net
.proc_net
,olympic_proc_info
,(void *)dev
) ;
276 printk("Olympic: Network Monitor information: /proc/%s\n",proc_name
);
281 if (olympic_priv
->olympic_mmio
)
282 iounmap(olympic_priv
->olympic_mmio
);
283 if (olympic_priv
->olympic_lap
)
284 iounmap(olympic_priv
->olympic_lap
);
288 pci_release_regions(pdev
);
291 pci_disable_device(pdev
);
295 static int olympic_init(struct net_device
*dev
)
297 struct olympic_private
*olympic_priv
;
298 u8 __iomem
*olympic_mmio
, *init_srb
,*adapter_addr
;
300 unsigned int uaa_addr
;
302 olympic_priv
=netdev_priv(dev
);
303 olympic_mmio
=olympic_priv
->olympic_mmio
;
305 printk("%s \n", version
);
306 printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv
->olympic_card_name
, (unsigned int) dev
->base_addr
,olympic_priv
->olympic_mmio
, olympic_priv
->olympic_lap
, dev
->irq
);
308 writel(readl(olympic_mmio
+BCTL
) | BCTL_SOFTRESET
,olympic_mmio
+BCTL
);
310 while((readl(olympic_mmio
+BCTL
)) & BCTL_SOFTRESET
) {
312 if(time_after(jiffies
, t
+ 40*HZ
)) {
313 printk(KERN_ERR
"IBM PCI tokenring card not responding.\n");
319 /* Needed for cardbus */
320 if(!(readl(olympic_mmio
+BCTL
) & BCTL_MODE_INDICATOR
)) {
321 writel(readl(olympic_priv
->olympic_mmio
+FERMASK
)|FERMASK_INT_BIT
, olympic_mmio
+FERMASK
);
325 printk("BCTL: %x\n",readl(olympic_mmio
+BCTL
));
326 printk("GPR: %x\n",readw(olympic_mmio
+GPR
));
327 printk("SISRMASK: %x\n",readl(olympic_mmio
+SISR_MASK
));
329 /* Aaaahhh, You have got to be real careful setting GPR, the card
330 holds the previous values from flash memory, including autosense
333 writel(readl(olympic_mmio
+BCTL
)|BCTL_MIMREB
,olympic_mmio
+BCTL
);
335 if (olympic_priv
->olympic_ring_speed
== 0) { /* Autosense */
336 writew(readw(olympic_mmio
+GPR
)|GPR_AUTOSENSE
,olympic_mmio
+GPR
);
337 if (olympic_priv
->olympic_message_level
)
338 printk(KERN_INFO
"%s: Ringspeed autosense mode on\n",olympic_priv
->olympic_card_name
);
339 } else if (olympic_priv
->olympic_ring_speed
== 16) {
340 if (olympic_priv
->olympic_message_level
)
341 printk(KERN_INFO
"%s: Trying to open at 16 Mbps as requested\n", olympic_priv
->olympic_card_name
);
342 writew(GPR_16MBPS
, olympic_mmio
+GPR
);
343 } else if (olympic_priv
->olympic_ring_speed
== 4) {
344 if (olympic_priv
->olympic_message_level
)
345 printk(KERN_INFO
"%s: Trying to open at 4 Mbps as requested\n", olympic_priv
->olympic_card_name
) ;
346 writew(0, olympic_mmio
+GPR
);
349 writew(readw(olympic_mmio
+GPR
)|GPR_NEPTUNE_BF
,olympic_mmio
+GPR
);
352 printk("GPR = %x\n",readw(olympic_mmio
+ GPR
) ) ;
354 /* Solo has been paused to meet the Cardbus power
355 * specs if the adapter is cardbus. Check to
356 * see its been paused and then restart solo. The
357 * adapter should set the pause bit within 1 second.
360 if(!(readl(olympic_mmio
+BCTL
) & BCTL_MODE_INDICATOR
)) {
362 while (!(readl(olympic_mmio
+CLKCTL
) & CLKCTL_PAUSE
)) {
364 if(time_after(jiffies
, t
+ 2*HZ
)) {
365 printk(KERN_ERR
"IBM Cardbus tokenring adapter not responsing.\n") ;
369 writel(readl(olympic_mmio
+CLKCTL
) & ~CLKCTL_PAUSE
, olympic_mmio
+CLKCTL
) ;
372 /* start solo init */
373 writel((1<<15),olympic_mmio
+SISR_MASK_SUM
);
376 while(!((readl(olympic_mmio
+SISR_RR
)) & SISR_SRB_REPLY
)) {
378 if(time_after(jiffies
, t
+ 15*HZ
)) {
379 printk(KERN_ERR
"IBM PCI tokenring card not responding.\n");
384 writel(readw(olympic_mmio
+LAPWWO
),olympic_mmio
+LAPA
);
387 printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio
+LAPWWO
), readl(olympic_mmio
+LAPA
));
390 init_srb
=olympic_priv
->olympic_lap
+ ((readw(olympic_mmio
+LAPWWO
)) & (~0xf800));
395 printk("init_srb(%p): ",init_srb
);
397 printk("%x ",readb(init_srb
+i
));
401 if(readw(init_srb
+6)) {
402 printk(KERN_INFO
"tokenring card initialization failed. errorcode : %x\n",readw(init_srb
+6));
406 if (olympic_priv
->olympic_message_level
) {
407 if ( readb(init_srb
+2) & 0x40) {
408 printk(KERN_INFO
"Olympic: Adapter is FDX capable.\n") ;
410 printk(KERN_INFO
"Olympic: Adapter cannot do FDX.\n");
414 uaa_addr
=swab16(readw(init_srb
+8));
417 printk("UAA resides at %x\n",uaa_addr
);
420 writel(uaa_addr
,olympic_mmio
+LAPA
);
421 adapter_addr
=olympic_priv
->olympic_lap
+ (uaa_addr
& (~0xf800));
423 memcpy_fromio(&dev
->dev_addr
[0], adapter_addr
,6);
426 printk("adapter address: %pM\n", dev
->dev_addr
);
429 olympic_priv
->olympic_addr_table_addr
= swab16(readw(init_srb
+ 12));
430 olympic_priv
->olympic_parms_addr
= swab16(readw(init_srb
+ 14));
436 static int olympic_open(struct net_device
*dev
)
438 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
439 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
,*init_srb
;
440 unsigned long flags
, t
;
441 int i
, open_finished
= 1 ;
444 DECLARE_WAITQUEUE(wait
,current
) ;
448 if(request_irq(dev
->irq
, &olympic_interrupt
, IRQF_SHARED
, "olympic", dev
)) {
453 printk("BMCTL: %x\n",readl(olympic_mmio
+BMCTL_SUM
));
454 printk("pending ints: %x\n",readl(olympic_mmio
+SISR_RR
));
457 writel(SISR_MI
,olympic_mmio
+SISR_MASK_SUM
);
459 writel(SISR_MI
| SISR_SRB_REPLY
, olympic_mmio
+SISR_MASK
); /* more ints later, doesn't stop arb cmd interrupt */
461 writel(LISR_LIE
,olympic_mmio
+LISR
); /* more ints later */
463 /* adapter is closed, so SRB is pointed to by LAPWWO */
465 writel(readw(olympic_mmio
+LAPWWO
),olympic_mmio
+LAPA
);
466 init_srb
=olympic_priv
->olympic_lap
+ ((readw(olympic_mmio
+LAPWWO
)) & (~0xf800));
469 printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio
+LAPWWO
), readl(olympic_mmio
+LAPA
));
470 printk("SISR Mask = %04x\n", readl(olympic_mmio
+SISR_MASK
));
471 printk("Before the open command \n");
474 memset_io(init_srb
,0,SRB_COMMAND_SIZE
);
476 writeb(SRB_OPEN_ADAPTER
,init_srb
) ; /* open */
477 writeb(OLYMPIC_CLEAR_RET_CODE
,init_srb
+2);
479 /* If Network Monitor, instruct card to copy MAC frames through the ARB */
480 if (olympic_priv
->olympic_network_monitor
)
481 writew(swab16(OPEN_ADAPTER_ENABLE_FDX
| OPEN_ADAPTER_PASS_ADC_MAC
| OPEN_ADAPTER_PASS_ATT_MAC
| OPEN_ADAPTER_PASS_BEACON
), init_srb
+8);
483 writew(swab16(OPEN_ADAPTER_ENABLE_FDX
), init_srb
+8);
485 /* Test OR of first 3 bytes as its totally possible for
486 * someone to set the first 2 bytes to be zero, although this
487 * is an error, the first byte must have bit 6 set to 1 */
489 if (olympic_priv
->olympic_laa
[0] | olympic_priv
->olympic_laa
[1] | olympic_priv
->olympic_laa
[2]) {
490 writeb(olympic_priv
->olympic_laa
[0],init_srb
+12);
491 writeb(olympic_priv
->olympic_laa
[1],init_srb
+13);
492 writeb(olympic_priv
->olympic_laa
[2],init_srb
+14);
493 writeb(olympic_priv
->olympic_laa
[3],init_srb
+15);
494 writeb(olympic_priv
->olympic_laa
[4],init_srb
+16);
495 writeb(olympic_priv
->olympic_laa
[5],init_srb
+17);
496 memcpy(dev
->dev_addr
,olympic_priv
->olympic_laa
,dev
->addr_len
) ;
498 writeb(1,init_srb
+30);
500 spin_lock_irqsave(&olympic_priv
->olympic_lock
,flags
);
501 olympic_priv
->srb_queued
=1;
503 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
504 spin_unlock_irqrestore(&olympic_priv
->olympic_lock
,flags
);
508 add_wait_queue(&olympic_priv
->srb_wait
,&wait
) ;
509 set_current_state(TASK_INTERRUPTIBLE
) ;
511 while(olympic_priv
->srb_queued
) {
513 if(signal_pending(current
)) {
514 printk(KERN_WARNING
"%s: Signal received in open.\n",
516 printk(KERN_WARNING
"SISR=%x LISR=%x\n",
517 readl(olympic_mmio
+SISR
),
518 readl(olympic_mmio
+LISR
));
519 olympic_priv
->srb_queued
=0;
522 if (time_after(jiffies
, t
+ 10*HZ
)) {
523 printk(KERN_WARNING
"%s: SRB timed out. \n",dev
->name
) ;
524 olympic_priv
->srb_queued
=0;
527 set_current_state(TASK_INTERRUPTIBLE
) ;
529 remove_wait_queue(&olympic_priv
->srb_wait
,&wait
) ;
530 set_current_state(TASK_RUNNING
) ;
531 olympic_priv
->srb_queued
= 0 ;
533 printk("init_srb(%p): ",init_srb
);
535 printk("%02x ",readb(init_srb
+i
));
539 /* If we get the same return response as we set, the interrupt wasn't raised and the open
543 switch (resp
= readb(init_srb
+2)) {
544 case OLYMPIC_CLEAR_RET_CODE
:
545 printk(KERN_WARNING
"%s: Adapter Open time out or error.\n", dev
->name
) ;
551 if (!olympic_priv
->olympic_ring_speed
&& open_finished
) { /* Autosense , first time around */
552 printk(KERN_WARNING
"%s: Retrying at different ring speed \n", dev
->name
);
557 err
= readb(init_srb
+7);
559 if (!olympic_priv
->olympic_ring_speed
&& ((err
& 0x0f) == 0x0d)) {
560 printk(KERN_WARNING
"%s: Tried to autosense ring speed with no monitors present\n",dev
->name
);
561 printk(KERN_WARNING
"%s: Please try again with a specified ring speed \n",dev
->name
);
563 printk(KERN_WARNING
"%s: %s - %s\n", dev
->name
,
564 open_maj_error
[(err
& 0xf0) >> 4],
565 open_min_error
[(err
& 0x0f)]);
570 printk(KERN_WARNING
"%s: Invalid LAA: %pM\n",
571 dev
->name
, olympic_priv
->olympic_laa
);
575 printk(KERN_WARNING
"%s: Bad OPEN response: %x\n", dev
->name
, resp
);
579 } while (!(open_finished
)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */
581 if (readb(init_srb
+18) & (1<<3))
582 if (olympic_priv
->olympic_message_level
)
583 printk(KERN_INFO
"%s: Opened in FDX Mode\n",dev
->name
);
585 if (readb(init_srb
+18) & (1<<1))
586 olympic_priv
->olympic_ring_speed
= 100 ;
587 else if (readb(init_srb
+18) & 1)
588 olympic_priv
->olympic_ring_speed
= 16 ;
590 olympic_priv
->olympic_ring_speed
= 4 ;
592 if (olympic_priv
->olympic_message_level
)
593 printk(KERN_INFO
"%s: Opened in %d Mbps mode\n",dev
->name
, olympic_priv
->olympic_ring_speed
);
595 olympic_priv
->asb
= swab16(readw(init_srb
+8));
596 olympic_priv
->srb
= swab16(readw(init_srb
+10));
597 olympic_priv
->arb
= swab16(readw(init_srb
+12));
598 olympic_priv
->trb
= swab16(readw(init_srb
+16));
600 olympic_priv
->olympic_receive_options
= 0x01 ;
601 olympic_priv
->olympic_copy_all_options
= 0 ;
605 writel((3<<16),olympic_mmio
+BMCTL_RWM
); /* Ensure end of frame generated interrupts */
607 writel(BMCTL_RX_DIS
|3,olympic_mmio
+BMCTL_RWM
); /* Yes, this the enables RX channel */
609 for(i
=0;i
<OLYMPIC_RX_RING_SIZE
;i
++) {
613 skb
=dev_alloc_skb(olympic_priv
->pkt_buf_sz
);
619 olympic_priv
->olympic_rx_ring
[i
].buffer
= cpu_to_le32(pci_map_single(olympic_priv
->pdev
,
620 skb
->data
,olympic_priv
->pkt_buf_sz
, PCI_DMA_FROMDEVICE
)) ;
621 olympic_priv
->olympic_rx_ring
[i
].res_length
= cpu_to_le32(olympic_priv
->pkt_buf_sz
);
622 olympic_priv
->rx_ring_skb
[i
]=skb
;
626 printk(KERN_WARNING
"%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev
->name
);
630 olympic_priv
->rx_ring_dma_addr
= pci_map_single(olympic_priv
->pdev
,olympic_priv
->olympic_rx_ring
,
631 sizeof(struct olympic_rx_desc
) * OLYMPIC_RX_RING_SIZE
, PCI_DMA_TODEVICE
);
632 writel(olympic_priv
->rx_ring_dma_addr
, olympic_mmio
+RXDESCQ
);
633 writel(olympic_priv
->rx_ring_dma_addr
, olympic_mmio
+RXCDA
);
634 writew(i
, olympic_mmio
+RXDESCQCNT
);
636 olympic_priv
->rx_status_ring_dma_addr
= pci_map_single(olympic_priv
->pdev
, olympic_priv
->olympic_rx_status_ring
,
637 sizeof(struct olympic_rx_status
) * OLYMPIC_RX_RING_SIZE
, PCI_DMA_FROMDEVICE
);
638 writel(olympic_priv
->rx_status_ring_dma_addr
, olympic_mmio
+RXSTATQ
);
639 writel(olympic_priv
->rx_status_ring_dma_addr
, olympic_mmio
+RXCSA
);
641 olympic_priv
->rx_ring_last_received
= OLYMPIC_RX_RING_SIZE
- 1; /* last processed rx status */
642 olympic_priv
->rx_status_last_received
= OLYMPIC_RX_RING_SIZE
- 1;
644 writew(i
, olympic_mmio
+RXSTATQCNT
);
647 printk("# of rx buffers: %d, RXENQ: %x\n",i
, readw(olympic_mmio
+RXENQ
));
648 printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio
+RXCSA
),&olympic_priv
->olympic_rx_status_ring
[0]);
649 printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv
->olympic_rx_status_ring
[1]), &(olympic_priv
->olympic_rx_status_ring
[2]), &(olympic_priv
->olympic_rx_status_ring
[3]) );
650 printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv
->olympic_rx_status_ring
[4]), &(olympic_priv
->olympic_rx_status_ring
[5]), &(olympic_priv
->olympic_rx_status_ring
[6]) );
651 printk(" stat_ring[7]: %p\n", &(olympic_priv
->olympic_rx_status_ring
[7]) );
653 printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio
+RXCDA
),&olympic_priv
->olympic_rx_ring
[0]);
654 printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n",
655 olympic_priv
->rx_ring_dma_addr
,olympic_priv
->rx_status_ring_dma_addr
) ;
658 writew((((readw(olympic_mmio
+RXENQ
)) & 0x8000) ^ 0x8000) | i
,olympic_mmio
+RXENQ
);
661 printk("# of rx buffers: %d, RXENQ: %x\n",i
, readw(olympic_mmio
+RXENQ
));
662 printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio
+RXCSA
),&olympic_priv
->olympic_rx_status_ring
[0]);
663 printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio
+RXCDA
),&olympic_priv
->olympic_rx_ring
[0]);
666 writel(SISR_RX_STATUS
| SISR_RX_NOBUF
,olympic_mmio
+SISR_MASK_SUM
);
670 writel(BMCTL_TX1_DIS
,olympic_mmio
+BMCTL_RWM
); /* Yes, this enables TX channel 1 */
671 for(i
=0;i
<OLYMPIC_TX_RING_SIZE
;i
++)
672 olympic_priv
->olympic_tx_ring
[i
].buffer
=cpu_to_le32(0xdeadbeef);
674 olympic_priv
->free_tx_ring_entries
=OLYMPIC_TX_RING_SIZE
;
675 olympic_priv
->tx_ring_dma_addr
= pci_map_single(olympic_priv
->pdev
,olympic_priv
->olympic_tx_ring
,
676 sizeof(struct olympic_tx_desc
) * OLYMPIC_TX_RING_SIZE
,PCI_DMA_TODEVICE
) ;
677 writel(olympic_priv
->tx_ring_dma_addr
, olympic_mmio
+TXDESCQ_1
);
678 writel(olympic_priv
->tx_ring_dma_addr
, olympic_mmio
+TXCDA_1
);
679 writew(OLYMPIC_TX_RING_SIZE
, olympic_mmio
+TXDESCQCNT_1
);
681 olympic_priv
->tx_status_ring_dma_addr
= pci_map_single(olympic_priv
->pdev
, olympic_priv
->olympic_tx_status_ring
,
682 sizeof(struct olympic_tx_status
) * OLYMPIC_TX_RING_SIZE
, PCI_DMA_FROMDEVICE
);
683 writel(olympic_priv
->tx_status_ring_dma_addr
,olympic_mmio
+TXSTATQ_1
);
684 writel(olympic_priv
->tx_status_ring_dma_addr
,olympic_mmio
+TXCSA_1
);
685 writew(OLYMPIC_TX_RING_SIZE
,olympic_mmio
+TXSTATQCNT_1
);
687 olympic_priv
->tx_ring_free
=0; /* next entry in tx ring to use */
688 olympic_priv
->tx_ring_last_status
=OLYMPIC_TX_RING_SIZE
-1; /* last processed tx status */
690 writel(0xffffffff, olympic_mmio
+EISR_RWM
) ; /* clean the eisr */
691 writel(0,olympic_mmio
+EISR
) ;
692 writel(EISR_MASK_OPTIONS
,olympic_mmio
+EISR_MASK
) ; /* enables most of the TX error interrupts */
693 writel(SISR_TX1_EOF
| SISR_ADAPTER_CHECK
| SISR_ARB_CMD
| SISR_TRB_REPLY
| SISR_ASB_FREE
| SISR_ERR
,olympic_mmio
+SISR_MASK_SUM
);
696 printk("BMCTL: %x\n",readl(olympic_mmio
+BMCTL_SUM
));
697 printk("SISR MASK: %x\n",readl(olympic_mmio
+SISR_MASK
));
700 if (olympic_priv
->olympic_network_monitor
) {
704 oat
= (olympic_priv
->olympic_lap
+ olympic_priv
->olympic_addr_table_addr
);
705 opt
= (olympic_priv
->olympic_lap
+ olympic_priv
->olympic_parms_addr
);
707 for (i
= 0; i
< 6; i
++)
708 addr
[i
] = readb(oat
+offsetof(struct olympic_adapter_addr_table
,node_addr
)+i
);
709 printk("%s: Node Address: %pM\n", dev
->name
, addr
);
710 printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev
->name
,
711 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)),
712 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+1),
713 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+2),
714 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+3));
716 for (i
= 0; i
< 6; i
++)
717 addr
[i
] = readb(opt
+offsetof(struct olympic_parameters_table
, up_node_addr
)+i
);
718 printk("%s: NAUN Address: %pM\n", dev
->name
, addr
);
721 netif_start_queue(dev
);
725 free_irq(dev
->irq
, dev
);
730 * When we enter the rx routine we do not know how many frames have been
731 * queued on the rx channel. Therefore we start at the next rx status
732 * position and travel around the receive ring until we have completed
735 * This means that we may process the frame before we receive the end
736 * of frame interrupt. This is why we always test the status instead
737 * of blindly processing the next frame.
739 * We also remove the last 4 bytes from the packet as well, these are
740 * just token ring trailer info and upset protocols that don't check
741 * their own length, i.e. SNA.
744 static void olympic_rx(struct net_device
*dev
)
746 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
747 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
;
748 struct olympic_rx_status
*rx_status
;
749 struct olympic_rx_desc
*rx_desc
;
750 int rx_ring_last_received
,length
, buffer_cnt
, cpy_length
, frag_len
;
751 struct sk_buff
*skb
, *skb2
;
754 rx_status
=&(olympic_priv
->olympic_rx_status_ring
[(olympic_priv
->rx_status_last_received
+ 1) & (OLYMPIC_RX_RING_SIZE
- 1)]) ;
756 while (rx_status
->status_buffercnt
) {
757 u32 l_status_buffercnt
;
759 olympic_priv
->rx_status_last_received
++ ;
760 olympic_priv
->rx_status_last_received
&= (OLYMPIC_RX_RING_SIZE
-1);
762 printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status
->status_buffercnt
), le32_to_cpu(rx_status
->fragmentcnt_framelen
));
764 length
= le32_to_cpu(rx_status
->fragmentcnt_framelen
) & 0xffff;
765 buffer_cnt
= le32_to_cpu(rx_status
->status_buffercnt
) & 0xffff;
766 i
= buffer_cnt
; /* Need buffer_cnt later for rxenq update */
767 frag_len
= le32_to_cpu(rx_status
->fragmentcnt_framelen
) >> 16;
770 printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length
, frag_len
, buffer_cnt
);
772 l_status_buffercnt
= le32_to_cpu(rx_status
->status_buffercnt
);
773 if(l_status_buffercnt
& 0xC0000000) {
774 if (l_status_buffercnt
& 0x3B000000) {
775 if (olympic_priv
->olympic_message_level
) {
776 if (l_status_buffercnt
& (1<<29)) /* Rx Frame Truncated */
777 printk(KERN_WARNING
"%s: Rx Frame Truncated \n",dev
->name
);
778 if (l_status_buffercnt
& (1<<28)) /*Rx receive overrun */
779 printk(KERN_WARNING
"%s: Rx Frame Receive overrun \n",dev
->name
);
780 if (l_status_buffercnt
& (1<<27)) /* No receive buffers */
781 printk(KERN_WARNING
"%s: No receive buffers \n",dev
->name
);
782 if (l_status_buffercnt
& (1<<25)) /* Receive frame error detect */
783 printk(KERN_WARNING
"%s: Receive frame error detect \n",dev
->name
);
784 if (l_status_buffercnt
& (1<<24)) /* Received Error Detect */
785 printk(KERN_WARNING
"%s: Received Error Detect \n",dev
->name
);
787 olympic_priv
->rx_ring_last_received
+= i
;
788 olympic_priv
->rx_ring_last_received
&= (OLYMPIC_RX_RING_SIZE
-1) ;
789 dev
->stats
.rx_errors
++;
792 if (buffer_cnt
== 1) {
793 skb
= dev_alloc_skb(max_t(int, olympic_priv
->pkt_buf_sz
,length
)) ;
795 skb
= dev_alloc_skb(length
) ;
799 printk(KERN_WARNING
"%s: Not enough memory to copy packet to upper layers. \n",dev
->name
) ;
800 dev
->stats
.rx_dropped
++;
801 /* Update counters even though we don't transfer the frame */
802 olympic_priv
->rx_ring_last_received
+= i
;
803 olympic_priv
->rx_ring_last_received
&= (OLYMPIC_RX_RING_SIZE
-1) ;
805 /* Optimise based upon number of buffers used.
806 If only one buffer is used we can simply swap the buffers around.
807 If more than one then we must use the new buffer and copy the information
808 first. Ideally all frames would be in a single buffer, this can be tuned by
809 altering the buffer size. If the length of the packet is less than
810 1500 bytes we're going to copy it over anyway to stop packets getting
811 dropped from sockets with buffers smaller than our pkt_buf_sz. */
814 olympic_priv
->rx_ring_last_received
++ ;
815 olympic_priv
->rx_ring_last_received
&= (OLYMPIC_RX_RING_SIZE
-1);
816 rx_ring_last_received
= olympic_priv
->rx_ring_last_received
;
818 skb2
=olympic_priv
->rx_ring_skb
[rx_ring_last_received
] ;
820 pci_unmap_single(olympic_priv
->pdev
,
821 le32_to_cpu(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
),
822 olympic_priv
->pkt_buf_sz
,PCI_DMA_FROMDEVICE
) ;
823 skb_put(skb2
,length
-4);
824 skb2
->protocol
= tr_type_trans(skb2
,dev
);
825 olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
=
826 cpu_to_le32(pci_map_single(olympic_priv
->pdev
, skb
->data
,
827 olympic_priv
->pkt_buf_sz
, PCI_DMA_FROMDEVICE
));
828 olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].res_length
=
829 cpu_to_le32(olympic_priv
->pkt_buf_sz
);
830 olympic_priv
->rx_ring_skb
[rx_ring_last_received
] = skb
;
833 pci_dma_sync_single_for_cpu(olympic_priv
->pdev
,
834 le32_to_cpu(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
),
835 olympic_priv
->pkt_buf_sz
,PCI_DMA_FROMDEVICE
) ;
836 skb_copy_from_linear_data(olympic_priv
->rx_ring_skb
[rx_ring_last_received
],
837 skb_put(skb
,length
- 4),
839 pci_dma_sync_single_for_device(olympic_priv
->pdev
,
840 le32_to_cpu(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
),
841 olympic_priv
->pkt_buf_sz
,PCI_DMA_FROMDEVICE
) ;
842 skb
->protocol
= tr_type_trans(skb
,dev
) ;
846 do { /* Walk the buffers */
847 olympic_priv
->rx_ring_last_received
++ ;
848 olympic_priv
->rx_ring_last_received
&= (OLYMPIC_RX_RING_SIZE
-1);
849 rx_ring_last_received
= olympic_priv
->rx_ring_last_received
;
850 pci_dma_sync_single_for_cpu(olympic_priv
->pdev
,
851 le32_to_cpu(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
),
852 olympic_priv
->pkt_buf_sz
,PCI_DMA_FROMDEVICE
) ;
853 rx_desc
= &(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
]);
854 cpy_length
= (i
== 1 ? frag_len
: le32_to_cpu(rx_desc
->res_length
));
855 skb_copy_from_linear_data(olympic_priv
->rx_ring_skb
[rx_ring_last_received
],
856 skb_put(skb
, cpy_length
),
858 pci_dma_sync_single_for_device(olympic_priv
->pdev
,
859 le32_to_cpu(olympic_priv
->olympic_rx_ring
[rx_ring_last_received
].buffer
),
860 olympic_priv
->pkt_buf_sz
,PCI_DMA_FROMDEVICE
) ;
862 skb_trim(skb
,skb
->len
-4) ;
863 skb
->protocol
= tr_type_trans(skb
,dev
);
866 dev
->stats
.rx_packets
++ ;
867 dev
->stats
.rx_bytes
+= length
;
868 } /* if skb == null */
869 } /* If status & 0x3b */
871 } else { /*if buffercnt & 0xC */
872 olympic_priv
->rx_ring_last_received
+= i
;
873 olympic_priv
->rx_ring_last_received
&= (OLYMPIC_RX_RING_SIZE
- 1) ;
876 rx_status
->fragmentcnt_framelen
= 0 ;
877 rx_status
->status_buffercnt
= 0 ;
878 rx_status
= &(olympic_priv
->olympic_rx_status_ring
[(olympic_priv
->rx_status_last_received
+1) & (OLYMPIC_RX_RING_SIZE
-1) ]);
880 writew((((readw(olympic_mmio
+RXENQ
)) & 0x8000) ^ 0x8000) | buffer_cnt
, olympic_mmio
+RXENQ
);
885 static void olympic_freemem(struct net_device
*dev
)
887 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
890 for(i
=0;i
<OLYMPIC_RX_RING_SIZE
;i
++) {
891 if (olympic_priv
->rx_ring_skb
[olympic_priv
->rx_status_last_received
] != NULL
) {
892 dev_kfree_skb_irq(olympic_priv
->rx_ring_skb
[olympic_priv
->rx_status_last_received
]);
893 olympic_priv
->rx_ring_skb
[olympic_priv
->rx_status_last_received
] = NULL
;
895 if (olympic_priv
->olympic_rx_ring
[olympic_priv
->rx_status_last_received
].buffer
!= cpu_to_le32(0xdeadbeef)) {
896 pci_unmap_single(olympic_priv
->pdev
,
897 le32_to_cpu(olympic_priv
->olympic_rx_ring
[olympic_priv
->rx_status_last_received
].buffer
),
898 olympic_priv
->pkt_buf_sz
, PCI_DMA_FROMDEVICE
);
900 olympic_priv
->rx_status_last_received
++;
901 olympic_priv
->rx_status_last_received
&=OLYMPIC_RX_RING_SIZE
-1;
904 pci_unmap_single(olympic_priv
->pdev
, olympic_priv
->rx_status_ring_dma_addr
,
905 sizeof(struct olympic_rx_status
) * OLYMPIC_RX_RING_SIZE
, PCI_DMA_FROMDEVICE
);
906 pci_unmap_single(olympic_priv
->pdev
, olympic_priv
->rx_ring_dma_addr
,
907 sizeof(struct olympic_rx_desc
) * OLYMPIC_RX_RING_SIZE
, PCI_DMA_TODEVICE
);
909 pci_unmap_single(olympic_priv
->pdev
, olympic_priv
->tx_status_ring_dma_addr
,
910 sizeof(struct olympic_tx_status
) * OLYMPIC_TX_RING_SIZE
, PCI_DMA_FROMDEVICE
);
911 pci_unmap_single(olympic_priv
->pdev
, olympic_priv
->tx_ring_dma_addr
,
912 sizeof(struct olympic_tx_desc
) * OLYMPIC_TX_RING_SIZE
, PCI_DMA_TODEVICE
);
917 static irqreturn_t
olympic_interrupt(int irq
, void *dev_id
)
919 struct net_device
*dev
= (struct net_device
*)dev_id
;
920 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
921 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
;
923 u8 __iomem
*adapter_check_area
;
926 * Read sisr but don't reset it yet.
927 * The indication bit may have been set but the interrupt latch
928 * bit may not be set, so we'd lose the interrupt later.
930 sisr
=readl(olympic_mmio
+SISR
) ;
931 if (!(sisr
& SISR_MI
)) /* Interrupt isn't for us */
933 sisr
=readl(olympic_mmio
+SISR_RR
) ; /* Read & Reset sisr */
935 spin_lock(&olympic_priv
->olympic_lock
);
937 /* Hotswap gives us this on removal */
938 if (sisr
== 0xffffffff) {
939 printk(KERN_WARNING
"%s: Hotswap adapter removal.\n",dev
->name
) ;
940 spin_unlock(&olympic_priv
->olympic_lock
) ;
944 if (sisr
& (SISR_SRB_REPLY
| SISR_TX1_EOF
| SISR_RX_STATUS
| SISR_ADAPTER_CHECK
|
945 SISR_ASB_FREE
| SISR_ARB_CMD
| SISR_TRB_REPLY
| SISR_RX_NOBUF
| SISR_ERR
)) {
947 /* If we ever get this the adapter is seriously dead. Only a reset is going to
948 * bring it back to life. We're talking pci bus errors and such like :( */
949 if((sisr
& SISR_ERR
) && (readl(olympic_mmio
+EISR
) & EISR_MASK_OPTIONS
)) {
950 printk(KERN_ERR
"Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio
+EISR
)) ;
951 printk(KERN_ERR
"The adapter must be reset to clear this condition.\n") ;
952 printk(KERN_ERR
"Please report this error to the driver maintainer and/\n") ;
953 printk(KERN_ERR
"or the linux-tr mailing list.\n") ;
954 wake_up_interruptible(&olympic_priv
->srb_wait
);
955 spin_unlock(&olympic_priv
->olympic_lock
) ;
959 if(sisr
& SISR_SRB_REPLY
) {
960 if(olympic_priv
->srb_queued
==1) {
961 wake_up_interruptible(&olympic_priv
->srb_wait
);
962 } else if (olympic_priv
->srb_queued
==2) {
963 olympic_srb_bh(dev
) ;
965 olympic_priv
->srb_queued
=0;
966 } /* SISR_SRB_REPLY */
968 /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure
969 we get all tx completions. */
970 if (sisr
& SISR_TX1_EOF
) {
971 while(olympic_priv
->olympic_tx_status_ring
[(olympic_priv
->tx_ring_last_status
+ 1) & (OLYMPIC_TX_RING_SIZE
-1)].status
) {
972 olympic_priv
->tx_ring_last_status
++;
973 olympic_priv
->tx_ring_last_status
&= (OLYMPIC_TX_RING_SIZE
-1);
974 olympic_priv
->free_tx_ring_entries
++;
975 dev
->stats
.tx_bytes
+= olympic_priv
->tx_ring_skb
[olympic_priv
->tx_ring_last_status
]->len
;
976 dev
->stats
.tx_packets
++ ;
977 pci_unmap_single(olympic_priv
->pdev
,
978 le32_to_cpu(olympic_priv
->olympic_tx_ring
[olympic_priv
->tx_ring_last_status
].buffer
),
979 olympic_priv
->tx_ring_skb
[olympic_priv
->tx_ring_last_status
]->len
,PCI_DMA_TODEVICE
);
980 dev_kfree_skb_irq(olympic_priv
->tx_ring_skb
[olympic_priv
->tx_ring_last_status
]);
981 olympic_priv
->olympic_tx_ring
[olympic_priv
->tx_ring_last_status
].buffer
=cpu_to_le32(0xdeadbeef);
982 olympic_priv
->olympic_tx_status_ring
[olympic_priv
->tx_ring_last_status
].status
=0;
984 netif_wake_queue(dev
);
987 if (sisr
& SISR_RX_STATUS
) {
989 } /* SISR_RX_STATUS */
991 if (sisr
& SISR_ADAPTER_CHECK
) {
992 netif_stop_queue(dev
);
993 printk(KERN_WARNING
"%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev
->name
);
994 writel(readl(olympic_mmio
+LAPWWC
),olympic_mmio
+LAPA
);
995 adapter_check_area
= olympic_priv
->olympic_lap
+ ((readl(olympic_mmio
+LAPWWC
)) & (~0xf800)) ;
996 printk(KERN_WARNING
"%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev
->name
, readb(adapter_check_area
+0), readb(adapter_check_area
+1), readb(adapter_check_area
+2), readb(adapter_check_area
+3), readb(adapter_check_area
+4), readb(adapter_check_area
+5), readb(adapter_check_area
+6), readb(adapter_check_area
+7)) ;
997 spin_unlock(&olympic_priv
->olympic_lock
) ;
999 } /* SISR_ADAPTER_CHECK */
1001 if (sisr
& SISR_ASB_FREE
) {
1002 /* Wake up anything that is waiting for the asb response */
1003 if (olympic_priv
->asb_queued
) {
1004 olympic_asb_bh(dev
) ;
1006 } /* SISR_ASB_FREE */
1008 if (sisr
& SISR_ARB_CMD
) {
1009 olympic_arb_cmd(dev
) ;
1010 } /* SISR_ARB_CMD */
1012 if (sisr
& SISR_TRB_REPLY
) {
1013 /* Wake up anything that is waiting for the trb response */
1014 if (olympic_priv
->trb_queued
) {
1015 wake_up_interruptible(&olympic_priv
->trb_wait
);
1017 olympic_priv
->trb_queued
= 0 ;
1018 } /* SISR_TRB_REPLY */
1020 if (sisr
& SISR_RX_NOBUF
) {
1021 /* According to the documentation, we don't have to do anything, but trapping it keeps it out of
1022 /var/log/messages. */
1023 } /* SISR_RX_NOBUF */
1025 printk(KERN_WARNING
"%s: Unexpected interrupt: %x\n",dev
->name
, sisr
);
1026 printk(KERN_WARNING
"%s: SISR_MASK: %x\n",dev
->name
, readl(olympic_mmio
+SISR_MASK
)) ;
1027 } /* One if the interrupts we want */
1028 writel(SISR_MI
,olympic_mmio
+SISR_MASK_SUM
);
1030 spin_unlock(&olympic_priv
->olympic_lock
) ;
1034 static netdev_tx_t
olympic_xmit(struct sk_buff
*skb
,
1035 struct net_device
*dev
)
1037 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
1038 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
;
1039 unsigned long flags
;
1041 spin_lock_irqsave(&olympic_priv
->olympic_lock
, flags
);
1043 netif_stop_queue(dev
);
1045 if(olympic_priv
->free_tx_ring_entries
) {
1046 olympic_priv
->olympic_tx_ring
[olympic_priv
->tx_ring_free
].buffer
=
1047 cpu_to_le32(pci_map_single(olympic_priv
->pdev
, skb
->data
, skb
->len
,PCI_DMA_TODEVICE
));
1048 olympic_priv
->olympic_tx_ring
[olympic_priv
->tx_ring_free
].status_length
= cpu_to_le32(skb
->len
| (0x80000000));
1049 olympic_priv
->tx_ring_skb
[olympic_priv
->tx_ring_free
]=skb
;
1050 olympic_priv
->free_tx_ring_entries
--;
1052 olympic_priv
->tx_ring_free
++;
1053 olympic_priv
->tx_ring_free
&= (OLYMPIC_TX_RING_SIZE
-1);
1054 writew((((readw(olympic_mmio
+TXENQ_1
)) & 0x8000) ^ 0x8000) | 1,olympic_mmio
+TXENQ_1
);
1055 netif_wake_queue(dev
);
1056 spin_unlock_irqrestore(&olympic_priv
->olympic_lock
,flags
);
1057 return NETDEV_TX_OK
;
1059 spin_unlock_irqrestore(&olympic_priv
->olympic_lock
,flags
);
1060 return NETDEV_TX_BUSY
;
1066 static int olympic_close(struct net_device
*dev
)
1068 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
1069 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
,*srb
;
1070 unsigned long t
,flags
;
1072 DECLARE_WAITQUEUE(wait
,current
) ;
1074 netif_stop_queue(dev
);
1076 writel(olympic_priv
->srb
,olympic_mmio
+LAPA
);
1077 srb
=olympic_priv
->olympic_lap
+ (olympic_priv
->srb
& (~0xf800));
1079 writeb(SRB_CLOSE_ADAPTER
,srb
+0);
1081 writeb(OLYMPIC_CLEAR_RET_CODE
,srb
+2);
1083 add_wait_queue(&olympic_priv
->srb_wait
,&wait
) ;
1084 set_current_state(TASK_INTERRUPTIBLE
) ;
1086 spin_lock_irqsave(&olympic_priv
->olympic_lock
,flags
);
1087 olympic_priv
->srb_queued
=1;
1089 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
1090 spin_unlock_irqrestore(&olympic_priv
->olympic_lock
,flags
);
1092 while(olympic_priv
->srb_queued
) {
1094 t
= schedule_timeout_interruptible(60*HZ
);
1096 if(signal_pending(current
)) {
1097 printk(KERN_WARNING
"%s: SRB timed out.\n",dev
->name
);
1098 printk(KERN_WARNING
"SISR=%x MISR=%x\n",readl(olympic_mmio
+SISR
),readl(olympic_mmio
+LISR
));
1099 olympic_priv
->srb_queued
=0;
1104 printk(KERN_WARNING
"%s: SRB timed out. May not be fatal. \n",dev
->name
) ;
1106 olympic_priv
->srb_queued
=0;
1108 remove_wait_queue(&olympic_priv
->srb_wait
,&wait
) ;
1110 olympic_priv
->rx_status_last_received
++;
1111 olympic_priv
->rx_status_last_received
&=OLYMPIC_RX_RING_SIZE
-1;
1113 olympic_freemem(dev
) ;
1115 /* reset tx/rx fifo's and busmaster logic */
1117 writel(readl(olympic_mmio
+BCTL
)|(3<<13),olympic_mmio
+BCTL
);
1119 writel(readl(olympic_mmio
+BCTL
)&~(3<<13),olympic_mmio
+BCTL
);
1124 printk("srb(%p): ",srb
);
1126 printk("%x ",readb(srb
+i
));
1130 free_irq(dev
->irq
,dev
);
1136 static void olympic_set_rx_mode(struct net_device
*dev
)
1138 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1139 u8 __iomem
*olympic_mmio
= olympic_priv
->olympic_mmio
;
1142 struct dev_mc_list
*dmi
;
1143 unsigned char dev_mc_address
[4] ;
1146 writel(olympic_priv
->srb
,olympic_mmio
+LAPA
);
1147 srb
=olympic_priv
->olympic_lap
+ (olympic_priv
->srb
& (~0xf800));
1148 options
= olympic_priv
->olympic_copy_all_options
;
1150 if (dev
->flags
&IFF_PROMISC
)
1155 /* Only issue the srb if there is a change in options */
1157 if ((options
^ olympic_priv
->olympic_copy_all_options
)) {
1159 /* Now to issue the srb command to alter the copy.all.options */
1161 writeb(SRB_MODIFY_RECEIVE_OPTIONS
,srb
);
1163 writeb(OLYMPIC_CLEAR_RET_CODE
,srb
+2);
1165 writeb(olympic_priv
->olympic_receive_options
,srb
+4);
1166 writeb(options
,srb
+5);
1168 olympic_priv
->srb_queued
=2; /* Can't sleep, use srb_bh */
1170 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
1172 olympic_priv
->olympic_copy_all_options
= options
;
1177 /* Set the functional addresses we need for multicast */
1179 dev_mc_address
[0] = dev_mc_address
[1] = dev_mc_address
[2] = dev_mc_address
[3] = 0 ;
1181 for (i
=0,dmi
=dev
->mc_list
;i
< dev
->mc_count
; i
++,dmi
= dmi
->next
) {
1182 dev_mc_address
[0] |= dmi
->dmi_addr
[2] ;
1183 dev_mc_address
[1] |= dmi
->dmi_addr
[3] ;
1184 dev_mc_address
[2] |= dmi
->dmi_addr
[4] ;
1185 dev_mc_address
[3] |= dmi
->dmi_addr
[5] ;
1188 writeb(SRB_SET_FUNC_ADDRESS
,srb
+0);
1190 writeb(OLYMPIC_CLEAR_RET_CODE
,srb
+2);
1194 writeb(dev_mc_address
[0],srb
+6);
1195 writeb(dev_mc_address
[1],srb
+7);
1196 writeb(dev_mc_address
[2],srb
+8);
1197 writeb(dev_mc_address
[3],srb
+9);
1199 olympic_priv
->srb_queued
= 2 ;
1200 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
1204 static void olympic_srb_bh(struct net_device
*dev
)
1206 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1207 u8 __iomem
*olympic_mmio
= olympic_priv
->olympic_mmio
;
1210 writel(olympic_priv
->srb
,olympic_mmio
+LAPA
);
1211 srb
=olympic_priv
->olympic_lap
+ (olympic_priv
->srb
& (~0xf800));
1213 switch (readb(srb
)) {
1215 /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous)
1216 * At some point we should do something if we get an error, such as
1217 * resetting the IFF_PROMISC flag in dev
1220 case SRB_MODIFY_RECEIVE_OPTIONS
:
1221 switch (readb(srb
+2)) {
1223 printk(KERN_WARNING
"%s: Unrecognized srb command\n",dev
->name
) ;
1226 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
);
1229 if (olympic_priv
->olympic_message_level
)
1230 printk(KERN_WARNING
"%s: Receive Options Modified to %x,%x\n",dev
->name
,olympic_priv
->olympic_copy_all_options
, olympic_priv
->olympic_receive_options
) ;
1232 } /* switch srb[2] */
1235 /* SRB_SET_GROUP_ADDRESS - Multicast group setting
1238 case SRB_SET_GROUP_ADDRESS
:
1239 switch (readb(srb
+2)) {
1243 printk(KERN_WARNING
"%s: Unrecognized srb command \n",dev
->name
) ;
1246 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
);
1249 printk(KERN_WARNING
"%s: Group/Functional address indicator bits not set correctly\n",dev
->name
) ;
1251 case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */
1252 printk(KERN_WARNING
"%s: Group address registers full\n",dev
->name
) ;
1255 printk(KERN_INFO
"%s: Group Address already set.\n",dev
->name
) ;
1259 } /* switch srb[2] */
1262 /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list
1265 case SRB_RESET_GROUP_ADDRESS
:
1266 switch (readb(srb
+2)) {
1270 printk(KERN_WARNING
"%s: Unrecognized srb command \n",dev
->name
) ;
1273 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
) ;
1275 case 0x39: /* Must deal with this if individual multicast addresses used */
1276 printk(KERN_INFO
"%s: Group address not found \n",dev
->name
);
1280 } /* switch srb[2] */
1284 /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode
1287 case SRB_SET_FUNC_ADDRESS
:
1288 switch (readb(srb
+2)) {
1290 if (olympic_priv
->olympic_message_level
)
1291 printk(KERN_INFO
"%s: Functional Address Mask Set \n",dev
->name
) ;
1294 printk(KERN_WARNING
"%s: Unrecognized srb command \n",dev
->name
) ;
1297 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
) ;
1301 } /* switch srb[2] */
1304 /* SRB_READ_LOG - Read and reset the adapter error counters
1308 switch (readb(srb
+2)) {
1310 if (olympic_priv
->olympic_message_level
)
1311 printk(KERN_INFO
"%s: Read Log issued\n",dev
->name
) ;
1314 printk(KERN_WARNING
"%s: Unrecognized srb command \n",dev
->name
) ;
1317 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
) ;
1320 } /* switch srb[2] */
1323 /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */
1325 case SRB_READ_SR_COUNTERS
:
1326 switch (readb(srb
+2)) {
1328 if (olympic_priv
->olympic_message_level
)
1329 printk(KERN_INFO
"%s: Read Source Routing Counters issued\n",dev
->name
) ;
1332 printk(KERN_WARNING
"%s: Unrecognized srb command \n",dev
->name
) ;
1335 printk(KERN_WARNING
"%s: Adapter must be open for this operation, doh!!\n",dev
->name
) ;
1339 } /* switch srb[2] */
1343 printk(KERN_WARNING
"%s: Unrecognized srb bh return value.\n",dev
->name
);
1345 } /* switch srb[0] */
1349 static int olympic_set_mac_address (struct net_device
*dev
, void *addr
)
1351 struct sockaddr
*saddr
= addr
;
1352 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1354 if (netif_running(dev
)) {
1355 printk(KERN_WARNING
"%s: Cannot set mac/laa address while card is open\n", dev
->name
) ;
1359 memcpy(olympic_priv
->olympic_laa
, saddr
->sa_data
,dev
->addr_len
) ;
1361 if (olympic_priv
->olympic_message_level
) {
1362 printk(KERN_INFO
"%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev
->name
, olympic_priv
->olympic_laa
[0],
1363 olympic_priv
->olympic_laa
[1], olympic_priv
->olympic_laa
[2],
1364 olympic_priv
->olympic_laa
[3], olympic_priv
->olympic_laa
[4],
1365 olympic_priv
->olympic_laa
[5]);
1371 static void olympic_arb_cmd(struct net_device
*dev
)
1373 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1374 u8 __iomem
*olympic_mmio
=olympic_priv
->olympic_mmio
;
1375 u8 __iomem
*arb_block
, *asb_block
, *srb
;
1377 u16 frame_len
, buffer_len
;
1378 struct sk_buff
*mac_frame
;
1379 u8 __iomem
*buf_ptr
;
1380 u8 __iomem
*frame_data
;
1382 u16 lan_status
= 0, lan_status_diff
; /* Initialize to stop compiler warning */
1386 arb_block
= (olympic_priv
->olympic_lap
+ olympic_priv
->arb
) ;
1387 asb_block
= (olympic_priv
->olympic_lap
+ olympic_priv
->asb
) ;
1388 srb
= (olympic_priv
->olympic_lap
+ olympic_priv
->srb
) ;
1390 if (readb(arb_block
+0) == ARB_RECEIVE_DATA
) { /* Receive.data, MAC frames */
1392 header_len
= readb(arb_block
+8) ; /* 802.5 Token-Ring Header Length */
1393 frame_len
= swab16(readw(arb_block
+ 10)) ;
1395 buff_off
= swab16(readw(arb_block
+ 6)) ;
1397 buf_ptr
= olympic_priv
->olympic_lap
+ buff_off
;
1402 frame_data
= buf_ptr
+offsetof(struct mac_receive_buffer
,frame_data
) ;
1404 for (i
=0 ; i
< 14 ; i
++) {
1405 printk("Loc %d = %02x\n",i
,readb(frame_data
+ i
));
1408 printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr
+offsetof(struct mac_receive_buffer
,next
)), readb(buf_ptr
+offsetof(struct mac_receive_buffer
,frame_status
)), readw(buf_ptr
+offsetof(struct mac_receive_buffer
,buffer_length
)));
1411 mac_frame
= dev_alloc_skb(frame_len
) ;
1413 printk(KERN_WARNING
"%s: Memory squeeze, dropping frame.\n", dev
->name
);
1417 /* Walk the buffer chain, creating the frame */
1420 frame_data
= buf_ptr
+offsetof(struct mac_receive_buffer
,frame_data
) ;
1421 buffer_len
= swab16(readw(buf_ptr
+offsetof(struct mac_receive_buffer
,buffer_length
)));
1422 memcpy_fromio(skb_put(mac_frame
, buffer_len
), frame_data
, buffer_len
) ;
1423 next_ptr
=readw(buf_ptr
+offsetof(struct mac_receive_buffer
,next
));
1424 } while (next_ptr
&& (buf_ptr
=olympic_priv
->olympic_lap
+ swab16(next_ptr
)));
1426 mac_frame
->protocol
= tr_type_trans(mac_frame
, dev
);
1428 if (olympic_priv
->olympic_network_monitor
) {
1429 struct trh_hdr
*mac_hdr
;
1430 printk(KERN_WARNING
"%s: Received MAC Frame, details: \n",dev
->name
);
1431 mac_hdr
= tr_hdr(mac_frame
);
1432 printk(KERN_WARNING
"%s: MAC Frame Dest. Addr: %pM\n",
1433 dev
->name
, mac_hdr
->daddr
);
1434 printk(KERN_WARNING
"%s: MAC Frame Srce. Addr: %pM\n",
1435 dev
->name
, mac_hdr
->saddr
);
1437 netif_rx(mac_frame
);
1440 /* Now tell the card we have dealt with the received frame */
1442 /* Set LISR Bit 1 */
1443 writel(LISR_ARB_FREE
,olympic_priv
->olympic_mmio
+ LISR_SUM
);
1445 /* Is the ASB free ? */
1447 if (readb(asb_block
+ 2) != 0xff) {
1448 olympic_priv
->asb_queued
= 1 ;
1449 writel(LISR_ASB_FREE_REQ
,olympic_priv
->olympic_mmio
+LISR_SUM
);
1451 /* Drop out and wait for the bottom half to be run */
1454 writeb(ASB_RECEIVE_DATA
,asb_block
); /* Receive data */
1455 writeb(OLYMPIC_CLEAR_RET_CODE
,asb_block
+2); /* Necessary ?? */
1456 writeb(readb(arb_block
+6),asb_block
+6); /* Must send the address back to the adapter */
1457 writeb(readb(arb_block
+7),asb_block
+7); /* To let it know we have dealt with the data */
1459 writel(LISR_ASB_REPLY
| LISR_ASB_FREE_REQ
,olympic_priv
->olympic_mmio
+LISR_SUM
);
1461 olympic_priv
->asb_queued
= 2 ;
1465 } else if (readb(arb_block
) == ARB_LAN_CHANGE_STATUS
) { /* Lan.change.status */
1466 lan_status
= swab16(readw(arb_block
+6));
1467 fdx_prot_error
= readb(arb_block
+8) ;
1469 /* Issue ARB Free */
1470 writel(LISR_ARB_FREE
,olympic_priv
->olympic_mmio
+LISR_SUM
);
1472 lan_status_diff
= olympic_priv
->olympic_lan_status
^ lan_status
;
1474 if (lan_status_diff
& (LSC_LWF
| LSC_ARW
| LSC_FPE
| LSC_RR
) ) {
1475 if (lan_status_diff
& LSC_LWF
)
1476 printk(KERN_WARNING
"%s: Short circuit detected on the lobe\n",dev
->name
);
1477 if (lan_status_diff
& LSC_ARW
)
1478 printk(KERN_WARNING
"%s: Auto removal error\n",dev
->name
);
1479 if (lan_status_diff
& LSC_FPE
)
1480 printk(KERN_WARNING
"%s: FDX Protocol Error\n",dev
->name
);
1481 if (lan_status_diff
& LSC_RR
)
1482 printk(KERN_WARNING
"%s: Force remove MAC frame received\n",dev
->name
);
1484 /* Adapter has been closed by the hardware */
1486 /* reset tx/rx fifo's and busmaster logic */
1488 writel(readl(olympic_mmio
+BCTL
)|(3<<13),olympic_mmio
+BCTL
);
1490 writel(readl(olympic_mmio
+BCTL
)&~(3<<13),olympic_mmio
+BCTL
);
1491 netif_stop_queue(dev
);
1492 olympic_priv
->srb
= readw(olympic_priv
->olympic_lap
+ LAPWWO
) ;
1493 printk(KERN_WARNING
"%s: Adapter has been closed \n", dev
->name
) ;
1494 } /* If serious error */
1496 if (olympic_priv
->olympic_message_level
) {
1497 if (lan_status_diff
& LSC_SIG_LOSS
)
1498 printk(KERN_WARNING
"%s: No receive signal detected \n", dev
->name
) ;
1499 if (lan_status_diff
& LSC_HARD_ERR
)
1500 printk(KERN_INFO
"%s: Beaconing \n",dev
->name
);
1501 if (lan_status_diff
& LSC_SOFT_ERR
)
1502 printk(KERN_WARNING
"%s: Adapter transmitted Soft Error Report Mac Frame \n",dev
->name
);
1503 if (lan_status_diff
& LSC_TRAN_BCN
)
1504 printk(KERN_INFO
"%s: We are tranmitting the beacon, aaah\n",dev
->name
);
1505 if (lan_status_diff
& LSC_SS
)
1506 printk(KERN_INFO
"%s: Single Station on the ring \n", dev
->name
);
1507 if (lan_status_diff
& LSC_RING_REC
)
1508 printk(KERN_INFO
"%s: Ring recovery ongoing\n",dev
->name
);
1509 if (lan_status_diff
& LSC_FDX_MODE
)
1510 printk(KERN_INFO
"%s: Operating in FDX mode\n",dev
->name
);
1513 if (lan_status_diff
& LSC_CO
) {
1515 if (olympic_priv
->olympic_message_level
)
1516 printk(KERN_INFO
"%s: Counter Overflow \n", dev
->name
);
1518 /* Issue READ.LOG command */
1520 writeb(SRB_READ_LOG
, srb
);
1522 writeb(OLYMPIC_CLEAR_RET_CODE
,srb
+2);
1527 olympic_priv
->srb_queued
=2; /* Can't sleep, use srb_bh */
1529 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
1533 if (lan_status_diff
& LSC_SR_CO
) {
1535 if (olympic_priv
->olympic_message_level
)
1536 printk(KERN_INFO
"%s: Source routing counters overflow\n", dev
->name
);
1538 /* Issue a READ.SR.COUNTERS */
1540 writeb(SRB_READ_SR_COUNTERS
,srb
);
1542 writeb(OLYMPIC_CLEAR_RET_CODE
,srb
+2);
1545 olympic_priv
->srb_queued
=2; /* Can't sleep, use srb_bh */
1547 writel(LISR_SRB_CMD
,olympic_mmio
+LISR_SUM
);
1551 olympic_priv
->olympic_lan_status
= lan_status
;
1553 } /* Lan.change.status */
1555 printk(KERN_WARNING
"%s: Unknown arb command \n", dev
->name
);
1558 static void olympic_asb_bh(struct net_device
*dev
)
1560 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1561 u8 __iomem
*arb_block
, *asb_block
;
1563 arb_block
= (olympic_priv
->olympic_lap
+ olympic_priv
->arb
) ;
1564 asb_block
= (olympic_priv
->olympic_lap
+ olympic_priv
->asb
) ;
1566 if (olympic_priv
->asb_queued
== 1) { /* Dropped through the first time */
1568 writeb(ASB_RECEIVE_DATA
,asb_block
); /* Receive data */
1569 writeb(OLYMPIC_CLEAR_RET_CODE
,asb_block
+2); /* Necessary ?? */
1570 writeb(readb(arb_block
+6),asb_block
+6); /* Must send the address back to the adapter */
1571 writeb(readb(arb_block
+7),asb_block
+7); /* To let it know we have dealt with the data */
1573 writel(LISR_ASB_REPLY
| LISR_ASB_FREE_REQ
,olympic_priv
->olympic_mmio
+LISR_SUM
);
1574 olympic_priv
->asb_queued
= 2 ;
1579 if (olympic_priv
->asb_queued
== 2) {
1580 switch (readb(asb_block
+2)) {
1582 printk(KERN_WARNING
"%s: Unrecognized command code \n", dev
->name
);
1585 printk(KERN_WARNING
"%s: Unrecognized buffer address \n", dev
->name
);
1588 /* Valid response, everything should be ok again */
1591 printk(KERN_WARNING
"%s: Invalid return code in asb\n",dev
->name
);
1595 olympic_priv
->asb_queued
= 0 ;
1598 static int olympic_change_mtu(struct net_device
*dev
, int mtu
)
1600 struct olympic_private
*olympic_priv
= netdev_priv(dev
);
1603 if (olympic_priv
->olympic_ring_speed
== 4)
1614 olympic_priv
->pkt_buf_sz
= mtu
+ TR_HLEN
;
1619 static int olympic_proc_info(char *buffer
, char **start
, off_t offset
, int length
, int *eof
, void *data
)
1621 struct net_device
*dev
= (struct net_device
*)data
;
1622 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
1623 u8 __iomem
*oat
= (olympic_priv
->olympic_lap
+ olympic_priv
->olympic_addr_table_addr
) ;
1624 u8 __iomem
*opt
= (olympic_priv
->olympic_lap
+ olympic_priv
->olympic_parms_addr
) ;
1633 size
= sprintf(buffer
,
1634 "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev
->name
);
1635 size
+= sprintf(buffer
+size
, "\n%6s: Adapter Address : Node Address : Functional Addr\n",
1638 for (i
= 0 ; i
< 6 ; i
++)
1639 addr
[i
] = readb(oat
+offsetof(struct olympic_adapter_addr_table
,node_addr
) + i
);
1641 size
+= sprintf(buffer
+size
, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
1643 dev
->dev_addr
, addr
,
1644 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)),
1645 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+1),
1646 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+2),
1647 readb(oat
+offsetof(struct olympic_adapter_addr_table
,func_addr
)+3));
1649 size
+= sprintf(buffer
+size
, "\n%6s: Token Ring Parameters Table:\n", dev
->name
);
1651 size
+= sprintf(buffer
+size
, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n",
1654 for (i
= 0 ; i
< 6 ; i
++)
1655 addr
[i
] = readb(opt
+offsetof(struct olympic_parameters_table
, up_node_addr
) + i
);
1656 for (i
= 0 ; i
< 6 ; i
++)
1657 addr2
[i
] = readb(opt
+offsetof(struct olympic_parameters_table
, poll_addr
) + i
);
1659 size
+= sprintf(buffer
+size
, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n",
1661 readb(opt
+offsetof(struct olympic_parameters_table
, phys_addr
)),
1662 readb(opt
+offsetof(struct olympic_parameters_table
, phys_addr
)+1),
1663 readb(opt
+offsetof(struct olympic_parameters_table
, phys_addr
)+2),
1664 readb(opt
+offsetof(struct olympic_parameters_table
, phys_addr
)+3),
1666 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, acc_priority
))),
1667 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, auth_source_class
))),
1668 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, att_code
))));
1670 size
+= sprintf(buffer
+size
, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
1673 for (i
= 0 ; i
< 6 ; i
++)
1674 addr
[i
] = readb(opt
+offsetof(struct olympic_parameters_table
, source_addr
) + i
);
1675 size
+= sprintf(buffer
+size
, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n",
1677 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, beacon_type
))),
1678 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, major_vector
))),
1679 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, lan_status
))),
1680 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, local_ring
))),
1681 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, mon_error
))),
1682 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, frame_correl
))));
1684 size
+= sprintf(buffer
+size
, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n",
1687 for (i
= 0 ; i
< 6 ; i
++)
1688 addr
[i
] = readb(opt
+offsetof(struct olympic_parameters_table
, beacon_naun
) + i
);
1689 size
+= sprintf(buffer
+size
, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n",
1691 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, beacon_transmit
))),
1692 swab16(readw(opt
+offsetof(struct olympic_parameters_table
, beacon_receive
))),
1694 readb(opt
+offsetof(struct olympic_parameters_table
, beacon_phys
)),
1695 readb(opt
+offsetof(struct olympic_parameters_table
, beacon_phys
)+1),
1696 readb(opt
+offsetof(struct olympic_parameters_table
, beacon_phys
)+2),
1697 readb(opt
+offsetof(struct olympic_parameters_table
, beacon_phys
)+3));
1705 *start
=buffer
+(offset
-begin
); /* Start of wanted data */
1706 len
-=(offset
-begin
); /* Start slop */
1708 len
=length
; /* Ending slop */
1712 static void __devexit
olympic_remove_one(struct pci_dev
*pdev
)
1714 struct net_device
*dev
= pci_get_drvdata(pdev
) ;
1715 struct olympic_private
*olympic_priv
=netdev_priv(dev
);
1717 if (olympic_priv
->olympic_network_monitor
) {
1718 char proc_name
[20] ;
1719 strcpy(proc_name
,"olympic_") ;
1720 strcat(proc_name
,dev
->name
) ;
1721 remove_proc_entry(proc_name
,init_net
.proc_net
);
1723 unregister_netdev(dev
) ;
1724 iounmap(olympic_priv
->olympic_mmio
) ;
1725 iounmap(olympic_priv
->olympic_lap
) ;
1726 pci_release_regions(pdev
) ;
1727 pci_set_drvdata(pdev
,NULL
) ;
1731 static struct pci_driver olympic_driver
= {
1733 .id_table
= olympic_pci_tbl
,
1734 .probe
= olympic_probe
,
1735 .remove
= __devexit_p(olympic_remove_one
),
1738 static int __init
olympic_pci_init(void)
1740 return pci_register_driver(&olympic_driver
) ;
1743 static void __exit
olympic_pci_cleanup(void)
1745 pci_unregister_driver(&olympic_driver
) ;
1749 module_init(olympic_pci_init
) ;
1750 module_exit(olympic_pci_cleanup
) ;
1752 MODULE_LICENSE("GPL");