2 * VIA AGPGART routines.
5 #include <linux/types.h>
6 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/agp_backend.h>
12 static const struct pci_device_id agp_via_pci_table
[];
14 #define VIA_GARTCTRL 0x80
15 #define VIA_APSIZE 0x84
16 #define VIA_ATTBASE 0x88
18 #define VIA_AGP3_GARTCTRL 0x90
19 #define VIA_AGP3_APSIZE 0x94
20 #define VIA_AGP3_ATTBASE 0x98
21 #define VIA_AGPSEL 0xfd
23 static int via_fetch_size(void)
27 struct aper_size_info_8
*values
;
29 values
= A_SIZE_8(agp_bridge
->driver
->aperture_sizes
);
30 pci_read_config_byte(agp_bridge
->dev
, VIA_APSIZE
, &temp
);
31 for (i
= 0; i
< agp_bridge
->driver
->num_aperture_sizes
; i
++) {
32 if (temp
== values
[i
].size_value
) {
33 agp_bridge
->previous_size
=
34 agp_bridge
->current_size
= (void *) (values
+ i
);
35 agp_bridge
->aperture_size_idx
= i
;
36 return values
[i
].size
;
39 printk(KERN_ERR PFX
"Unknown aperture size from AGP bridge (0x%x)\n", temp
);
44 static int via_configure(void)
47 struct aper_size_info_8
*current_size
;
49 current_size
= A_SIZE_8(agp_bridge
->current_size
);
51 pci_write_config_byte(agp_bridge
->dev
, VIA_APSIZE
,
52 current_size
->size_value
);
53 /* address to map too */
54 pci_read_config_dword(agp_bridge
->dev
, AGP_APBASE
, &temp
);
55 agp_bridge
->gart_bus_addr
= (temp
& PCI_BASE_ADDRESS_MEM_MASK
);
57 /* GART control register */
58 pci_write_config_dword(agp_bridge
->dev
, VIA_GARTCTRL
, 0x0000000f);
60 /* attbase - aperture GATT base */
61 pci_write_config_dword(agp_bridge
->dev
, VIA_ATTBASE
,
62 (agp_bridge
->gatt_bus_addr
& 0xfffff000) | 3);
67 static void via_cleanup(void)
69 struct aper_size_info_8
*previous_size
;
71 previous_size
= A_SIZE_8(agp_bridge
->previous_size
);
72 pci_write_config_byte(agp_bridge
->dev
, VIA_APSIZE
,
73 previous_size
->size_value
);
74 /* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
75 * during reinitialization.
80 static void via_tlbflush(struct agp_memory
*mem
)
84 pci_read_config_dword(agp_bridge
->dev
, VIA_GARTCTRL
, &temp
);
86 pci_write_config_dword(agp_bridge
->dev
, VIA_GARTCTRL
, temp
);
88 pci_write_config_dword(agp_bridge
->dev
, VIA_GARTCTRL
, temp
);
92 static const struct aper_size_info_8 via_generic_sizes
[9] =
106 static int via_fetch_size_agp3(void)
110 struct aper_size_info_16
*values
;
112 values
= A_SIZE_16(agp_bridge
->driver
->aperture_sizes
);
113 pci_read_config_word(agp_bridge
->dev
, VIA_AGP3_APSIZE
, &temp
);
116 for (i
= 0; i
< agp_bridge
->driver
->num_aperture_sizes
; i
++) {
117 if (temp
== values
[i
].size_value
) {
118 agp_bridge
->previous_size
=
119 agp_bridge
->current_size
= (void *) (values
+ i
);
120 agp_bridge
->aperture_size_idx
= i
;
121 return values
[i
].size
;
128 static int via_configure_agp3(void)
131 struct aper_size_info_16
*current_size
;
133 current_size
= A_SIZE_16(agp_bridge
->current_size
);
135 /* address to map too */
136 pci_read_config_dword(agp_bridge
->dev
, AGP_APBASE
, &temp
);
137 agp_bridge
->gart_bus_addr
= (temp
& PCI_BASE_ADDRESS_MEM_MASK
);
139 /* attbase - aperture GATT base */
140 pci_write_config_dword(agp_bridge
->dev
, VIA_AGP3_ATTBASE
,
141 agp_bridge
->gatt_bus_addr
& 0xfffff000);
143 /* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
144 * translation table first.
145 * 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
146 * graphics AGP aperture for the AGP3.0 port.
148 pci_read_config_dword(agp_bridge
->dev
, VIA_AGP3_GARTCTRL
, &temp
);
149 pci_write_config_dword(agp_bridge
->dev
, VIA_AGP3_GARTCTRL
, temp
| (3<<7));
154 static void via_cleanup_agp3(void)
156 struct aper_size_info_16
*previous_size
;
158 previous_size
= A_SIZE_16(agp_bridge
->previous_size
);
159 pci_write_config_byte(agp_bridge
->dev
, VIA_APSIZE
, previous_size
->size_value
);
163 static void via_tlbflush_agp3(struct agp_memory
*mem
)
167 pci_read_config_dword(agp_bridge
->dev
, VIA_AGP3_GARTCTRL
, &temp
);
168 pci_write_config_dword(agp_bridge
->dev
, VIA_AGP3_GARTCTRL
, temp
& ~(1<<7));
169 pci_write_config_dword(agp_bridge
->dev
, VIA_AGP3_GARTCTRL
, temp
);
173 static const struct agp_bridge_driver via_agp3_driver
= {
174 .owner
= THIS_MODULE
,
175 .aperture_sizes
= agp3_generic_sizes
,
176 .size_type
= U8_APER_SIZE
,
177 .num_aperture_sizes
= 10,
178 .configure
= via_configure_agp3
,
179 .fetch_size
= via_fetch_size_agp3
,
180 .cleanup
= via_cleanup_agp3
,
181 .tlb_flush
= via_tlbflush_agp3
,
182 .mask_memory
= agp_generic_mask_memory
,
184 .agp_enable
= agp_generic_enable
,
185 .cache_flush
= global_cache_flush
,
186 .create_gatt_table
= agp_generic_create_gatt_table
,
187 .free_gatt_table
= agp_generic_free_gatt_table
,
188 .insert_memory
= agp_generic_insert_memory
,
189 .remove_memory
= agp_generic_remove_memory
,
190 .alloc_by_type
= agp_generic_alloc_by_type
,
191 .free_by_type
= agp_generic_free_by_type
,
192 .agp_alloc_page
= agp_generic_alloc_page
,
193 .agp_destroy_page
= agp_generic_destroy_page
,
194 .agp_type_to_mask_type
= agp_generic_type_to_mask_type
,
197 static const struct agp_bridge_driver via_driver
= {
198 .owner
= THIS_MODULE
,
199 .aperture_sizes
= via_generic_sizes
,
200 .size_type
= U8_APER_SIZE
,
201 .num_aperture_sizes
= 9,
202 .configure
= via_configure
,
203 .fetch_size
= via_fetch_size
,
204 .cleanup
= via_cleanup
,
205 .tlb_flush
= via_tlbflush
,
206 .mask_memory
= agp_generic_mask_memory
,
208 .agp_enable
= agp_generic_enable
,
209 .cache_flush
= global_cache_flush
,
210 .create_gatt_table
= agp_generic_create_gatt_table
,
211 .free_gatt_table
= agp_generic_free_gatt_table
,
212 .insert_memory
= agp_generic_insert_memory
,
213 .remove_memory
= agp_generic_remove_memory
,
214 .alloc_by_type
= agp_generic_alloc_by_type
,
215 .free_by_type
= agp_generic_free_by_type
,
216 .agp_alloc_page
= agp_generic_alloc_page
,
217 .agp_destroy_page
= agp_generic_destroy_page
,
218 .agp_type_to_mask_type
= agp_generic_type_to_mask_type
,
221 static struct agp_device_ids via_agp_device_ids
[] __devinitdata
=
224 .device_id
= PCI_DEVICE_ID_VIA_82C597_0
,
225 .chipset_name
= "Apollo VP3",
229 .device_id
= PCI_DEVICE_ID_VIA_82C598_0
,
230 .chipset_name
= "Apollo MVP3",
234 .device_id
= PCI_DEVICE_ID_VIA_8501_0
,
235 .chipset_name
= "Apollo MVP4",
240 .device_id
= PCI_DEVICE_ID_VIA_8601_0
,
241 .chipset_name
= "Apollo ProMedia/PLE133Ta",
244 /* VT82C693A / VT28C694T */
246 .device_id
= PCI_DEVICE_ID_VIA_82C691_0
,
247 .chipset_name
= "Apollo Pro 133",
251 .device_id
= PCI_DEVICE_ID_VIA_8371_0
,
252 .chipset_name
= "KX133",
257 .device_id
= PCI_DEVICE_ID_VIA_8633_0
,
258 .chipset_name
= "Pro 266",
262 .device_id
= PCI_DEVICE_ID_VIA_XN266
,
263 .chipset_name
= "Apollo Pro266",
268 .device_id
= PCI_DEVICE_ID_VIA_8361
,
269 .chipset_name
= "KLE133",
272 /* VT8365 / VT8362 */
274 .device_id
= PCI_DEVICE_ID_VIA_8363_0
,
275 .chipset_name
= "Twister-K/KT133x/KM133",
280 .device_id
= PCI_DEVICE_ID_VIA_8753_0
,
281 .chipset_name
= "P4X266",
286 .device_id
= PCI_DEVICE_ID_VIA_8367_0
,
287 .chipset_name
= "KT266/KY266x/KT333",
290 /* VT8633 (for CuMine/ Celeron) */
292 .device_id
= PCI_DEVICE_ID_VIA_8653_0
,
293 .chipset_name
= "Pro266T",
298 .device_id
= PCI_DEVICE_ID_VIA_XM266
,
299 .chipset_name
= "PM266/KM266",
304 .device_id
= PCI_DEVICE_ID_VIA_862X_0
,
305 .chipset_name
= "CLE266",
309 .device_id
= PCI_DEVICE_ID_VIA_8377_0
,
310 .chipset_name
= "KT400/KT400A/KT600",
313 /* VT8604 / VT8605 / VT8603
314 * (Apollo Pro133A chipset with S3 Savage4) */
316 .device_id
= PCI_DEVICE_ID_VIA_8605_0
,
317 .chipset_name
= "ProSavage PM133/PL133/PN133"
322 .device_id
= PCI_DEVICE_ID_VIA_8703_51_0
,
323 .chipset_name
= "P4M266x/P4N266",
328 .device_id
= PCI_DEVICE_ID_VIA_8754C_0
,
329 .chipset_name
= "PT800",
334 .device_id
= PCI_DEVICE_ID_VIA_8763_0
,
335 .chipset_name
= "P4X600"
340 .device_id
= PCI_DEVICE_ID_VIA_8378_0
,
341 .chipset_name
= "KM400/KM400A",
346 .device_id
= PCI_DEVICE_ID_VIA_PT880
,
347 .chipset_name
= "PT880",
352 .device_id
= PCI_DEVICE_ID_VIA_PT880ULTRA
,
353 .chipset_name
= "PT880 Ultra",
358 .device_id
= PCI_DEVICE_ID_VIA_8783_0
,
359 .chipset_name
= "PT890",
362 /* PM800/PN800/PM880/PN880 */
364 .device_id
= PCI_DEVICE_ID_VIA_PX8X0_0
,
365 .chipset_name
= "PM800/PN800/PM880/PN880",
369 .device_id
= PCI_DEVICE_ID_VIA_3269_0
,
370 .chipset_name
= "KT880",
374 .device_id
= PCI_DEVICE_ID_VIA_83_87XX_1
,
375 .chipset_name
= "VT83xx/VT87xx/KTxxx/Px8xx",
379 .device_id
= PCI_DEVICE_ID_VIA_3296_0
,
380 .chipset_name
= "P4M800",
384 .device_id
= PCI_DEVICE_ID_VIA_P4M800CE
,
385 .chipset_name
= "VT3314",
389 .device_id
= PCI_DEVICE_ID_VIA_VT3324
,
390 .chipset_name
= "CX700",
392 /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
393 * architecture, the AGP resource and behavior are different from
394 * the traditional AGP which resides only in chipset. AGP is used
395 * by 3D driver which wasn't available for the VT3336 and VT3364
396 * generation until now. Unfortunately, by testing, VT3364 works
397 * but VT3336 doesn't. - explaination from via, just leave this as
398 * as a placeholder to avoid future patches adding it back in.
402 .device_id
= PCI_DEVICE_ID_VIA_VT3336
,
403 .chipset_name
= "VT3336",
408 .device_id
= PCI_DEVICE_ID_VIA_P4M890
,
409 .chipset_name
= "P4M890",
413 .device_id
= PCI_DEVICE_ID_VIA_VT3364
,
414 .chipset_name
= "P4M900",
416 { }, /* dummy final entry, always present */
421 * VIA's AGP3 chipsets do magick to put the AGP bridge compliant
422 * with the same standards version as the graphics card.
424 static void check_via_agp3 (struct agp_bridge_data
*bridge
)
428 pci_read_config_byte(bridge
->dev
, VIA_AGPSEL
, ®
);
429 /* Check AGP 2.0 compatibility mode. */
430 if ((reg
& (1<<1))==0)
431 bridge
->driver
= &via_agp3_driver
;
435 static int __devinit
agp_via_probe(struct pci_dev
*pdev
,
436 const struct pci_device_id
*ent
)
438 struct agp_device_ids
*devs
= via_agp_device_ids
;
439 struct agp_bridge_data
*bridge
;
443 cap_ptr
= pci_find_capability(pdev
, PCI_CAP_ID_AGP
);
447 j
= ent
- agp_via_pci_table
;
448 printk (KERN_INFO PFX
"Detected VIA %s chipset\n", devs
[j
].chipset_name
);
450 bridge
= agp_alloc_bridge();
455 bridge
->capndx
= cap_ptr
;
456 bridge
->driver
= &via_driver
;
459 * Garg, there are KT400s with KT266 IDs.
461 if (pdev
->device
== PCI_DEVICE_ID_VIA_8367_0
) {
462 /* Is there a KT400 subsystem ? */
463 if (pdev
->subsystem_device
== PCI_DEVICE_ID_VIA_8377_0
) {
464 printk(KERN_INFO PFX
"Found KT400 in disguise as a KT266.\n");
465 check_via_agp3(bridge
);
469 /* If this is an AGP3 bridge, check which mode its in and adjust. */
470 get_agp_version(bridge
);
471 if (bridge
->major_version
>= 3)
472 check_via_agp3(bridge
);
474 /* Fill in the mode register */
475 pci_read_config_dword(pdev
,
476 bridge
->capndx
+PCI_AGP_STATUS
, &bridge
->mode
);
478 pci_set_drvdata(pdev
, bridge
);
479 return agp_add_bridge(bridge
);
482 static void __devexit
agp_via_remove(struct pci_dev
*pdev
)
484 struct agp_bridge_data
*bridge
= pci_get_drvdata(pdev
);
486 agp_remove_bridge(bridge
);
487 agp_put_bridge(bridge
);
492 static int agp_via_suspend(struct pci_dev
*pdev
, pm_message_t state
)
494 pci_save_state (pdev
);
495 pci_set_power_state (pdev
, PCI_D3hot
);
500 static int agp_via_resume(struct pci_dev
*pdev
)
502 struct agp_bridge_data
*bridge
= pci_get_drvdata(pdev
);
504 pci_set_power_state (pdev
, PCI_D0
);
505 pci_restore_state(pdev
);
507 if (bridge
->driver
== &via_agp3_driver
)
508 return via_configure_agp3();
509 else if (bridge
->driver
== &via_driver
)
510 return via_configure();
515 #endif /* CONFIG_PM */
517 /* must be the same order as name table above */
518 static const struct pci_device_id agp_via_pci_table
[] = {
521 .class = (PCI_CLASS_BRIDGE_HOST << 8), \
523 .vendor = PCI_VENDOR_ID_VIA, \
525 .subvendor = PCI_ANY_ID, \
526 .subdevice = PCI_ANY_ID, \
528 ID(PCI_DEVICE_ID_VIA_82C597_0
),
529 ID(PCI_DEVICE_ID_VIA_82C598_0
),
530 ID(PCI_DEVICE_ID_VIA_8501_0
),
531 ID(PCI_DEVICE_ID_VIA_8601_0
),
532 ID(PCI_DEVICE_ID_VIA_82C691_0
),
533 ID(PCI_DEVICE_ID_VIA_8371_0
),
534 ID(PCI_DEVICE_ID_VIA_8633_0
),
535 ID(PCI_DEVICE_ID_VIA_XN266
),
536 ID(PCI_DEVICE_ID_VIA_8361
),
537 ID(PCI_DEVICE_ID_VIA_8363_0
),
538 ID(PCI_DEVICE_ID_VIA_8753_0
),
539 ID(PCI_DEVICE_ID_VIA_8367_0
),
540 ID(PCI_DEVICE_ID_VIA_8653_0
),
541 ID(PCI_DEVICE_ID_VIA_XM266
),
542 ID(PCI_DEVICE_ID_VIA_862X_0
),
543 ID(PCI_DEVICE_ID_VIA_8377_0
),
544 ID(PCI_DEVICE_ID_VIA_8605_0
),
545 ID(PCI_DEVICE_ID_VIA_8703_51_0
),
546 ID(PCI_DEVICE_ID_VIA_8754C_0
),
547 ID(PCI_DEVICE_ID_VIA_8763_0
),
548 ID(PCI_DEVICE_ID_VIA_8378_0
),
549 ID(PCI_DEVICE_ID_VIA_PT880
),
550 ID(PCI_DEVICE_ID_VIA_PT880ULTRA
),
551 ID(PCI_DEVICE_ID_VIA_8783_0
),
552 ID(PCI_DEVICE_ID_VIA_PX8X0_0
),
553 ID(PCI_DEVICE_ID_VIA_3269_0
),
554 ID(PCI_DEVICE_ID_VIA_83_87XX_1
),
555 ID(PCI_DEVICE_ID_VIA_3296_0
),
556 ID(PCI_DEVICE_ID_VIA_P4M800CE
),
557 ID(PCI_DEVICE_ID_VIA_VT3324
),
558 ID(PCI_DEVICE_ID_VIA_P4M890
),
559 ID(PCI_DEVICE_ID_VIA_VT3364
),
563 MODULE_DEVICE_TABLE(pci
, agp_via_pci_table
);
566 static struct pci_driver agp_via_pci_driver
= {
567 .name
= "agpgart-via",
568 .id_table
= agp_via_pci_table
,
569 .probe
= agp_via_probe
,
570 .remove
= agp_via_remove
,
572 .suspend
= agp_via_suspend
,
573 .resume
= agp_via_resume
,
578 static int __init
agp_via_init(void)
582 return pci_register_driver(&agp_via_pci_driver
);
585 static void __exit
agp_via_cleanup(void)
587 pci_unregister_driver(&agp_via_pci_driver
);
590 module_init(agp_via_init
);
591 module_exit(agp_via_cleanup
);
593 MODULE_LICENSE("GPL");
594 MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>");