PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / char / synclink_gt.c
blob55c1653be00ca86f0f76051d940cfe7e5e933145
1 /*
2 * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
4 * Device driver for Microgate SyncLink GT serial adapters.
6 * written by Paul Fulghum for Microgate Corporation
7 * paulkf@microgate.com
9 * Microgate and SyncLink are trademarks of Microgate Corporation
11 * This code is released under the GNU General Public License (GPL)
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
16 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
17 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
18 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
19 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
21 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
22 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
23 * OF THE POSSIBILITY OF SUCH DAMAGE.
27 * DEBUG OUTPUT DEFINITIONS
29 * uncomment lines below to enable specific types of debug output
31 * DBGINFO information - most verbose output
32 * DBGERR serious errors
33 * DBGBH bottom half service routine debugging
34 * DBGISR interrupt service routine debugging
35 * DBGDATA output receive and transmit data
36 * DBGTBUF output transmit DMA buffers and registers
37 * DBGRBUF output receive DMA buffers and registers
40 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
41 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
42 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
43 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
44 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
45 //#define DBGTBUF(info) dump_tbufs(info)
46 //#define DBGRBUF(info) dump_rbufs(info)
49 #include <linux/module.h>
50 #include <linux/version.h>
51 #include <linux/errno.h>
52 #include <linux/signal.h>
53 #include <linux/sched.h>
54 #include <linux/timer.h>
55 #include <linux/interrupt.h>
56 #include <linux/pci.h>
57 #include <linux/tty.h>
58 #include <linux/tty_flip.h>
59 #include <linux/serial.h>
60 #include <linux/major.h>
61 #include <linux/string.h>
62 #include <linux/fcntl.h>
63 #include <linux/ptrace.h>
64 #include <linux/ioport.h>
65 #include <linux/mm.h>
66 #include <linux/slab.h>
67 #include <linux/netdevice.h>
68 #include <linux/vmalloc.h>
69 #include <linux/init.h>
70 #include <linux/delay.h>
71 #include <linux/ioctl.h>
72 #include <linux/termios.h>
73 #include <linux/bitops.h>
74 #include <linux/workqueue.h>
75 #include <linux/hdlc.h>
76 #include <linux/synclink.h>
78 #include <asm/system.h>
79 #include <asm/io.h>
80 #include <asm/irq.h>
81 #include <asm/dma.h>
82 #include <asm/types.h>
83 #include <asm/uaccess.h>
85 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
86 #define SYNCLINK_GENERIC_HDLC 1
87 #else
88 #define SYNCLINK_GENERIC_HDLC 0
89 #endif
92 * module identification
94 static char *driver_name = "SyncLink GT";
95 static char *driver_version = "$Revision: 4.50 $";
96 static char *tty_driver_name = "synclink_gt";
97 static char *tty_dev_prefix = "ttySLG";
98 MODULE_LICENSE("GPL");
99 #define MGSL_MAGIC 0x5401
100 #define MAX_DEVICES 32
102 static struct pci_device_id pci_table[] = {
103 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
104 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
105 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
106 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
107 {0,}, /* terminate list */
109 MODULE_DEVICE_TABLE(pci, pci_table);
111 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
112 static void remove_one(struct pci_dev *dev);
113 static struct pci_driver pci_driver = {
114 .name = "synclink_gt",
115 .id_table = pci_table,
116 .probe = init_one,
117 .remove = __devexit_p(remove_one),
120 static bool pci_registered;
123 * module configuration and status
125 static struct slgt_info *slgt_device_list;
126 static int slgt_device_count;
128 static int ttymajor;
129 static int debug_level;
130 static int maxframe[MAX_DEVICES];
131 static int dosyncppp[MAX_DEVICES];
133 module_param(ttymajor, int, 0);
134 module_param(debug_level, int, 0);
135 module_param_array(maxframe, int, NULL, 0);
136 module_param_array(dosyncppp, int, NULL, 0);
138 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
139 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
140 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
141 MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
144 * tty support and callbacks
146 static struct tty_driver *serial_driver;
148 static int open(struct tty_struct *tty, struct file * filp);
149 static void close(struct tty_struct *tty, struct file * filp);
150 static void hangup(struct tty_struct *tty);
151 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
153 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
154 static int put_char(struct tty_struct *tty, unsigned char ch);
155 static void send_xchar(struct tty_struct *tty, char ch);
156 static void wait_until_sent(struct tty_struct *tty, int timeout);
157 static int write_room(struct tty_struct *tty);
158 static void flush_chars(struct tty_struct *tty);
159 static void flush_buffer(struct tty_struct *tty);
160 static void tx_hold(struct tty_struct *tty);
161 static void tx_release(struct tty_struct *tty);
163 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
164 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
165 static int chars_in_buffer(struct tty_struct *tty);
166 static void throttle(struct tty_struct * tty);
167 static void unthrottle(struct tty_struct * tty);
168 static void set_break(struct tty_struct *tty, int break_state);
171 * generic HDLC support and callbacks
173 #if SYNCLINK_GENERIC_HDLC
174 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
175 static void hdlcdev_tx_done(struct slgt_info *info);
176 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
177 static int hdlcdev_init(struct slgt_info *info);
178 static void hdlcdev_exit(struct slgt_info *info);
179 #endif
183 * device specific structures, macros and functions
186 #define SLGT_MAX_PORTS 4
187 #define SLGT_REG_SIZE 256
190 * conditional wait facility
192 struct cond_wait {
193 struct cond_wait *next;
194 wait_queue_head_t q;
195 wait_queue_t wait;
196 unsigned int data;
198 static void init_cond_wait(struct cond_wait *w, unsigned int data);
199 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
200 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
201 static void flush_cond_wait(struct cond_wait **head);
204 * DMA buffer descriptor and access macros
206 struct slgt_desc
208 __le16 count;
209 __le16 status;
210 __le32 pbuf; /* physical address of data buffer */
211 __le32 next; /* physical address of next descriptor */
213 /* driver book keeping */
214 char *buf; /* virtual address of data buffer */
215 unsigned int pdesc; /* physical address of this descriptor */
216 dma_addr_t buf_dma_addr;
219 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
220 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
221 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
222 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
223 #define desc_count(a) (le16_to_cpu((a).count))
224 #define desc_status(a) (le16_to_cpu((a).status))
225 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
226 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
227 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
228 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
229 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
231 struct _input_signal_events {
232 int ri_up;
233 int ri_down;
234 int dsr_up;
235 int dsr_down;
236 int dcd_up;
237 int dcd_down;
238 int cts_up;
239 int cts_down;
243 * device instance data structure
245 struct slgt_info {
246 void *if_ptr; /* General purpose pointer (used by SPPP) */
248 struct slgt_info *next_device; /* device list link */
250 int magic;
251 int flags;
253 char device_name[25];
254 struct pci_dev *pdev;
256 int port_count; /* count of ports on adapter */
257 int adapter_num; /* adapter instance number */
258 int port_num; /* port instance number */
260 /* array of pointers to port contexts on this adapter */
261 struct slgt_info *port_array[SLGT_MAX_PORTS];
263 int count; /* count of opens */
264 int line; /* tty line instance number */
265 unsigned short close_delay;
266 unsigned short closing_wait; /* time to wait before closing */
268 struct mgsl_icount icount;
270 struct tty_struct *tty;
271 int timeout;
272 int x_char; /* xon/xoff character */
273 int blocked_open; /* # of blocked opens */
274 unsigned int read_status_mask;
275 unsigned int ignore_status_mask;
277 wait_queue_head_t open_wait;
278 wait_queue_head_t close_wait;
280 wait_queue_head_t status_event_wait_q;
281 wait_queue_head_t event_wait_q;
282 struct timer_list tx_timer;
283 struct timer_list rx_timer;
285 unsigned int gpio_present;
286 struct cond_wait *gpio_wait_q;
288 spinlock_t lock; /* spinlock for synchronizing with ISR */
290 struct work_struct task;
291 u32 pending_bh;
292 bool bh_requested;
293 bool bh_running;
295 int isr_overflow;
296 bool irq_requested; /* true if IRQ requested */
297 bool irq_occurred; /* for diagnostics use */
299 /* device configuration */
301 unsigned int bus_type;
302 unsigned int irq_level;
303 unsigned long irq_flags;
305 unsigned char __iomem * reg_addr; /* memory mapped registers address */
306 u32 phys_reg_addr;
307 bool reg_addr_requested;
309 MGSL_PARAMS params; /* communications parameters */
310 u32 idle_mode;
311 u32 max_frame_size; /* as set by device config */
313 unsigned int raw_rx_size;
314 unsigned int if_mode;
316 /* device status */
318 bool rx_enabled;
319 bool rx_restart;
321 bool tx_enabled;
322 bool tx_active;
324 unsigned char signals; /* serial signal states */
325 int init_error; /* initialization error */
327 unsigned char *tx_buf;
328 int tx_count;
330 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
331 char char_buf[MAX_ASYNC_BUFFER_SIZE];
332 bool drop_rts_on_tx_done;
333 struct _input_signal_events input_signal_events;
335 int dcd_chkcount; /* check counts to prevent */
336 int cts_chkcount; /* too many IRQs if a signal */
337 int dsr_chkcount; /* is floating */
338 int ri_chkcount;
340 char *bufs; /* virtual address of DMA buffer lists */
341 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
343 unsigned int rbuf_count;
344 struct slgt_desc *rbufs;
345 unsigned int rbuf_current;
346 unsigned int rbuf_index;
348 unsigned int tbuf_count;
349 struct slgt_desc *tbufs;
350 unsigned int tbuf_current;
351 unsigned int tbuf_start;
353 unsigned char *tmp_rbuf;
354 unsigned int tmp_rbuf_count;
356 /* SPPP/Cisco HDLC device parts */
358 int netcount;
359 int dosyncppp;
360 spinlock_t netlock;
361 #if SYNCLINK_GENERIC_HDLC
362 struct net_device *netdev;
363 #endif
367 static MGSL_PARAMS default_params = {
368 .mode = MGSL_MODE_HDLC,
369 .loopback = 0,
370 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
371 .encoding = HDLC_ENCODING_NRZI_SPACE,
372 .clock_speed = 0,
373 .addr_filter = 0xff,
374 .crc_type = HDLC_CRC_16_CCITT,
375 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
376 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
377 .data_rate = 9600,
378 .data_bits = 8,
379 .stop_bits = 1,
380 .parity = ASYNC_PARITY_NONE
384 #define BH_RECEIVE 1
385 #define BH_TRANSMIT 2
386 #define BH_STATUS 4
387 #define IO_PIN_SHUTDOWN_LIMIT 100
389 #define DMABUFSIZE 256
390 #define DESC_LIST_SIZE 4096
392 #define MASK_PARITY BIT1
393 #define MASK_FRAMING BIT0
394 #define MASK_BREAK BIT14
395 #define MASK_OVERRUN BIT4
397 #define GSR 0x00 /* global status */
398 #define JCR 0x04 /* JTAG control */
399 #define IODR 0x08 /* GPIO direction */
400 #define IOER 0x0c /* GPIO interrupt enable */
401 #define IOVR 0x10 /* GPIO value */
402 #define IOSR 0x14 /* GPIO interrupt status */
403 #define TDR 0x80 /* tx data */
404 #define RDR 0x80 /* rx data */
405 #define TCR 0x82 /* tx control */
406 #define TIR 0x84 /* tx idle */
407 #define TPR 0x85 /* tx preamble */
408 #define RCR 0x86 /* rx control */
409 #define VCR 0x88 /* V.24 control */
410 #define CCR 0x89 /* clock control */
411 #define BDR 0x8a /* baud divisor */
412 #define SCR 0x8c /* serial control */
413 #define SSR 0x8e /* serial status */
414 #define RDCSR 0x90 /* rx DMA control/status */
415 #define TDCSR 0x94 /* tx DMA control/status */
416 #define RDDAR 0x98 /* rx DMA descriptor address */
417 #define TDDAR 0x9c /* tx DMA descriptor address */
419 #define RXIDLE BIT14
420 #define RXBREAK BIT14
421 #define IRQ_TXDATA BIT13
422 #define IRQ_TXIDLE BIT12
423 #define IRQ_TXUNDER BIT11 /* HDLC */
424 #define IRQ_RXDATA BIT10
425 #define IRQ_RXIDLE BIT9 /* HDLC */
426 #define IRQ_RXBREAK BIT9 /* async */
427 #define IRQ_RXOVER BIT8
428 #define IRQ_DSR BIT7
429 #define IRQ_CTS BIT6
430 #define IRQ_DCD BIT5
431 #define IRQ_RI BIT4
432 #define IRQ_ALL 0x3ff0
433 #define IRQ_MASTER BIT0
435 #define slgt_irq_on(info, mask) \
436 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
437 #define slgt_irq_off(info, mask) \
438 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
440 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
441 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
442 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
443 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
444 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
445 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
447 static void msc_set_vcr(struct slgt_info *info);
449 static int startup(struct slgt_info *info);
450 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
451 static void shutdown(struct slgt_info *info);
452 static void program_hw(struct slgt_info *info);
453 static void change_params(struct slgt_info *info);
455 static int register_test(struct slgt_info *info);
456 static int irq_test(struct slgt_info *info);
457 static int loopback_test(struct slgt_info *info);
458 static int adapter_test(struct slgt_info *info);
460 static void reset_adapter(struct slgt_info *info);
461 static void reset_port(struct slgt_info *info);
462 static void async_mode(struct slgt_info *info);
463 static void sync_mode(struct slgt_info *info);
465 static void rx_stop(struct slgt_info *info);
466 static void rx_start(struct slgt_info *info);
467 static void reset_rbufs(struct slgt_info *info);
468 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
469 static void rdma_reset(struct slgt_info *info);
470 static bool rx_get_frame(struct slgt_info *info);
471 static bool rx_get_buf(struct slgt_info *info);
473 static void tx_start(struct slgt_info *info);
474 static void tx_stop(struct slgt_info *info);
475 static void tx_set_idle(struct slgt_info *info);
476 static unsigned int free_tbuf_count(struct slgt_info *info);
477 static void reset_tbufs(struct slgt_info *info);
478 static void tdma_reset(struct slgt_info *info);
479 static void tdma_start(struct slgt_info *info);
480 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
482 static void get_signals(struct slgt_info *info);
483 static void set_signals(struct slgt_info *info);
484 static void enable_loopback(struct slgt_info *info);
485 static void set_rate(struct slgt_info *info, u32 data_rate);
487 static int bh_action(struct slgt_info *info);
488 static void bh_handler(struct work_struct *work);
489 static void bh_transmit(struct slgt_info *info);
490 static void isr_serial(struct slgt_info *info);
491 static void isr_rdma(struct slgt_info *info);
492 static void isr_txeom(struct slgt_info *info, unsigned short status);
493 static void isr_tdma(struct slgt_info *info);
495 static int alloc_dma_bufs(struct slgt_info *info);
496 static void free_dma_bufs(struct slgt_info *info);
497 static int alloc_desc(struct slgt_info *info);
498 static void free_desc(struct slgt_info *info);
499 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
500 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
502 static int alloc_tmp_rbuf(struct slgt_info *info);
503 static void free_tmp_rbuf(struct slgt_info *info);
505 static void tx_timeout(unsigned long context);
506 static void rx_timeout(unsigned long context);
509 * ioctl handlers
511 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
512 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
513 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
514 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
515 static int set_txidle(struct slgt_info *info, int idle_mode);
516 static int tx_enable(struct slgt_info *info, int enable);
517 static int tx_abort(struct slgt_info *info);
518 static int rx_enable(struct slgt_info *info, int enable);
519 static int modem_input_wait(struct slgt_info *info,int arg);
520 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
521 static int tiocmget(struct tty_struct *tty, struct file *file);
522 static int tiocmset(struct tty_struct *tty, struct file *file,
523 unsigned int set, unsigned int clear);
524 static void set_break(struct tty_struct *tty, int break_state);
525 static int get_interface(struct slgt_info *info, int __user *if_mode);
526 static int set_interface(struct slgt_info *info, int if_mode);
527 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
528 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
529 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
532 * driver functions
534 static void add_device(struct slgt_info *info);
535 static void device_init(int adapter_num, struct pci_dev *pdev);
536 static int claim_resources(struct slgt_info *info);
537 static void release_resources(struct slgt_info *info);
540 * DEBUG OUTPUT CODE
542 #ifndef DBGINFO
543 #define DBGINFO(fmt)
544 #endif
545 #ifndef DBGERR
546 #define DBGERR(fmt)
547 #endif
548 #ifndef DBGBH
549 #define DBGBH(fmt)
550 #endif
551 #ifndef DBGISR
552 #define DBGISR(fmt)
553 #endif
555 #ifdef DBGDATA
556 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
558 int i;
559 int linecount;
560 printk("%s %s data:\n",info->device_name, label);
561 while(count) {
562 linecount = (count > 16) ? 16 : count;
563 for(i=0; i < linecount; i++)
564 printk("%02X ",(unsigned char)data[i]);
565 for(;i<17;i++)
566 printk(" ");
567 for(i=0;i<linecount;i++) {
568 if (data[i]>=040 && data[i]<=0176)
569 printk("%c",data[i]);
570 else
571 printk(".");
573 printk("\n");
574 data += linecount;
575 count -= linecount;
578 #else
579 #define DBGDATA(info, buf, size, label)
580 #endif
582 #ifdef DBGTBUF
583 static void dump_tbufs(struct slgt_info *info)
585 int i;
586 printk("tbuf_current=%d\n", info->tbuf_current);
587 for (i=0 ; i < info->tbuf_count ; i++) {
588 printk("%d: count=%04X status=%04X\n",
589 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
592 #else
593 #define DBGTBUF(info)
594 #endif
596 #ifdef DBGRBUF
597 static void dump_rbufs(struct slgt_info *info)
599 int i;
600 printk("rbuf_current=%d\n", info->rbuf_current);
601 for (i=0 ; i < info->rbuf_count ; i++) {
602 printk("%d: count=%04X status=%04X\n",
603 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
606 #else
607 #define DBGRBUF(info)
608 #endif
610 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
612 #ifdef SANITY_CHECK
613 if (!info) {
614 printk("null struct slgt_info for (%s) in %s\n", devname, name);
615 return 1;
617 if (info->magic != MGSL_MAGIC) {
618 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
619 return 1;
621 #else
622 if (!info)
623 return 1;
624 #endif
625 return 0;
629 * line discipline callback wrappers
631 * The wrappers maintain line discipline references
632 * while calling into the line discipline.
634 * ldisc_receive_buf - pass receive data to line discipline
636 static void ldisc_receive_buf(struct tty_struct *tty,
637 const __u8 *data, char *flags, int count)
639 struct tty_ldisc *ld;
640 if (!tty)
641 return;
642 ld = tty_ldisc_ref(tty);
643 if (ld) {
644 if (ld->receive_buf)
645 ld->receive_buf(tty, data, flags, count);
646 tty_ldisc_deref(ld);
650 /* tty callbacks */
652 static int open(struct tty_struct *tty, struct file *filp)
654 struct slgt_info *info;
655 int retval, line;
656 unsigned long flags;
658 line = tty->index;
659 if ((line < 0) || (line >= slgt_device_count)) {
660 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
661 return -ENODEV;
664 info = slgt_device_list;
665 while(info && info->line != line)
666 info = info->next_device;
667 if (sanity_check(info, tty->name, "open"))
668 return -ENODEV;
669 if (info->init_error) {
670 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
671 return -ENODEV;
674 tty->driver_data = info;
675 info->tty = tty;
677 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
679 /* If port is closing, signal caller to try again */
680 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
681 if (info->flags & ASYNC_CLOSING)
682 interruptible_sleep_on(&info->close_wait);
683 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
684 -EAGAIN : -ERESTARTSYS);
685 goto cleanup;
688 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
690 spin_lock_irqsave(&info->netlock, flags);
691 if (info->netcount) {
692 retval = -EBUSY;
693 spin_unlock_irqrestore(&info->netlock, flags);
694 goto cleanup;
696 info->count++;
697 spin_unlock_irqrestore(&info->netlock, flags);
699 if (info->count == 1) {
700 /* 1st open on this device, init hardware */
701 retval = startup(info);
702 if (retval < 0)
703 goto cleanup;
706 retval = block_til_ready(tty, filp, info);
707 if (retval) {
708 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
709 goto cleanup;
712 retval = 0;
714 cleanup:
715 if (retval) {
716 if (tty->count == 1)
717 info->tty = NULL; /* tty layer will release tty struct */
718 if(info->count)
719 info->count--;
722 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
723 return retval;
726 static void close(struct tty_struct *tty, struct file *filp)
728 struct slgt_info *info = tty->driver_data;
730 if (sanity_check(info, tty->name, "close"))
731 return;
732 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
734 if (!info->count)
735 return;
737 if (tty_hung_up_p(filp))
738 goto cleanup;
740 if ((tty->count == 1) && (info->count != 1)) {
742 * tty->count is 1 and the tty structure will be freed.
743 * info->count should be one in this case.
744 * if it's not, correct it so that the port is shutdown.
746 DBGERR(("%s close: bad refcount; tty->count=1, "
747 "info->count=%d\n", info->device_name, info->count));
748 info->count = 1;
751 info->count--;
753 /* if at least one open remaining, leave hardware active */
754 if (info->count)
755 goto cleanup;
757 info->flags |= ASYNC_CLOSING;
759 /* set tty->closing to notify line discipline to
760 * only process XON/XOFF characters. Only the N_TTY
761 * discipline appears to use this (ppp does not).
763 tty->closing = 1;
765 /* wait for transmit data to clear all layers */
767 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
768 DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
769 tty_wait_until_sent(tty, info->closing_wait);
772 if (info->flags & ASYNC_INITIALIZED)
773 wait_until_sent(tty, info->timeout);
774 flush_buffer(tty);
775 tty_ldisc_flush(tty);
777 shutdown(info);
779 tty->closing = 0;
780 info->tty = NULL;
782 if (info->blocked_open) {
783 if (info->close_delay) {
784 msleep_interruptible(jiffies_to_msecs(info->close_delay));
786 wake_up_interruptible(&info->open_wait);
789 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
791 wake_up_interruptible(&info->close_wait);
793 cleanup:
794 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
797 static void hangup(struct tty_struct *tty)
799 struct slgt_info *info = tty->driver_data;
801 if (sanity_check(info, tty->name, "hangup"))
802 return;
803 DBGINFO(("%s hangup\n", info->device_name));
805 flush_buffer(tty);
806 shutdown(info);
808 info->count = 0;
809 info->flags &= ~ASYNC_NORMAL_ACTIVE;
810 info->tty = NULL;
812 wake_up_interruptible(&info->open_wait);
815 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
817 struct slgt_info *info = tty->driver_data;
818 unsigned long flags;
820 DBGINFO(("%s set_termios\n", tty->driver->name));
822 change_params(info);
824 /* Handle transition to B0 status */
825 if (old_termios->c_cflag & CBAUD &&
826 !(tty->termios->c_cflag & CBAUD)) {
827 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
828 spin_lock_irqsave(&info->lock,flags);
829 set_signals(info);
830 spin_unlock_irqrestore(&info->lock,flags);
833 /* Handle transition away from B0 status */
834 if (!(old_termios->c_cflag & CBAUD) &&
835 tty->termios->c_cflag & CBAUD) {
836 info->signals |= SerialSignal_DTR;
837 if (!(tty->termios->c_cflag & CRTSCTS) ||
838 !test_bit(TTY_THROTTLED, &tty->flags)) {
839 info->signals |= SerialSignal_RTS;
841 spin_lock_irqsave(&info->lock,flags);
842 set_signals(info);
843 spin_unlock_irqrestore(&info->lock,flags);
846 /* Handle turning off CRTSCTS */
847 if (old_termios->c_cflag & CRTSCTS &&
848 !(tty->termios->c_cflag & CRTSCTS)) {
849 tty->hw_stopped = 0;
850 tx_release(tty);
854 static int write(struct tty_struct *tty,
855 const unsigned char *buf, int count)
857 int ret = 0;
858 struct slgt_info *info = tty->driver_data;
859 unsigned long flags;
861 if (sanity_check(info, tty->name, "write"))
862 goto cleanup;
863 DBGINFO(("%s write count=%d\n", info->device_name, count));
865 if (!info->tx_buf)
866 goto cleanup;
868 if (count > info->max_frame_size) {
869 ret = -EIO;
870 goto cleanup;
873 if (!count)
874 goto cleanup;
876 if (info->params.mode == MGSL_MODE_RAW ||
877 info->params.mode == MGSL_MODE_MONOSYNC ||
878 info->params.mode == MGSL_MODE_BISYNC) {
879 unsigned int bufs_needed = (count/DMABUFSIZE);
880 unsigned int bufs_free = free_tbuf_count(info);
881 if (count % DMABUFSIZE)
882 ++bufs_needed;
883 if (bufs_needed > bufs_free)
884 goto cleanup;
885 } else {
886 if (info->tx_active)
887 goto cleanup;
888 if (info->tx_count) {
889 /* send accumulated data from send_char() calls */
890 /* as frame and wait before accepting more data. */
891 tx_load(info, info->tx_buf, info->tx_count);
892 goto start;
896 ret = info->tx_count = count;
897 tx_load(info, buf, count);
898 goto start;
900 start:
901 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
902 spin_lock_irqsave(&info->lock,flags);
903 if (!info->tx_active)
904 tx_start(info);
905 else
906 tdma_start(info);
907 spin_unlock_irqrestore(&info->lock,flags);
910 cleanup:
911 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
912 return ret;
915 static int put_char(struct tty_struct *tty, unsigned char ch)
917 struct slgt_info *info = tty->driver_data;
918 unsigned long flags;
919 int ret = 0;
921 if (sanity_check(info, tty->name, "put_char"))
922 return 0;
923 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
924 if (!info->tx_buf)
925 return 0;
926 spin_lock_irqsave(&info->lock,flags);
927 if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
928 info->tx_buf[info->tx_count++] = ch;
929 ret = 1;
931 spin_unlock_irqrestore(&info->lock,flags);
932 return ret;
935 static void send_xchar(struct tty_struct *tty, char ch)
937 struct slgt_info *info = tty->driver_data;
938 unsigned long flags;
940 if (sanity_check(info, tty->name, "send_xchar"))
941 return;
942 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
943 info->x_char = ch;
944 if (ch) {
945 spin_lock_irqsave(&info->lock,flags);
946 if (!info->tx_enabled)
947 tx_start(info);
948 spin_unlock_irqrestore(&info->lock,flags);
952 static void wait_until_sent(struct tty_struct *tty, int timeout)
954 struct slgt_info *info = tty->driver_data;
955 unsigned long orig_jiffies, char_time;
957 if (!info )
958 return;
959 if (sanity_check(info, tty->name, "wait_until_sent"))
960 return;
961 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
962 if (!(info->flags & ASYNC_INITIALIZED))
963 goto exit;
965 orig_jiffies = jiffies;
967 /* Set check interval to 1/5 of estimated time to
968 * send a character, and make it at least 1. The check
969 * interval should also be less than the timeout.
970 * Note: use tight timings here to satisfy the NIST-PCTS.
973 lock_kernel();
975 if (info->params.data_rate) {
976 char_time = info->timeout/(32 * 5);
977 if (!char_time)
978 char_time++;
979 } else
980 char_time = 1;
982 if (timeout)
983 char_time = min_t(unsigned long, char_time, timeout);
985 while (info->tx_active) {
986 msleep_interruptible(jiffies_to_msecs(char_time));
987 if (signal_pending(current))
988 break;
989 if (timeout && time_after(jiffies, orig_jiffies + timeout))
990 break;
992 unlock_kernel();
994 exit:
995 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
998 static int write_room(struct tty_struct *tty)
1000 struct slgt_info *info = tty->driver_data;
1001 int ret;
1003 if (sanity_check(info, tty->name, "write_room"))
1004 return 0;
1005 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1006 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
1007 return ret;
1010 static void flush_chars(struct tty_struct *tty)
1012 struct slgt_info *info = tty->driver_data;
1013 unsigned long flags;
1015 if (sanity_check(info, tty->name, "flush_chars"))
1016 return;
1017 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
1019 if (info->tx_count <= 0 || tty->stopped ||
1020 tty->hw_stopped || !info->tx_buf)
1021 return;
1023 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
1025 spin_lock_irqsave(&info->lock,flags);
1026 if (!info->tx_active && info->tx_count) {
1027 tx_load(info, info->tx_buf,info->tx_count);
1028 tx_start(info);
1030 spin_unlock_irqrestore(&info->lock,flags);
1033 static void flush_buffer(struct tty_struct *tty)
1035 struct slgt_info *info = tty->driver_data;
1036 unsigned long flags;
1038 if (sanity_check(info, tty->name, "flush_buffer"))
1039 return;
1040 DBGINFO(("%s flush_buffer\n", info->device_name));
1042 spin_lock_irqsave(&info->lock,flags);
1043 if (!info->tx_active)
1044 info->tx_count = 0;
1045 spin_unlock_irqrestore(&info->lock,flags);
1047 tty_wakeup(tty);
1051 * throttle (stop) transmitter
1053 static void tx_hold(struct tty_struct *tty)
1055 struct slgt_info *info = tty->driver_data;
1056 unsigned long flags;
1058 if (sanity_check(info, tty->name, "tx_hold"))
1059 return;
1060 DBGINFO(("%s tx_hold\n", info->device_name));
1061 spin_lock_irqsave(&info->lock,flags);
1062 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1063 tx_stop(info);
1064 spin_unlock_irqrestore(&info->lock,flags);
1068 * release (start) transmitter
1070 static void tx_release(struct tty_struct *tty)
1072 struct slgt_info *info = tty->driver_data;
1073 unsigned long flags;
1075 if (sanity_check(info, tty->name, "tx_release"))
1076 return;
1077 DBGINFO(("%s tx_release\n", info->device_name));
1078 spin_lock_irqsave(&info->lock,flags);
1079 if (!info->tx_active && info->tx_count) {
1080 tx_load(info, info->tx_buf, info->tx_count);
1081 tx_start(info);
1083 spin_unlock_irqrestore(&info->lock,flags);
1087 * Service an IOCTL request
1089 * Arguments
1091 * tty pointer to tty instance data
1092 * file pointer to associated file object for device
1093 * cmd IOCTL command code
1094 * arg command argument/context
1096 * Return 0 if success, otherwise error code
1098 static int ioctl(struct tty_struct *tty, struct file *file,
1099 unsigned int cmd, unsigned long arg)
1101 struct slgt_info *info = tty->driver_data;
1102 struct mgsl_icount cnow; /* kernel counter temps */
1103 struct serial_icounter_struct __user *p_cuser; /* user space */
1104 unsigned long flags;
1105 void __user *argp = (void __user *)arg;
1106 int ret;
1108 if (sanity_check(info, tty->name, "ioctl"))
1109 return -ENODEV;
1110 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1112 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1113 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1114 if (tty->flags & (1 << TTY_IO_ERROR))
1115 return -EIO;
1118 lock_kernel();
1120 switch (cmd) {
1121 case MGSL_IOCGPARAMS:
1122 ret = get_params(info, argp);
1123 break;
1124 case MGSL_IOCSPARAMS:
1125 ret = set_params(info, argp);
1126 break;
1127 case MGSL_IOCGTXIDLE:
1128 ret = get_txidle(info, argp);
1129 break;
1130 case MGSL_IOCSTXIDLE:
1131 ret = set_txidle(info, (int)arg);
1132 break;
1133 case MGSL_IOCTXENABLE:
1134 ret = tx_enable(info, (int)arg);
1135 break;
1136 case MGSL_IOCRXENABLE:
1137 ret = rx_enable(info, (int)arg);
1138 break;
1139 case MGSL_IOCTXABORT:
1140 ret = tx_abort(info);
1141 break;
1142 case MGSL_IOCGSTATS:
1143 ret = get_stats(info, argp);
1144 break;
1145 case MGSL_IOCWAITEVENT:
1146 ret = wait_mgsl_event(info, argp);
1147 break;
1148 case TIOCMIWAIT:
1149 ret = modem_input_wait(info,(int)arg);
1150 break;
1151 case MGSL_IOCGIF:
1152 ret = get_interface(info, argp);
1153 break;
1154 case MGSL_IOCSIF:
1155 ret = set_interface(info,(int)arg);
1156 break;
1157 case MGSL_IOCSGPIO:
1158 ret = set_gpio(info, argp);
1159 break;
1160 case MGSL_IOCGGPIO:
1161 ret = get_gpio(info, argp);
1162 break;
1163 case MGSL_IOCWAITGPIO:
1164 ret = wait_gpio(info, argp);
1165 break;
1166 case TIOCGICOUNT:
1167 spin_lock_irqsave(&info->lock,flags);
1168 cnow = info->icount;
1169 spin_unlock_irqrestore(&info->lock,flags);
1170 p_cuser = argp;
1171 if (put_user(cnow.cts, &p_cuser->cts) ||
1172 put_user(cnow.dsr, &p_cuser->dsr) ||
1173 put_user(cnow.rng, &p_cuser->rng) ||
1174 put_user(cnow.dcd, &p_cuser->dcd) ||
1175 put_user(cnow.rx, &p_cuser->rx) ||
1176 put_user(cnow.tx, &p_cuser->tx) ||
1177 put_user(cnow.frame, &p_cuser->frame) ||
1178 put_user(cnow.overrun, &p_cuser->overrun) ||
1179 put_user(cnow.parity, &p_cuser->parity) ||
1180 put_user(cnow.brk, &p_cuser->brk) ||
1181 put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1182 ret = -EFAULT;
1183 ret = 0;
1184 break;
1185 default:
1186 ret = -ENOIOCTLCMD;
1188 unlock_kernel();
1189 return ret;
1193 * support for 32 bit ioctl calls on 64 bit systems
1195 #ifdef CONFIG_COMPAT
1196 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1198 struct MGSL_PARAMS32 tmp_params;
1200 DBGINFO(("%s get_params32\n", info->device_name));
1201 tmp_params.mode = (compat_ulong_t)info->params.mode;
1202 tmp_params.loopback = info->params.loopback;
1203 tmp_params.flags = info->params.flags;
1204 tmp_params.encoding = info->params.encoding;
1205 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1206 tmp_params.addr_filter = info->params.addr_filter;
1207 tmp_params.crc_type = info->params.crc_type;
1208 tmp_params.preamble_length = info->params.preamble_length;
1209 tmp_params.preamble = info->params.preamble;
1210 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1211 tmp_params.data_bits = info->params.data_bits;
1212 tmp_params.stop_bits = info->params.stop_bits;
1213 tmp_params.parity = info->params.parity;
1214 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1215 return -EFAULT;
1216 return 0;
1219 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1221 struct MGSL_PARAMS32 tmp_params;
1223 DBGINFO(("%s set_params32\n", info->device_name));
1224 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1225 return -EFAULT;
1227 spin_lock(&info->lock);
1228 info->params.mode = tmp_params.mode;
1229 info->params.loopback = tmp_params.loopback;
1230 info->params.flags = tmp_params.flags;
1231 info->params.encoding = tmp_params.encoding;
1232 info->params.clock_speed = tmp_params.clock_speed;
1233 info->params.addr_filter = tmp_params.addr_filter;
1234 info->params.crc_type = tmp_params.crc_type;
1235 info->params.preamble_length = tmp_params.preamble_length;
1236 info->params.preamble = tmp_params.preamble;
1237 info->params.data_rate = tmp_params.data_rate;
1238 info->params.data_bits = tmp_params.data_bits;
1239 info->params.stop_bits = tmp_params.stop_bits;
1240 info->params.parity = tmp_params.parity;
1241 spin_unlock(&info->lock);
1243 change_params(info);
1245 return 0;
1248 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1249 unsigned int cmd, unsigned long arg)
1251 struct slgt_info *info = tty->driver_data;
1252 int rc = -ENOIOCTLCMD;
1254 if (sanity_check(info, tty->name, "compat_ioctl"))
1255 return -ENODEV;
1256 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1258 switch (cmd) {
1260 case MGSL_IOCSPARAMS32:
1261 rc = set_params32(info, compat_ptr(arg));
1262 break;
1264 case MGSL_IOCGPARAMS32:
1265 rc = get_params32(info, compat_ptr(arg));
1266 break;
1268 case MGSL_IOCGPARAMS:
1269 case MGSL_IOCSPARAMS:
1270 case MGSL_IOCGTXIDLE:
1271 case MGSL_IOCGSTATS:
1272 case MGSL_IOCWAITEVENT:
1273 case MGSL_IOCGIF:
1274 case MGSL_IOCSGPIO:
1275 case MGSL_IOCGGPIO:
1276 case MGSL_IOCWAITGPIO:
1277 case TIOCGICOUNT:
1278 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1279 break;
1281 case MGSL_IOCSTXIDLE:
1282 case MGSL_IOCTXENABLE:
1283 case MGSL_IOCRXENABLE:
1284 case MGSL_IOCTXABORT:
1285 case TIOCMIWAIT:
1286 case MGSL_IOCSIF:
1287 rc = ioctl(tty, file, cmd, arg);
1288 break;
1291 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1292 return rc;
1294 #else
1295 #define slgt_compat_ioctl NULL
1296 #endif /* ifdef CONFIG_COMPAT */
1299 * proc fs support
1301 static inline int line_info(char *buf, struct slgt_info *info)
1303 char stat_buf[30];
1304 int ret;
1305 unsigned long flags;
1307 ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1308 info->device_name, info->phys_reg_addr,
1309 info->irq_level, info->max_frame_size);
1311 /* output current serial signal states */
1312 spin_lock_irqsave(&info->lock,flags);
1313 get_signals(info);
1314 spin_unlock_irqrestore(&info->lock,flags);
1316 stat_buf[0] = 0;
1317 stat_buf[1] = 0;
1318 if (info->signals & SerialSignal_RTS)
1319 strcat(stat_buf, "|RTS");
1320 if (info->signals & SerialSignal_CTS)
1321 strcat(stat_buf, "|CTS");
1322 if (info->signals & SerialSignal_DTR)
1323 strcat(stat_buf, "|DTR");
1324 if (info->signals & SerialSignal_DSR)
1325 strcat(stat_buf, "|DSR");
1326 if (info->signals & SerialSignal_DCD)
1327 strcat(stat_buf, "|CD");
1328 if (info->signals & SerialSignal_RI)
1329 strcat(stat_buf, "|RI");
1331 if (info->params.mode != MGSL_MODE_ASYNC) {
1332 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1333 info->icount.txok, info->icount.rxok);
1334 if (info->icount.txunder)
1335 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1336 if (info->icount.txabort)
1337 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1338 if (info->icount.rxshort)
1339 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1340 if (info->icount.rxlong)
1341 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1342 if (info->icount.rxover)
1343 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1344 if (info->icount.rxcrc)
1345 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1346 } else {
1347 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1348 info->icount.tx, info->icount.rx);
1349 if (info->icount.frame)
1350 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1351 if (info->icount.parity)
1352 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1353 if (info->icount.brk)
1354 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1355 if (info->icount.overrun)
1356 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1359 /* Append serial signal status to end */
1360 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1362 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1363 info->tx_active,info->bh_requested,info->bh_running,
1364 info->pending_bh);
1366 return ret;
1369 /* Called to print information about devices
1371 static int read_proc(char *page, char **start, off_t off, int count,
1372 int *eof, void *data)
1374 int len = 0, l;
1375 off_t begin = 0;
1376 struct slgt_info *info;
1378 len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
1380 info = slgt_device_list;
1381 while( info ) {
1382 l = line_info(page + len, info);
1383 len += l;
1384 if (len+begin > off+count)
1385 goto done;
1386 if (len+begin < off) {
1387 begin += len;
1388 len = 0;
1390 info = info->next_device;
1393 *eof = 1;
1394 done:
1395 if (off >= len+begin)
1396 return 0;
1397 *start = page + (off-begin);
1398 return ((count < begin+len-off) ? count : begin+len-off);
1402 * return count of bytes in transmit buffer
1404 static int chars_in_buffer(struct tty_struct *tty)
1406 struct slgt_info *info = tty->driver_data;
1407 if (sanity_check(info, tty->name, "chars_in_buffer"))
1408 return 0;
1409 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
1410 return info->tx_count;
1414 * signal remote device to throttle send data (our receive data)
1416 static void throttle(struct tty_struct * tty)
1418 struct slgt_info *info = tty->driver_data;
1419 unsigned long flags;
1421 if (sanity_check(info, tty->name, "throttle"))
1422 return;
1423 DBGINFO(("%s throttle\n", info->device_name));
1424 if (I_IXOFF(tty))
1425 send_xchar(tty, STOP_CHAR(tty));
1426 if (tty->termios->c_cflag & CRTSCTS) {
1427 spin_lock_irqsave(&info->lock,flags);
1428 info->signals &= ~SerialSignal_RTS;
1429 set_signals(info);
1430 spin_unlock_irqrestore(&info->lock,flags);
1435 * signal remote device to stop throttling send data (our receive data)
1437 static void unthrottle(struct tty_struct * tty)
1439 struct slgt_info *info = tty->driver_data;
1440 unsigned long flags;
1442 if (sanity_check(info, tty->name, "unthrottle"))
1443 return;
1444 DBGINFO(("%s unthrottle\n", info->device_name));
1445 if (I_IXOFF(tty)) {
1446 if (info->x_char)
1447 info->x_char = 0;
1448 else
1449 send_xchar(tty, START_CHAR(tty));
1451 if (tty->termios->c_cflag & CRTSCTS) {
1452 spin_lock_irqsave(&info->lock,flags);
1453 info->signals |= SerialSignal_RTS;
1454 set_signals(info);
1455 spin_unlock_irqrestore(&info->lock,flags);
1460 * set or clear transmit break condition
1461 * break_state -1=set break condition, 0=clear
1463 static void set_break(struct tty_struct *tty, int break_state)
1465 struct slgt_info *info = tty->driver_data;
1466 unsigned short value;
1467 unsigned long flags;
1469 if (sanity_check(info, tty->name, "set_break"))
1470 return;
1471 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1473 spin_lock_irqsave(&info->lock,flags);
1474 value = rd_reg16(info, TCR);
1475 if (break_state == -1)
1476 value |= BIT6;
1477 else
1478 value &= ~BIT6;
1479 wr_reg16(info, TCR, value);
1480 spin_unlock_irqrestore(&info->lock,flags);
1483 #if SYNCLINK_GENERIC_HDLC
1486 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1487 * set encoding and frame check sequence (FCS) options
1489 * dev pointer to network device structure
1490 * encoding serial encoding setting
1491 * parity FCS setting
1493 * returns 0 if success, otherwise error code
1495 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1496 unsigned short parity)
1498 struct slgt_info *info = dev_to_port(dev);
1499 unsigned char new_encoding;
1500 unsigned short new_crctype;
1502 /* return error if TTY interface open */
1503 if (info->count)
1504 return -EBUSY;
1506 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1508 switch (encoding)
1510 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1511 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1512 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1513 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1514 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1515 default: return -EINVAL;
1518 switch (parity)
1520 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1521 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1522 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1523 default: return -EINVAL;
1526 info->params.encoding = new_encoding;
1527 info->params.crc_type = new_crctype;
1529 /* if network interface up, reprogram hardware */
1530 if (info->netcount)
1531 program_hw(info);
1533 return 0;
1537 * called by generic HDLC layer to send frame
1539 * skb socket buffer containing HDLC frame
1540 * dev pointer to network device structure
1542 * returns 0 if success, otherwise error code
1544 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1546 struct slgt_info *info = dev_to_port(dev);
1547 struct net_device_stats *stats = hdlc_stats(dev);
1548 unsigned long flags;
1550 DBGINFO(("%s hdlc_xmit\n", dev->name));
1552 /* stop sending until this frame completes */
1553 netif_stop_queue(dev);
1555 /* copy data to device buffers */
1556 info->tx_count = skb->len;
1557 tx_load(info, skb->data, skb->len);
1559 /* update network statistics */
1560 stats->tx_packets++;
1561 stats->tx_bytes += skb->len;
1563 /* done with socket buffer, so free it */
1564 dev_kfree_skb(skb);
1566 /* save start time for transmit timeout detection */
1567 dev->trans_start = jiffies;
1569 /* start hardware transmitter if necessary */
1570 spin_lock_irqsave(&info->lock,flags);
1571 if (!info->tx_active)
1572 tx_start(info);
1573 spin_unlock_irqrestore(&info->lock,flags);
1575 return 0;
1579 * called by network layer when interface enabled
1580 * claim resources and initialize hardware
1582 * dev pointer to network device structure
1584 * returns 0 if success, otherwise error code
1586 static int hdlcdev_open(struct net_device *dev)
1588 struct slgt_info *info = dev_to_port(dev);
1589 int rc;
1590 unsigned long flags;
1592 if (!try_module_get(THIS_MODULE))
1593 return -EBUSY;
1595 DBGINFO(("%s hdlcdev_open\n", dev->name));
1597 /* generic HDLC layer open processing */
1598 if ((rc = hdlc_open(dev)))
1599 return rc;
1601 /* arbitrate between network and tty opens */
1602 spin_lock_irqsave(&info->netlock, flags);
1603 if (info->count != 0 || info->netcount != 0) {
1604 DBGINFO(("%s hdlc_open busy\n", dev->name));
1605 spin_unlock_irqrestore(&info->netlock, flags);
1606 return -EBUSY;
1608 info->netcount=1;
1609 spin_unlock_irqrestore(&info->netlock, flags);
1611 /* claim resources and init adapter */
1612 if ((rc = startup(info)) != 0) {
1613 spin_lock_irqsave(&info->netlock, flags);
1614 info->netcount=0;
1615 spin_unlock_irqrestore(&info->netlock, flags);
1616 return rc;
1619 /* assert DTR and RTS, apply hardware settings */
1620 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1621 program_hw(info);
1623 /* enable network layer transmit */
1624 dev->trans_start = jiffies;
1625 netif_start_queue(dev);
1627 /* inform generic HDLC layer of current DCD status */
1628 spin_lock_irqsave(&info->lock, flags);
1629 get_signals(info);
1630 spin_unlock_irqrestore(&info->lock, flags);
1631 if (info->signals & SerialSignal_DCD)
1632 netif_carrier_on(dev);
1633 else
1634 netif_carrier_off(dev);
1635 return 0;
1639 * called by network layer when interface is disabled
1640 * shutdown hardware and release resources
1642 * dev pointer to network device structure
1644 * returns 0 if success, otherwise error code
1646 static int hdlcdev_close(struct net_device *dev)
1648 struct slgt_info *info = dev_to_port(dev);
1649 unsigned long flags;
1651 DBGINFO(("%s hdlcdev_close\n", dev->name));
1653 netif_stop_queue(dev);
1655 /* shutdown adapter and release resources */
1656 shutdown(info);
1658 hdlc_close(dev);
1660 spin_lock_irqsave(&info->netlock, flags);
1661 info->netcount=0;
1662 spin_unlock_irqrestore(&info->netlock, flags);
1664 module_put(THIS_MODULE);
1665 return 0;
1669 * called by network layer to process IOCTL call to network device
1671 * dev pointer to network device structure
1672 * ifr pointer to network interface request structure
1673 * cmd IOCTL command code
1675 * returns 0 if success, otherwise error code
1677 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1679 const size_t size = sizeof(sync_serial_settings);
1680 sync_serial_settings new_line;
1681 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1682 struct slgt_info *info = dev_to_port(dev);
1683 unsigned int flags;
1685 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1687 /* return error if TTY interface open */
1688 if (info->count)
1689 return -EBUSY;
1691 if (cmd != SIOCWANDEV)
1692 return hdlc_ioctl(dev, ifr, cmd);
1694 switch(ifr->ifr_settings.type) {
1695 case IF_GET_IFACE: /* return current sync_serial_settings */
1697 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1698 if (ifr->ifr_settings.size < size) {
1699 ifr->ifr_settings.size = size; /* data size wanted */
1700 return -ENOBUFS;
1703 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1704 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1705 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1706 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1708 switch (flags){
1709 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1710 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1711 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1712 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1713 default: new_line.clock_type = CLOCK_DEFAULT;
1716 new_line.clock_rate = info->params.clock_speed;
1717 new_line.loopback = info->params.loopback ? 1:0;
1719 if (copy_to_user(line, &new_line, size))
1720 return -EFAULT;
1721 return 0;
1723 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1725 if(!capable(CAP_NET_ADMIN))
1726 return -EPERM;
1727 if (copy_from_user(&new_line, line, size))
1728 return -EFAULT;
1730 switch (new_line.clock_type)
1732 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1733 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1734 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1735 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1736 case CLOCK_DEFAULT: flags = info->params.flags &
1737 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1738 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1739 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1740 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1741 default: return -EINVAL;
1744 if (new_line.loopback != 0 && new_line.loopback != 1)
1745 return -EINVAL;
1747 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1748 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1749 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1750 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1751 info->params.flags |= flags;
1753 info->params.loopback = new_line.loopback;
1755 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1756 info->params.clock_speed = new_line.clock_rate;
1757 else
1758 info->params.clock_speed = 0;
1760 /* if network interface up, reprogram hardware */
1761 if (info->netcount)
1762 program_hw(info);
1763 return 0;
1765 default:
1766 return hdlc_ioctl(dev, ifr, cmd);
1771 * called by network layer when transmit timeout is detected
1773 * dev pointer to network device structure
1775 static void hdlcdev_tx_timeout(struct net_device *dev)
1777 struct slgt_info *info = dev_to_port(dev);
1778 struct net_device_stats *stats = hdlc_stats(dev);
1779 unsigned long flags;
1781 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1783 stats->tx_errors++;
1784 stats->tx_aborted_errors++;
1786 spin_lock_irqsave(&info->lock,flags);
1787 tx_stop(info);
1788 spin_unlock_irqrestore(&info->lock,flags);
1790 netif_wake_queue(dev);
1794 * called by device driver when transmit completes
1795 * reenable network layer transmit if stopped
1797 * info pointer to device instance information
1799 static void hdlcdev_tx_done(struct slgt_info *info)
1801 if (netif_queue_stopped(info->netdev))
1802 netif_wake_queue(info->netdev);
1806 * called by device driver when frame received
1807 * pass frame to network layer
1809 * info pointer to device instance information
1810 * buf pointer to buffer contianing frame data
1811 * size count of data bytes in buf
1813 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1815 struct sk_buff *skb = dev_alloc_skb(size);
1816 struct net_device *dev = info->netdev;
1817 struct net_device_stats *stats = hdlc_stats(dev);
1819 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1821 if (skb == NULL) {
1822 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1823 stats->rx_dropped++;
1824 return;
1827 memcpy(skb_put(skb, size),buf,size);
1829 skb->protocol = hdlc_type_trans(skb, info->netdev);
1831 stats->rx_packets++;
1832 stats->rx_bytes += size;
1834 netif_rx(skb);
1836 info->netdev->last_rx = jiffies;
1840 * called by device driver when adding device instance
1841 * do generic HDLC initialization
1843 * info pointer to device instance information
1845 * returns 0 if success, otherwise error code
1847 static int hdlcdev_init(struct slgt_info *info)
1849 int rc;
1850 struct net_device *dev;
1851 hdlc_device *hdlc;
1853 /* allocate and initialize network and HDLC layer objects */
1855 if (!(dev = alloc_hdlcdev(info))) {
1856 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1857 return -ENOMEM;
1860 /* for network layer reporting purposes only */
1861 dev->mem_start = info->phys_reg_addr;
1862 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1863 dev->irq = info->irq_level;
1865 /* network layer callbacks and settings */
1866 dev->do_ioctl = hdlcdev_ioctl;
1867 dev->open = hdlcdev_open;
1868 dev->stop = hdlcdev_close;
1869 dev->tx_timeout = hdlcdev_tx_timeout;
1870 dev->watchdog_timeo = 10*HZ;
1871 dev->tx_queue_len = 50;
1873 /* generic HDLC layer callbacks and settings */
1874 hdlc = dev_to_hdlc(dev);
1875 hdlc->attach = hdlcdev_attach;
1876 hdlc->xmit = hdlcdev_xmit;
1878 /* register objects with HDLC layer */
1879 if ((rc = register_hdlc_device(dev))) {
1880 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1881 free_netdev(dev);
1882 return rc;
1885 info->netdev = dev;
1886 return 0;
1890 * called by device driver when removing device instance
1891 * do generic HDLC cleanup
1893 * info pointer to device instance information
1895 static void hdlcdev_exit(struct slgt_info *info)
1897 unregister_hdlc_device(info->netdev);
1898 free_netdev(info->netdev);
1899 info->netdev = NULL;
1902 #endif /* ifdef CONFIG_HDLC */
1905 * get async data from rx DMA buffers
1907 static void rx_async(struct slgt_info *info)
1909 struct tty_struct *tty = info->tty;
1910 struct mgsl_icount *icount = &info->icount;
1911 unsigned int start, end;
1912 unsigned char *p;
1913 unsigned char status;
1914 struct slgt_desc *bufs = info->rbufs;
1915 int i, count;
1916 int chars = 0;
1917 int stat;
1918 unsigned char ch;
1920 start = end = info->rbuf_current;
1922 while(desc_complete(bufs[end])) {
1923 count = desc_count(bufs[end]) - info->rbuf_index;
1924 p = bufs[end].buf + info->rbuf_index;
1926 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1927 DBGDATA(info, p, count, "rx");
1929 for(i=0 ; i < count; i+=2, p+=2) {
1930 ch = *p;
1931 icount->rx++;
1933 stat = 0;
1935 if ((status = *(p+1) & (BIT1 + BIT0))) {
1936 if (status & BIT1)
1937 icount->parity++;
1938 else if (status & BIT0)
1939 icount->frame++;
1940 /* discard char if tty control flags say so */
1941 if (status & info->ignore_status_mask)
1942 continue;
1943 if (status & BIT1)
1944 stat = TTY_PARITY;
1945 else if (status & BIT0)
1946 stat = TTY_FRAME;
1948 if (tty) {
1949 tty_insert_flip_char(tty, ch, stat);
1950 chars++;
1954 if (i < count) {
1955 /* receive buffer not completed */
1956 info->rbuf_index += i;
1957 mod_timer(&info->rx_timer, jiffies + 1);
1958 break;
1961 info->rbuf_index = 0;
1962 free_rbufs(info, end, end);
1964 if (++end == info->rbuf_count)
1965 end = 0;
1967 /* if entire list searched then no frame available */
1968 if (end == start)
1969 break;
1972 if (tty && chars)
1973 tty_flip_buffer_push(tty);
1977 * return next bottom half action to perform
1979 static int bh_action(struct slgt_info *info)
1981 unsigned long flags;
1982 int rc;
1984 spin_lock_irqsave(&info->lock,flags);
1986 if (info->pending_bh & BH_RECEIVE) {
1987 info->pending_bh &= ~BH_RECEIVE;
1988 rc = BH_RECEIVE;
1989 } else if (info->pending_bh & BH_TRANSMIT) {
1990 info->pending_bh &= ~BH_TRANSMIT;
1991 rc = BH_TRANSMIT;
1992 } else if (info->pending_bh & BH_STATUS) {
1993 info->pending_bh &= ~BH_STATUS;
1994 rc = BH_STATUS;
1995 } else {
1996 /* Mark BH routine as complete */
1997 info->bh_running = false;
1998 info->bh_requested = false;
1999 rc = 0;
2002 spin_unlock_irqrestore(&info->lock,flags);
2004 return rc;
2008 * perform bottom half processing
2010 static void bh_handler(struct work_struct *work)
2012 struct slgt_info *info = container_of(work, struct slgt_info, task);
2013 int action;
2015 if (!info)
2016 return;
2017 info->bh_running = true;
2019 while((action = bh_action(info))) {
2020 switch (action) {
2021 case BH_RECEIVE:
2022 DBGBH(("%s bh receive\n", info->device_name));
2023 switch(info->params.mode) {
2024 case MGSL_MODE_ASYNC:
2025 rx_async(info);
2026 break;
2027 case MGSL_MODE_HDLC:
2028 while(rx_get_frame(info));
2029 break;
2030 case MGSL_MODE_RAW:
2031 case MGSL_MODE_MONOSYNC:
2032 case MGSL_MODE_BISYNC:
2033 while(rx_get_buf(info));
2034 break;
2036 /* restart receiver if rx DMA buffers exhausted */
2037 if (info->rx_restart)
2038 rx_start(info);
2039 break;
2040 case BH_TRANSMIT:
2041 bh_transmit(info);
2042 break;
2043 case BH_STATUS:
2044 DBGBH(("%s bh status\n", info->device_name));
2045 info->ri_chkcount = 0;
2046 info->dsr_chkcount = 0;
2047 info->dcd_chkcount = 0;
2048 info->cts_chkcount = 0;
2049 break;
2050 default:
2051 DBGBH(("%s unknown action\n", info->device_name));
2052 break;
2055 DBGBH(("%s bh_handler exit\n", info->device_name));
2058 static void bh_transmit(struct slgt_info *info)
2060 struct tty_struct *tty = info->tty;
2062 DBGBH(("%s bh_transmit\n", info->device_name));
2063 if (tty)
2064 tty_wakeup(tty);
2067 static void dsr_change(struct slgt_info *info, unsigned short status)
2069 if (status & BIT3) {
2070 info->signals |= SerialSignal_DSR;
2071 info->input_signal_events.dsr_up++;
2072 } else {
2073 info->signals &= ~SerialSignal_DSR;
2074 info->input_signal_events.dsr_down++;
2076 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2077 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2078 slgt_irq_off(info, IRQ_DSR);
2079 return;
2081 info->icount.dsr++;
2082 wake_up_interruptible(&info->status_event_wait_q);
2083 wake_up_interruptible(&info->event_wait_q);
2084 info->pending_bh |= BH_STATUS;
2087 static void cts_change(struct slgt_info *info, unsigned short status)
2089 if (status & BIT2) {
2090 info->signals |= SerialSignal_CTS;
2091 info->input_signal_events.cts_up++;
2092 } else {
2093 info->signals &= ~SerialSignal_CTS;
2094 info->input_signal_events.cts_down++;
2096 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2097 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2098 slgt_irq_off(info, IRQ_CTS);
2099 return;
2101 info->icount.cts++;
2102 wake_up_interruptible(&info->status_event_wait_q);
2103 wake_up_interruptible(&info->event_wait_q);
2104 info->pending_bh |= BH_STATUS;
2106 if (info->flags & ASYNC_CTS_FLOW) {
2107 if (info->tty) {
2108 if (info->tty->hw_stopped) {
2109 if (info->signals & SerialSignal_CTS) {
2110 info->tty->hw_stopped = 0;
2111 info->pending_bh |= BH_TRANSMIT;
2112 return;
2114 } else {
2115 if (!(info->signals & SerialSignal_CTS))
2116 info->tty->hw_stopped = 1;
2122 static void dcd_change(struct slgt_info *info, unsigned short status)
2124 if (status & BIT1) {
2125 info->signals |= SerialSignal_DCD;
2126 info->input_signal_events.dcd_up++;
2127 } else {
2128 info->signals &= ~SerialSignal_DCD;
2129 info->input_signal_events.dcd_down++;
2131 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2132 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2133 slgt_irq_off(info, IRQ_DCD);
2134 return;
2136 info->icount.dcd++;
2137 #if SYNCLINK_GENERIC_HDLC
2138 if (info->netcount) {
2139 if (info->signals & SerialSignal_DCD)
2140 netif_carrier_on(info->netdev);
2141 else
2142 netif_carrier_off(info->netdev);
2144 #endif
2145 wake_up_interruptible(&info->status_event_wait_q);
2146 wake_up_interruptible(&info->event_wait_q);
2147 info->pending_bh |= BH_STATUS;
2149 if (info->flags & ASYNC_CHECK_CD) {
2150 if (info->signals & SerialSignal_DCD)
2151 wake_up_interruptible(&info->open_wait);
2152 else {
2153 if (info->tty)
2154 tty_hangup(info->tty);
2159 static void ri_change(struct slgt_info *info, unsigned short status)
2161 if (status & BIT0) {
2162 info->signals |= SerialSignal_RI;
2163 info->input_signal_events.ri_up++;
2164 } else {
2165 info->signals &= ~SerialSignal_RI;
2166 info->input_signal_events.ri_down++;
2168 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2169 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2170 slgt_irq_off(info, IRQ_RI);
2171 return;
2173 info->icount.rng++;
2174 wake_up_interruptible(&info->status_event_wait_q);
2175 wake_up_interruptible(&info->event_wait_q);
2176 info->pending_bh |= BH_STATUS;
2179 static void isr_serial(struct slgt_info *info)
2181 unsigned short status = rd_reg16(info, SSR);
2183 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2185 wr_reg16(info, SSR, status); /* clear pending */
2187 info->irq_occurred = true;
2189 if (info->params.mode == MGSL_MODE_ASYNC) {
2190 if (status & IRQ_TXIDLE) {
2191 if (info->tx_count)
2192 isr_txeom(info, status);
2194 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2195 info->icount.brk++;
2196 /* process break detection if tty control allows */
2197 if (info->tty) {
2198 if (!(status & info->ignore_status_mask)) {
2199 if (info->read_status_mask & MASK_BREAK) {
2200 tty_insert_flip_char(info->tty, 0, TTY_BREAK);
2201 if (info->flags & ASYNC_SAK)
2202 do_SAK(info->tty);
2207 } else {
2208 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2209 isr_txeom(info, status);
2211 if (status & IRQ_RXIDLE) {
2212 if (status & RXIDLE)
2213 info->icount.rxidle++;
2214 else
2215 info->icount.exithunt++;
2216 wake_up_interruptible(&info->event_wait_q);
2219 if (status & IRQ_RXOVER)
2220 rx_start(info);
2223 if (status & IRQ_DSR)
2224 dsr_change(info, status);
2225 if (status & IRQ_CTS)
2226 cts_change(info, status);
2227 if (status & IRQ_DCD)
2228 dcd_change(info, status);
2229 if (status & IRQ_RI)
2230 ri_change(info, status);
2233 static void isr_rdma(struct slgt_info *info)
2235 unsigned int status = rd_reg32(info, RDCSR);
2237 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2239 /* RDCSR (rx DMA control/status)
2241 * 31..07 reserved
2242 * 06 save status byte to DMA buffer
2243 * 05 error
2244 * 04 eol (end of list)
2245 * 03 eob (end of buffer)
2246 * 02 IRQ enable
2247 * 01 reset
2248 * 00 enable
2250 wr_reg32(info, RDCSR, status); /* clear pending */
2252 if (status & (BIT5 + BIT4)) {
2253 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2254 info->rx_restart = true;
2256 info->pending_bh |= BH_RECEIVE;
2259 static void isr_tdma(struct slgt_info *info)
2261 unsigned int status = rd_reg32(info, TDCSR);
2263 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2265 /* TDCSR (tx DMA control/status)
2267 * 31..06 reserved
2268 * 05 error
2269 * 04 eol (end of list)
2270 * 03 eob (end of buffer)
2271 * 02 IRQ enable
2272 * 01 reset
2273 * 00 enable
2275 wr_reg32(info, TDCSR, status); /* clear pending */
2277 if (status & (BIT5 + BIT4 + BIT3)) {
2278 // another transmit buffer has completed
2279 // run bottom half to get more send data from user
2280 info->pending_bh |= BH_TRANSMIT;
2284 static void isr_txeom(struct slgt_info *info, unsigned short status)
2286 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2288 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2289 tdma_reset(info);
2290 reset_tbufs(info);
2291 if (status & IRQ_TXUNDER) {
2292 unsigned short val = rd_reg16(info, TCR);
2293 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2294 wr_reg16(info, TCR, val); /* clear reset bit */
2297 if (info->tx_active) {
2298 if (info->params.mode != MGSL_MODE_ASYNC) {
2299 if (status & IRQ_TXUNDER)
2300 info->icount.txunder++;
2301 else if (status & IRQ_TXIDLE)
2302 info->icount.txok++;
2305 info->tx_active = false;
2306 info->tx_count = 0;
2308 del_timer(&info->tx_timer);
2310 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2311 info->signals &= ~SerialSignal_RTS;
2312 info->drop_rts_on_tx_done = false;
2313 set_signals(info);
2316 #if SYNCLINK_GENERIC_HDLC
2317 if (info->netcount)
2318 hdlcdev_tx_done(info);
2319 else
2320 #endif
2322 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2323 tx_stop(info);
2324 return;
2326 info->pending_bh |= BH_TRANSMIT;
2331 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2333 struct cond_wait *w, *prev;
2335 /* wake processes waiting for specific transitions */
2336 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2337 if (w->data & changed) {
2338 w->data = state;
2339 wake_up_interruptible(&w->q);
2340 if (prev != NULL)
2341 prev->next = w->next;
2342 else
2343 info->gpio_wait_q = w->next;
2344 } else
2345 prev = w;
2349 /* interrupt service routine
2351 * irq interrupt number
2352 * dev_id device ID supplied during interrupt registration
2354 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2356 struct slgt_info *info = dev_id;
2357 unsigned int gsr;
2358 unsigned int i;
2360 DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2362 spin_lock(&info->lock);
2364 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2365 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2366 info->irq_occurred = true;
2367 for(i=0; i < info->port_count ; i++) {
2368 if (info->port_array[i] == NULL)
2369 continue;
2370 if (gsr & (BIT8 << i))
2371 isr_serial(info->port_array[i]);
2372 if (gsr & (BIT16 << (i*2)))
2373 isr_rdma(info->port_array[i]);
2374 if (gsr & (BIT17 << (i*2)))
2375 isr_tdma(info->port_array[i]);
2379 if (info->gpio_present) {
2380 unsigned int state;
2381 unsigned int changed;
2382 while ((changed = rd_reg32(info, IOSR)) != 0) {
2383 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2384 /* read latched state of GPIO signals */
2385 state = rd_reg32(info, IOVR);
2386 /* clear pending GPIO interrupt bits */
2387 wr_reg32(info, IOSR, changed);
2388 for (i=0 ; i < info->port_count ; i++) {
2389 if (info->port_array[i] != NULL)
2390 isr_gpio(info->port_array[i], changed, state);
2395 for(i=0; i < info->port_count ; i++) {
2396 struct slgt_info *port = info->port_array[i];
2398 if (port && (port->count || port->netcount) &&
2399 port->pending_bh && !port->bh_running &&
2400 !port->bh_requested) {
2401 DBGISR(("%s bh queued\n", port->device_name));
2402 schedule_work(&port->task);
2403 port->bh_requested = true;
2407 spin_unlock(&info->lock);
2409 DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2410 return IRQ_HANDLED;
2413 static int startup(struct slgt_info *info)
2415 DBGINFO(("%s startup\n", info->device_name));
2417 if (info->flags & ASYNC_INITIALIZED)
2418 return 0;
2420 if (!info->tx_buf) {
2421 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2422 if (!info->tx_buf) {
2423 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2424 return -ENOMEM;
2428 info->pending_bh = 0;
2430 memset(&info->icount, 0, sizeof(info->icount));
2432 /* program hardware for current parameters */
2433 change_params(info);
2435 if (info->tty)
2436 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2438 info->flags |= ASYNC_INITIALIZED;
2440 return 0;
2444 * called by close() and hangup() to shutdown hardware
2446 static void shutdown(struct slgt_info *info)
2448 unsigned long flags;
2450 if (!(info->flags & ASYNC_INITIALIZED))
2451 return;
2453 DBGINFO(("%s shutdown\n", info->device_name));
2455 /* clear status wait queue because status changes */
2456 /* can't happen after shutting down the hardware */
2457 wake_up_interruptible(&info->status_event_wait_q);
2458 wake_up_interruptible(&info->event_wait_q);
2460 del_timer_sync(&info->tx_timer);
2461 del_timer_sync(&info->rx_timer);
2463 kfree(info->tx_buf);
2464 info->tx_buf = NULL;
2466 spin_lock_irqsave(&info->lock,flags);
2468 tx_stop(info);
2469 rx_stop(info);
2471 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2473 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2474 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2475 set_signals(info);
2478 flush_cond_wait(&info->gpio_wait_q);
2480 spin_unlock_irqrestore(&info->lock,flags);
2482 if (info->tty)
2483 set_bit(TTY_IO_ERROR, &info->tty->flags);
2485 info->flags &= ~ASYNC_INITIALIZED;
2488 static void program_hw(struct slgt_info *info)
2490 unsigned long flags;
2492 spin_lock_irqsave(&info->lock,flags);
2494 rx_stop(info);
2495 tx_stop(info);
2497 if (info->params.mode != MGSL_MODE_ASYNC ||
2498 info->netcount)
2499 sync_mode(info);
2500 else
2501 async_mode(info);
2503 set_signals(info);
2505 info->dcd_chkcount = 0;
2506 info->cts_chkcount = 0;
2507 info->ri_chkcount = 0;
2508 info->dsr_chkcount = 0;
2510 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
2511 get_signals(info);
2513 if (info->netcount ||
2514 (info->tty && info->tty->termios->c_cflag & CREAD))
2515 rx_start(info);
2517 spin_unlock_irqrestore(&info->lock,flags);
2521 * reconfigure adapter based on new parameters
2523 static void change_params(struct slgt_info *info)
2525 unsigned cflag;
2526 int bits_per_char;
2528 if (!info->tty || !info->tty->termios)
2529 return;
2530 DBGINFO(("%s change_params\n", info->device_name));
2532 cflag = info->tty->termios->c_cflag;
2534 /* if B0 rate (hangup) specified then negate DTR and RTS */
2535 /* otherwise assert DTR and RTS */
2536 if (cflag & CBAUD)
2537 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2538 else
2539 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2541 /* byte size and parity */
2543 switch (cflag & CSIZE) {
2544 case CS5: info->params.data_bits = 5; break;
2545 case CS6: info->params.data_bits = 6; break;
2546 case CS7: info->params.data_bits = 7; break;
2547 case CS8: info->params.data_bits = 8; break;
2548 default: info->params.data_bits = 7; break;
2551 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2553 if (cflag & PARENB)
2554 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2555 else
2556 info->params.parity = ASYNC_PARITY_NONE;
2558 /* calculate number of jiffies to transmit a full
2559 * FIFO (32 bytes) at specified data rate
2561 bits_per_char = info->params.data_bits +
2562 info->params.stop_bits + 1;
2564 info->params.data_rate = tty_get_baud_rate(info->tty);
2566 if (info->params.data_rate) {
2567 info->timeout = (32*HZ*bits_per_char) /
2568 info->params.data_rate;
2570 info->timeout += HZ/50; /* Add .02 seconds of slop */
2572 if (cflag & CRTSCTS)
2573 info->flags |= ASYNC_CTS_FLOW;
2574 else
2575 info->flags &= ~ASYNC_CTS_FLOW;
2577 if (cflag & CLOCAL)
2578 info->flags &= ~ASYNC_CHECK_CD;
2579 else
2580 info->flags |= ASYNC_CHECK_CD;
2582 /* process tty input control flags */
2584 info->read_status_mask = IRQ_RXOVER;
2585 if (I_INPCK(info->tty))
2586 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2587 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2588 info->read_status_mask |= MASK_BREAK;
2589 if (I_IGNPAR(info->tty))
2590 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2591 if (I_IGNBRK(info->tty)) {
2592 info->ignore_status_mask |= MASK_BREAK;
2593 /* If ignoring parity and break indicators, ignore
2594 * overruns too. (For real raw support).
2596 if (I_IGNPAR(info->tty))
2597 info->ignore_status_mask |= MASK_OVERRUN;
2600 program_hw(info);
2603 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2605 DBGINFO(("%s get_stats\n", info->device_name));
2606 if (!user_icount) {
2607 memset(&info->icount, 0, sizeof(info->icount));
2608 } else {
2609 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2610 return -EFAULT;
2612 return 0;
2615 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2617 DBGINFO(("%s get_params\n", info->device_name));
2618 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2619 return -EFAULT;
2620 return 0;
2623 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2625 unsigned long flags;
2626 MGSL_PARAMS tmp_params;
2628 DBGINFO(("%s set_params\n", info->device_name));
2629 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2630 return -EFAULT;
2632 spin_lock_irqsave(&info->lock, flags);
2633 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2634 spin_unlock_irqrestore(&info->lock, flags);
2636 change_params(info);
2638 return 0;
2641 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2643 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2644 if (put_user(info->idle_mode, idle_mode))
2645 return -EFAULT;
2646 return 0;
2649 static int set_txidle(struct slgt_info *info, int idle_mode)
2651 unsigned long flags;
2652 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2653 spin_lock_irqsave(&info->lock,flags);
2654 info->idle_mode = idle_mode;
2655 if (info->params.mode != MGSL_MODE_ASYNC)
2656 tx_set_idle(info);
2657 spin_unlock_irqrestore(&info->lock,flags);
2658 return 0;
2661 static int tx_enable(struct slgt_info *info, int enable)
2663 unsigned long flags;
2664 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2665 spin_lock_irqsave(&info->lock,flags);
2666 if (enable) {
2667 if (!info->tx_enabled)
2668 tx_start(info);
2669 } else {
2670 if (info->tx_enabled)
2671 tx_stop(info);
2673 spin_unlock_irqrestore(&info->lock,flags);
2674 return 0;
2678 * abort transmit HDLC frame
2680 static int tx_abort(struct slgt_info *info)
2682 unsigned long flags;
2683 DBGINFO(("%s tx_abort\n", info->device_name));
2684 spin_lock_irqsave(&info->lock,flags);
2685 tdma_reset(info);
2686 spin_unlock_irqrestore(&info->lock,flags);
2687 return 0;
2690 static int rx_enable(struct slgt_info *info, int enable)
2692 unsigned long flags;
2693 DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
2694 spin_lock_irqsave(&info->lock,flags);
2695 if (enable) {
2696 if (!info->rx_enabled)
2697 rx_start(info);
2698 else if (enable == 2) {
2699 /* force hunt mode (write 1 to RCR[3]) */
2700 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2702 } else {
2703 if (info->rx_enabled)
2704 rx_stop(info);
2706 spin_unlock_irqrestore(&info->lock,flags);
2707 return 0;
2711 * wait for specified event to occur
2713 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2715 unsigned long flags;
2716 int s;
2717 int rc=0;
2718 struct mgsl_icount cprev, cnow;
2719 int events;
2720 int mask;
2721 struct _input_signal_events oldsigs, newsigs;
2722 DECLARE_WAITQUEUE(wait, current);
2724 if (get_user(mask, mask_ptr))
2725 return -EFAULT;
2727 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2729 spin_lock_irqsave(&info->lock,flags);
2731 /* return immediately if state matches requested events */
2732 get_signals(info);
2733 s = info->signals;
2735 events = mask &
2736 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2737 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2738 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2739 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2740 if (events) {
2741 spin_unlock_irqrestore(&info->lock,flags);
2742 goto exit;
2745 /* save current irq counts */
2746 cprev = info->icount;
2747 oldsigs = info->input_signal_events;
2749 /* enable hunt and idle irqs if needed */
2750 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2751 unsigned short val = rd_reg16(info, SCR);
2752 if (!(val & IRQ_RXIDLE))
2753 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2756 set_current_state(TASK_INTERRUPTIBLE);
2757 add_wait_queue(&info->event_wait_q, &wait);
2759 spin_unlock_irqrestore(&info->lock,flags);
2761 for(;;) {
2762 schedule();
2763 if (signal_pending(current)) {
2764 rc = -ERESTARTSYS;
2765 break;
2768 /* get current irq counts */
2769 spin_lock_irqsave(&info->lock,flags);
2770 cnow = info->icount;
2771 newsigs = info->input_signal_events;
2772 set_current_state(TASK_INTERRUPTIBLE);
2773 spin_unlock_irqrestore(&info->lock,flags);
2775 /* if no change, wait aborted for some reason */
2776 if (newsigs.dsr_up == oldsigs.dsr_up &&
2777 newsigs.dsr_down == oldsigs.dsr_down &&
2778 newsigs.dcd_up == oldsigs.dcd_up &&
2779 newsigs.dcd_down == oldsigs.dcd_down &&
2780 newsigs.cts_up == oldsigs.cts_up &&
2781 newsigs.cts_down == oldsigs.cts_down &&
2782 newsigs.ri_up == oldsigs.ri_up &&
2783 newsigs.ri_down == oldsigs.ri_down &&
2784 cnow.exithunt == cprev.exithunt &&
2785 cnow.rxidle == cprev.rxidle) {
2786 rc = -EIO;
2787 break;
2790 events = mask &
2791 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2792 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2793 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2794 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2795 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2796 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2797 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2798 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2799 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2800 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2801 if (events)
2802 break;
2804 cprev = cnow;
2805 oldsigs = newsigs;
2808 remove_wait_queue(&info->event_wait_q, &wait);
2809 set_current_state(TASK_RUNNING);
2812 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2813 spin_lock_irqsave(&info->lock,flags);
2814 if (!waitqueue_active(&info->event_wait_q)) {
2815 /* disable enable exit hunt mode/idle rcvd IRQs */
2816 wr_reg16(info, SCR,
2817 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2819 spin_unlock_irqrestore(&info->lock,flags);
2821 exit:
2822 if (rc == 0)
2823 rc = put_user(events, mask_ptr);
2824 return rc;
2827 static int get_interface(struct slgt_info *info, int __user *if_mode)
2829 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2830 if (put_user(info->if_mode, if_mode))
2831 return -EFAULT;
2832 return 0;
2835 static int set_interface(struct slgt_info *info, int if_mode)
2837 unsigned long flags;
2838 unsigned short val;
2840 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2841 spin_lock_irqsave(&info->lock,flags);
2842 info->if_mode = if_mode;
2844 msc_set_vcr(info);
2846 /* TCR (tx control) 07 1=RTS driver control */
2847 val = rd_reg16(info, TCR);
2848 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2849 val |= BIT7;
2850 else
2851 val &= ~BIT7;
2852 wr_reg16(info, TCR, val);
2854 spin_unlock_irqrestore(&info->lock,flags);
2855 return 0;
2859 * set general purpose IO pin state and direction
2861 * user_gpio fields:
2862 * state each bit indicates a pin state
2863 * smask set bit indicates pin state to set
2864 * dir each bit indicates a pin direction (0=input, 1=output)
2865 * dmask set bit indicates pin direction to set
2867 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2869 unsigned long flags;
2870 struct gpio_desc gpio;
2871 __u32 data;
2873 if (!info->gpio_present)
2874 return -EINVAL;
2875 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2876 return -EFAULT;
2877 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2878 info->device_name, gpio.state, gpio.smask,
2879 gpio.dir, gpio.dmask));
2881 spin_lock_irqsave(&info->lock,flags);
2882 if (gpio.dmask) {
2883 data = rd_reg32(info, IODR);
2884 data |= gpio.dmask & gpio.dir;
2885 data &= ~(gpio.dmask & ~gpio.dir);
2886 wr_reg32(info, IODR, data);
2888 if (gpio.smask) {
2889 data = rd_reg32(info, IOVR);
2890 data |= gpio.smask & gpio.state;
2891 data &= ~(gpio.smask & ~gpio.state);
2892 wr_reg32(info, IOVR, data);
2894 spin_unlock_irqrestore(&info->lock,flags);
2896 return 0;
2900 * get general purpose IO pin state and direction
2902 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2904 struct gpio_desc gpio;
2905 if (!info->gpio_present)
2906 return -EINVAL;
2907 gpio.state = rd_reg32(info, IOVR);
2908 gpio.smask = 0xffffffff;
2909 gpio.dir = rd_reg32(info, IODR);
2910 gpio.dmask = 0xffffffff;
2911 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2912 return -EFAULT;
2913 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2914 info->device_name, gpio.state, gpio.dir));
2915 return 0;
2919 * conditional wait facility
2921 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2923 init_waitqueue_head(&w->q);
2924 init_waitqueue_entry(&w->wait, current);
2925 w->data = data;
2928 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2930 set_current_state(TASK_INTERRUPTIBLE);
2931 add_wait_queue(&w->q, &w->wait);
2932 w->next = *head;
2933 *head = w;
2936 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2938 struct cond_wait *w, *prev;
2939 remove_wait_queue(&cw->q, &cw->wait);
2940 set_current_state(TASK_RUNNING);
2941 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2942 if (w == cw) {
2943 if (prev != NULL)
2944 prev->next = w->next;
2945 else
2946 *head = w->next;
2947 break;
2952 static void flush_cond_wait(struct cond_wait **head)
2954 while (*head != NULL) {
2955 wake_up_interruptible(&(*head)->q);
2956 *head = (*head)->next;
2961 * wait for general purpose I/O pin(s) to enter specified state
2963 * user_gpio fields:
2964 * state - bit indicates target pin state
2965 * smask - set bit indicates watched pin
2967 * The wait ends when at least one watched pin enters the specified
2968 * state. When 0 (no error) is returned, user_gpio->state is set to the
2969 * state of all GPIO pins when the wait ends.
2971 * Note: Each pin may be a dedicated input, dedicated output, or
2972 * configurable input/output. The number and configuration of pins
2973 * varies with the specific adapter model. Only input pins (dedicated
2974 * or configured) can be monitored with this function.
2976 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2978 unsigned long flags;
2979 int rc = 0;
2980 struct gpio_desc gpio;
2981 struct cond_wait wait;
2982 u32 state;
2984 if (!info->gpio_present)
2985 return -EINVAL;
2986 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2987 return -EFAULT;
2988 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2989 info->device_name, gpio.state, gpio.smask));
2990 /* ignore output pins identified by set IODR bit */
2991 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2992 return -EINVAL;
2993 init_cond_wait(&wait, gpio.smask);
2995 spin_lock_irqsave(&info->lock, flags);
2996 /* enable interrupts for watched pins */
2997 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2998 /* get current pin states */
2999 state = rd_reg32(info, IOVR);
3001 if (gpio.smask & ~(state ^ gpio.state)) {
3002 /* already in target state */
3003 gpio.state = state;
3004 } else {
3005 /* wait for target state */
3006 add_cond_wait(&info->gpio_wait_q, &wait);
3007 spin_unlock_irqrestore(&info->lock, flags);
3008 schedule();
3009 if (signal_pending(current))
3010 rc = -ERESTARTSYS;
3011 else
3012 gpio.state = wait.data;
3013 spin_lock_irqsave(&info->lock, flags);
3014 remove_cond_wait(&info->gpio_wait_q, &wait);
3017 /* disable all GPIO interrupts if no waiting processes */
3018 if (info->gpio_wait_q == NULL)
3019 wr_reg32(info, IOER, 0);
3020 spin_unlock_irqrestore(&info->lock,flags);
3022 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3023 rc = -EFAULT;
3024 return rc;
3027 static int modem_input_wait(struct slgt_info *info,int arg)
3029 unsigned long flags;
3030 int rc;
3031 struct mgsl_icount cprev, cnow;
3032 DECLARE_WAITQUEUE(wait, current);
3034 /* save current irq counts */
3035 spin_lock_irqsave(&info->lock,flags);
3036 cprev = info->icount;
3037 add_wait_queue(&info->status_event_wait_q, &wait);
3038 set_current_state(TASK_INTERRUPTIBLE);
3039 spin_unlock_irqrestore(&info->lock,flags);
3041 for(;;) {
3042 schedule();
3043 if (signal_pending(current)) {
3044 rc = -ERESTARTSYS;
3045 break;
3048 /* get new irq counts */
3049 spin_lock_irqsave(&info->lock,flags);
3050 cnow = info->icount;
3051 set_current_state(TASK_INTERRUPTIBLE);
3052 spin_unlock_irqrestore(&info->lock,flags);
3054 /* if no change, wait aborted for some reason */
3055 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3056 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3057 rc = -EIO;
3058 break;
3061 /* check for change in caller specified modem input */
3062 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3063 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3064 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3065 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3066 rc = 0;
3067 break;
3070 cprev = cnow;
3072 remove_wait_queue(&info->status_event_wait_q, &wait);
3073 set_current_state(TASK_RUNNING);
3074 return rc;
3078 * return state of serial control and status signals
3080 static int tiocmget(struct tty_struct *tty, struct file *file)
3082 struct slgt_info *info = tty->driver_data;
3083 unsigned int result;
3084 unsigned long flags;
3086 spin_lock_irqsave(&info->lock,flags);
3087 get_signals(info);
3088 spin_unlock_irqrestore(&info->lock,flags);
3090 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3091 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3092 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3093 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3094 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3095 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3097 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3098 return result;
3102 * set modem control signals (DTR/RTS)
3104 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3105 * TIOCMSET = set/clear signal values
3106 * value bit mask for command
3108 static int tiocmset(struct tty_struct *tty, struct file *file,
3109 unsigned int set, unsigned int clear)
3111 struct slgt_info *info = tty->driver_data;
3112 unsigned long flags;
3114 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3116 if (set & TIOCM_RTS)
3117 info->signals |= SerialSignal_RTS;
3118 if (set & TIOCM_DTR)
3119 info->signals |= SerialSignal_DTR;
3120 if (clear & TIOCM_RTS)
3121 info->signals &= ~SerialSignal_RTS;
3122 if (clear & TIOCM_DTR)
3123 info->signals &= ~SerialSignal_DTR;
3125 spin_lock_irqsave(&info->lock,flags);
3126 set_signals(info);
3127 spin_unlock_irqrestore(&info->lock,flags);
3128 return 0;
3132 * block current process until the device is ready to open
3134 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3135 struct slgt_info *info)
3137 DECLARE_WAITQUEUE(wait, current);
3138 int retval;
3139 bool do_clocal = false;
3140 bool extra_count = false;
3141 unsigned long flags;
3143 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3145 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3146 /* nonblock mode is set or port is not enabled */
3147 info->flags |= ASYNC_NORMAL_ACTIVE;
3148 return 0;
3151 if (tty->termios->c_cflag & CLOCAL)
3152 do_clocal = true;
3154 /* Wait for carrier detect and the line to become
3155 * free (i.e., not in use by the callout). While we are in
3156 * this loop, info->count is dropped by one, so that
3157 * close() knows when to free things. We restore it upon
3158 * exit, either normal or abnormal.
3161 retval = 0;
3162 add_wait_queue(&info->open_wait, &wait);
3164 spin_lock_irqsave(&info->lock, flags);
3165 if (!tty_hung_up_p(filp)) {
3166 extra_count = true;
3167 info->count--;
3169 spin_unlock_irqrestore(&info->lock, flags);
3170 info->blocked_open++;
3172 while (1) {
3173 if ((tty->termios->c_cflag & CBAUD)) {
3174 spin_lock_irqsave(&info->lock,flags);
3175 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3176 set_signals(info);
3177 spin_unlock_irqrestore(&info->lock,flags);
3180 set_current_state(TASK_INTERRUPTIBLE);
3182 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3183 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3184 -EAGAIN : -ERESTARTSYS;
3185 break;
3188 spin_lock_irqsave(&info->lock,flags);
3189 get_signals(info);
3190 spin_unlock_irqrestore(&info->lock,flags);
3192 if (!(info->flags & ASYNC_CLOSING) &&
3193 (do_clocal || (info->signals & SerialSignal_DCD)) ) {
3194 break;
3197 if (signal_pending(current)) {
3198 retval = -ERESTARTSYS;
3199 break;
3202 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3203 schedule();
3206 set_current_state(TASK_RUNNING);
3207 remove_wait_queue(&info->open_wait, &wait);
3209 if (extra_count)
3210 info->count++;
3211 info->blocked_open--;
3213 if (!retval)
3214 info->flags |= ASYNC_NORMAL_ACTIVE;
3216 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3217 return retval;
3220 static int alloc_tmp_rbuf(struct slgt_info *info)
3222 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3223 if (info->tmp_rbuf == NULL)
3224 return -ENOMEM;
3225 return 0;
3228 static void free_tmp_rbuf(struct slgt_info *info)
3230 kfree(info->tmp_rbuf);
3231 info->tmp_rbuf = NULL;
3235 * allocate DMA descriptor lists.
3237 static int alloc_desc(struct slgt_info *info)
3239 unsigned int i;
3240 unsigned int pbufs;
3242 /* allocate memory to hold descriptor lists */
3243 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3244 if (info->bufs == NULL)
3245 return -ENOMEM;
3247 memset(info->bufs, 0, DESC_LIST_SIZE);
3249 info->rbufs = (struct slgt_desc*)info->bufs;
3250 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3252 pbufs = (unsigned int)info->bufs_dma_addr;
3255 * Build circular lists of descriptors
3258 for (i=0; i < info->rbuf_count; i++) {
3259 /* physical address of this descriptor */
3260 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3262 /* physical address of next descriptor */
3263 if (i == info->rbuf_count - 1)
3264 info->rbufs[i].next = cpu_to_le32(pbufs);
3265 else
3266 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3267 set_desc_count(info->rbufs[i], DMABUFSIZE);
3270 for (i=0; i < info->tbuf_count; i++) {
3271 /* physical address of this descriptor */
3272 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3274 /* physical address of next descriptor */
3275 if (i == info->tbuf_count - 1)
3276 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3277 else
3278 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3281 return 0;
3284 static void free_desc(struct slgt_info *info)
3286 if (info->bufs != NULL) {
3287 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3288 info->bufs = NULL;
3289 info->rbufs = NULL;
3290 info->tbufs = NULL;
3294 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3296 int i;
3297 for (i=0; i < count; i++) {
3298 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3299 return -ENOMEM;
3300 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3302 return 0;
3305 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3307 int i;
3308 for (i=0; i < count; i++) {
3309 if (bufs[i].buf == NULL)
3310 continue;
3311 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3312 bufs[i].buf = NULL;
3316 static int alloc_dma_bufs(struct slgt_info *info)
3318 info->rbuf_count = 32;
3319 info->tbuf_count = 32;
3321 if (alloc_desc(info) < 0 ||
3322 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3323 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3324 alloc_tmp_rbuf(info) < 0) {
3325 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3326 return -ENOMEM;
3328 reset_rbufs(info);
3329 return 0;
3332 static void free_dma_bufs(struct slgt_info *info)
3334 if (info->bufs) {
3335 free_bufs(info, info->rbufs, info->rbuf_count);
3336 free_bufs(info, info->tbufs, info->tbuf_count);
3337 free_desc(info);
3339 free_tmp_rbuf(info);
3342 static int claim_resources(struct slgt_info *info)
3344 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3345 DBGERR(("%s reg addr conflict, addr=%08X\n",
3346 info->device_name, info->phys_reg_addr));
3347 info->init_error = DiagStatus_AddressConflict;
3348 goto errout;
3350 else
3351 info->reg_addr_requested = true;
3353 info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3354 if (!info->reg_addr) {
3355 DBGERR(("%s cant map device registers, addr=%08X\n",
3356 info->device_name, info->phys_reg_addr));
3357 info->init_error = DiagStatus_CantAssignPciResources;
3358 goto errout;
3360 return 0;
3362 errout:
3363 release_resources(info);
3364 return -ENODEV;
3367 static void release_resources(struct slgt_info *info)
3369 if (info->irq_requested) {
3370 free_irq(info->irq_level, info);
3371 info->irq_requested = false;
3374 if (info->reg_addr_requested) {
3375 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3376 info->reg_addr_requested = false;
3379 if (info->reg_addr) {
3380 iounmap(info->reg_addr);
3381 info->reg_addr = NULL;
3385 /* Add the specified device instance data structure to the
3386 * global linked list of devices and increment the device count.
3388 static void add_device(struct slgt_info *info)
3390 char *devstr;
3392 info->next_device = NULL;
3393 info->line = slgt_device_count;
3394 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3396 if (info->line < MAX_DEVICES) {
3397 if (maxframe[info->line])
3398 info->max_frame_size = maxframe[info->line];
3399 info->dosyncppp = dosyncppp[info->line];
3402 slgt_device_count++;
3404 if (!slgt_device_list)
3405 slgt_device_list = info;
3406 else {
3407 struct slgt_info *current_dev = slgt_device_list;
3408 while(current_dev->next_device)
3409 current_dev = current_dev->next_device;
3410 current_dev->next_device = info;
3413 if (info->max_frame_size < 4096)
3414 info->max_frame_size = 4096;
3415 else if (info->max_frame_size > 65535)
3416 info->max_frame_size = 65535;
3418 switch(info->pdev->device) {
3419 case SYNCLINK_GT_DEVICE_ID:
3420 devstr = "GT";
3421 break;
3422 case SYNCLINK_GT2_DEVICE_ID:
3423 devstr = "GT2";
3424 break;
3425 case SYNCLINK_GT4_DEVICE_ID:
3426 devstr = "GT4";
3427 break;
3428 case SYNCLINK_AC_DEVICE_ID:
3429 devstr = "AC";
3430 info->params.mode = MGSL_MODE_ASYNC;
3431 break;
3432 default:
3433 devstr = "(unknown model)";
3435 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3436 devstr, info->device_name, info->phys_reg_addr,
3437 info->irq_level, info->max_frame_size);
3439 #if SYNCLINK_GENERIC_HDLC
3440 hdlcdev_init(info);
3441 #endif
3445 * allocate device instance structure, return NULL on failure
3447 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3449 struct slgt_info *info;
3451 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3453 if (!info) {
3454 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3455 driver_name, adapter_num, port_num));
3456 } else {
3457 info->magic = MGSL_MAGIC;
3458 INIT_WORK(&info->task, bh_handler);
3459 info->max_frame_size = 4096;
3460 info->raw_rx_size = DMABUFSIZE;
3461 info->close_delay = 5*HZ/10;
3462 info->closing_wait = 30*HZ;
3463 init_waitqueue_head(&info->open_wait);
3464 init_waitqueue_head(&info->close_wait);
3465 init_waitqueue_head(&info->status_event_wait_q);
3466 init_waitqueue_head(&info->event_wait_q);
3467 spin_lock_init(&info->netlock);
3468 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3469 info->idle_mode = HDLC_TXIDLE_FLAGS;
3470 info->adapter_num = adapter_num;
3471 info->port_num = port_num;
3473 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3474 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3476 /* Copy configuration info to device instance data */
3477 info->pdev = pdev;
3478 info->irq_level = pdev->irq;
3479 info->phys_reg_addr = pci_resource_start(pdev,0);
3481 info->bus_type = MGSL_BUS_TYPE_PCI;
3482 info->irq_flags = IRQF_SHARED;
3484 info->init_error = -1; /* assume error, set to 0 on successful init */
3487 return info;
3490 static void device_init(int adapter_num, struct pci_dev *pdev)
3492 struct slgt_info *port_array[SLGT_MAX_PORTS];
3493 int i;
3494 int port_count = 1;
3496 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3497 port_count = 2;
3498 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3499 port_count = 4;
3501 /* allocate device instances for all ports */
3502 for (i=0; i < port_count; ++i) {
3503 port_array[i] = alloc_dev(adapter_num, i, pdev);
3504 if (port_array[i] == NULL) {
3505 for (--i; i >= 0; --i)
3506 kfree(port_array[i]);
3507 return;
3511 /* give copy of port_array to all ports and add to device list */
3512 for (i=0; i < port_count; ++i) {
3513 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3514 add_device(port_array[i]);
3515 port_array[i]->port_count = port_count;
3516 spin_lock_init(&port_array[i]->lock);
3519 /* Allocate and claim adapter resources */
3520 if (!claim_resources(port_array[0])) {
3522 alloc_dma_bufs(port_array[0]);
3524 /* copy resource information from first port to others */
3525 for (i = 1; i < port_count; ++i) {
3526 port_array[i]->lock = port_array[0]->lock;
3527 port_array[i]->irq_level = port_array[0]->irq_level;
3528 port_array[i]->reg_addr = port_array[0]->reg_addr;
3529 alloc_dma_bufs(port_array[i]);
3532 if (request_irq(port_array[0]->irq_level,
3533 slgt_interrupt,
3534 port_array[0]->irq_flags,
3535 port_array[0]->device_name,
3536 port_array[0]) < 0) {
3537 DBGERR(("%s request_irq failed IRQ=%d\n",
3538 port_array[0]->device_name,
3539 port_array[0]->irq_level));
3540 } else {
3541 port_array[0]->irq_requested = true;
3542 adapter_test(port_array[0]);
3543 for (i=1 ; i < port_count ; i++) {
3544 port_array[i]->init_error = port_array[0]->init_error;
3545 port_array[i]->gpio_present = port_array[0]->gpio_present;
3550 for (i=0; i < port_count; ++i)
3551 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3554 static int __devinit init_one(struct pci_dev *dev,
3555 const struct pci_device_id *ent)
3557 if (pci_enable_device(dev)) {
3558 printk("error enabling pci device %p\n", dev);
3559 return -EIO;
3561 pci_set_master(dev);
3562 device_init(slgt_device_count, dev);
3563 return 0;
3566 static void __devexit remove_one(struct pci_dev *dev)
3570 static const struct tty_operations ops = {
3571 .open = open,
3572 .close = close,
3573 .write = write,
3574 .put_char = put_char,
3575 .flush_chars = flush_chars,
3576 .write_room = write_room,
3577 .chars_in_buffer = chars_in_buffer,
3578 .flush_buffer = flush_buffer,
3579 .ioctl = ioctl,
3580 .compat_ioctl = slgt_compat_ioctl,
3581 .throttle = throttle,
3582 .unthrottle = unthrottle,
3583 .send_xchar = send_xchar,
3584 .break_ctl = set_break,
3585 .wait_until_sent = wait_until_sent,
3586 .read_proc = read_proc,
3587 .set_termios = set_termios,
3588 .stop = tx_hold,
3589 .start = tx_release,
3590 .hangup = hangup,
3591 .tiocmget = tiocmget,
3592 .tiocmset = tiocmset,
3595 static void slgt_cleanup(void)
3597 int rc;
3598 struct slgt_info *info;
3599 struct slgt_info *tmp;
3601 printk("unload %s %s\n", driver_name, driver_version);
3603 if (serial_driver) {
3604 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3605 tty_unregister_device(serial_driver, info->line);
3606 if ((rc = tty_unregister_driver(serial_driver)))
3607 DBGERR(("tty_unregister_driver error=%d\n", rc));
3608 put_tty_driver(serial_driver);
3611 /* reset devices */
3612 info = slgt_device_list;
3613 while(info) {
3614 reset_port(info);
3615 info = info->next_device;
3618 /* release devices */
3619 info = slgt_device_list;
3620 while(info) {
3621 #if SYNCLINK_GENERIC_HDLC
3622 hdlcdev_exit(info);
3623 #endif
3624 free_dma_bufs(info);
3625 free_tmp_rbuf(info);
3626 if (info->port_num == 0)
3627 release_resources(info);
3628 tmp = info;
3629 info = info->next_device;
3630 kfree(tmp);
3633 if (pci_registered)
3634 pci_unregister_driver(&pci_driver);
3638 * Driver initialization entry point.
3640 static int __init slgt_init(void)
3642 int rc;
3644 printk("%s %s\n", driver_name, driver_version);
3646 serial_driver = alloc_tty_driver(MAX_DEVICES);
3647 if (!serial_driver) {
3648 printk("%s can't allocate tty driver\n", driver_name);
3649 return -ENOMEM;
3652 /* Initialize the tty_driver structure */
3654 serial_driver->owner = THIS_MODULE;
3655 serial_driver->driver_name = tty_driver_name;
3656 serial_driver->name = tty_dev_prefix;
3657 serial_driver->major = ttymajor;
3658 serial_driver->minor_start = 64;
3659 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3660 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3661 serial_driver->init_termios = tty_std_termios;
3662 serial_driver->init_termios.c_cflag =
3663 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3664 serial_driver->init_termios.c_ispeed = 9600;
3665 serial_driver->init_termios.c_ospeed = 9600;
3666 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3667 tty_set_operations(serial_driver, &ops);
3668 if ((rc = tty_register_driver(serial_driver)) < 0) {
3669 DBGERR(("%s can't register serial driver\n", driver_name));
3670 put_tty_driver(serial_driver);
3671 serial_driver = NULL;
3672 goto error;
3675 printk("%s %s, tty major#%d\n",
3676 driver_name, driver_version,
3677 serial_driver->major);
3679 slgt_device_count = 0;
3680 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3681 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3682 goto error;
3684 pci_registered = true;
3686 if (!slgt_device_list)
3687 printk("%s no devices found\n",driver_name);
3689 return 0;
3691 error:
3692 slgt_cleanup();
3693 return rc;
3696 static void __exit slgt_exit(void)
3698 slgt_cleanup();
3701 module_init(slgt_init);
3702 module_exit(slgt_exit);
3705 * register access routines
3708 #define CALC_REGADDR() \
3709 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3710 if (addr >= 0x80) \
3711 reg_addr += (info->port_num) * 32;
3713 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3715 CALC_REGADDR();
3716 return readb((void __iomem *)reg_addr);
3719 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3721 CALC_REGADDR();
3722 writeb(value, (void __iomem *)reg_addr);
3725 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3727 CALC_REGADDR();
3728 return readw((void __iomem *)reg_addr);
3731 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3733 CALC_REGADDR();
3734 writew(value, (void __iomem *)reg_addr);
3737 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3739 CALC_REGADDR();
3740 return readl((void __iomem *)reg_addr);
3743 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3745 CALC_REGADDR();
3746 writel(value, (void __iomem *)reg_addr);
3749 static void rdma_reset(struct slgt_info *info)
3751 unsigned int i;
3753 /* set reset bit */
3754 wr_reg32(info, RDCSR, BIT1);
3756 /* wait for enable bit cleared */
3757 for(i=0 ; i < 1000 ; i++)
3758 if (!(rd_reg32(info, RDCSR) & BIT0))
3759 break;
3762 static void tdma_reset(struct slgt_info *info)
3764 unsigned int i;
3766 /* set reset bit */
3767 wr_reg32(info, TDCSR, BIT1);
3769 /* wait for enable bit cleared */
3770 for(i=0 ; i < 1000 ; i++)
3771 if (!(rd_reg32(info, TDCSR) & BIT0))
3772 break;
3776 * enable internal loopback
3777 * TxCLK and RxCLK are generated from BRG
3778 * and TxD is looped back to RxD internally.
3780 static void enable_loopback(struct slgt_info *info)
3782 /* SCR (serial control) BIT2=looopback enable */
3783 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3785 if (info->params.mode != MGSL_MODE_ASYNC) {
3786 /* CCR (clock control)
3787 * 07..05 tx clock source (010 = BRG)
3788 * 04..02 rx clock source (010 = BRG)
3789 * 01 auxclk enable (0 = disable)
3790 * 00 BRG enable (1 = enable)
3792 * 0100 1001
3794 wr_reg8(info, CCR, 0x49);
3796 /* set speed if available, otherwise use default */
3797 if (info->params.clock_speed)
3798 set_rate(info, info->params.clock_speed);
3799 else
3800 set_rate(info, 3686400);
3805 * set baud rate generator to specified rate
3807 static void set_rate(struct slgt_info *info, u32 rate)
3809 unsigned int div;
3810 static unsigned int osc = 14745600;
3812 /* div = osc/rate - 1
3814 * Round div up if osc/rate is not integer to
3815 * force to next slowest rate.
3818 if (rate) {
3819 div = osc/rate;
3820 if (!(osc % rate) && div)
3821 div--;
3822 wr_reg16(info, BDR, (unsigned short)div);
3826 static void rx_stop(struct slgt_info *info)
3828 unsigned short val;
3830 /* disable and reset receiver */
3831 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3832 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3833 wr_reg16(info, RCR, val); /* clear reset bit */
3835 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3837 /* clear pending rx interrupts */
3838 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3840 rdma_reset(info);
3842 info->rx_enabled = false;
3843 info->rx_restart = false;
3846 static void rx_start(struct slgt_info *info)
3848 unsigned short val;
3850 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3852 /* clear pending rx overrun IRQ */
3853 wr_reg16(info, SSR, IRQ_RXOVER);
3855 /* reset and disable receiver */
3856 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3857 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3858 wr_reg16(info, RCR, val); /* clear reset bit */
3860 rdma_reset(info);
3861 reset_rbufs(info);
3863 /* set 1st descriptor address */
3864 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3866 if (info->params.mode != MGSL_MODE_ASYNC) {
3867 /* enable rx DMA and DMA interrupt */
3868 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3869 } else {
3870 /* enable saving of rx status, rx DMA and DMA interrupt */
3871 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3874 slgt_irq_on(info, IRQ_RXOVER);
3876 /* enable receiver */
3877 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3879 info->rx_restart = false;
3880 info->rx_enabled = true;
3883 static void tx_start(struct slgt_info *info)
3885 if (!info->tx_enabled) {
3886 wr_reg16(info, TCR,
3887 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3888 info->tx_enabled = true;
3891 if (info->tx_count) {
3892 info->drop_rts_on_tx_done = false;
3894 if (info->params.mode != MGSL_MODE_ASYNC) {
3895 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3896 get_signals(info);
3897 if (!(info->signals & SerialSignal_RTS)) {
3898 info->signals |= SerialSignal_RTS;
3899 set_signals(info);
3900 info->drop_rts_on_tx_done = true;
3904 slgt_irq_off(info, IRQ_TXDATA);
3905 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3906 /* clear tx idle and underrun status bits */
3907 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3908 if (info->params.mode == MGSL_MODE_HDLC)
3909 mod_timer(&info->tx_timer, jiffies +
3910 msecs_to_jiffies(5000));
3911 } else {
3912 slgt_irq_off(info, IRQ_TXDATA);
3913 slgt_irq_on(info, IRQ_TXIDLE);
3914 /* clear tx idle status bit */
3915 wr_reg16(info, SSR, IRQ_TXIDLE);
3917 tdma_start(info);
3918 info->tx_active = true;
3923 * start transmit DMA if inactive and there are unsent buffers
3925 static void tdma_start(struct slgt_info *info)
3927 unsigned int i;
3929 if (rd_reg32(info, TDCSR) & BIT0)
3930 return;
3932 /* transmit DMA inactive, check for unsent buffers */
3933 i = info->tbuf_start;
3934 while (!desc_count(info->tbufs[i])) {
3935 if (++i == info->tbuf_count)
3936 i = 0;
3937 if (i == info->tbuf_current)
3938 return;
3940 info->tbuf_start = i;
3942 /* there are unsent buffers, start transmit DMA */
3944 /* reset needed if previous error condition */
3945 tdma_reset(info);
3947 /* set 1st descriptor address */
3948 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3949 switch(info->params.mode) {
3950 case MGSL_MODE_RAW:
3951 case MGSL_MODE_MONOSYNC:
3952 case MGSL_MODE_BISYNC:
3953 wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3954 break;
3955 default:
3956 wr_reg32(info, TDCSR, BIT0); /* DMA enable */
3960 static void tx_stop(struct slgt_info *info)
3962 unsigned short val;
3964 del_timer(&info->tx_timer);
3966 tdma_reset(info);
3968 /* reset and disable transmitter */
3969 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
3970 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3972 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3974 /* clear tx idle and underrun status bit */
3975 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3977 reset_tbufs(info);
3979 info->tx_enabled = false;
3980 info->tx_active = false;
3983 static void reset_port(struct slgt_info *info)
3985 if (!info->reg_addr)
3986 return;
3988 tx_stop(info);
3989 rx_stop(info);
3991 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3992 set_signals(info);
3994 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3997 static void reset_adapter(struct slgt_info *info)
3999 int i;
4000 for (i=0; i < info->port_count; ++i) {
4001 if (info->port_array[i])
4002 reset_port(info->port_array[i]);
4006 static void async_mode(struct slgt_info *info)
4008 unsigned short val;
4010 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4011 tx_stop(info);
4012 rx_stop(info);
4014 /* TCR (tx control)
4016 * 15..13 mode, 010=async
4017 * 12..10 encoding, 000=NRZ
4018 * 09 parity enable
4019 * 08 1=odd parity, 0=even parity
4020 * 07 1=RTS driver control
4021 * 06 1=break enable
4022 * 05..04 character length
4023 * 00=5 bits
4024 * 01=6 bits
4025 * 10=7 bits
4026 * 11=8 bits
4027 * 03 0=1 stop bit, 1=2 stop bits
4028 * 02 reset
4029 * 01 enable
4030 * 00 auto-CTS enable
4032 val = 0x4000;
4034 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4035 val |= BIT7;
4037 if (info->params.parity != ASYNC_PARITY_NONE) {
4038 val |= BIT9;
4039 if (info->params.parity == ASYNC_PARITY_ODD)
4040 val |= BIT8;
4043 switch (info->params.data_bits)
4045 case 6: val |= BIT4; break;
4046 case 7: val |= BIT5; break;
4047 case 8: val |= BIT5 + BIT4; break;
4050 if (info->params.stop_bits != 1)
4051 val |= BIT3;
4053 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4054 val |= BIT0;
4056 wr_reg16(info, TCR, val);
4058 /* RCR (rx control)
4060 * 15..13 mode, 010=async
4061 * 12..10 encoding, 000=NRZ
4062 * 09 parity enable
4063 * 08 1=odd parity, 0=even parity
4064 * 07..06 reserved, must be 0
4065 * 05..04 character length
4066 * 00=5 bits
4067 * 01=6 bits
4068 * 10=7 bits
4069 * 11=8 bits
4070 * 03 reserved, must be zero
4071 * 02 reset
4072 * 01 enable
4073 * 00 auto-DCD enable
4075 val = 0x4000;
4077 if (info->params.parity != ASYNC_PARITY_NONE) {
4078 val |= BIT9;
4079 if (info->params.parity == ASYNC_PARITY_ODD)
4080 val |= BIT8;
4083 switch (info->params.data_bits)
4085 case 6: val |= BIT4; break;
4086 case 7: val |= BIT5; break;
4087 case 8: val |= BIT5 + BIT4; break;
4090 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4091 val |= BIT0;
4093 wr_reg16(info, RCR, val);
4095 /* CCR (clock control)
4097 * 07..05 011 = tx clock source is BRG/16
4098 * 04..02 010 = rx clock source is BRG
4099 * 01 0 = auxclk disabled
4100 * 00 1 = BRG enabled
4102 * 0110 1001
4104 wr_reg8(info, CCR, 0x69);
4106 msc_set_vcr(info);
4108 /* SCR (serial control)
4110 * 15 1=tx req on FIFO half empty
4111 * 14 1=rx req on FIFO half full
4112 * 13 tx data IRQ enable
4113 * 12 tx idle IRQ enable
4114 * 11 rx break on IRQ enable
4115 * 10 rx data IRQ enable
4116 * 09 rx break off IRQ enable
4117 * 08 overrun IRQ enable
4118 * 07 DSR IRQ enable
4119 * 06 CTS IRQ enable
4120 * 05 DCD IRQ enable
4121 * 04 RI IRQ enable
4122 * 03 reserved, must be zero
4123 * 02 1=txd->rxd internal loopback enable
4124 * 01 reserved, must be zero
4125 * 00 1=master IRQ enable
4127 val = BIT15 + BIT14 + BIT0;
4128 wr_reg16(info, SCR, val);
4130 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4132 set_rate(info, info->params.data_rate * 16);
4134 if (info->params.loopback)
4135 enable_loopback(info);
4138 static void sync_mode(struct slgt_info *info)
4140 unsigned short val;
4142 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4143 tx_stop(info);
4144 rx_stop(info);
4146 /* TCR (tx control)
4148 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4149 * 12..10 encoding
4150 * 09 CRC enable
4151 * 08 CRC32
4152 * 07 1=RTS driver control
4153 * 06 preamble enable
4154 * 05..04 preamble length
4155 * 03 share open/close flag
4156 * 02 reset
4157 * 01 enable
4158 * 00 auto-CTS enable
4160 val = 0;
4162 switch(info->params.mode) {
4163 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4164 case MGSL_MODE_BISYNC: val |= BIT15; break;
4165 case MGSL_MODE_RAW: val |= BIT13; break;
4167 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4168 val |= BIT7;
4170 switch(info->params.encoding)
4172 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4173 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4174 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4175 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4176 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4177 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4178 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4181 switch (info->params.crc_type & HDLC_CRC_MASK)
4183 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4184 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4187 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4188 val |= BIT6;
4190 switch (info->params.preamble_length)
4192 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4193 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4194 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4197 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4198 val |= BIT0;
4200 wr_reg16(info, TCR, val);
4202 /* TPR (transmit preamble) */
4204 switch (info->params.preamble)
4206 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4207 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4208 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4209 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4210 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4211 default: val = 0x7e; break;
4213 wr_reg8(info, TPR, (unsigned char)val);
4215 /* RCR (rx control)
4217 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4218 * 12..10 encoding
4219 * 09 CRC enable
4220 * 08 CRC32
4221 * 07..03 reserved, must be 0
4222 * 02 reset
4223 * 01 enable
4224 * 00 auto-DCD enable
4226 val = 0;
4228 switch(info->params.mode) {
4229 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4230 case MGSL_MODE_BISYNC: val |= BIT15; break;
4231 case MGSL_MODE_RAW: val |= BIT13; break;
4234 switch(info->params.encoding)
4236 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4237 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4238 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4239 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4240 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4241 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4242 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4245 switch (info->params.crc_type & HDLC_CRC_MASK)
4247 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4248 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4251 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4252 val |= BIT0;
4254 wr_reg16(info, RCR, val);
4256 /* CCR (clock control)
4258 * 07..05 tx clock source
4259 * 04..02 rx clock source
4260 * 01 auxclk enable
4261 * 00 BRG enable
4263 val = 0;
4265 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4267 // when RxC source is DPLL, BRG generates 16X DPLL
4268 // reference clock, so take TxC from BRG/16 to get
4269 // transmit clock at actual data rate
4270 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4271 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4272 else
4273 val |= BIT6; /* 010, txclk = BRG */
4275 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4276 val |= BIT7; /* 100, txclk = DPLL Input */
4277 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4278 val |= BIT5; /* 001, txclk = RXC Input */
4280 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4281 val |= BIT3; /* 010, rxclk = BRG */
4282 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4283 val |= BIT4; /* 100, rxclk = DPLL */
4284 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4285 val |= BIT2; /* 001, rxclk = TXC Input */
4287 if (info->params.clock_speed)
4288 val |= BIT1 + BIT0;
4290 wr_reg8(info, CCR, (unsigned char)val);
4292 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4294 // program DPLL mode
4295 switch(info->params.encoding)
4297 case HDLC_ENCODING_BIPHASE_MARK:
4298 case HDLC_ENCODING_BIPHASE_SPACE:
4299 val = BIT7; break;
4300 case HDLC_ENCODING_BIPHASE_LEVEL:
4301 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4302 val = BIT7 + BIT6; break;
4303 default: val = BIT6; // NRZ encodings
4305 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4307 // DPLL requires a 16X reference clock from BRG
4308 set_rate(info, info->params.clock_speed * 16);
4310 else
4311 set_rate(info, info->params.clock_speed);
4313 tx_set_idle(info);
4315 msc_set_vcr(info);
4317 /* SCR (serial control)
4319 * 15 1=tx req on FIFO half empty
4320 * 14 1=rx req on FIFO half full
4321 * 13 tx data IRQ enable
4322 * 12 tx idle IRQ enable
4323 * 11 underrun IRQ enable
4324 * 10 rx data IRQ enable
4325 * 09 rx idle IRQ enable
4326 * 08 overrun IRQ enable
4327 * 07 DSR IRQ enable
4328 * 06 CTS IRQ enable
4329 * 05 DCD IRQ enable
4330 * 04 RI IRQ enable
4331 * 03 reserved, must be zero
4332 * 02 1=txd->rxd internal loopback enable
4333 * 01 reserved, must be zero
4334 * 00 1=master IRQ enable
4336 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4338 if (info->params.loopback)
4339 enable_loopback(info);
4343 * set transmit idle mode
4345 static void tx_set_idle(struct slgt_info *info)
4347 unsigned char val;
4348 unsigned short tcr;
4350 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4351 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4353 tcr = rd_reg16(info, TCR);
4354 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4355 /* disable preamble, set idle size to 16 bits */
4356 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4357 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4358 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4359 } else if (!(tcr & BIT6)) {
4360 /* preamble is disabled, set idle size to 8 bits */
4361 tcr &= ~(BIT5 + BIT4);
4363 wr_reg16(info, TCR, tcr);
4365 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4366 /* LSB of custom tx idle specified in tx idle register */
4367 val = (unsigned char)(info->idle_mode & 0xff);
4368 } else {
4369 /* standard 8 bit idle patterns */
4370 switch(info->idle_mode)
4372 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4373 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4374 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4375 case HDLC_TXIDLE_ZEROS:
4376 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4377 default: val = 0xff;
4381 wr_reg8(info, TIR, val);
4385 * get state of V24 status (input) signals
4387 static void get_signals(struct slgt_info *info)
4389 unsigned short status = rd_reg16(info, SSR);
4391 /* clear all serial signals except DTR and RTS */
4392 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4394 if (status & BIT3)
4395 info->signals |= SerialSignal_DSR;
4396 if (status & BIT2)
4397 info->signals |= SerialSignal_CTS;
4398 if (status & BIT1)
4399 info->signals |= SerialSignal_DCD;
4400 if (status & BIT0)
4401 info->signals |= SerialSignal_RI;
4405 * set V.24 Control Register based on current configuration
4407 static void msc_set_vcr(struct slgt_info *info)
4409 unsigned char val = 0;
4411 /* VCR (V.24 control)
4413 * 07..04 serial IF select
4414 * 03 DTR
4415 * 02 RTS
4416 * 01 LL
4417 * 00 RL
4420 switch(info->if_mode & MGSL_INTERFACE_MASK)
4422 case MGSL_INTERFACE_RS232:
4423 val |= BIT5; /* 0010 */
4424 break;
4425 case MGSL_INTERFACE_V35:
4426 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4427 break;
4428 case MGSL_INTERFACE_RS422:
4429 val |= BIT6; /* 0100 */
4430 break;
4433 if (info->signals & SerialSignal_DTR)
4434 val |= BIT3;
4435 if (info->signals & SerialSignal_RTS)
4436 val |= BIT2;
4437 if (info->if_mode & MGSL_INTERFACE_LL)
4438 val |= BIT1;
4439 if (info->if_mode & MGSL_INTERFACE_RL)
4440 val |= BIT0;
4441 wr_reg8(info, VCR, val);
4445 * set state of V24 control (output) signals
4447 static void set_signals(struct slgt_info *info)
4449 unsigned char val = rd_reg8(info, VCR);
4450 if (info->signals & SerialSignal_DTR)
4451 val |= BIT3;
4452 else
4453 val &= ~BIT3;
4454 if (info->signals & SerialSignal_RTS)
4455 val |= BIT2;
4456 else
4457 val &= ~BIT2;
4458 wr_reg8(info, VCR, val);
4462 * free range of receive DMA buffers (i to last)
4464 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4466 int done = 0;
4468 while(!done) {
4469 /* reset current buffer for reuse */
4470 info->rbufs[i].status = 0;
4471 switch(info->params.mode) {
4472 case MGSL_MODE_RAW:
4473 case MGSL_MODE_MONOSYNC:
4474 case MGSL_MODE_BISYNC:
4475 set_desc_count(info->rbufs[i], info->raw_rx_size);
4476 break;
4477 default:
4478 set_desc_count(info->rbufs[i], DMABUFSIZE);
4481 if (i == last)
4482 done = 1;
4483 if (++i == info->rbuf_count)
4484 i = 0;
4486 info->rbuf_current = i;
4490 * mark all receive DMA buffers as free
4492 static void reset_rbufs(struct slgt_info *info)
4494 free_rbufs(info, 0, info->rbuf_count - 1);
4498 * pass receive HDLC frame to upper layer
4500 * return true if frame available, otherwise false
4502 static bool rx_get_frame(struct slgt_info *info)
4504 unsigned int start, end;
4505 unsigned short status;
4506 unsigned int framesize = 0;
4507 unsigned long flags;
4508 struct tty_struct *tty = info->tty;
4509 unsigned char addr_field = 0xff;
4510 unsigned int crc_size = 0;
4512 switch (info->params.crc_type & HDLC_CRC_MASK) {
4513 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4514 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4517 check_again:
4519 framesize = 0;
4520 addr_field = 0xff;
4521 start = end = info->rbuf_current;
4523 for (;;) {
4524 if (!desc_complete(info->rbufs[end]))
4525 goto cleanup;
4527 if (framesize == 0 && info->params.addr_filter != 0xff)
4528 addr_field = info->rbufs[end].buf[0];
4530 framesize += desc_count(info->rbufs[end]);
4532 if (desc_eof(info->rbufs[end]))
4533 break;
4535 if (++end == info->rbuf_count)
4536 end = 0;
4538 if (end == info->rbuf_current) {
4539 if (info->rx_enabled){
4540 spin_lock_irqsave(&info->lock,flags);
4541 rx_start(info);
4542 spin_unlock_irqrestore(&info->lock,flags);
4544 goto cleanup;
4548 /* status
4550 * 15 buffer complete
4551 * 14..06 reserved
4552 * 05..04 residue
4553 * 02 eof (end of frame)
4554 * 01 CRC error
4555 * 00 abort
4557 status = desc_status(info->rbufs[end]);
4559 /* ignore CRC bit if not using CRC (bit is undefined) */
4560 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4561 status &= ~BIT1;
4563 if (framesize == 0 ||
4564 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4565 free_rbufs(info, start, end);
4566 goto check_again;
4569 if (framesize < (2 + crc_size) || status & BIT0) {
4570 info->icount.rxshort++;
4571 framesize = 0;
4572 } else if (status & BIT1) {
4573 info->icount.rxcrc++;
4574 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4575 framesize = 0;
4578 #if SYNCLINK_GENERIC_HDLC
4579 if (framesize == 0) {
4580 struct net_device_stats *stats = hdlc_stats(info->netdev);
4581 stats->rx_errors++;
4582 stats->rx_frame_errors++;
4584 #endif
4586 DBGBH(("%s rx frame status=%04X size=%d\n",
4587 info->device_name, status, framesize));
4588 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
4590 if (framesize) {
4591 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4592 framesize -= crc_size;
4593 crc_size = 0;
4596 if (framesize > info->max_frame_size + crc_size)
4597 info->icount.rxlong++;
4598 else {
4599 /* copy dma buffer(s) to contiguous temp buffer */
4600 int copy_count = framesize;
4601 int i = start;
4602 unsigned char *p = info->tmp_rbuf;
4603 info->tmp_rbuf_count = framesize;
4605 info->icount.rxok++;
4607 while(copy_count) {
4608 int partial_count = min(copy_count, DMABUFSIZE);
4609 memcpy(p, info->rbufs[i].buf, partial_count);
4610 p += partial_count;
4611 copy_count -= partial_count;
4612 if (++i == info->rbuf_count)
4613 i = 0;
4616 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4617 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4618 framesize++;
4621 #if SYNCLINK_GENERIC_HDLC
4622 if (info->netcount)
4623 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4624 else
4625 #endif
4626 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4629 free_rbufs(info, start, end);
4630 return true;
4632 cleanup:
4633 return false;
4637 * pass receive buffer (RAW synchronous mode) to tty layer
4638 * return true if buffer available, otherwise false
4640 static bool rx_get_buf(struct slgt_info *info)
4642 unsigned int i = info->rbuf_current;
4643 unsigned int count;
4645 if (!desc_complete(info->rbufs[i]))
4646 return false;
4647 count = desc_count(info->rbufs[i]);
4648 switch(info->params.mode) {
4649 case MGSL_MODE_MONOSYNC:
4650 case MGSL_MODE_BISYNC:
4651 /* ignore residue in byte synchronous modes */
4652 if (desc_residue(info->rbufs[i]))
4653 count--;
4654 break;
4656 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4657 DBGINFO(("rx_get_buf size=%d\n", count));
4658 if (count)
4659 ldisc_receive_buf(info->tty, info->rbufs[i].buf,
4660 info->flag_buf, count);
4661 free_rbufs(info, i, i);
4662 return true;
4665 static void reset_tbufs(struct slgt_info *info)
4667 unsigned int i;
4668 info->tbuf_current = 0;
4669 for (i=0 ; i < info->tbuf_count ; i++) {
4670 info->tbufs[i].status = 0;
4671 info->tbufs[i].count = 0;
4676 * return number of free transmit DMA buffers
4678 static unsigned int free_tbuf_count(struct slgt_info *info)
4680 unsigned int count = 0;
4681 unsigned int i = info->tbuf_current;
4685 if (desc_count(info->tbufs[i]))
4686 break; /* buffer in use */
4687 ++count;
4688 if (++i == info->tbuf_count)
4689 i=0;
4690 } while (i != info->tbuf_current);
4692 /* if tx DMA active, last zero count buffer is in use */
4693 if (count && (rd_reg32(info, TDCSR) & BIT0))
4694 --count;
4696 return count;
4700 * load transmit DMA buffer(s) with data
4702 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4704 unsigned short count;
4705 unsigned int i;
4706 struct slgt_desc *d;
4708 if (size == 0)
4709 return;
4711 DBGDATA(info, buf, size, "tx");
4713 info->tbuf_start = i = info->tbuf_current;
4715 while (size) {
4716 d = &info->tbufs[i];
4717 if (++i == info->tbuf_count)
4718 i = 0;
4720 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4721 memcpy(d->buf, buf, count);
4723 size -= count;
4724 buf += count;
4727 * set EOF bit for last buffer of HDLC frame or
4728 * for every buffer in raw mode
4730 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4731 info->params.mode == MGSL_MODE_RAW)
4732 set_desc_eof(*d, 1);
4733 else
4734 set_desc_eof(*d, 0);
4736 set_desc_count(*d, count);
4739 info->tbuf_current = i;
4742 static int register_test(struct slgt_info *info)
4744 static unsigned short patterns[] =
4745 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4746 static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4747 unsigned int i;
4748 int rc = 0;
4750 for (i=0 ; i < count ; i++) {
4751 wr_reg16(info, TIR, patterns[i]);
4752 wr_reg16(info, BDR, patterns[(i+1)%count]);
4753 if ((rd_reg16(info, TIR) != patterns[i]) ||
4754 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4755 rc = -ENODEV;
4756 break;
4759 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4760 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4761 return rc;
4764 static int irq_test(struct slgt_info *info)
4766 unsigned long timeout;
4767 unsigned long flags;
4768 struct tty_struct *oldtty = info->tty;
4769 u32 speed = info->params.data_rate;
4771 info->params.data_rate = 921600;
4772 info->tty = NULL;
4774 spin_lock_irqsave(&info->lock, flags);
4775 async_mode(info);
4776 slgt_irq_on(info, IRQ_TXIDLE);
4778 /* enable transmitter */
4779 wr_reg16(info, TCR,
4780 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4782 /* write one byte and wait for tx idle */
4783 wr_reg16(info, TDR, 0);
4785 /* assume failure */
4786 info->init_error = DiagStatus_IrqFailure;
4787 info->irq_occurred = false;
4789 spin_unlock_irqrestore(&info->lock, flags);
4791 timeout=100;
4792 while(timeout-- && !info->irq_occurred)
4793 msleep_interruptible(10);
4795 spin_lock_irqsave(&info->lock,flags);
4796 reset_port(info);
4797 spin_unlock_irqrestore(&info->lock,flags);
4799 info->params.data_rate = speed;
4800 info->tty = oldtty;
4802 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4803 return info->irq_occurred ? 0 : -ENODEV;
4806 static int loopback_test_rx(struct slgt_info *info)
4808 unsigned char *src, *dest;
4809 int count;
4811 if (desc_complete(info->rbufs[0])) {
4812 count = desc_count(info->rbufs[0]);
4813 src = info->rbufs[0].buf;
4814 dest = info->tmp_rbuf;
4816 for( ; count ; count-=2, src+=2) {
4817 /* src=data byte (src+1)=status byte */
4818 if (!(*(src+1) & (BIT9 + BIT8))) {
4819 *dest = *src;
4820 dest++;
4821 info->tmp_rbuf_count++;
4824 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4825 return 1;
4827 return 0;
4830 static int loopback_test(struct slgt_info *info)
4832 #define TESTFRAMESIZE 20
4834 unsigned long timeout;
4835 u16 count = TESTFRAMESIZE;
4836 unsigned char buf[TESTFRAMESIZE];
4837 int rc = -ENODEV;
4838 unsigned long flags;
4840 struct tty_struct *oldtty = info->tty;
4841 MGSL_PARAMS params;
4843 memcpy(&params, &info->params, sizeof(params));
4845 info->params.mode = MGSL_MODE_ASYNC;
4846 info->params.data_rate = 921600;
4847 info->params.loopback = 1;
4848 info->tty = NULL;
4850 /* build and send transmit frame */
4851 for (count = 0; count < TESTFRAMESIZE; ++count)
4852 buf[count] = (unsigned char)count;
4854 info->tmp_rbuf_count = 0;
4855 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4857 /* program hardware for HDLC and enabled receiver */
4858 spin_lock_irqsave(&info->lock,flags);
4859 async_mode(info);
4860 rx_start(info);
4861 info->tx_count = count;
4862 tx_load(info, buf, count);
4863 tx_start(info);
4864 spin_unlock_irqrestore(&info->lock, flags);
4866 /* wait for receive complete */
4867 for (timeout = 100; timeout; --timeout) {
4868 msleep_interruptible(10);
4869 if (loopback_test_rx(info)) {
4870 rc = 0;
4871 break;
4875 /* verify received frame length and contents */
4876 if (!rc && (info->tmp_rbuf_count != count ||
4877 memcmp(buf, info->tmp_rbuf, count))) {
4878 rc = -ENODEV;
4881 spin_lock_irqsave(&info->lock,flags);
4882 reset_adapter(info);
4883 spin_unlock_irqrestore(&info->lock,flags);
4885 memcpy(&info->params, &params, sizeof(info->params));
4886 info->tty = oldtty;
4888 info->init_error = rc ? DiagStatus_DmaFailure : 0;
4889 return rc;
4892 static int adapter_test(struct slgt_info *info)
4894 DBGINFO(("testing %s\n", info->device_name));
4895 if (register_test(info) < 0) {
4896 printk("register test failure %s addr=%08X\n",
4897 info->device_name, info->phys_reg_addr);
4898 } else if (irq_test(info) < 0) {
4899 printk("IRQ test failure %s IRQ=%d\n",
4900 info->device_name, info->irq_level);
4901 } else if (loopback_test(info) < 0) {
4902 printk("loopback test failure %s\n", info->device_name);
4904 return info->init_error;
4908 * transmit timeout handler
4910 static void tx_timeout(unsigned long context)
4912 struct slgt_info *info = (struct slgt_info*)context;
4913 unsigned long flags;
4915 DBGINFO(("%s tx_timeout\n", info->device_name));
4916 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4917 info->icount.txtimeout++;
4919 spin_lock_irqsave(&info->lock,flags);
4920 info->tx_active = false;
4921 info->tx_count = 0;
4922 spin_unlock_irqrestore(&info->lock,flags);
4924 #if SYNCLINK_GENERIC_HDLC
4925 if (info->netcount)
4926 hdlcdev_tx_done(info);
4927 else
4928 #endif
4929 bh_transmit(info);
4933 * receive buffer polling timer
4935 static void rx_timeout(unsigned long context)
4937 struct slgt_info *info = (struct slgt_info*)context;
4938 unsigned long flags;
4940 DBGINFO(("%s rx_timeout\n", info->device_name));
4941 spin_lock_irqsave(&info->lock, flags);
4942 info->pending_bh |= BH_RECEIVE;
4943 spin_unlock_irqrestore(&info->lock, flags);
4944 bh_handler(&info->task);