PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / char / tpm / tpm_nsc.c
blobab18c1e7b115fd098ef56599241560d67fb19597
1 /*
2 * Copyright (C) 2004 IBM Corporation
4 * Authors:
5 * Leendert van Doorn <leendert@watson.ibm.com>
6 * Dave Safford <safford@watson.ibm.com>
7 * Reiner Sailer <sailer@watson.ibm.com>
8 * Kylene Hall <kjhall@us.ibm.com>
10 * Maintained by: <tpmdd-devel@lists.sourceforge.net>
12 * Device driver for TCG/TCPA TPM (trusted platform module).
13 * Specifications at www.trustedcomputinggroup.org
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation, version 2 of the
18 * License.
22 #include <linux/platform_device.h>
23 #include "tpm.h"
25 /* National definitions */
26 enum tpm_nsc_addr{
27 TPM_NSC_IRQ = 0x07,
28 TPM_NSC_BASE0_HI = 0x60,
29 TPM_NSC_BASE0_LO = 0x61,
30 TPM_NSC_BASE1_HI = 0x62,
31 TPM_NSC_BASE1_LO = 0x63
34 enum tpm_nsc_index {
35 NSC_LDN_INDEX = 0x07,
36 NSC_SID_INDEX = 0x20,
37 NSC_LDC_INDEX = 0x30,
38 NSC_DIO_INDEX = 0x60,
39 NSC_CIO_INDEX = 0x62,
40 NSC_IRQ_INDEX = 0x70,
41 NSC_ITS_INDEX = 0x71
44 enum tpm_nsc_status_loc {
45 NSC_STATUS = 0x01,
46 NSC_COMMAND = 0x01,
47 NSC_DATA = 0x00
50 /* status bits */
51 enum tpm_nsc_status {
52 NSC_STATUS_OBF = 0x01, /* output buffer full */
53 NSC_STATUS_IBF = 0x02, /* input buffer full */
54 NSC_STATUS_F0 = 0x04, /* F0 */
55 NSC_STATUS_A2 = 0x08, /* A2 */
56 NSC_STATUS_RDY = 0x10, /* ready to receive command */
57 NSC_STATUS_IBR = 0x20 /* ready to receive data */
60 /* command bits */
61 enum tpm_nsc_cmd_mode {
62 NSC_COMMAND_NORMAL = 0x01, /* normal mode */
63 NSC_COMMAND_EOC = 0x03,
64 NSC_COMMAND_CANCEL = 0x22
67 * Wait for a certain status to appear
69 static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
71 unsigned long stop;
73 /* status immediately available check */
74 *data = inb(chip->vendor.base + NSC_STATUS);
75 if ((*data & mask) == val)
76 return 0;
78 /* wait for status */
79 stop = jiffies + 10 * HZ;
80 do {
81 msleep(TPM_TIMEOUT);
82 *data = inb(chip->vendor.base + 1);
83 if ((*data & mask) == val)
84 return 0;
86 while (time_before(jiffies, stop));
88 return -EBUSY;
91 static int nsc_wait_for_ready(struct tpm_chip *chip)
93 int status;
94 unsigned long stop;
96 /* status immediately available check */
97 status = inb(chip->vendor.base + NSC_STATUS);
98 if (status & NSC_STATUS_OBF)
99 status = inb(chip->vendor.base + NSC_DATA);
100 if (status & NSC_STATUS_RDY)
101 return 0;
103 /* wait for status */
104 stop = jiffies + 100;
105 do {
106 msleep(TPM_TIMEOUT);
107 status = inb(chip->vendor.base + NSC_STATUS);
108 if (status & NSC_STATUS_OBF)
109 status = inb(chip->vendor.base + NSC_DATA);
110 if (status & NSC_STATUS_RDY)
111 return 0;
113 while (time_before(jiffies, stop));
115 dev_info(chip->dev, "wait for ready failed\n");
116 return -EBUSY;
120 static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
122 u8 *buffer = buf;
123 u8 data, *p;
124 u32 size;
125 __be32 *native_size;
127 if (count < 6)
128 return -EIO;
130 if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
131 dev_err(chip->dev, "F0 timeout\n");
132 return -EIO;
134 if ((data =
135 inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
136 dev_err(chip->dev, "not in normal mode (0x%x)\n",
137 data);
138 return -EIO;
141 /* read the whole packet */
142 for (p = buffer; p < &buffer[count]; p++) {
143 if (wait_for_stat
144 (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
145 dev_err(chip->dev,
146 "OBF timeout (while reading data)\n");
147 return -EIO;
149 if (data & NSC_STATUS_F0)
150 break;
151 *p = inb(chip->vendor.base + NSC_DATA);
154 if ((data & NSC_STATUS_F0) == 0 &&
155 (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
156 dev_err(chip->dev, "F0 not set\n");
157 return -EIO;
159 if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
160 dev_err(chip->dev,
161 "expected end of command(0x%x)\n", data);
162 return -EIO;
165 native_size = (__force __be32 *) (buf + 2);
166 size = be32_to_cpu(*native_size);
168 if (count < size)
169 return -EIO;
171 return size;
174 static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
176 u8 data;
177 int i;
180 * If we hit the chip with back to back commands it locks up
181 * and never set IBF. Hitting it with this "hammer" seems to
182 * fix it. Not sure why this is needed, we followed the flow
183 * chart in the manual to the letter.
185 outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
187 if (nsc_wait_for_ready(chip) != 0)
188 return -EIO;
190 if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
191 dev_err(chip->dev, "IBF timeout\n");
192 return -EIO;
195 outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
196 if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
197 dev_err(chip->dev, "IBR timeout\n");
198 return -EIO;
201 for (i = 0; i < count; i++) {
202 if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
203 dev_err(chip->dev,
204 "IBF timeout (while writing data)\n");
205 return -EIO;
207 outb(buf[i], chip->vendor.base + NSC_DATA);
210 if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
211 dev_err(chip->dev, "IBF timeout\n");
212 return -EIO;
214 outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
216 return count;
219 static void tpm_nsc_cancel(struct tpm_chip *chip)
221 outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
224 static u8 tpm_nsc_status(struct tpm_chip *chip)
226 return inb(chip->vendor.base + NSC_STATUS);
229 static const struct file_operations nsc_ops = {
230 .owner = THIS_MODULE,
231 .llseek = no_llseek,
232 .open = tpm_open,
233 .read = tpm_read,
234 .write = tpm_write,
235 .release = tpm_release,
238 static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
239 static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
240 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
241 static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel);
243 static struct attribute * nsc_attrs[] = {
244 &dev_attr_pubek.attr,
245 &dev_attr_pcrs.attr,
246 &dev_attr_caps.attr,
247 &dev_attr_cancel.attr,
248 NULL,
251 static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
253 static const struct tpm_vendor_specific tpm_nsc = {
254 .recv = tpm_nsc_recv,
255 .send = tpm_nsc_send,
256 .cancel = tpm_nsc_cancel,
257 .status = tpm_nsc_status,
258 .req_complete_mask = NSC_STATUS_OBF,
259 .req_complete_val = NSC_STATUS_OBF,
260 .req_canceled = NSC_STATUS_RDY,
261 .attr_group = &nsc_attr_grp,
262 .miscdev = { .fops = &nsc_ops, },
265 static struct platform_device *pdev = NULL;
267 static void tpm_nsc_remove(struct device *dev)
269 struct tpm_chip *chip = dev_get_drvdata(dev);
270 if ( chip ) {
271 release_region(chip->vendor.base, 2);
272 tpm_remove_hardware(chip->dev);
276 static struct device_driver nsc_drv = {
277 .name = "tpm_nsc",
278 .bus = &platform_bus_type,
279 .owner = THIS_MODULE,
280 .suspend = tpm_pm_suspend,
281 .resume = tpm_pm_resume,
284 static int __init init_nsc(void)
286 int rc = 0;
287 int lo, hi, err;
288 int nscAddrBase = TPM_ADDR;
289 struct tpm_chip *chip;
290 unsigned long base;
292 /* verify that it is a National part (SID) */
293 if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
294 nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
295 (tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
296 if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6)
297 return -ENODEV;
300 err = driver_register(&nsc_drv);
301 if (err)
302 return err;
304 hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
305 lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
306 base = (hi<<8) | lo;
308 /* enable the DPM module */
309 tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
311 pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
312 if (!pdev) {
313 rc = -ENOMEM;
314 goto err_unreg_drv;
317 pdev->name = "tpm_nscl0";
318 pdev->id = -1;
319 pdev->num_resources = 0;
320 pdev->dev.release = tpm_nsc_remove;
321 pdev->dev.driver = &nsc_drv;
323 if ((rc = platform_device_register(pdev)) < 0)
324 goto err_free_dev;
326 if (request_region(base, 2, "tpm_nsc0") == NULL ) {
327 rc = -EBUSY;
328 goto err_unreg_dev;
331 if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
332 rc = -ENODEV;
333 goto err_rel_reg;
336 dev_dbg(&pdev->dev, "NSC TPM detected\n");
337 dev_dbg(&pdev->dev,
338 "NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
339 tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
340 tpm_read_index(nscAddrBase,0x27));
341 dev_dbg(&pdev->dev,
342 "NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
343 tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
344 tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
345 dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n",
346 (tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
347 dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n",
348 (tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
349 dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n",
350 tpm_read_index(nscAddrBase,0x70));
351 dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n",
352 tpm_read_index(nscAddrBase,0x71));
353 dev_dbg(&pdev->dev,
354 "NSC DMA channel select0 0x%x, select1 0x%x\n",
355 tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
356 dev_dbg(&pdev->dev,
357 "NSC Config "
358 "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
359 tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
360 tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
361 tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
362 tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
363 tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
365 dev_info(&pdev->dev,
366 "NSC TPM revision %d\n",
367 tpm_read_index(nscAddrBase, 0x27) & 0x1F);
369 chip->vendor.base = base;
371 return 0;
373 err_rel_reg:
374 release_region(base, 2);
375 err_unreg_dev:
376 platform_device_unregister(pdev);
377 err_free_dev:
378 kfree(pdev);
379 err_unreg_drv:
380 driver_unregister(&nsc_drv);
381 return rc;
384 static void __exit cleanup_nsc(void)
386 if (pdev) {
387 tpm_nsc_remove(&pdev->dev);
388 platform_device_unregister(pdev);
389 kfree(pdev);
390 pdev = NULL;
393 driver_unregister(&nsc_drv);
396 module_init(init_nsc);
397 module_exit(cleanup_nsc);
399 MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
400 MODULE_DESCRIPTION("TPM Driver");
401 MODULE_VERSION("2.0");
402 MODULE_LICENSE("GPL");