?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / char / vme_scc.c
blobf17ac043b551ee3bc6deb01148d45baac2bd2f2d
1 /*
2 * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
3 * implementation.
4 * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
5 *
6 * Based on atari_SCC.c which was
7 * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
8 * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
9 *
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive
12 * for more details.
13 *
14 */
15
16 #include <linux/module.h>
17 #include <linux/kdev_t.h>
18 #include <asm/io.h>
19 #include <linux/kernel.h>
20 #include <linux/ioport.h>
21 #include <linux/interrupt.h>
22 #include <linux/errno.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/mm.h>
26 #include <linux/serial.h>
27 #include <linux/fcntl.h>
28 #include <linux/major.h>
29 #include <linux/delay.h>
30 #include <linux/slab.h>
31 #include <linux/miscdevice.h>
32 #include <linux/console.h>
33 #include <linux/init.h>
34 #include <asm/setup.h>
35 #include <asm/bootinfo.h>
36
37 #ifdef CONFIG_MVME147_SCC
38 #include <asm/mvme147hw.h>
39 #endif
40 #ifdef CONFIG_MVME162_SCC
41 #include <asm/mvme16xhw.h>
42 #endif
43 #ifdef CONFIG_BVME6000_SCC
44 #include <asm/bvme6000hw.h>
45 #endif
46
47 #include <linux/generic_serial.h>
48 #include "scc.h"
49
50
51 #define CHANNEL_A 0
52 #define CHANNEL_B 1
53
54 #define SCC_MINOR_BASE 64
55
56 /* Shadows for all SCC write registers */
57 static unsigned char scc_shadow[2][16];
58
59 /* Location to access for SCC register access delay */
60 static volatile unsigned char *scc_del = NULL;
61
62 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
63 static unsigned char scc_last_status_reg[2];
64
65 /***************************** Prototypes *****************************/
66
67 /* Function prototypes */
68 static void scc_disable_tx_interrupts(void * ptr);
69 static void scc_enable_tx_interrupts(void * ptr);
70 static void scc_disable_rx_interrupts(void * ptr);
71 static void scc_enable_rx_interrupts(void * ptr);
72 static int scc_get_CD(void * ptr);
73 static void scc_shutdown_port(void * ptr);
74 static int scc_set_real_termios(void *ptr);
75 static void scc_hungup(void *ptr);
76 static void scc_close(void *ptr);
77 static int scc_chars_in_buffer(void * ptr);
78 static int scc_open(struct tty_struct * tty, struct file * filp);
79 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
80 unsigned int cmd, unsigned long arg);
81 static void scc_throttle(struct tty_struct *tty);
82 static void scc_unthrottle(struct tty_struct *tty);
83 static irqreturn_t scc_tx_int(int irq, void *data);
84 static irqreturn_t scc_rx_int(int irq, void *data);
85 static irqreturn_t scc_stat_int(int irq, void *data);
86 static irqreturn_t scc_spcond_int(int irq, void *data);
87 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
88 static void scc_break_ctl(struct tty_struct *tty, int break_state);
89
90 static struct tty_driver *scc_driver;
91
92 static struct scc_port scc_ports[2];
93
94 /*---------------------------------------------------------------------------
95 * Interface from generic_serial.c back here
96 *--------------------------------------------------------------------------*/
97
98 static struct real_driver scc_real_driver = {
99 scc_disable_tx_interrupts,
100 scc_enable_tx_interrupts,
101 scc_disable_rx_interrupts,
102 scc_enable_rx_interrupts,
103 scc_get_CD,
104 scc_shutdown_port,
105 scc_set_real_termios,
106 scc_chars_in_buffer,
107 scc_close,
108 scc_hungup,
109 NULL
110 };
111
112
113 static const struct tty_operations scc_ops = {
114 .open = scc_open,
115 .close = gs_close,
116 .write = gs_write,
117 .put_char = gs_put_char,
118 .flush_chars = gs_flush_chars,
119 .write_room = gs_write_room,
120 .chars_in_buffer = gs_chars_in_buffer,
121 .flush_buffer = gs_flush_buffer,
122 .ioctl = scc_ioctl,
123 .throttle = scc_throttle,
124 .unthrottle = scc_unthrottle,
125 .set_termios = gs_set_termios,
126 .stop = gs_stop,
127 .start = gs_start,
128 .hangup = gs_hangup,
129 .break_ctl = scc_break_ctl,
130 };
131
132 /*----------------------------------------------------------------------------
133 * vme_scc_init() and support functions
134 *---------------------------------------------------------------------------*/
135
136 static int scc_init_drivers(void)
137 {
138 int error;
139
140 scc_driver = alloc_tty_driver(2);
141 if (!scc_driver)
142 return -ENOMEM;
143 scc_driver->owner = THIS_MODULE;
144 scc_driver->driver_name = "scc";
145 scc_driver->name = "ttyS";
146 scc_driver->major = TTY_MAJOR;
147 scc_driver->minor_start = SCC_MINOR_BASE;
148 scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
149 scc_driver->subtype = SERIAL_TYPE_NORMAL;
150 scc_driver->init_termios = tty_std_termios;
151 scc_driver->init_termios.c_cflag =
152 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
153 scc_driver->init_termios.c_ispeed = 9600;
154 scc_driver->init_termios.c_ospeed = 9600;
155 scc_driver->flags = TTY_DRIVER_REAL_RAW;
156 tty_set_operations(scc_driver, &scc_ops);
157
158 if ((error = tty_register_driver(scc_driver))) {
159 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
160 error);
161 put_tty_driver(scc_driver);
162 return 1;
163 }
164
165 return 0;
166 }
167
168
169 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
170 */
171
172 static void scc_init_portstructs(void)
173 {
174 struct scc_port *port;
175 int i;
176
177 for (i = 0; i < 2; i++) {
178 port = scc_ports + i;
179 port->gs.magic = SCC_MAGIC;
180 port->gs.close_delay = HZ/2;
181 port->gs.closing_wait = 30 * HZ;
182 port->gs.rd = &scc_real_driver;
183 #ifdef NEW_WRITE_LOCKING
184 port->gs.port_write_mutex = MUTEX;
185 #endif
186 init_waitqueue_head(&port->gs.open_wait);
187 init_waitqueue_head(&port->gs.close_wait);
188 }
189 }
190
191
192 #ifdef CONFIG_MVME147_SCC
193 static int mvme147_scc_init(void)
194 {
195 struct scc_port *port;
196
197 printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
198 /* Init channel A */
199 port = &scc_ports[0];
200 port->channel = CHANNEL_A;
201 port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
202 port->datap = port->ctrlp + 1;
203 port->port_a = &scc_ports[0];
204 port->port_b = &scc_ports[1];
205 request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
206 "SCC-A TX", port);
207 request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
208 "SCC-A status", port);
209 request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
210 "SCC-A RX", port);
211 request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
212 "SCC-A special cond", port);
213 {
214 SCC_ACCESS_INIT(port);
215
216 /* disable interrupts for this channel */
217 SCCwrite(INT_AND_DMA_REG, 0);
218 /* Set the interrupt vector */
219 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
220 /* Interrupt parameters: vector includes status, status low */
221 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
222 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
223 }
224
225 /* Init channel B */
226 port = &scc_ports[1];
227 port->channel = CHANNEL_B;
228 port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
229 port->datap = port->ctrlp + 1;
230 port->port_a = &scc_ports[0];
231 port->port_b = &scc_ports[1];
232 request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
233 "SCC-B TX", port);
234 request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
235 "SCC-B status", port);
236 request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
237 "SCC-B RX", port);
238 request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
239 "SCC-B special cond", port);
240 {
241 SCC_ACCESS_INIT(port);
242
243 /* disable interrupts for this channel */
244 SCCwrite(INT_AND_DMA_REG, 0);
245 }
246
247 /* Ensure interrupts are enabled in the PCC chip */
248 m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
249
250 /* Initialise the tty driver structures and register */
251 scc_init_portstructs();
252 scc_init_drivers();
253
254 return 0;
255 }
256 #endif
257
258
259 #ifdef CONFIG_MVME162_SCC
260 static int mvme162_scc_init(void)
261 {
262 struct scc_port *port;
263
264 if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
265 return (-ENODEV);
266
267 printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
268 /* Init channel A */
269 port = &scc_ports[0];
270 port->channel = CHANNEL_A;
271 port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
272 port->datap = port->ctrlp + 2;
273 port->port_a = &scc_ports[0];
274 port->port_b = &scc_ports[1];
275 request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
276 "SCC-A TX", port);
277 request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
278 "SCC-A status", port);
279 request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
280 "SCC-A RX", port);
281 request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
282 "SCC-A special cond", port);
283 {
284 SCC_ACCESS_INIT(port);
285
286 /* disable interrupts for this channel */
287 SCCwrite(INT_AND_DMA_REG, 0);
288 /* Set the interrupt vector */
289 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
290 /* Interrupt parameters: vector includes status, status low */
291 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
292 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
293 }
294
295 /* Init channel B */
296 port = &scc_ports[1];
297 port->channel = CHANNEL_B;
298 port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
299 port->datap = port->ctrlp + 2;
300 port->port_a = &scc_ports[0];
301 port->port_b = &scc_ports[1];
302 request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
303 "SCC-B TX", port);
304 request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
305 "SCC-B status", port);
306 request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
307 "SCC-B RX", port);
308 request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
309 "SCC-B special cond", port);
310
311 {
312 SCC_ACCESS_INIT(port); /* Either channel will do */
313
314 /* disable interrupts for this channel */
315 SCCwrite(INT_AND_DMA_REG, 0);
316 }
317
318 /* Ensure interrupts are enabled in the MC2 chip */
319 *(volatile char *)0xfff4201d = 0x14;
320
321 /* Initialise the tty driver structures and register */
322 scc_init_portstructs();
323 scc_init_drivers();
324
325 return 0;
326 }
327 #endif
328
329
330 #ifdef CONFIG_BVME6000_SCC
331 static int bvme6000_scc_init(void)
332 {
333 struct scc_port *port;
334
335 printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
336 /* Init channel A */
337 port = &scc_ports[0];
338 port->channel = CHANNEL_A;
339 port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
340 port->datap = port->ctrlp + 4;
341 port->port_a = &scc_ports[0];
342 port->port_b = &scc_ports[1];
343 request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
344 "SCC-A TX", port);
345 request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
346 "SCC-A status", port);
347 request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
348 "SCC-A RX", port);
349 request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
350 "SCC-A special cond", port);
351 {
352 SCC_ACCESS_INIT(port);
353
354 /* disable interrupts for this channel */
355 SCCwrite(INT_AND_DMA_REG, 0);
356 /* Set the interrupt vector */
357 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
358 /* Interrupt parameters: vector includes status, status low */
359 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
360 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
361 }
362
363 /* Init channel B */
364 port = &scc_ports[1];
365 port->channel = CHANNEL_B;
366 port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
367 port->datap = port->ctrlp + 4;
368 port->port_a = &scc_ports[0];
369 port->port_b = &scc_ports[1];
370 request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
371 "SCC-B TX", port);
372 request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
373 "SCC-B status", port);
374 request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
375 "SCC-B RX", port);
376 request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
377 "SCC-B special cond", port);
378
379 {
380 SCC_ACCESS_INIT(port); /* Either channel will do */
381
382 /* disable interrupts for this channel */
383 SCCwrite(INT_AND_DMA_REG, 0);
384 }
385
386 /* Initialise the tty driver structures and register */
387 scc_init_portstructs();
388 scc_init_drivers();
389
390 return 0;
391 }
392 #endif
393
394
395 static int vme_scc_init(void)
396 {
397 int res = -ENODEV;
398
399 #ifdef CONFIG_MVME147_SCC
400 if (MACH_IS_MVME147)
401 res = mvme147_scc_init();
402 #endif
403 #ifdef CONFIG_MVME162_SCC
404 if (MACH_IS_MVME16x)
405 res = mvme162_scc_init();
406 #endif
407 #ifdef CONFIG_BVME6000_SCC
408 if (MACH_IS_BVME6000)
409 res = bvme6000_scc_init();
410 #endif
411 return res;
412 }
413
414 module_init(vme_scc_init);
415
416
417 /*---------------------------------------------------------------------------
418 * Interrupt handlers
419 *--------------------------------------------------------------------------*/
420
421 static irqreturn_t scc_rx_int(int irq, void *data)
422 {
423 unsigned char ch;
424 struct scc_port *port = data;
425 struct tty_struct *tty = port->gs.tty;
426 SCC_ACCESS_INIT(port);
427
428 ch = SCCread_NB(RX_DATA_REG);
429 if (!tty) {
430 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
431 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
432 return IRQ_HANDLED;
433 }
434 tty_insert_flip_char(tty, ch, 0);
435
436 /* Check if another character is already ready; in that case, the
437 * spcond_int() function must be used, because this character may have an
438 * error condition that isn't signalled by the interrupt vector used!
439 */
440 if (SCCread(INT_PENDING_REG) &
441 (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
442 scc_spcond_int (irq, data);
443 return IRQ_HANDLED;
444 }
445
446 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
447
448 tty_flip_buffer_push(tty);
449 return IRQ_HANDLED;
450 }
451
452
453 static irqreturn_t scc_spcond_int(int irq, void *data)
454 {
455 struct scc_port *port = data;
456 struct tty_struct *tty = port->gs.tty;
457 unsigned char stat, ch, err;
458 int int_pending_mask = port->channel == CHANNEL_A ?
459 IPR_A_RX : IPR_B_RX;
460 SCC_ACCESS_INIT(port);
461
462 if (!tty) {
463 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
464 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
465 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
466 return IRQ_HANDLED;
467 }
468 do {
469 stat = SCCread(SPCOND_STATUS_REG);
470 ch = SCCread_NB(RX_DATA_REG);
471
472 if (stat & SCSR_RX_OVERRUN)
473 err = TTY_OVERRUN;
474 else if (stat & SCSR_PARITY_ERR)
475 err = TTY_PARITY;
476 else if (stat & SCSR_CRC_FRAME_ERR)
477 err = TTY_FRAME;
478 else
479 err = 0;
480
481 tty_insert_flip_char(tty, ch, err);
482
483 /* ++TeSche: *All* errors have to be cleared manually,
484 * else the condition persists for the next chars
485 */
486 if (err)
487 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
488
489 } while(SCCread(INT_PENDING_REG) & int_pending_mask);
490
491 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
492
493 tty_flip_buffer_push(tty);
494 return IRQ_HANDLED;
495 }
496
497
498 static irqreturn_t scc_tx_int(int irq, void *data)
499 {
500 struct scc_port *port = data;
501 SCC_ACCESS_INIT(port);
502
503 if (!port->gs.tty) {
504 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
505 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
506 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
507 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
508 return IRQ_HANDLED;
509 }
510 while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
511 if (port->x_char) {
512 SCCwrite(TX_DATA_REG, port->x_char);
513 port->x_char = 0;
514 }
515 else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
516 port->gs.tty->hw_stopped)
517 break;
518 else {
519 SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
520 port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
521 if (--port->gs.xmit_cnt <= 0)
522 break;
523 }
524 }
525 if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
526 port->gs.tty->hw_stopped) {
527 /* disable tx interrupts */
528 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
529 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */
530 port->gs.flags &= ~GS_TX_INTEN;
531 }
532 if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
533 tty_wakeup(port->gs.tty);
534
535 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
536 return IRQ_HANDLED;
537 }
538
539
540 static irqreturn_t scc_stat_int(int irq, void *data)
541 {
542 struct scc_port *port = data;
543 unsigned channel = port->channel;
544 unsigned char last_sr, sr, changed;
545 SCC_ACCESS_INIT(port);
546
547 last_sr = scc_last_status_reg[channel];
548 sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
549 changed = last_sr ^ sr;
550
551 if (changed & SR_DCD) {
552 port->c_dcd = !!(sr & SR_DCD);
553 if (!(port->gs.flags & ASYNC_CHECK_CD))
554 ; /* Don't report DCD changes */
555 else if (port->c_dcd) {
556 wake_up_interruptible(&port->gs.open_wait);
557 }
558 else {
559 if (port->gs.tty)
560 tty_hangup (port->gs.tty);
561 }
562 }
563 SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
564 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
565 return IRQ_HANDLED;
566 }
567
568
569 /*---------------------------------------------------------------------------
570 * generic_serial.c callback funtions
571 *--------------------------------------------------------------------------*/
572
573 static void scc_disable_tx_interrupts(void *ptr)
574 {
575 struct scc_port *port = ptr;
576 unsigned long flags;
577 SCC_ACCESS_INIT(port);
578
579 local_irq_save(flags);
580 SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
581 port->gs.flags &= ~GS_TX_INTEN;
582 local_irq_restore(flags);
583 }
584
585
586 static void scc_enable_tx_interrupts(void *ptr)
587 {
588 struct scc_port *port = ptr;
589 unsigned long flags;
590 SCC_ACCESS_INIT(port);
591
592 local_irq_save(flags);
593 SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
594 /* restart the transmitter */
595 scc_tx_int (0, port);
596 local_irq_restore(flags);
597 }
598
599
600 static void scc_disable_rx_interrupts(void *ptr)
601 {
602 struct scc_port *port = ptr;
603 unsigned long flags;
604 SCC_ACCESS_INIT(port);
605
606 local_irq_save(flags);
607 SCCmod(INT_AND_DMA_REG,
608 ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
609 local_irq_restore(flags);
610 }
611
612
613 static void scc_enable_rx_interrupts(void *ptr)
614 {
615 struct scc_port *port = ptr;
616 unsigned long flags;
617 SCC_ACCESS_INIT(port);
618
619 local_irq_save(flags);
620 SCCmod(INT_AND_DMA_REG, 0xff,
621 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
622 local_irq_restore(flags);
623 }
624
625
626 static int scc_get_CD(void *ptr)
627 {
628 struct scc_port *port = ptr;
629 unsigned channel = port->channel;
630
631 return !!(scc_last_status_reg[channel] & SR_DCD);
632 }
633
634
635 static void scc_shutdown_port(void *ptr)
636 {
637 struct scc_port *port = ptr;
638
639 port->gs.flags &= ~ GS_ACTIVE;
640 if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
641 scc_setsignals (port, 0, 0);
642 }
643 }
644
645
646 static int scc_set_real_termios (void *ptr)
647 {
648 /* the SCC has char sizes 5,7,6,8 in that order! */
649 static int chsize_map[4] = { 0, 2, 1, 3 };
650 unsigned cflag, baud, chsize, channel, brgval = 0;
651 unsigned long flags;
652 struct scc_port *port = ptr;
653 SCC_ACCESS_INIT(port);
654
655 if (!port->gs.tty || !port->gs.tty->termios) return 0;
656
657 channel = port->channel;
658
659 if (channel == CHANNEL_A)
660 return 0; /* Settings controlled by boot PROM */
661
662 cflag = port->gs.tty->termios->c_cflag;
663 baud = port->gs.baud;
664 chsize = (cflag & CSIZE) >> 4;
665
666 if (baud == 0) {
667 /* speed == 0 -> drop DTR */
668 local_irq_save(flags);
669 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
670 local_irq_restore(flags);
671 return 0;
672 }
673 else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
674 (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
675 (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
676 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
677 return 0;
678 }
679
680 if (cflag & CLOCAL)
681 port->gs.flags &= ~ASYNC_CHECK_CD;
682 else
683 port->gs.flags |= ASYNC_CHECK_CD;
684
685 #ifdef CONFIG_MVME147_SCC
686 if (MACH_IS_MVME147)
687 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
688 #endif
689 #ifdef CONFIG_MVME162_SCC
690 if (MACH_IS_MVME16x)
691 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
692 #endif
693 #ifdef CONFIG_BVME6000_SCC
694 if (MACH_IS_BVME6000)
695 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
696 #endif
697 /* Now we have all parameters and can go to set them: */
698 local_irq_save(flags);
699
700 /* receiver's character size and auto-enables */
701 SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
702 (chsize_map[chsize] << 6) |
703 ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
704 /* parity and stop bits (both, Tx and Rx), clock mode never changes */
705 SCCmod (AUX1_CTRL_REG,
706 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
707 ((cflag & PARENB
708 ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
709 : A1CR_PARITY_NONE)
710 | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
711 /* sender's character size, set DTR for valid baud rate */
712 SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
713 /* clock sources never change */
714 /* disable BRG before changing the value */
715 SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
716 /* BRG value */
717 SCCwrite(TIMER_LOW_REG, brgval & 0xff);
718 SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
719 /* BRG enable, and clock source never changes */
720 SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
721
722 local_irq_restore(flags);
723
724 return 0;
725 }
726
727
728 static int scc_chars_in_buffer (void *ptr)
729 {
730 struct scc_port *port = ptr;
731 SCC_ACCESS_INIT(port);
732
733 return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1;
734 }
735
736
737 /* Comment taken from sx.c (2.4.0):
738 I haven't the foggiest why the decrement use count has to happen
739 here. The whole linux serial drivers stuff needs to be redesigned.
740 My guess is that this is a hack to minimize the impact of a bug
741 elsewhere. Thinking about it some more. (try it sometime) Try
742 running minicom on a serial port that is driven by a modularized
743 driver. Have the modem hangup. Then remove the driver module. Then
744 exit minicom. I expect an "oops". -- REW */
745
746 static void scc_hungup(void *ptr)
747 {
748 scc_disable_tx_interrupts(ptr);
749 scc_disable_rx_interrupts(ptr);
750 }
751
752
753 static void scc_close(void *ptr)
754 {
755 scc_disable_tx_interrupts(ptr);
756 scc_disable_rx_interrupts(ptr);
757 }
758
759
760 /*---------------------------------------------------------------------------
761 * Internal support functions
762 *--------------------------------------------------------------------------*/
763
764 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
765 {
766 unsigned long flags;
767 unsigned char t;
768 SCC_ACCESS_INIT(port);
769
770 local_irq_save(flags);
771 t = SCCread(TX_CTRL_REG);
772 if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
773 if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
774 SCCwrite(TX_CTRL_REG, t);
775 local_irq_restore(flags);
776 }
777
778
779 static void scc_send_xchar(struct tty_struct *tty, char ch)
780 {
781 struct scc_port *port = (struct scc_port *)tty->driver_data;
782
783 port->x_char = ch;
784 if (ch)
785 scc_enable_tx_interrupts(port);
786 }
787
788
789 /*---------------------------------------------------------------------------
790 * Driver entrypoints referenced from above
791 *--------------------------------------------------------------------------*/
792
793 static int scc_open (struct tty_struct * tty, struct file * filp)
794 {
795 int line = tty->index;
796 int retval;
797 struct scc_port *port = &scc_ports[line];
798 int i, channel = port->channel;
799 unsigned long flags;
800 SCC_ACCESS_INIT(port);
801 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
802 static const struct {
803 unsigned reg, val;
804 } mvme_init_tab[] = {
805 /* Values for MVME162 and MVME147 */
806 /* no parity, 1 stop bit, async, 1:16 */
807 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
808 /* parity error is special cond, ints disabled, no DMA */
809 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
810 /* Rx 8 bits/char, no auto enable, Rx off */
811 { RX_CTRL_REG, RCR_CHSIZE_8 },
812 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
813 { TX_CTRL_REG, TCR_CHSIZE_8 },
814 /* special features off */
815 { AUX2_CTRL_REG, 0 },
816 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
817 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
818 /* Start Rx */
819 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
820 /* Start Tx */
821 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
822 /* Ext/Stat ints: DCD only */
823 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
824 /* Reset Ext/Stat ints */
825 { COMMAND_REG, CR_EXTSTAT_RESET },
826 /* ...again */
827 { COMMAND_REG, CR_EXTSTAT_RESET },
828 };
829 #endif
830 #if defined(CONFIG_BVME6000_SCC)
831 static const struct {
832 unsigned reg, val;
833 } bvme_init_tab[] = {
834 /* Values for BVME6000 */
835 /* no parity, 1 stop bit, async, 1:16 */
836 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
837 /* parity error is special cond, ints disabled, no DMA */
838 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
839 /* Rx 8 bits/char, no auto enable, Rx off */
840 { RX_CTRL_REG, RCR_CHSIZE_8 },
841 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
842 { TX_CTRL_REG, TCR_CHSIZE_8 },
843 /* special features off */
844 { AUX2_CTRL_REG, 0 },
845 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
846 { DPLL_CTRL_REG, DCR_BRG_ENAB },
847 /* Start Rx */
848 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
849 /* Start Tx */
850 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
851 /* Ext/Stat ints: DCD only */
852 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
853 /* Reset Ext/Stat ints */
854 { COMMAND_REG, CR_EXTSTAT_RESET },
855 /* ...again */
856 { COMMAND_REG, CR_EXTSTAT_RESET },
857 };
858 #endif
859 if (!(port->gs.flags & ASYNC_INITIALIZED)) {
860 local_irq_save(flags);
861 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
862 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
863 for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
864 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
865 }
866 #endif
867 #if defined(CONFIG_BVME6000_SCC)
868 if (MACH_IS_BVME6000) {
869 for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
870 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
871 }
872 #endif
873
874 /* remember status register for detection of DCD and CTS changes */
875 scc_last_status_reg[channel] = SCCread(STATUS_REG);
876
877 port->c_dcd = 0; /* Prevent initial 1->0 interrupt */
878 scc_setsignals (port, 1,1);
879 local_irq_restore(flags);
880 }
881
882 tty->driver_data = port;
883 port->gs.tty = tty;
884 port->gs.count++;
885 retval = gs_init_port(&port->gs);
886 if (retval) {
887 port->gs.count--;
888 return retval;
889 }
890 port->gs.flags |= GS_ACTIVE;
891 retval = gs_block_til_ready(port, filp);
892
893 if (retval) {
894 port->gs.count--;
895 return retval;
896 }
897
898 port->c_dcd = scc_get_CD (port);
899
900 scc_enable_rx_interrupts(port);
901
902 return 0;
903 }
904
905
906 static void scc_throttle (struct tty_struct * tty)
907 {
908 struct scc_port *port = (struct scc_port *)tty->driver_data;
909 unsigned long flags;
910 SCC_ACCESS_INIT(port);
911
912 if (tty->termios->c_cflag & CRTSCTS) {
913 local_irq_save(flags);
914 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
915 local_irq_restore(flags);
916 }
917 if (I_IXOFF(tty))
918 scc_send_xchar(tty, STOP_CHAR(tty));
919 }
920
921
922 static void scc_unthrottle (struct tty_struct * tty)
923 {
924 struct scc_port *port = (struct scc_port *)tty->driver_data;
925 unsigned long flags;
926 SCC_ACCESS_INIT(port);
927
928 if (tty->termios->c_cflag & CRTSCTS) {
929 local_irq_save(flags);
930 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
931 local_irq_restore(flags);
932 }
933 if (I_IXOFF(tty))
934 scc_send_xchar(tty, START_CHAR(tty));
935 }
936
937
938 static int scc_ioctl(struct tty_struct *tty, struct file *file,
939 unsigned int cmd, unsigned long arg)
940 {
941 return -ENOIOCTLCMD;
942 }
943
944
945 static void scc_break_ctl(struct tty_struct *tty, int break_state)
946 {
947 struct scc_port *port = (struct scc_port *)tty->driver_data;
948 unsigned long flags;
949 SCC_ACCESS_INIT(port);
950
951 local_irq_save(flags);
952 SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
953 break_state ? TCR_SEND_BREAK : 0);
954 local_irq_restore(flags);
955 }
956
957
958 /*---------------------------------------------------------------------------
959 * Serial console stuff...
960 *--------------------------------------------------------------------------*/
961
962 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
963
964 static void scc_ch_write (char ch)
965 {
966 volatile char *p = NULL;
967
968 #ifdef CONFIG_MVME147_SCC
969 if (MACH_IS_MVME147)
970 p = (volatile char *)M147_SCC_A_ADDR;
971 #endif
972 #ifdef CONFIG_MVME162_SCC
973 if (MACH_IS_MVME16x)
974 p = (volatile char *)MVME_SCC_A_ADDR;
975 #endif
976 #ifdef CONFIG_BVME6000_SCC
977 if (MACH_IS_BVME6000)
978 p = (volatile char *)BVME_SCC_A_ADDR;
979 #endif
980
981 do {
982 scc_delay();
983 }
984 while (!(*p & 4));
985 scc_delay();
986 *p = 8;
987 scc_delay();
988 *p = ch;
989 }
990
991 /* The console must be locked when we get here. */
992
993 static void scc_console_write (struct console *co, const char *str, unsigned count)
994 {
995 unsigned long flags;
996
997 local_irq_save(flags);
998
999 while (count--)
1000 {
1001 if (*str == '\n')
1002 scc_ch_write ('\r');
1003 scc_ch_write (*str++);
1004 }
1005 local_irq_restore(flags);
1006 }
1007
1008 static struct tty_driver *scc_console_device(struct console *c, int *index)
1009 {
1010 *index = c->index;
1011 return scc_driver;
1012 }
1013
1014 static struct console sercons = {
1015 .name = "ttyS",
1016 .write = scc_console_write,
1017 .device = scc_console_device,
1018 .flags = CON_PRINTBUFFER,
1019 .index = -1,
1020 };
1021
1022
1023 static int __init vme_scc_console_init(void)
1024 {
1025 if (vme_brdtype == VME_TYPE_MVME147 ||
1026 vme_brdtype == VME_TYPE_MVME162 ||
1027 vme_brdtype == VME_TYPE_MVME172 ||
1028 vme_brdtype == VME_TYPE_BVME4000 ||
1029 vme_brdtype == VME_TYPE_BVME6000)
1030 register_console(&sercons);
1031 return 0;
1032 }
1033 console_initcall(vme_scc_console_init);
Linux for Ginger Game Console