PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / media / dvb / frontends / mt352_priv.h
blob44ad0d4c8f12b2a2057cc7fd2fa6e7e2da96e768
1 /*
2 * Driver for Zarlink DVB-T MT352 demodulator
4 * Written by Holger Waechtler <holger@qanu.de>
5 * and Daniel Mack <daniel@qanu.de>
7 * AVerMedia AVerTV DVB-T 771 support by
8 * Wolfram Joost <dbox2@frokaschwei.de>
10 * Support for Samsung TDTC9251DH01C(M) tuner
11 * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
12 * Amauri Celani <acelani@essegi.net>
14 * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
15 * Christopher Pascoe <c.pascoe@itee.uq.edu.au>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License as published by
19 * the Free Software Foundation; either version 2 of the License, or
20 * (at your option) any later version.
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
33 #ifndef _MT352_PRIV_
34 #define _MT352_PRIV_
36 #define ID_MT352 0x13
38 #define msb(x) (((x) >> 8) & 0xff)
39 #define lsb(x) ((x) & 0xff)
41 enum mt352_reg_addr {
42 STATUS_0 = 0x00,
43 STATUS_1 = 0x01,
44 STATUS_2 = 0x02,
45 STATUS_3 = 0x03,
46 STATUS_4 = 0x04,
47 INTERRUPT_0 = 0x05,
48 INTERRUPT_1 = 0x06,
49 INTERRUPT_2 = 0x07,
50 INTERRUPT_3 = 0x08,
51 SNR = 0x09,
52 VIT_ERR_CNT_2 = 0x0A,
53 VIT_ERR_CNT_1 = 0x0B,
54 VIT_ERR_CNT_0 = 0x0C,
55 RS_ERR_CNT_2 = 0x0D,
56 RS_ERR_CNT_1 = 0x0E,
57 RS_ERR_CNT_0 = 0x0F,
58 RS_UBC_1 = 0x10,
59 RS_UBC_0 = 0x11,
60 AGC_GAIN_3 = 0x12,
61 AGC_GAIN_2 = 0x13,
62 AGC_GAIN_1 = 0x14,
63 AGC_GAIN_0 = 0x15,
64 FREQ_OFFSET_2 = 0x17,
65 FREQ_OFFSET_1 = 0x18,
66 FREQ_OFFSET_0 = 0x19,
67 TIMING_OFFSET_1 = 0x1A,
68 TIMING_OFFSET_0 = 0x1B,
69 CHAN_FREQ_1 = 0x1C,
70 CHAN_FREQ_0 = 0x1D,
71 TPS_RECEIVED_1 = 0x1E,
72 TPS_RECEIVED_0 = 0x1F,
73 TPS_CURRENT_1 = 0x20,
74 TPS_CURRENT_0 = 0x21,
75 TPS_CELL_ID_1 = 0x22,
76 TPS_CELL_ID_0 = 0x23,
77 TPS_MISC_DATA_2 = 0x24,
78 TPS_MISC_DATA_1 = 0x25,
79 TPS_MISC_DATA_0 = 0x26,
80 RESET = 0x50,
81 TPS_GIVEN_1 = 0x51,
82 TPS_GIVEN_0 = 0x52,
83 ACQ_CTL = 0x53,
84 TRL_NOMINAL_RATE_1 = 0x54,
85 TRL_NOMINAL_RATE_0 = 0x55,
86 INPUT_FREQ_1 = 0x56,
87 INPUT_FREQ_0 = 0x57,
88 TUNER_ADDR = 0x58,
89 CHAN_START_1 = 0x59,
90 CHAN_START_0 = 0x5A,
91 CONT_1 = 0x5B,
92 CONT_0 = 0x5C,
93 TUNER_GO = 0x5D,
94 STATUS_EN_0 = 0x5F,
95 STATUS_EN_1 = 0x60,
96 INTERRUPT_EN_0 = 0x61,
97 INTERRUPT_EN_1 = 0x62,
98 INTERRUPT_EN_2 = 0x63,
99 INTERRUPT_EN_3 = 0x64,
100 AGC_TARGET = 0x67,
101 AGC_CTL = 0x68,
102 CAPT_RANGE = 0x75,
103 SNR_SELECT_1 = 0x79,
104 SNR_SELECT_0 = 0x7A,
105 RS_ERR_PER_1 = 0x7C,
106 RS_ERR_PER_0 = 0x7D,
107 CHIP_ID = 0x7F,
108 CHAN_STOP_1 = 0x80,
109 CHAN_STOP_0 = 0x81,
110 CHAN_STEP_1 = 0x82,
111 CHAN_STEP_0 = 0x83,
112 FEC_LOCK_TIME = 0x85,
113 OFDM_LOCK_TIME = 0x86,
114 ACQ_DELAY = 0x87,
115 SCAN_CTL = 0x88,
116 CLOCK_CTL = 0x89,
117 CONFIG = 0x8A,
118 MCLK_RATIO = 0x8B,
119 GPP_CTL = 0x8C,
120 ADC_CTL_1 = 0x8E,
121 ADC_CTL_0 = 0x8F
124 /* here we assume 1/6MHz == 166.66kHz stepsize */
125 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
127 #endif /* _MT352_PRIV_ */