PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / media / dvb / pluto2 / pluto2.c
blob960ed5763ae1300f929538210bdbb509d36c4be0
1 /*
2 * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
4 * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
6 * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
7 * by Dany Salman <salmandany@yahoo.fr>
8 * Copyright (c) 2004 TDF
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/i2c.h>
27 #include <linux/i2c-algo-bit.h>
28 #include <linux/init.h>
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/pci.h>
32 #include <linux/dma-mapping.h>
34 #include "demux.h"
35 #include "dmxdev.h"
36 #include "dvb_demux.h"
37 #include "dvb_frontend.h"
38 #include "dvb_net.h"
39 #include "dvbdev.h"
40 #include "tda1004x.h"
42 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
44 #define DRIVER_NAME "pluto2"
46 #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
47 #define REG_PCAR 0x0020 /* PC address register */
48 #define REG_TSCR 0x0024 /* TS ctrl & status */
49 #define REG_MISC 0x0028 /* miscellaneous */
50 #define REG_MMAC 0x002c /* MSB MAC address */
51 #define REG_IMAC 0x0030 /* ISB MAC address */
52 #define REG_LMAC 0x0034 /* LSB MAC address */
53 #define REG_SPID 0x0038 /* SPI data */
54 #define REG_SLCS 0x003c /* serial links ctrl/status */
56 #define PID0_NOFIL (0x0001 << 16)
57 #define PIDn_ENP (0x0001 << 15)
58 #define PID0_END (0x0001 << 14)
59 #define PID0_AFIL (0x0001 << 13)
60 #define PIDn_PID (0x1fff << 0)
62 #define TSCR_NBPACKETS (0x00ff << 24)
63 #define TSCR_DEM (0x0001 << 17)
64 #define TSCR_DE (0x0001 << 16)
65 #define TSCR_RSTN (0x0001 << 15)
66 #define TSCR_MSKO (0x0001 << 14)
67 #define TSCR_MSKA (0x0001 << 13)
68 #define TSCR_MSKL (0x0001 << 12)
69 #define TSCR_OVR (0x0001 << 11)
70 #define TSCR_AFUL (0x0001 << 10)
71 #define TSCR_LOCK (0x0001 << 9)
72 #define TSCR_IACK (0x0001 << 8)
73 #define TSCR_ADEF (0x007f << 0)
75 #define MISC_DVR (0x0fff << 4)
76 #define MISC_ALED (0x0001 << 3)
77 #define MISC_FRST (0x0001 << 2)
78 #define MISC_LED1 (0x0001 << 1)
79 #define MISC_LED0 (0x0001 << 0)
81 #define SPID_SPIDR (0x00ff << 0)
83 #define SLCS_SCL (0x0001 << 7)
84 #define SLCS_SDA (0x0001 << 6)
85 #define SLCS_CSN (0x0001 << 2)
86 #define SLCS_OVR (0x0001 << 1)
87 #define SLCS_SWC (0x0001 << 0)
89 #define TS_DMA_PACKETS (8)
90 #define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
92 #define I2C_ADDR_TDA10046 0x10
93 #define I2C_ADDR_TUA6034 0xc2
94 #define NHWFILTERS 8
96 struct pluto {
97 /* pci */
98 struct pci_dev *pdev;
99 u8 __iomem *io_mem;
101 /* dvb */
102 struct dmx_frontend hw_frontend;
103 struct dmx_frontend mem_frontend;
104 struct dmxdev dmxdev;
105 struct dvb_adapter dvb_adapter;
106 struct dvb_demux demux;
107 struct dvb_frontend *fe;
108 struct dvb_net dvbnet;
109 unsigned int full_ts_users;
110 unsigned int users;
112 /* i2c */
113 struct i2c_algo_bit_data i2c_bit;
114 struct i2c_adapter i2c_adap;
115 unsigned int i2cbug;
117 /* irq */
118 unsigned int overflow;
120 /* dma */
121 dma_addr_t dma_addr;
122 u8 dma_buf[TS_DMA_BYTES];
123 u8 dummy[4096];
126 static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
128 return container_of(feed->demux, struct pluto, demux);
131 static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
133 return container_of(fe->dvb, struct pluto, dvb_adapter);
136 static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
138 return readl(&pluto->io_mem[reg]);
141 static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
143 writel(val, &pluto->io_mem[reg]);
146 static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
148 u32 val = readl(&pluto->io_mem[reg]);
149 val &= ~mask;
150 val |= bits;
151 writel(val, &pluto->io_mem[reg]);
154 static void pluto_write_tscr(struct pluto *pluto, u32 val)
156 /* set the number of packets */
157 val &= ~TSCR_ADEF;
158 val |= TS_DMA_PACKETS / 2;
160 pluto_writereg(pluto, REG_TSCR, val);
163 static void pluto_setsda(void *data, int state)
165 struct pluto *pluto = data;
167 if (state)
168 pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
169 else
170 pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
173 static void pluto_setscl(void *data, int state)
175 struct pluto *pluto = data;
177 if (state)
178 pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
179 else
180 pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
182 /* try to detect i2c_inb() to workaround hardware bug:
183 * reset SDA to high after SCL has been set to low */
184 if ((state) && (pluto->i2cbug == 0)) {
185 pluto->i2cbug = 1;
186 } else {
187 if ((!state) && (pluto->i2cbug == 1))
188 pluto_setsda(pluto, 1);
189 pluto->i2cbug = 0;
193 static int pluto_getsda(void *data)
195 struct pluto *pluto = data;
197 return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
200 static int pluto_getscl(void *data)
202 struct pluto *pluto = data;
204 return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
207 static void pluto_reset_frontend(struct pluto *pluto, int reenable)
209 u32 val = pluto_readreg(pluto, REG_MISC);
211 if (val & MISC_FRST) {
212 val &= ~MISC_FRST;
213 pluto_writereg(pluto, REG_MISC, val);
215 if (reenable) {
216 val |= MISC_FRST;
217 pluto_writereg(pluto, REG_MISC, val);
221 static void pluto_reset_ts(struct pluto *pluto, int reenable)
223 u32 val = pluto_readreg(pluto, REG_TSCR);
225 if (val & TSCR_RSTN) {
226 val &= ~TSCR_RSTN;
227 pluto_write_tscr(pluto, val);
229 if (reenable) {
230 val |= TSCR_RSTN;
231 pluto_write_tscr(pluto, val);
235 static void pluto_set_dma_addr(struct pluto *pluto)
237 pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr));
240 static int __devinit pluto_dma_map(struct pluto *pluto)
242 pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
243 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
245 return pci_dma_mapping_error(pluto->dma_addr);
248 static void pluto_dma_unmap(struct pluto *pluto)
250 pci_unmap_single(pluto->pdev, pluto->dma_addr,
251 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
254 static int pluto_start_feed(struct dvb_demux_feed *f)
256 struct pluto *pluto = feed_to_pluto(f);
258 /* enable PID filtering */
259 if (pluto->users++ == 0)
260 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
262 if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
263 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
264 else if (pluto->full_ts_users++ == 0)
265 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
267 return 0;
270 static int pluto_stop_feed(struct dvb_demux_feed *f)
272 struct pluto *pluto = feed_to_pluto(f);
274 /* disable PID filtering */
275 if (--pluto->users == 0)
276 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
278 if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
279 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
280 else if (--pluto->full_ts_users == 0)
281 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
283 return 0;
286 static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
288 /* synchronize the DMA transfer with the CPU
289 * first so that we see updated contents. */
290 pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
291 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
293 /* Workaround for broken hardware:
294 * [1] On startup NBPACKETS seems to contain an uninitialized value,
295 * but no packets have been transfered.
296 * [2] Sometimes (actually very often) NBPACKETS stays at zero
297 * although one packet has been transfered.
298 * [3] Sometimes (actually rarely), the card gets into an erroneous
299 * mode where it continuously generates interrupts, claiming it
300 * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
301 * has been transfered. Only a reset seems to solve this
303 if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
304 unsigned int i = 0;
305 while (pluto->dma_buf[i] == 0x47)
306 i += 188;
307 nbpackets = i / 188;
308 if (i == 0) {
309 pluto_reset_ts(pluto, 1);
310 dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
314 dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
316 /* clear the dma buffer. this is needed to be able to identify
317 * new valid ts packets above */
318 memset(pluto->dma_buf, 0, nbpackets * 188);
320 /* reset the dma address */
321 pluto_set_dma_addr(pluto);
323 /* sync the buffer and give it back to the card */
324 pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
325 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
328 static irqreturn_t pluto_irq(int irq, void *dev_id)
330 struct pluto *pluto = dev_id;
331 u32 tscr;
333 /* check whether an interrupt occured on this device */
334 tscr = pluto_readreg(pluto, REG_TSCR);
335 if (!(tscr & (TSCR_DE | TSCR_OVR)))
336 return IRQ_NONE;
338 if (tscr == 0xffffffff) {
339 // FIXME: maybe recover somehow
340 dev_err(&pluto->pdev->dev, "card hung up :(\n");
341 return IRQ_HANDLED;
344 /* dma end interrupt */
345 if (tscr & TSCR_DE) {
346 pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
347 /* overflow interrupt */
348 if (tscr & TSCR_OVR)
349 pluto->overflow++;
350 if (pluto->overflow) {
351 dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
352 pluto->overflow);
353 pluto_reset_ts(pluto, 1);
354 pluto->overflow = 0;
356 } else if (tscr & TSCR_OVR) {
357 pluto->overflow++;
360 /* ACK the interrupt */
361 pluto_write_tscr(pluto, tscr | TSCR_IACK);
363 return IRQ_HANDLED;
366 static void __devinit pluto_enable_irqs(struct pluto *pluto)
368 u32 val = pluto_readreg(pluto, REG_TSCR);
370 /* disable AFUL and LOCK interrupts */
371 val |= (TSCR_MSKA | TSCR_MSKL);
372 /* enable DMA and OVERFLOW interrupts */
373 val &= ~(TSCR_DEM | TSCR_MSKO);
374 /* clear pending interrupts */
375 val |= TSCR_IACK;
377 pluto_write_tscr(pluto, val);
380 static void pluto_disable_irqs(struct pluto *pluto)
382 u32 val = pluto_readreg(pluto, REG_TSCR);
384 /* disable all interrupts */
385 val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
386 /* clear pending interrupts */
387 val |= TSCR_IACK;
389 pluto_write_tscr(pluto, val);
392 static int __devinit pluto_hw_init(struct pluto *pluto)
394 pluto_reset_frontend(pluto, 1);
396 /* set automatic LED control by FPGA */
397 pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
399 /* set data endianess */
400 #ifdef __LITTLE_ENDIAN
401 pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
402 #else
403 pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
404 #endif
405 /* map DMA and set address */
406 pluto_dma_map(pluto);
407 pluto_set_dma_addr(pluto);
409 /* enable interrupts */
410 pluto_enable_irqs(pluto);
412 /* reset TS logic */
413 pluto_reset_ts(pluto, 1);
415 return 0;
418 static void pluto_hw_exit(struct pluto *pluto)
420 /* disable interrupts */
421 pluto_disable_irqs(pluto);
423 pluto_reset_ts(pluto, 0);
425 /* LED: disable automatic control, enable yellow, disable green */
426 pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
428 /* unmap DMA */
429 pluto_dma_unmap(pluto);
431 pluto_reset_frontend(pluto, 0);
434 static inline u32 divide(u32 numerator, u32 denominator)
436 if (denominator == 0)
437 return ~0;
439 return (numerator + denominator / 2) / denominator;
442 /* LG Innotek TDTE-E001P (Infineon TUA6034) */
443 static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe,
444 struct dvb_frontend_parameters *p)
446 struct pluto *pluto = frontend_to_pluto(fe);
447 struct i2c_msg msg;
448 int ret;
449 u8 buf[4];
450 u32 div;
452 // Fref = 166.667 Hz
453 // Fref * 3 = 500.000 Hz
454 // IF = 36166667
455 // IF / Fref = 217
456 //div = divide(p->frequency + 36166667, 166667);
457 div = divide(p->frequency * 3, 500000) + 217;
458 buf[0] = (div >> 8) & 0x7f;
459 buf[1] = (div >> 0) & 0xff;
461 if (p->frequency < 611000000)
462 buf[2] = 0xb4;
463 else if (p->frequency < 811000000)
464 buf[2] = 0xbc;
465 else
466 buf[2] = 0xf4;
468 // VHF: 174-230 MHz
469 // center: 350 MHz
470 // UHF: 470-862 MHz
471 if (p->frequency < 350000000)
472 buf[3] = 0x02;
473 else
474 buf[3] = 0x04;
476 if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
477 buf[3] |= 0x08;
479 if (sizeof(buf) == 6) {
480 buf[4] = buf[2];
481 buf[4] &= ~0x1c;
482 buf[4] |= 0x18;
484 buf[5] = (0 << 7) | (2 << 4);
487 msg.addr = I2C_ADDR_TUA6034 >> 1;
488 msg.flags = 0;
489 msg.buf = buf;
490 msg.len = sizeof(buf);
492 if (fe->ops.i2c_gate_ctrl)
493 fe->ops.i2c_gate_ctrl(fe, 1);
494 ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
495 if (ret < 0)
496 return ret;
497 else if (ret == 0)
498 return -EREMOTEIO;
500 return 0;
503 static int pluto2_request_firmware(struct dvb_frontend *fe,
504 const struct firmware **fw, char *name)
506 struct pluto *pluto = frontend_to_pluto(fe);
508 return request_firmware(fw, name, &pluto->pdev->dev);
511 static struct tda1004x_config pluto2_fe_config __devinitdata = {
512 .demod_address = I2C_ADDR_TDA10046 >> 1,
513 .invert = 1,
514 .invert_oclk = 0,
515 .xtal_freq = TDA10046_XTAL_16M,
516 .agc_config = TDA10046_AGC_DEFAULT,
517 .if_freq = TDA10046_FREQ_3617,
518 .request_firmware = pluto2_request_firmware,
521 static int __devinit frontend_init(struct pluto *pluto)
523 int ret;
525 pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
526 if (!pluto->fe) {
527 dev_err(&pluto->pdev->dev, "could not attach frontend\n");
528 return -ENODEV;
530 pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
532 ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
533 if (ret < 0) {
534 if (pluto->fe->ops.release)
535 pluto->fe->ops.release(pluto->fe);
536 return ret;
539 return 0;
542 static void __devinit pluto_read_rev(struct pluto *pluto)
544 u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
545 dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
546 (val >> 12) & 0x0f, (val >> 4) & 0xff);
549 static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
551 u32 val = pluto_readreg(pluto, REG_MMAC);
552 mac[0] = (val >> 8) & 0xff;
553 mac[1] = (val >> 0) & 0xff;
555 val = pluto_readreg(pluto, REG_IMAC);
556 mac[2] = (val >> 8) & 0xff;
557 mac[3] = (val >> 0) & 0xff;
559 val = pluto_readreg(pluto, REG_LMAC);
560 mac[4] = (val >> 8) & 0xff;
561 mac[5] = (val >> 0) & 0xff;
563 dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
564 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
567 static int __devinit pluto_read_serial(struct pluto *pluto)
569 struct pci_dev *pdev = pluto->pdev;
570 unsigned int i, j;
571 u8 __iomem *cis;
573 cis = pci_iomap(pdev, 1, 0);
574 if (!cis)
575 return -EIO;
577 dev_info(&pdev->dev, "S/N ");
579 for (i = 0xe0; i < 0x100; i += 4) {
580 u32 val = readl(&cis[i]);
581 for (j = 0; j < 32; j += 8) {
582 if ((val & 0xff) == 0xff)
583 goto out;
584 printk("%c", val & 0xff);
585 val >>= 8;
588 out:
589 printk("\n");
590 pci_iounmap(pdev, cis);
592 return 0;
595 static int __devinit pluto2_probe(struct pci_dev *pdev,
596 const struct pci_device_id *ent)
598 struct pluto *pluto;
599 struct dvb_adapter *dvb_adapter;
600 struct dvb_demux *dvbdemux;
601 struct dmx_demux *dmx;
602 int ret = -ENOMEM;
604 pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
605 if (!pluto)
606 goto out;
608 pluto->pdev = pdev;
610 ret = pci_enable_device(pdev);
611 if (ret < 0)
612 goto err_kfree;
614 /* enable interrupts */
615 pci_write_config_dword(pdev, 0x6c, 0x8000);
617 ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
618 if (ret < 0)
619 goto err_pci_disable_device;
621 pci_set_master(pdev);
623 ret = pci_request_regions(pdev, DRIVER_NAME);
624 if (ret < 0)
625 goto err_pci_disable_device;
627 pluto->io_mem = pci_iomap(pdev, 0, 0x40);
628 if (!pluto->io_mem) {
629 ret = -EIO;
630 goto err_pci_release_regions;
633 pci_set_drvdata(pdev, pluto);
635 ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
636 if (ret < 0)
637 goto err_pci_iounmap;
639 ret = pluto_hw_init(pluto);
640 if (ret < 0)
641 goto err_free_irq;
643 /* i2c */
644 i2c_set_adapdata(&pluto->i2c_adap, pluto);
645 strcpy(pluto->i2c_adap.name, DRIVER_NAME);
646 pluto->i2c_adap.owner = THIS_MODULE;
647 pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
648 pluto->i2c_adap.dev.parent = &pdev->dev;
649 pluto->i2c_adap.algo_data = &pluto->i2c_bit;
650 pluto->i2c_bit.data = pluto;
651 pluto->i2c_bit.setsda = pluto_setsda;
652 pluto->i2c_bit.setscl = pluto_setscl;
653 pluto->i2c_bit.getsda = pluto_getsda;
654 pluto->i2c_bit.getscl = pluto_getscl;
655 pluto->i2c_bit.udelay = 10;
656 pluto->i2c_bit.timeout = 10;
658 /* Raise SCL and SDA */
659 pluto_setsda(pluto, 1);
660 pluto_setscl(pluto, 1);
662 ret = i2c_bit_add_bus(&pluto->i2c_adap);
663 if (ret < 0)
664 goto err_pluto_hw_exit;
666 /* dvb */
667 ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
668 THIS_MODULE, &pdev->dev, adapter_nr);
669 if (ret < 0)
670 goto err_i2c_del_adapter;
672 dvb_adapter = &pluto->dvb_adapter;
674 pluto_read_rev(pluto);
675 pluto_read_serial(pluto);
676 pluto_read_mac(pluto, dvb_adapter->proposed_mac);
678 dvbdemux = &pluto->demux;
679 dvbdemux->filternum = 256;
680 dvbdemux->feednum = 256;
681 dvbdemux->start_feed = pluto_start_feed;
682 dvbdemux->stop_feed = pluto_stop_feed;
683 dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
684 DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
685 ret = dvb_dmx_init(dvbdemux);
686 if (ret < 0)
687 goto err_dvb_unregister_adapter;
689 dmx = &dvbdemux->dmx;
691 pluto->hw_frontend.source = DMX_FRONTEND_0;
692 pluto->mem_frontend.source = DMX_MEMORY_FE;
693 pluto->dmxdev.filternum = NHWFILTERS;
694 pluto->dmxdev.demux = dmx;
696 ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
697 if (ret < 0)
698 goto err_dvb_dmx_release;
700 ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
701 if (ret < 0)
702 goto err_dvb_dmxdev_release;
704 ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
705 if (ret < 0)
706 goto err_remove_hw_frontend;
708 ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
709 if (ret < 0)
710 goto err_remove_mem_frontend;
712 ret = frontend_init(pluto);
713 if (ret < 0)
714 goto err_disconnect_frontend;
716 dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
717 out:
718 return ret;
720 err_disconnect_frontend:
721 dmx->disconnect_frontend(dmx);
722 err_remove_mem_frontend:
723 dmx->remove_frontend(dmx, &pluto->mem_frontend);
724 err_remove_hw_frontend:
725 dmx->remove_frontend(dmx, &pluto->hw_frontend);
726 err_dvb_dmxdev_release:
727 dvb_dmxdev_release(&pluto->dmxdev);
728 err_dvb_dmx_release:
729 dvb_dmx_release(dvbdemux);
730 err_dvb_unregister_adapter:
731 dvb_unregister_adapter(dvb_adapter);
732 err_i2c_del_adapter:
733 i2c_del_adapter(&pluto->i2c_adap);
734 err_pluto_hw_exit:
735 pluto_hw_exit(pluto);
736 err_free_irq:
737 free_irq(pdev->irq, pluto);
738 err_pci_iounmap:
739 pci_iounmap(pdev, pluto->io_mem);
740 err_pci_release_regions:
741 pci_release_regions(pdev);
742 err_pci_disable_device:
743 pci_disable_device(pdev);
744 err_kfree:
745 pci_set_drvdata(pdev, NULL);
746 kfree(pluto);
747 goto out;
750 static void __devexit pluto2_remove(struct pci_dev *pdev)
752 struct pluto *pluto = pci_get_drvdata(pdev);
753 struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
754 struct dvb_demux *dvbdemux = &pluto->demux;
755 struct dmx_demux *dmx = &dvbdemux->dmx;
757 dmx->close(dmx);
758 dvb_net_release(&pluto->dvbnet);
759 if (pluto->fe)
760 dvb_unregister_frontend(pluto->fe);
762 dmx->disconnect_frontend(dmx);
763 dmx->remove_frontend(dmx, &pluto->mem_frontend);
764 dmx->remove_frontend(dmx, &pluto->hw_frontend);
765 dvb_dmxdev_release(&pluto->dmxdev);
766 dvb_dmx_release(dvbdemux);
767 dvb_unregister_adapter(dvb_adapter);
768 i2c_del_adapter(&pluto->i2c_adap);
769 pluto_hw_exit(pluto);
770 free_irq(pdev->irq, pluto);
771 pci_iounmap(pdev, pluto->io_mem);
772 pci_release_regions(pdev);
773 pci_disable_device(pdev);
774 pci_set_drvdata(pdev, NULL);
775 kfree(pluto);
778 #ifndef PCI_VENDOR_ID_SCM
779 #define PCI_VENDOR_ID_SCM 0x0432
780 #endif
781 #ifndef PCI_DEVICE_ID_PLUTO2
782 #define PCI_DEVICE_ID_PLUTO2 0x0001
783 #endif
785 static struct pci_device_id pluto2_id_table[] __devinitdata = {
787 .vendor = PCI_VENDOR_ID_SCM,
788 .device = PCI_DEVICE_ID_PLUTO2,
789 .subvendor = PCI_ANY_ID,
790 .subdevice = PCI_ANY_ID,
791 }, {
792 /* empty */
796 MODULE_DEVICE_TABLE(pci, pluto2_id_table);
798 static struct pci_driver pluto2_driver = {
799 .name = DRIVER_NAME,
800 .id_table = pluto2_id_table,
801 .probe = pluto2_probe,
802 .remove = __devexit_p(pluto2_remove),
805 static int __init pluto2_init(void)
807 return pci_register_driver(&pluto2_driver);
810 static void __exit pluto2_exit(void)
812 pci_unregister_driver(&pluto2_driver);
815 module_init(pluto2_init);
816 module_exit(pluto2_exit);
818 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
819 MODULE_DESCRIPTION("Pluto2 driver");
820 MODULE_LICENSE("GPL");