PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / media / dvb / ttpci / budget.c
blob2293d80c6e5131fcad7feed54d7823581571ac65
1 /*
2 * budget.c: driver for the SAA7146 based Budget DVB cards
4 * Compiled from various sources by Michael Hunold <michael@mihu.de>
6 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
8 * Copyright (C) 1999-2002 Ralph Metzler
9 * & Marcus Metzler for convergence integrated media GmbH
11 * 26feb2004 Support for FS Activy Card (Grundig tuner) by
12 * Michael Dreher <michael@5dot1.de>,
13 * Oliver Endriss <o.endriss@gmx.de> and
14 * Andreas 'randy' Weinberger
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License
18 * as published by the Free Software Foundation; either version 2
19 * of the License, or (at your option) any later version.
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
34 * the project's page is at http://www.linuxtv.org/dvb/
37 #include "budget.h"
38 #include "stv0299.h"
39 #include "ves1x93.h"
40 #include "ves1820.h"
41 #include "l64781.h"
42 #include "tda8083.h"
43 #include "s5h1420.h"
44 #include "tda10086.h"
45 #include "tda826x.h"
46 #include "lnbp21.h"
47 #include "bsru6.h"
48 #include "bsbe1.h"
50 static int diseqc_method;
51 module_param(diseqc_method, int, 0444);
52 MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
54 static void Set22K (struct budget *budget, int state)
56 struct saa7146_dev *dev=budget->dev;
57 dprintk(2, "budget: %p\n", budget);
58 saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
61 /* Diseqc functions only for TT Budget card */
62 /* taken from the Skyvision DVB driver by
63 Ralph Metzler <rjkm@metzlerbros.de> */
65 static void DiseqcSendBit (struct budget *budget, int data)
67 struct saa7146_dev *dev=budget->dev;
68 dprintk(2, "budget: %p\n", budget);
70 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
71 udelay(data ? 500 : 1000);
72 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
73 udelay(data ? 1000 : 500);
76 static void DiseqcSendByte (struct budget *budget, int data)
78 int i, par=1, d;
80 dprintk(2, "budget: %p\n", budget);
82 for (i=7; i>=0; i--) {
83 d = (data>>i)&1;
84 par ^= d;
85 DiseqcSendBit(budget, d);
88 DiseqcSendBit(budget, par);
91 static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
93 struct saa7146_dev *dev=budget->dev;
94 int i;
96 dprintk(2, "budget: %p\n", budget);
98 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
99 mdelay(16);
101 for (i=0; i<len; i++)
102 DiseqcSendByte(budget, msg[i]);
104 mdelay(16);
106 if (burst!=-1) {
107 if (burst)
108 DiseqcSendByte(budget, 0xff);
109 else {
110 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
111 udelay(12500);
112 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
114 msleep(20);
117 return 0;
121 * Routines for the Fujitsu Siemens Activy budget card
122 * 22 kHz tone and DiSEqC are handled by the frontend.
123 * Voltage must be set here.
124 * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
126 static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
128 struct saa7146_dev *dev=budget->dev;
130 dprintk(2, "budget: %p\n", budget);
132 switch (voltage) {
133 case SEC_VOLTAGE_13:
134 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
135 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
136 break;
137 case SEC_VOLTAGE_18:
138 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
139 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
140 break;
141 case SEC_VOLTAGE_OFF:
142 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
143 break;
144 default:
145 return -EINVAL;
148 return 0;
151 static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
153 struct budget* budget = (struct budget*) fe->dvb->priv;
155 return SetVoltage_Activy (budget, voltage);
158 static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
160 struct budget* budget = (struct budget*) fe->dvb->priv;
162 switch (tone) {
163 case SEC_TONE_ON:
164 Set22K (budget, 1);
165 break;
167 case SEC_TONE_OFF:
168 Set22K (budget, 0);
169 break;
171 default:
172 return -EINVAL;
175 return 0;
178 static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
180 struct budget* budget = (struct budget*) fe->dvb->priv;
182 SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
184 return 0;
187 static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
189 struct budget* budget = (struct budget*) fe->dvb->priv;
191 SendDiSEqCMsg (budget, 0, NULL, minicmd);
193 return 0;
196 static int alps_bsrv2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
198 struct budget* budget = (struct budget*) fe->dvb->priv;
199 u8 pwr = 0;
200 u8 buf[4];
201 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
202 u32 div = (params->frequency + 479500) / 125;
204 if (params->frequency > 2000000) pwr = 3;
205 else if (params->frequency > 1800000) pwr = 2;
206 else if (params->frequency > 1600000) pwr = 1;
207 else if (params->frequency > 1200000) pwr = 0;
208 else if (params->frequency >= 1100000) pwr = 1;
209 else pwr = 2;
211 buf[0] = (div >> 8) & 0x7f;
212 buf[1] = div & 0xff;
213 buf[2] = ((div & 0x18000) >> 10) | 0x95;
214 buf[3] = (pwr << 6) | 0x30;
216 // NOTE: since we're using a prescaler of 2, we set the
217 // divisor frequency to 62.5kHz and divide by 125 above
219 if (fe->ops.i2c_gate_ctrl)
220 fe->ops.i2c_gate_ctrl(fe, 1);
221 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
222 return 0;
225 static struct ves1x93_config alps_bsrv2_config =
227 .demod_address = 0x08,
228 .xin = 90100000UL,
229 .invert_pwm = 0,
232 static int alps_tdbe2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
234 struct budget* budget = (struct budget*) fe->dvb->priv;
235 u32 div;
236 u8 data[4];
237 struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
239 div = (params->frequency + 35937500 + 31250) / 62500;
241 data[0] = (div >> 8) & 0x7f;
242 data[1] = div & 0xff;
243 data[2] = 0x85 | ((div >> 10) & 0x60);
244 data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81);
246 if (fe->ops.i2c_gate_ctrl)
247 fe->ops.i2c_gate_ctrl(fe, 1);
248 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
249 return 0;
252 static struct ves1820_config alps_tdbe2_config = {
253 .demod_address = 0x09,
254 .xin = 57840000UL,
255 .invert = 1,
256 .selagc = VES1820_SELAGC_SIGNAMPERR,
259 static int grundig_29504_401_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
261 struct budget *budget = fe->dvb->priv;
262 u8 *tuner_addr = fe->tuner_priv;
263 u32 div;
264 u8 cfg, cpump, band_select;
265 u8 data[4];
266 struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
268 if (tuner_addr)
269 msg.addr = *tuner_addr;
270 else
271 msg.addr = 0x61;
273 div = (36125000 + params->frequency) / 166666;
275 cfg = 0x88;
277 if (params->frequency < 175000000) cpump = 2;
278 else if (params->frequency < 390000000) cpump = 1;
279 else if (params->frequency < 470000000) cpump = 2;
280 else if (params->frequency < 750000000) cpump = 1;
281 else cpump = 3;
283 if (params->frequency < 175000000) band_select = 0x0e;
284 else if (params->frequency < 470000000) band_select = 0x05;
285 else band_select = 0x03;
287 data[0] = (div >> 8) & 0x7f;
288 data[1] = div & 0xff;
289 data[2] = ((div >> 10) & 0x60) | cfg;
290 data[3] = (cpump << 6) | band_select;
292 if (fe->ops.i2c_gate_ctrl)
293 fe->ops.i2c_gate_ctrl(fe, 1);
294 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
295 return 0;
298 static struct l64781_config grundig_29504_401_config = {
299 .demod_address = 0x55,
302 static struct l64781_config grundig_29504_401_config_activy = {
303 .demod_address = 0x54,
306 static u8 tuner_address_grundig_29504_401_activy = 0x60;
308 static int grundig_29504_451_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
310 struct budget* budget = (struct budget*) fe->dvb->priv;
311 u32 div;
312 u8 data[4];
313 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
315 div = params->frequency / 125;
316 data[0] = (div >> 8) & 0x7f;
317 data[1] = div & 0xff;
318 data[2] = 0x8e;
319 data[3] = 0x00;
321 if (fe->ops.i2c_gate_ctrl)
322 fe->ops.i2c_gate_ctrl(fe, 1);
323 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
324 return 0;
327 static struct tda8083_config grundig_29504_451_config = {
328 .demod_address = 0x68,
331 static int s5h1420_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
333 struct budget* budget = (struct budget*) fe->dvb->priv;
334 u32 div;
335 u8 data[4];
336 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
338 div = params->frequency / 1000;
339 data[0] = (div >> 8) & 0x7f;
340 data[1] = div & 0xff;
341 data[2] = 0xc2;
343 if (div < 1450)
344 data[3] = 0x00;
345 else if (div < 1850)
346 data[3] = 0x40;
347 else if (div < 2000)
348 data[3] = 0x80;
349 else
350 data[3] = 0xc0;
352 if (fe->ops.i2c_gate_ctrl)
353 fe->ops.i2c_gate_ctrl(fe, 1);
354 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
356 return 0;
359 static struct s5h1420_config s5h1420_config = {
360 .demod_address = 0x53,
361 .invert = 1,
362 .cdclk_polarity = 1,
365 static struct tda10086_config tda10086_config = {
366 .demod_address = 0x0e,
367 .invert = 0,
368 .diseqc_tone = 1,
369 .xtal_freq = TDA10086_XTAL_16M,
372 static struct stv0299_config alps_bsru6_config_activy = {
373 .demod_address = 0x68,
374 .inittab = alps_bsru6_inittab,
375 .mclk = 88000000UL,
376 .invert = 1,
377 .op0_off = 1,
378 .min_delay_ms = 100,
379 .set_symbol_rate = alps_bsru6_set_symbol_rate,
382 static struct stv0299_config alps_bsbe1_config_activy = {
383 .demod_address = 0x68,
384 .inittab = alps_bsbe1_inittab,
385 .mclk = 88000000UL,
386 .invert = 1,
387 .op0_off = 1,
388 .min_delay_ms = 100,
389 .set_symbol_rate = alps_bsbe1_set_symbol_rate,
393 static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
395 u8 val;
396 struct i2c_msg msg[] = {
397 { .addr = adr, .flags = 0, .buf = &reg, .len = 1 },
398 { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
401 return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
404 static u8 read_pwm(struct budget* budget)
406 u8 b = 0xff;
407 u8 pwm;
408 struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
409 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
411 if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
412 pwm = 0x48;
414 return pwm;
417 static void frontend_init(struct budget *budget)
419 (void)alps_bsbe1_config; /* avoid warning */
421 switch(budget->dev->pci->subsystem_device) {
422 case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
423 case 0x1013:
424 // try the ALPS BSRV2 first of all
425 budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
426 if (budget->dvb_frontend) {
427 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
428 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
429 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
430 budget->dvb_frontend->ops.set_tone = budget_set_tone;
431 break;
434 // try the ALPS BSRU6 now
435 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
436 if (budget->dvb_frontend) {
437 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
438 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
439 if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
440 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
441 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
442 budget->dvb_frontend->ops.set_tone = budget_set_tone;
444 break;
446 break;
448 case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
450 budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
451 if (budget->dvb_frontend) {
452 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
453 break;
455 break;
457 case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
459 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
460 if (budget->dvb_frontend) {
461 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
462 break;
464 break;
466 case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
468 int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
470 if (subtype < 0)
471 break;
472 /* fixme: find a better way to identify the card */
473 if (subtype < 0x36) {
474 /* assume ALPS BSRU6 */
475 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
476 if (budget->dvb_frontend) {
477 printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
478 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
479 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
480 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
481 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
482 break;
484 } else {
485 /* assume ALPS BSBE1 */
486 /* reset tuner */
487 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
488 msleep(50);
489 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
490 msleep(250);
491 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
492 if (budget->dvb_frontend) {
493 printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
494 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
495 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
496 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
497 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
498 break;
501 break;
504 case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
505 budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
506 if (budget->dvb_frontend) {
507 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
508 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
509 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
511 break;
513 case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
514 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
515 if (budget->dvb_frontend) {
516 budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
517 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
519 break;
521 case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
522 budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
523 if (budget->dvb_frontend) {
524 budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
525 if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
526 printk("%s: No LNBP21 found!\n", __func__);
527 goto error_out;
529 break;
532 case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262)
533 // gpio2 is connected to CLB - reset it + leave it high
534 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
535 msleep(1);
536 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
537 msleep(1);
539 budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
540 if (budget->dvb_frontend) {
541 if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL)
542 printk("%s: No tda826x found!\n", __func__);
543 if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
544 printk("%s: No LNBP21 found!\n", __func__);
545 goto error_out;
547 break;
551 if (budget->dvb_frontend == NULL) {
552 printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
553 budget->dev->pci->vendor,
554 budget->dev->pci->device,
555 budget->dev->pci->subsystem_vendor,
556 budget->dev->pci->subsystem_device);
557 } else {
558 if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
559 goto error_out;
561 return;
563 error_out:
564 printk("budget: Frontend registration failed!\n");
565 dvb_frontend_detach(budget->dvb_frontend);
566 budget->dvb_frontend = NULL;
567 return;
570 static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
572 struct budget *budget = NULL;
573 int err;
575 budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
576 if( NULL == budget ) {
577 return -ENOMEM;
580 dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
582 dev->ext_priv = budget;
584 if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
585 printk("==> failed\n");
586 kfree (budget);
587 return err;
590 budget->dvb_adapter.priv = budget;
591 frontend_init(budget);
593 ttpci_budget_init_hooks(budget);
595 return 0;
598 static int budget_detach (struct saa7146_dev* dev)
600 struct budget *budget = (struct budget*) dev->ext_priv;
601 int err;
603 if (budget->dvb_frontend) {
604 dvb_unregister_frontend(budget->dvb_frontend);
605 dvb_frontend_detach(budget->dvb_frontend);
608 err = ttpci_budget_deinit (budget);
610 kfree (budget);
611 dev->ext_priv = NULL;
613 return err;
616 static struct saa7146_extension budget_extension;
618 MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
619 MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
620 MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
621 MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
622 MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
623 MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
624 MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
625 MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
627 static struct pci_device_id pci_tbl[] = {
628 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
629 MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
630 MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
631 MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
632 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
633 MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
634 MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
635 MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
636 MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
638 .vendor = 0,
642 MODULE_DEVICE_TABLE(pci, pci_tbl);
644 static struct saa7146_extension budget_extension = {
645 .name = "budget dvb",
646 .flags = SAA7146_USE_I2C_IRQ,
648 .module = THIS_MODULE,
649 .pci_tbl = pci_tbl,
650 .attach = budget_attach,
651 .detach = budget_detach,
653 .irq_mask = MASK_10,
654 .irq_func = ttpci_budget_irq10_handler,
657 static int __init budget_init(void)
659 return saa7146_register_extension(&budget_extension);
662 static void __exit budget_exit(void)
664 saa7146_unregister_extension(&budget_extension);
667 module_init(budget_init);
668 module_exit(budget_exit);
670 MODULE_LICENSE("GPL");
671 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
672 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
673 "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");