PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / media / video / saa7134 / saa7134-core.c
blob2c19cd0113c8d2e1faa1b54493562b456a8ed3c4
1 /*
3 * device driver for philips saa7134 based TV cards
4 * driver core
6 * (c) 2001-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/init.h>
24 #include <linux/list.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/slab.h>
28 #include <linux/kmod.h>
29 #include <linux/sound.h>
30 #include <linux/interrupt.h>
31 #include <linux/delay.h>
32 #include <linux/mutex.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/pm.h>
36 #include "saa7134-reg.h"
37 #include "saa7134.h"
39 MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
40 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
41 MODULE_LICENSE("GPL");
43 /* ------------------------------------------------------------------ */
45 static unsigned int irq_debug;
46 module_param(irq_debug, int, 0644);
47 MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
49 static unsigned int core_debug;
50 module_param(core_debug, int, 0644);
51 MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
53 static unsigned int gpio_tracking;
54 module_param(gpio_tracking, int, 0644);
55 MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
57 static unsigned int alsa;
58 module_param(alsa, int, 0644);
59 MODULE_PARM_DESC(alsa,"enable ALSA DMA sound [dmasound]");
61 static unsigned int oss;
62 module_param(oss, int, 0644);
63 MODULE_PARM_DESC(oss,"enable OSS DMA sound [dmasound]");
65 static unsigned int latency = UNSET;
66 module_param(latency, int, 0444);
67 MODULE_PARM_DESC(latency,"pci latency timer");
69 int saa7134_no_overlay=-1;
70 module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
71 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
72 " [some VIA/SIS chipsets are known to have problem with overlay]");
74 static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
75 static unsigned int vbi_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
76 static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
77 static unsigned int tuner[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
78 static unsigned int card[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
81 module_param_array(video_nr, int, NULL, 0444);
82 module_param_array(vbi_nr, int, NULL, 0444);
83 module_param_array(radio_nr, int, NULL, 0444);
84 module_param_array(tuner, int, NULL, 0444);
85 module_param_array(card, int, NULL, 0444);
87 MODULE_PARM_DESC(video_nr, "video device number");
88 MODULE_PARM_DESC(vbi_nr, "vbi device number");
89 MODULE_PARM_DESC(radio_nr, "radio device number");
90 MODULE_PARM_DESC(tuner, "tuner type");
91 MODULE_PARM_DESC(card, "card type");
93 static DEFINE_MUTEX(devlist_lock);
94 LIST_HEAD(saa7134_devlist);
95 static LIST_HEAD(mops_list);
96 static unsigned int saa7134_devcount;
98 int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
99 int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
101 #define dprintk(fmt, arg...) if (core_debug) \
102 printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
104 void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
106 unsigned long mode,status;
108 if (!gpio_tracking)
109 return;
110 /* rising SAA7134_GPIO_GPRESCAN reads the status */
111 saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0);
112 saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
113 mode = saa_readl(SAA7134_GPIO_GPMODE0 >> 2) & 0xfffffff;
114 status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
115 printk(KERN_DEBUG
116 "%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
117 dev->name, mode, (~mode) & status, mode & status, msg);
120 void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
122 u32 index, bitval;
124 index = 1 << bit_no;
125 switch (value) {
126 case 0: /* static value */
127 case 1: dprintk("setting GPIO%d to static %d\n", bit_no, value);
128 /* turn sync mode off if necessary */
129 if (index & 0x00c00000)
130 saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00);
131 if (value)
132 bitval = index;
133 else
134 bitval = 0;
135 saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, index);
136 saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval);
137 break;
138 case 3: /* tristate */
139 dprintk("setting GPIO%d to tristate\n", bit_no);
140 saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0);
141 break;
145 /* ------------------------------------------------------------------ */
148 /* ----------------------------------------------------------- */
149 /* delayed request_module */
151 #if defined(CONFIG_MODULES) && defined(MODULE)
154 static void request_module_async(struct work_struct *work){
155 struct saa7134_dev* dev = container_of(work, struct saa7134_dev, request_module_wk);
156 if (card_is_empress(dev))
157 request_module("saa7134-empress");
158 if (card_is_dvb(dev))
159 request_module("saa7134-dvb");
160 if (alsa)
161 request_module("saa7134-alsa");
162 if (oss)
163 request_module("saa7134-oss");
166 static void request_submodules(struct saa7134_dev *dev)
168 INIT_WORK(&dev->request_module_wk, request_module_async);
169 schedule_work(&dev->request_module_wk);
172 #else
173 #define request_submodules(dev)
174 #endif /* CONFIG_MODULES */
176 /* ------------------------------------------------------------------ */
178 /* nr of (saa7134-)pages for the given buffer size */
179 static int saa7134_buffer_pages(int size)
181 size = PAGE_ALIGN(size);
182 size += PAGE_SIZE; /* for non-page-aligned buffers */
183 size /= 4096;
184 return size;
187 /* calc max # of buffers from size (must not exceed the 4MB virtual
188 * address space per DMA channel) */
189 int saa7134_buffer_count(unsigned int size, unsigned int count)
191 unsigned int maxcount;
193 maxcount = 1024 / saa7134_buffer_pages(size);
194 if (count > maxcount)
195 count = maxcount;
196 return count;
199 int saa7134_buffer_startpage(struct saa7134_buf *buf)
201 return saa7134_buffer_pages(buf->vb.bsize) * buf->vb.i;
204 unsigned long saa7134_buffer_base(struct saa7134_buf *buf)
206 unsigned long base;
207 struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
209 base = saa7134_buffer_startpage(buf) * 4096;
210 base += dma->sglist[0].offset;
211 return base;
214 /* ------------------------------------------------------------------ */
216 int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt)
218 __le32 *cpu;
219 dma_addr_t dma_addr;
221 cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr);
222 if (NULL == cpu)
223 return -ENOMEM;
224 pt->size = SAA7134_PGTABLE_SIZE;
225 pt->cpu = cpu;
226 pt->dma = dma_addr;
227 return 0;
230 int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt,
231 struct scatterlist *list, unsigned int length,
232 unsigned int startpage)
234 __le32 *ptr;
235 unsigned int i,p;
237 BUG_ON(NULL == pt || NULL == pt->cpu);
239 ptr = pt->cpu + startpage;
240 for (i = 0; i < length; i++, list++)
241 for (p = 0; p * 4096 < list->length; p++, ptr++)
242 *ptr = cpu_to_le32(sg_dma_address(list) - list->offset);
243 return 0;
246 void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
248 if (NULL == pt->cpu)
249 return;
250 pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
251 pt->cpu = NULL;
254 /* ------------------------------------------------------------------ */
256 void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
258 struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
259 BUG_ON(in_interrupt());
261 videobuf_waiton(&buf->vb,0,0);
262 videobuf_dma_unmap(q, dma);
263 videobuf_dma_free(dma);
264 buf->vb.state = VIDEOBUF_NEEDS_INIT;
267 /* ------------------------------------------------------------------ */
269 int saa7134_buffer_queue(struct saa7134_dev *dev,
270 struct saa7134_dmaqueue *q,
271 struct saa7134_buf *buf)
273 struct saa7134_buf *next = NULL;
275 assert_spin_locked(&dev->slock);
276 dprintk("buffer_queue %p\n",buf);
277 if (NULL == q->curr) {
278 if (!q->need_two) {
279 q->curr = buf;
280 buf->activate(dev,buf,NULL);
281 } else if (list_empty(&q->queue)) {
282 list_add_tail(&buf->vb.queue,&q->queue);
283 buf->vb.state = VIDEOBUF_QUEUED;
284 } else {
285 next = list_entry(q->queue.next,struct saa7134_buf,
286 vb.queue);
287 q->curr = buf;
288 buf->activate(dev,buf,next);
290 } else {
291 list_add_tail(&buf->vb.queue,&q->queue);
292 buf->vb.state = VIDEOBUF_QUEUED;
294 return 0;
297 void saa7134_buffer_finish(struct saa7134_dev *dev,
298 struct saa7134_dmaqueue *q,
299 unsigned int state)
301 assert_spin_locked(&dev->slock);
302 dprintk("buffer_finish %p\n",q->curr);
304 /* finish current buffer */
305 q->curr->vb.state = state;
306 do_gettimeofday(&q->curr->vb.ts);
307 wake_up(&q->curr->vb.done);
308 q->curr = NULL;
311 void saa7134_buffer_next(struct saa7134_dev *dev,
312 struct saa7134_dmaqueue *q)
314 struct saa7134_buf *buf,*next = NULL;
316 assert_spin_locked(&dev->slock);
317 BUG_ON(NULL != q->curr);
319 if (!list_empty(&q->queue)) {
320 /* activate next one from queue */
321 buf = list_entry(q->queue.next,struct saa7134_buf,vb.queue);
322 dprintk("buffer_next %p [prev=%p/next=%p]\n",
323 buf,q->queue.prev,q->queue.next);
324 list_del(&buf->vb.queue);
325 if (!list_empty(&q->queue))
326 next = list_entry(q->queue.next,struct saa7134_buf,
327 vb.queue);
328 q->curr = buf;
329 buf->activate(dev,buf,next);
330 dprintk("buffer_next #2 prev=%p/next=%p\n",
331 q->queue.prev,q->queue.next);
332 } else {
333 /* nothing to do -- just stop DMA */
334 dprintk("buffer_next %p\n",NULL);
335 saa7134_set_dmabits(dev);
336 del_timer(&q->timeout);
340 void saa7134_buffer_timeout(unsigned long data)
342 struct saa7134_dmaqueue *q = (struct saa7134_dmaqueue*)data;
343 struct saa7134_dev *dev = q->dev;
344 unsigned long flags;
346 spin_lock_irqsave(&dev->slock,flags);
348 /* try to reset the hardware (SWRST) */
349 saa_writeb(SAA7134_REGION_ENABLE, 0x00);
350 saa_writeb(SAA7134_REGION_ENABLE, 0x80);
351 saa_writeb(SAA7134_REGION_ENABLE, 0x00);
353 /* flag current buffer as failed,
354 try to start over with the next one. */
355 if (q->curr) {
356 dprintk("timeout on %p\n",q->curr);
357 saa7134_buffer_finish(dev,q,VIDEOBUF_ERROR);
359 saa7134_buffer_next(dev,q);
360 spin_unlock_irqrestore(&dev->slock,flags);
363 /* resends a current buffer in queue after resume */
365 static int saa7134_buffer_requeue(struct saa7134_dev *dev,
366 struct saa7134_dmaqueue *q)
368 struct saa7134_buf *buf, *next;
370 assert_spin_locked(&dev->slock);
372 buf = q->curr;
373 next = buf;
374 dprintk("buffer_requeue\n");
376 if (!buf)
377 return 0;
379 dprintk("buffer_requeue : resending active buffers \n");
381 if (!list_empty(&q->queue))
382 next = list_entry(q->queue.next, struct saa7134_buf,
383 vb.queue);
384 buf->activate(dev, buf, next);
386 return 0;
389 /* ------------------------------------------------------------------ */
391 int saa7134_set_dmabits(struct saa7134_dev *dev)
393 u32 split, task=0, ctrl=0, irq=0;
394 enum v4l2_field cap = V4L2_FIELD_ANY;
395 enum v4l2_field ov = V4L2_FIELD_ANY;
397 assert_spin_locked(&dev->slock);
399 if (dev->insuspend)
400 return 0;
402 /* video capture -- dma 0 + video task A */
403 if (dev->video_q.curr) {
404 task |= 0x01;
405 ctrl |= SAA7134_MAIN_CTRL_TE0;
406 irq |= SAA7134_IRQ1_INTE_RA0_1 |
407 SAA7134_IRQ1_INTE_RA0_0;
408 cap = dev->video_q.curr->vb.field;
411 /* video capture -- dma 1+2 (planar modes) */
412 if (dev->video_q.curr &&
413 dev->video_q.curr->fmt->planar) {
414 ctrl |= SAA7134_MAIN_CTRL_TE4 |
415 SAA7134_MAIN_CTRL_TE5;
418 /* screen overlay -- dma 0 + video task B */
419 if (dev->ovenable) {
420 task |= 0x10;
421 ctrl |= SAA7134_MAIN_CTRL_TE1;
422 ov = dev->ovfield;
425 /* vbi capture -- dma 0 + vbi task A+B */
426 if (dev->vbi_q.curr) {
427 task |= 0x22;
428 ctrl |= SAA7134_MAIN_CTRL_TE2 |
429 SAA7134_MAIN_CTRL_TE3;
430 irq |= SAA7134_IRQ1_INTE_RA0_7 |
431 SAA7134_IRQ1_INTE_RA0_6 |
432 SAA7134_IRQ1_INTE_RA0_5 |
433 SAA7134_IRQ1_INTE_RA0_4;
436 /* audio capture -- dma 3 */
437 if (dev->dmasound.dma_running) {
438 ctrl |= SAA7134_MAIN_CTRL_TE6;
439 irq |= SAA7134_IRQ1_INTE_RA3_1 |
440 SAA7134_IRQ1_INTE_RA3_0;
443 /* TS capture -- dma 5 */
444 if (dev->ts_q.curr) {
445 ctrl |= SAA7134_MAIN_CTRL_TE5;
446 irq |= SAA7134_IRQ1_INTE_RA2_3 |
447 SAA7134_IRQ1_INTE_RA2_2 |
448 SAA7134_IRQ1_INTE_RA2_1 |
449 SAA7134_IRQ1_INTE_RA2_0;
452 /* set task conditions + field handling */
453 if (V4L2_FIELD_HAS_BOTH(cap) || V4L2_FIELD_HAS_BOTH(ov) || cap == ov) {
454 /* default config -- use full frames */
455 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
456 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
457 saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x02);
458 saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x02);
459 split = 0;
460 } else {
461 /* split fields between tasks */
462 if (V4L2_FIELD_TOP == cap) {
463 /* odd A, even B, repeat */
464 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
465 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0e);
466 } else {
467 /* odd B, even A, repeat */
468 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0e);
469 saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
471 saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x01);
472 saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x01);
473 split = 1;
476 /* irqs */
477 saa_writeb(SAA7134_REGION_ENABLE, task);
478 saa_writel(SAA7134_IRQ1, irq);
479 saa_andorl(SAA7134_MAIN_CTRL,
480 SAA7134_MAIN_CTRL_TE0 |
481 SAA7134_MAIN_CTRL_TE1 |
482 SAA7134_MAIN_CTRL_TE2 |
483 SAA7134_MAIN_CTRL_TE3 |
484 SAA7134_MAIN_CTRL_TE4 |
485 SAA7134_MAIN_CTRL_TE5 |
486 SAA7134_MAIN_CTRL_TE6,
487 ctrl);
488 dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
489 task, ctrl, irq, split ? "no" : "yes");
491 return 0;
494 /* ------------------------------------------------------------------ */
495 /* IRQ handler + helpers */
497 static char *irqbits[] = {
498 "DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3",
499 "AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC",
500 "TRIG_ERR", "CONF_ERR", "LOAD_ERR",
501 "GPIO16?", "GPIO18", "GPIO22", "GPIO23"
503 #define IRQBITS ARRAY_SIZE(irqbits)
505 static void print_irqstatus(struct saa7134_dev *dev, int loop,
506 unsigned long report, unsigned long status)
508 unsigned int i;
510 printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx",
511 dev->name,loop,jiffies,report,status);
512 for (i = 0; i < IRQBITS; i++) {
513 if (!(report & (1 << i)))
514 continue;
515 printk(" %s",irqbits[i]);
517 if (report & SAA7134_IRQ_REPORT_DONE_RA0) {
518 printk(" | RA0=%s,%s,%s,%ld",
519 (status & 0x40) ? "vbi" : "video",
520 (status & 0x20) ? "b" : "a",
521 (status & 0x10) ? "odd" : "even",
522 (status & 0x0f));
524 printk("\n");
527 static irqreturn_t saa7134_irq(int irq, void *dev_id)
529 struct saa7134_dev *dev = (struct saa7134_dev*) dev_id;
530 unsigned long report,status;
531 int loop, handled = 0;
533 if (dev->insuspend)
534 goto out;
536 for (loop = 0; loop < 10; loop++) {
537 report = saa_readl(SAA7134_IRQ_REPORT);
538 status = saa_readl(SAA7134_IRQ_STATUS);
540 /* If dmasound support is active and we get a sound report,
541 * mask out the report and let the saa7134-alsa module deal
542 * with it */
543 if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
544 (dev->dmasound.priv_data != NULL) )
546 if (irq_debug > 1)
547 printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
548 dev->name);
549 report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
552 if (0 == report) {
553 if (irq_debug > 1)
554 printk(KERN_DEBUG "%s/irq: no (more) work\n",
555 dev->name);
556 goto out;
559 handled = 1;
560 saa_writel(SAA7134_IRQ_REPORT,report);
561 if (irq_debug)
562 print_irqstatus(dev,loop,report,status);
565 if ((report & SAA7134_IRQ_REPORT_RDCAP) ||
566 (report & SAA7134_IRQ_REPORT_INTL))
567 saa7134_irq_video_signalchange(dev);
570 if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
571 (status & 0x60) == 0)
572 saa7134_irq_video_done(dev,status);
574 if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
575 (status & 0x40) == 0x40)
576 saa7134_irq_vbi_done(dev,status);
578 if ((report & SAA7134_IRQ_REPORT_DONE_RA2) &&
579 card_has_mpeg(dev))
580 saa7134_irq_ts_done(dev,status);
582 if (report & SAA7134_IRQ_REPORT_GPIO16) {
583 switch (dev->has_remote) {
584 case SAA7134_REMOTE_GPIO:
585 if (!dev->remote)
586 break;
587 if (dev->remote->mask_keydown & 0x10000) {
588 saa7134_input_irq(dev);
590 break;
592 case SAA7134_REMOTE_I2C:
593 break; /* FIXME: invoke I2C get_key() */
595 default: /* GPIO16 not used by IR remote */
596 break;
600 if (report & SAA7134_IRQ_REPORT_GPIO18) {
601 switch (dev->has_remote) {
602 case SAA7134_REMOTE_GPIO:
603 if (!dev->remote)
604 break;
605 if ((dev->remote->mask_keydown & 0x40000) ||
606 (dev->remote->mask_keyup & 0x40000)) {
607 saa7134_input_irq(dev);
609 break;
611 case SAA7134_REMOTE_I2C:
612 break; /* FIXME: invoke I2C get_key() */
614 default: /* GPIO18 not used by IR remote */
615 break;
620 if (10 == loop) {
621 print_irqstatus(dev,loop,report,status);
622 if (report & SAA7134_IRQ_REPORT_PE) {
623 /* disable all parity error */
624 printk(KERN_WARNING "%s/irq: looping -- "
625 "clearing PE (parity error!) enable bit\n",dev->name);
626 saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
627 } else if (report & SAA7134_IRQ_REPORT_GPIO16) {
628 /* disable gpio16 IRQ */
629 printk(KERN_WARNING "%s/irq: looping -- "
630 "clearing GPIO16 enable bit\n",dev->name);
631 saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16);
632 } else if (report & SAA7134_IRQ_REPORT_GPIO18) {
633 /* disable gpio18 IRQs */
634 printk(KERN_WARNING "%s/irq: looping -- "
635 "clearing GPIO18 enable bit\n",dev->name);
636 saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
637 } else {
638 /* disable all irqs */
639 printk(KERN_WARNING "%s/irq: looping -- "
640 "clearing all enable bits\n",dev->name);
641 saa_writel(SAA7134_IRQ1,0);
642 saa_writel(SAA7134_IRQ2,0);
646 out:
647 return IRQ_RETVAL(handled);
650 /* ------------------------------------------------------------------ */
652 /* early init (no i2c, no irq) */
654 static int saa7134_hw_enable1(struct saa7134_dev *dev)
656 /* RAM FIFO config */
657 saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
658 saa_writel(SAA7134_THRESHOULD, 0x02020202);
660 /* enable audio + video processing */
661 saa_writel(SAA7134_MAIN_CTRL,
662 SAA7134_MAIN_CTRL_VPLLE |
663 SAA7134_MAIN_CTRL_APLLE |
664 SAA7134_MAIN_CTRL_EXOSC |
665 SAA7134_MAIN_CTRL_EVFE1 |
666 SAA7134_MAIN_CTRL_EVFE2 |
667 SAA7134_MAIN_CTRL_ESFE |
668 SAA7134_MAIN_CTRL_EBDAC);
671 * Initialize OSS _after_ enabling audio clock PLL and audio processing.
672 * OSS initialization writes to registers via the audio DSP; these
673 * writes will fail unless the audio clock has been started. At worst,
674 * audio will not work.
677 /* enable peripheral devices */
678 saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
680 /* set vertical line numbering start (vbi needs this) */
681 saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
683 return 0;
686 static int saa7134_hwinit1(struct saa7134_dev *dev)
688 dprintk("hwinit1\n");
690 saa_writel(SAA7134_IRQ1, 0);
691 saa_writel(SAA7134_IRQ2, 0);
692 mutex_init(&dev->lock);
693 spin_lock_init(&dev->slock);
695 saa7134_track_gpio(dev,"pre-init");
696 saa7134_video_init1(dev);
697 saa7134_vbi_init1(dev);
698 if (card_has_mpeg(dev))
699 saa7134_ts_init1(dev);
700 saa7134_input_init1(dev);
702 saa7134_hw_enable1(dev);
704 return 0;
707 /* late init (with i2c + irq) */
708 static int saa7134_hw_enable2(struct saa7134_dev *dev)
711 unsigned int irq2_mask;
713 /* enable IRQ's */
714 irq2_mask =
715 SAA7134_IRQ2_INTE_DEC3 |
716 SAA7134_IRQ2_INTE_DEC2 |
717 SAA7134_IRQ2_INTE_DEC1 |
718 SAA7134_IRQ2_INTE_DEC0 |
719 SAA7134_IRQ2_INTE_PE |
720 SAA7134_IRQ2_INTE_AR;
722 if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
723 if (dev->remote->mask_keydown & 0x10000)
724 irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
725 else if (dev->remote->mask_keydown & 0x40000)
726 irq2_mask |= SAA7134_IRQ2_INTE_GPIO18;
727 else if (dev->remote->mask_keyup & 0x40000)
728 irq2_mask |= SAA7134_IRQ2_INTE_GPIO18A;
731 saa_writel(SAA7134_IRQ1, 0);
732 saa_writel(SAA7134_IRQ2, irq2_mask);
734 return 0;
737 static int saa7134_hwinit2(struct saa7134_dev *dev)
740 dprintk("hwinit2\n");
742 saa7134_video_init2(dev);
743 saa7134_tvaudio_init2(dev);
745 saa7134_hw_enable2(dev);
747 return 0;
751 /* shutdown */
752 static int saa7134_hwfini(struct saa7134_dev *dev)
754 dprintk("hwfini\n");
756 if (card_has_mpeg(dev))
757 saa7134_ts_fini(dev);
758 saa7134_input_fini(dev);
759 saa7134_vbi_fini(dev);
760 saa7134_tvaudio_fini(dev);
761 return 0;
764 static void __devinit must_configure_manually(void)
766 unsigned int i,p;
768 printk(KERN_WARNING
769 "saa7134: <rant>\n"
770 "saa7134: Congratulations! Your TV card vendor saved a few\n"
771 "saa7134: cents for a eeprom, thus your pci board has no\n"
772 "saa7134: subsystem ID and I can't identify it automatically\n"
773 "saa7134: </rant>\n"
774 "saa7134: I feel better now. Ok, here are the good news:\n"
775 "saa7134: You can use the card=<nr> insmod option to specify\n"
776 "saa7134: which board do you have. The list:\n");
777 for (i = 0; i < saa7134_bcount; i++) {
778 printk(KERN_WARNING "saa7134: card=%d -> %-40.40s",
779 i,saa7134_boards[i].name);
780 for (p = 0; saa7134_pci_tbl[p].driver_data; p++) {
781 if (saa7134_pci_tbl[p].driver_data != i)
782 continue;
783 printk(" %04x:%04x",
784 saa7134_pci_tbl[p].subvendor,
785 saa7134_pci_tbl[p].subdevice);
787 printk("\n");
791 static struct video_device *vdev_init(struct saa7134_dev *dev,
792 struct video_device *template,
793 char *type)
795 struct video_device *vfd;
797 vfd = video_device_alloc();
798 if (NULL == vfd)
799 return NULL;
800 *vfd = *template;
801 vfd->minor = -1;
802 vfd->dev = &dev->pci->dev;
803 vfd->release = video_device_release;
804 vfd->debug = video_debug;
805 snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
806 dev->name, type, saa7134_boards[dev->board].name);
807 return vfd;
810 static void saa7134_unregister_video(struct saa7134_dev *dev)
812 if (dev->video_dev) {
813 if (-1 != dev->video_dev->minor)
814 video_unregister_device(dev->video_dev);
815 else
816 video_device_release(dev->video_dev);
817 dev->video_dev = NULL;
819 if (dev->vbi_dev) {
820 if (-1 != dev->vbi_dev->minor)
821 video_unregister_device(dev->vbi_dev);
822 else
823 video_device_release(dev->vbi_dev);
824 dev->vbi_dev = NULL;
826 if (dev->radio_dev) {
827 if (-1 != dev->radio_dev->minor)
828 video_unregister_device(dev->radio_dev);
829 else
830 video_device_release(dev->radio_dev);
831 dev->radio_dev = NULL;
835 static void mpeg_ops_attach(struct saa7134_mpeg_ops *ops,
836 struct saa7134_dev *dev)
838 int err;
840 if (NULL != dev->mops)
841 return;
842 if (saa7134_boards[dev->board].mpeg != ops->type)
843 return;
844 err = ops->init(dev);
845 if (0 != err)
846 return;
847 dev->mops = ops;
850 static void mpeg_ops_detach(struct saa7134_mpeg_ops *ops,
851 struct saa7134_dev *dev)
853 if (NULL == dev->mops)
854 return;
855 if (dev->mops != ops)
856 return;
857 dev->mops->fini(dev);
858 dev->mops = NULL;
861 static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
862 const struct pci_device_id *pci_id)
864 struct saa7134_dev *dev;
865 struct saa7134_mpeg_ops *mops;
866 int err;
868 if (saa7134_devcount == SAA7134_MAXBOARDS)
869 return -ENOMEM;
871 dev = kzalloc(sizeof(*dev),GFP_KERNEL);
872 if (NULL == dev)
873 return -ENOMEM;
875 /* pci init */
876 dev->pci = pci_dev;
877 if (pci_enable_device(pci_dev)) {
878 err = -EIO;
879 goto fail1;
882 dev->nr = saa7134_devcount;
883 sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr);
885 /* pci quirks */
886 if (pci_pci_problems) {
887 if (pci_pci_problems & PCIPCI_TRITON)
888 printk(KERN_INFO "%s: quirk: PCIPCI_TRITON\n", dev->name);
889 if (pci_pci_problems & PCIPCI_NATOMA)
890 printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA\n", dev->name);
891 if (pci_pci_problems & PCIPCI_VIAETBF)
892 printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF\n", dev->name);
893 if (pci_pci_problems & PCIPCI_VSFX)
894 printk(KERN_INFO "%s: quirk: PCIPCI_VSFX\n",dev->name);
895 #ifdef PCIPCI_ALIMAGIK
896 if (pci_pci_problems & PCIPCI_ALIMAGIK) {
897 printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
898 dev->name);
899 latency = 0x0A;
901 #endif
902 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
903 printk(KERN_INFO "%s: quirk: this driver and your "
904 "chipset may not work together"
905 " in overlay mode.\n",dev->name);
906 if (!saa7134_no_overlay) {
907 printk(KERN_INFO "%s: quirk: overlay "
908 "mode will be disabled.\n",
909 dev->name);
910 saa7134_no_overlay = 1;
911 } else {
912 printk(KERN_INFO "%s: quirk: overlay "
913 "mode will be forced. Use this"
914 " option at your own risk.\n",
915 dev->name);
919 if (UNSET != latency) {
920 printk(KERN_INFO "%s: setting pci latency timer to %d\n",
921 dev->name,latency);
922 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
925 /* print pci info */
926 pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
927 pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
928 printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, "
929 "latency: %d, mmio: 0x%llx\n", dev->name,
930 pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
931 dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
932 pci_set_master(pci_dev);
933 if (!pci_dma_supported(pci_dev, DMA_32BIT_MASK)) {
934 printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name);
935 err = -EIO;
936 goto fail1;
939 /* board config */
940 dev->board = pci_id->driver_data;
941 if (card[dev->nr] >= 0 &&
942 card[dev->nr] < saa7134_bcount)
943 dev->board = card[dev->nr];
944 if (SAA7134_BOARD_NOAUTO == dev->board) {
945 must_configure_manually();
946 dev->board = SAA7134_BOARD_UNKNOWN;
948 dev->autodetected = card[dev->nr] != dev->board;
949 dev->tuner_type = saa7134_boards[dev->board].tuner_type;
950 dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
951 if (UNSET != tuner[dev->nr])
952 dev->tuner_type = tuner[dev->nr];
953 printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
954 dev->name,pci_dev->subsystem_vendor,
955 pci_dev->subsystem_device,saa7134_boards[dev->board].name,
956 dev->board, dev->autodetected ?
957 "autodetected" : "insmod option");
959 /* get mmio */
960 if (!request_mem_region(pci_resource_start(pci_dev,0),
961 pci_resource_len(pci_dev,0),
962 dev->name)) {
963 err = -EBUSY;
964 printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
965 dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
966 goto fail1;
968 dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000);
969 dev->bmmio = (__u8 __iomem *)dev->lmmio;
970 if (NULL == dev->lmmio) {
971 err = -EIO;
972 printk(KERN_ERR "%s: can't ioremap() MMIO memory\n",
973 dev->name);
974 goto fail2;
977 /* initialize hardware #1 */
978 saa7134_board_init1(dev);
979 saa7134_hwinit1(dev);
981 /* get irq */
982 err = request_irq(pci_dev->irq, saa7134_irq,
983 IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
984 if (err < 0) {
985 printk(KERN_ERR "%s: can't get IRQ %d\n",
986 dev->name,pci_dev->irq);
987 goto fail3;
990 /* wait a bit, register i2c bus */
991 msleep(100);
992 saa7134_i2c_register(dev);
994 /* initialize hardware #2 */
995 if (TUNER_ABSENT != dev->tuner_type)
996 request_module("tuner");
997 saa7134_board_init2(dev);
999 saa7134_hwinit2(dev);
1001 /* load i2c helpers */
1002 if (card_is_empress(dev)) {
1003 request_module("saa6752hs");
1006 request_submodules(dev);
1008 v4l2_prio_init(&dev->prio);
1010 /* register v4l devices */
1011 if (saa7134_no_overlay <= 0) {
1012 saa7134_video_template.type |= VID_TYPE_OVERLAY;
1013 } else {
1014 printk("%s: Overlay support disabled.\n",dev->name);
1016 dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
1017 err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
1018 video_nr[dev->nr]);
1019 if (err < 0) {
1020 printk(KERN_INFO "%s: can't register video device\n",
1021 dev->name);
1022 goto fail4;
1024 printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
1025 dev->name,dev->video_dev->minor & 0x1f);
1027 dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
1028 dev->vbi_dev->type = VID_TYPE_TUNER | VID_TYPE_TELETEXT;
1030 err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
1031 vbi_nr[dev->nr]);
1032 if (err < 0)
1033 goto fail4;
1034 printk(KERN_INFO "%s: registered device vbi%d\n",
1035 dev->name,dev->vbi_dev->minor & 0x1f);
1037 if (card_has_radio(dev)) {
1038 dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
1039 err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
1040 radio_nr[dev->nr]);
1041 if (err < 0)
1042 goto fail4;
1043 printk(KERN_INFO "%s: registered device radio%d\n",
1044 dev->name,dev->radio_dev->minor & 0x1f);
1047 /* everything worked */
1048 pci_set_drvdata(pci_dev,dev);
1049 saa7134_devcount++;
1051 mutex_lock(&devlist_lock);
1052 list_for_each_entry(mops, &mops_list, next)
1053 mpeg_ops_attach(mops, dev);
1054 list_add_tail(&dev->devlist,&saa7134_devlist);
1055 mutex_unlock(&devlist_lock);
1057 /* check for signal */
1058 saa7134_irq_video_signalchange(dev);
1060 if (saa7134_dmasound_init && !dev->dmasound.priv_data) {
1061 saa7134_dmasound_init(dev);
1064 if (TUNER_ABSENT != dev->tuner_type)
1065 saa7134_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
1067 return 0;
1069 fail4:
1070 saa7134_unregister_video(dev);
1071 saa7134_i2c_unregister(dev);
1072 free_irq(pci_dev->irq, dev);
1073 fail3:
1074 saa7134_hwfini(dev);
1075 iounmap(dev->lmmio);
1076 fail2:
1077 release_mem_region(pci_resource_start(pci_dev,0),
1078 pci_resource_len(pci_dev,0));
1079 fail1:
1080 kfree(dev);
1081 return err;
1084 static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
1086 struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
1087 struct saa7134_mpeg_ops *mops;
1089 /* Release DMA sound modules if present */
1090 if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
1091 saa7134_dmasound_exit(dev);
1094 /* debugging ... */
1095 if (irq_debug) {
1096 u32 report = saa_readl(SAA7134_IRQ_REPORT);
1097 u32 status = saa_readl(SAA7134_IRQ_STATUS);
1098 print_irqstatus(dev,42,report,status);
1101 /* disable peripheral devices */
1102 saa_writeb(SAA7134_SPECIAL_MODE,0);
1104 /* shutdown hardware */
1105 saa_writel(SAA7134_IRQ1,0);
1106 saa_writel(SAA7134_IRQ2,0);
1107 saa_writel(SAA7134_MAIN_CTRL,0);
1109 /* shutdown subsystems */
1110 saa7134_hwfini(dev);
1112 /* unregister */
1113 mutex_lock(&devlist_lock);
1114 list_del(&dev->devlist);
1115 list_for_each_entry(mops, &mops_list, next)
1116 mpeg_ops_detach(mops, dev);
1117 mutex_unlock(&devlist_lock);
1118 saa7134_devcount--;
1120 saa7134_i2c_unregister(dev);
1121 saa7134_unregister_video(dev);
1124 /* the DMA sound modules should be unloaded before reaching
1125 this, but just in case they are still present... */
1126 if (dev->dmasound.priv_data != NULL) {
1127 free_irq(pci_dev->irq, &dev->dmasound);
1128 dev->dmasound.priv_data = NULL;
1132 /* release resources */
1133 free_irq(pci_dev->irq, dev);
1134 iounmap(dev->lmmio);
1135 release_mem_region(pci_resource_start(pci_dev,0),
1136 pci_resource_len(pci_dev,0));
1138 pci_set_drvdata(pci_dev, NULL);
1140 /* free memory */
1141 kfree(dev);
1144 #ifdef CONFIG_PM
1145 static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state)
1148 struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
1150 /* disable overlay - apps should enable it explicitly on resume*/
1151 dev->ovenable = 0;
1153 /* Disable interrupts, DMA, and rest of the chip*/
1154 saa_writel(SAA7134_IRQ1, 0);
1155 saa_writel(SAA7134_IRQ2, 0);
1156 saa_writel(SAA7134_MAIN_CTRL, 0);
1158 dev->insuspend = 1;
1159 synchronize_irq(pci_dev->irq);
1161 /* ACK interrupts once more, just in case,
1162 since the IRQ handler won't ack them anymore*/
1164 saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
1166 /* Disable timeout timers - if we have active buffers, we will
1167 fill them on resume*/
1169 del_timer(&dev->video_q.timeout);
1170 del_timer(&dev->vbi_q.timeout);
1171 del_timer(&dev->ts_q.timeout);
1173 if (dev->remote)
1174 saa7134_ir_stop(dev);
1176 pci_save_state(pci_dev);
1177 pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
1179 return 0;
1182 static int saa7134_resume(struct pci_dev *pci_dev)
1184 struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
1185 unsigned long flags;
1187 pci_set_power_state(pci_dev, PCI_D0);
1188 pci_restore_state(pci_dev);
1190 /* Do things that are done in saa7134_initdev ,
1191 except of initializing memory structures.*/
1193 saa7134_board_init1(dev);
1195 /* saa7134_hwinit1 */
1196 if (saa7134_boards[dev->board].video_out)
1197 saa7134_videoport_init(dev);
1198 if (card_has_mpeg(dev))
1199 saa7134_ts_init_hw(dev);
1200 if (dev->remote)
1201 saa7134_ir_start(dev, dev->remote);
1202 saa7134_hw_enable1(dev);
1204 msleep(100);
1206 saa7134_board_init2(dev);
1208 /*saa7134_hwinit2*/
1209 saa7134_set_tvnorm_hw(dev);
1210 saa7134_tvaudio_setmute(dev);
1211 saa7134_tvaudio_setvolume(dev, dev->ctl_volume);
1212 saa7134_tvaudio_init(dev);
1213 saa7134_tvaudio_do_scan(dev);
1214 saa7134_enable_i2s(dev);
1215 saa7134_hw_enable2(dev);
1217 saa7134_irq_video_signalchange(dev);
1219 /*resume unfinished buffer(s)*/
1220 spin_lock_irqsave(&dev->slock, flags);
1221 saa7134_buffer_requeue(dev, &dev->video_q);
1222 saa7134_buffer_requeue(dev, &dev->vbi_q);
1223 saa7134_buffer_requeue(dev, &dev->ts_q);
1225 /* FIXME: Disable DMA audio sound - temporary till proper support
1226 is implemented*/
1228 dev->dmasound.dma_running = 0;
1230 /* start DMA now*/
1231 dev->insuspend = 0;
1232 smp_wmb();
1233 saa7134_set_dmabits(dev);
1234 spin_unlock_irqrestore(&dev->slock, flags);
1236 return 0;
1238 #endif
1240 /* ----------------------------------------------------------- */
1242 int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
1244 struct saa7134_dev *dev;
1246 mutex_lock(&devlist_lock);
1247 list_for_each_entry(dev, &saa7134_devlist, devlist)
1248 mpeg_ops_attach(ops, dev);
1249 list_add_tail(&ops->next,&mops_list);
1250 mutex_unlock(&devlist_lock);
1251 return 0;
1254 void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
1256 struct saa7134_dev *dev;
1258 mutex_lock(&devlist_lock);
1259 list_del(&ops->next);
1260 list_for_each_entry(dev, &saa7134_devlist, devlist)
1261 mpeg_ops_detach(ops, dev);
1262 mutex_unlock(&devlist_lock);
1265 EXPORT_SYMBOL(saa7134_ts_register);
1266 EXPORT_SYMBOL(saa7134_ts_unregister);
1268 /* ----------------------------------------------------------- */
1270 static struct pci_driver saa7134_pci_driver = {
1271 .name = "saa7134",
1272 .id_table = saa7134_pci_tbl,
1273 .probe = saa7134_initdev,
1274 .remove = __devexit_p(saa7134_finidev),
1275 #ifdef CONFIG_PM
1276 .suspend = saa7134_suspend,
1277 .resume = saa7134_resume
1278 #endif
1281 static int saa7134_init(void)
1283 INIT_LIST_HEAD(&saa7134_devlist);
1284 printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n",
1285 (SAA7134_VERSION_CODE >> 16) & 0xff,
1286 (SAA7134_VERSION_CODE >> 8) & 0xff,
1287 SAA7134_VERSION_CODE & 0xff);
1288 #ifdef SNAPSHOT
1289 printk(KERN_INFO "saa7130/34: snapshot date %04d-%02d-%02d\n",
1290 SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
1291 #endif
1292 return pci_register_driver(&saa7134_pci_driver);
1295 static void saa7134_fini(void)
1297 pci_unregister_driver(&saa7134_pci_driver);
1300 module_init(saa7134_init);
1301 module_exit(saa7134_fini);
1303 /* ----------------------------------------------------------- */
1305 EXPORT_SYMBOL(saa7134_set_gpio);
1306 EXPORT_SYMBOL(saa7134_i2c_call_clients);
1307 EXPORT_SYMBOL(saa7134_devlist);
1308 EXPORT_SYMBOL(saa7134_boards);
1310 /* ----------------- for the DMA sound modules --------------- */
1312 EXPORT_SYMBOL(saa7134_dmasound_init);
1313 EXPORT_SYMBOL(saa7134_dmasound_exit);
1314 EXPORT_SYMBOL(saa7134_pgtable_free);
1315 EXPORT_SYMBOL(saa7134_pgtable_build);
1316 EXPORT_SYMBOL(saa7134_pgtable_alloc);
1317 EXPORT_SYMBOL(saa7134_set_dmabits);
1319 /* ----------------------------------------------------------- */
1321 * Local variables:
1322 * c-basic-offset: 8
1323 * End: