PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
[linux-ginger.git] / drivers / mmc / core / sdio_ops.c
blobc8fa095a4488689bb9ae35dee41bd482abe3a157
1 /*
2 * linux/drivers/mmc/sdio_ops.c
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/scatterlist.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/mmc.h>
17 #include <linux/mmc/sdio.h>
19 #include "core.h"
20 #include "sdio_ops.h"
22 int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
24 struct mmc_command cmd;
25 int i, err = 0;
27 BUG_ON(!host);
29 memset(&cmd, 0, sizeof(struct mmc_command));
31 cmd.opcode = SD_IO_SEND_OP_COND;
32 cmd.arg = ocr;
33 cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
35 for (i = 100; i; i--) {
36 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
37 if (err)
38 break;
40 /* if we're just probing, do a single pass */
41 if (ocr == 0)
42 break;
44 /* otherwise wait until reset completes */
45 if (mmc_host_is_spi(host)) {
47 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
48 * an initialized card under SPI, but some cards
49 * (Marvell's) only behave when looking at this
50 * one.
52 if (cmd.resp[1] & MMC_CARD_BUSY)
53 break;
54 } else {
55 if (cmd.resp[0] & MMC_CARD_BUSY)
56 break;
59 err = -ETIMEDOUT;
61 mmc_delay(10);
64 if (rocr)
65 *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
67 return err;
70 int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
71 unsigned addr, u8 in, u8* out)
73 struct mmc_command cmd;
74 int err;
76 BUG_ON(!card);
77 BUG_ON(fn > 7);
79 memset(&cmd, 0, sizeof(struct mmc_command));
81 cmd.opcode = SD_IO_RW_DIRECT;
82 cmd.arg = write ? 0x80000000 : 0x00000000;
83 cmd.arg |= fn << 28;
84 cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
85 cmd.arg |= addr << 9;
86 cmd.arg |= in;
87 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
89 err = mmc_wait_for_cmd(card->host, &cmd, 0);
90 if (err)
91 return err;
93 if (mmc_host_is_spi(card->host)) {
94 /* host driver already reported errors */
95 } else {
96 if (cmd.resp[0] & R5_ERROR)
97 return -EIO;
98 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
99 return -EINVAL;
100 if (cmd.resp[0] & R5_OUT_OF_RANGE)
101 return -ERANGE;
104 if (out) {
105 if (mmc_host_is_spi(card->host))
106 *out = (cmd.resp[0] >> 8) & 0xFF;
107 else
108 *out = cmd.resp[0] & 0xFF;
111 return 0;
114 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
115 unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
117 struct mmc_request mrq;
118 struct mmc_command cmd;
119 struct mmc_data data;
120 struct scatterlist sg;
122 BUG_ON(!card);
123 BUG_ON(fn > 7);
124 BUG_ON(blocks == 1 && blksz > 512);
125 WARN_ON(blocks == 0);
126 WARN_ON(blksz == 0);
128 memset(&mrq, 0, sizeof(struct mmc_request));
129 memset(&cmd, 0, sizeof(struct mmc_command));
130 memset(&data, 0, sizeof(struct mmc_data));
132 mrq.cmd = &cmd;
133 mrq.data = &data;
135 cmd.opcode = SD_IO_RW_EXTENDED;
136 cmd.arg = write ? 0x80000000 : 0x00000000;
137 cmd.arg |= fn << 28;
138 cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
139 cmd.arg |= addr << 9;
140 if (blocks == 1 && blksz <= 512)
141 cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
142 else
143 cmd.arg |= 0x08000000 | blocks; /* block mode */
144 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
146 data.blksz = blksz;
147 data.blocks = blocks;
148 data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
149 data.sg = &sg;
150 data.sg_len = 1;
152 sg_init_one(&sg, buf, blksz * blocks);
154 mmc_set_data_timeout(&data, card);
156 mmc_wait_for_req(card->host, &mrq);
158 if (cmd.error)
159 return cmd.error;
160 if (data.error)
161 return data.error;
163 if (mmc_host_is_spi(card->host)) {
164 /* host driver already reported errors */
165 } else {
166 if (cmd.resp[0] & R5_ERROR)
167 return -EIO;
168 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
169 return -EINVAL;
170 if (cmd.resp[0] & R5_OUT_OF_RANGE)
171 return -ERANGE;
174 return 0;