2 * linux/arch/arm/mach-nomadik/board-8815nhk.c
4 * Copyright (C) STMicroelectronics
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2, as
8 * published by the Free Software Foundation.
10 * NHK15 board specifc driver definition
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/amba/bus.h>
17 #include <linux/interrupt.h>
18 #include <linux/gpio.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/nand.h>
21 #include <linux/mtd/partitions.h>
23 #include <asm/sizes.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/irq.h>
27 #include <asm/mach/flash.h>
28 #include <mach/setup.h>
29 #include <mach/nand.h>
30 #include <mach/fsmc.h>
33 /* These adresses span 16MB, so use three individual pages */
34 static struct resource nhk8815_nand_resources
[] = {
37 .start
= NAND_IO_ADDR
,
38 .end
= NAND_IO_ADDR
+ 0xfff,
39 .flags
= IORESOURCE_MEM
,
43 .end
= NAND_IO_CMD
+ 0xfff,
44 .flags
= IORESOURCE_MEM
,
47 .start
= NAND_IO_DATA
,
48 .end
= NAND_IO_DATA
+ 0xfff,
49 .flags
= IORESOURCE_MEM
,
53 static int nhk8815_nand_init(void)
55 /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
56 writel(0x0000000E, FSMC_PCR(0));
57 writel(0x000D0A00, FSMC_PMEM(0));
58 writel(0x00100A00, FSMC_PATT(0));
60 /* enable access to the chip select area */
61 writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
67 * These partitions are the same as those used in the 2.6.20 release
68 * shipped by the vendor; the first two partitions are mandated
69 * by the boot ROM, and the bootloader area is somehow oversized...
71 static struct mtd_partition nhk8815_partitions
[] = {
73 .name
= "X-Loader(NAND)",
77 .name
= "MemInit(NAND)",
78 .offset
= MTDPART_OFS_APPEND
,
81 .name
= "BootLoader(NAND)",
82 .offset
= MTDPART_OFS_APPEND
,
85 .name
= "Kernel zImage(NAND)",
86 .offset
= MTDPART_OFS_APPEND
,
89 .name
= "Root Filesystem(NAND)",
90 .offset
= MTDPART_OFS_APPEND
,
93 .name
= "User Filesystem(NAND)",
94 .offset
= MTDPART_OFS_APPEND
,
95 .size
= MTDPART_SIZ_FULL
,
99 static struct nomadik_nand_platform_data nhk8815_nand_data
= {
100 .parts
= nhk8815_partitions
,
101 .nparts
= ARRAY_SIZE(nhk8815_partitions
),
102 .options
= NAND_COPYBACK
| NAND_CACHEPRG
| NAND_NO_PADDING \
103 | NAND_NO_READRDY
| NAND_NO_AUTOINCR
,
104 .init
= nhk8815_nand_init
,
107 static struct platform_device nhk8815_nand_device
= {
108 .name
= "nomadik_nand",
110 .platform_data
= &nhk8815_nand_data
,
112 .resource
= nhk8815_nand_resources
,
113 .num_resources
= ARRAY_SIZE(nhk8815_nand_resources
),
116 /* These are the partitions for the OneNand device, different from above */
117 static struct mtd_partition nhk8815_onenand_partitions
[] = {
119 .name
= "X-Loader(OneNAND)",
123 .name
= "MemInit(OneNAND)",
124 .offset
= MTDPART_OFS_APPEND
,
127 .name
= "BootLoader(OneNAND)",
128 .offset
= MTDPART_OFS_APPEND
,
129 .size
= SZ_2M
-SZ_256K
,
131 .name
= "SysImage(OneNAND)",
132 .offset
= MTDPART_OFS_APPEND
,
135 .name
= "Root Filesystem(OneNAND)",
136 .offset
= MTDPART_OFS_APPEND
,
139 .name
= "User Filesystem(OneNAND)",
140 .offset
= MTDPART_OFS_APPEND
,
141 .size
= MTDPART_SIZ_FULL
,
145 static struct flash_platform_data nhk8815_onenand_data
= {
146 .parts
= nhk8815_onenand_partitions
,
147 .nr_parts
= ARRAY_SIZE(nhk8815_onenand_partitions
),
150 static struct resource nhk8815_onenand_resource
[] = {
153 .end
= 0x30000000 + SZ_128K
- 1,
154 .flags
= IORESOURCE_MEM
,
158 static struct platform_device nhk8815_onenand_device
= {
162 .platform_data
= &nhk8815_onenand_data
,
164 .resource
= nhk8815_onenand_resource
,
165 .num_resources
= ARRAY_SIZE(nhk8815_onenand_resource
),
168 static void __init
nhk8815_onenand_init(void)
170 #ifdef CONFIG_ONENAND
171 /* Set up SMCS0 for OneNand */
172 writel(0x000030db, FSMC_BCR0
);
173 writel(0x02100551, FSMC_BTR0
);
177 #define __MEM_4K_RESOURCE(x) \
178 .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
180 static struct amba_device uart0_device
= {
181 .dev
= { .init_name
= "uart0" },
182 __MEM_4K_RESOURCE(NOMADIK_UART0_BASE
),
183 .irq
= {IRQ_UART0
, NO_IRQ
},
186 static struct amba_device uart1_device
= {
187 .dev
= { .init_name
= "uart1" },
188 __MEM_4K_RESOURCE(NOMADIK_UART1_BASE
),
189 .irq
= {IRQ_UART1
, NO_IRQ
},
192 static struct amba_device
*amba_devs
[] __initdata
= {
197 /* We have a fixed clock alone, by now */
198 static struct clk nhk8815_clk_48
= {
199 .rate
= 48*1000*1000,
202 static struct resource nhk8815_eth_resources
[] = {
204 .name
= "smc91x-regs",
205 .start
= 0x34000000 + 0x300,
206 .end
= 0x34000000 + SZ_64K
- 1,
207 .flags
= IORESOURCE_MEM
,
209 .start
= NOMADIK_GPIO_TO_IRQ(115),
210 .end
= NOMADIK_GPIO_TO_IRQ(115),
211 .flags
= IORESOURCE_IRQ
| IRQF_TRIGGER_RISING
,
215 static struct platform_device nhk8815_eth_device
= {
217 .resource
= nhk8815_eth_resources
,
218 .num_resources
= ARRAY_SIZE(nhk8815_eth_resources
),
221 static int __init
nhk8815_eth_init(void)
223 int gpio_nr
= 115; /* hardwired in the board */
226 err
= gpio_request(gpio_nr
, "eth_irq");
227 if (!err
) err
= nmk_gpio_set_mode(gpio_nr
, NMK_GPIO_ALT_GPIO
);
228 if (!err
) err
= gpio_direction_input(gpio_nr
);
230 pr_err("Error %i in %s\n", err
, __func__
);
233 device_initcall(nhk8815_eth_init
);
235 static struct platform_device
*nhk8815_platform_devices
[] __initdata
= {
236 &nhk8815_nand_device
,
237 &nhk8815_onenand_device
,
239 /* will add more devices */
242 static void __init
nhk8815_platform_init(void)
246 cpu8815_platform_init();
247 nhk8815_onenand_init();
248 platform_add_devices(nhk8815_platform_devices
,
249 ARRAY_SIZE(nhk8815_platform_devices
));
251 for (i
= 0; i
< ARRAY_SIZE(amba_devs
); i
++) {
252 nmdk_clk_create(&nhk8815_clk_48
, amba_devs
[i
]->dev
.init_name
);
253 amba_device_register(amba_devs
[i
], &iomem_resource
);
257 MACHINE_START(NOMADIK
, "NHK8815")
258 /* Maintainer: ST MicroElectronics */
259 .phys_io
= NOMADIK_UART0_BASE
,
260 .io_pg_offst
= (IO_ADDRESS(NOMADIK_UART0_BASE
) >> 18) & 0xfffc,
261 .boot_params
= 0x100,
262 .map_io
= cpu8815_map_io
,
263 .init_irq
= cpu8815_init_irq
,
264 .timer
= &nomadik_timer
,
265 .init_machine
= nhk8815_platform_init
,