?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAP: DISPC: Fix to disable also interface clocks. 2nd.
[linux-ginger.git] / arch / sh / drivers / pci / pci-auto.c
blobea404704ace83b03682bd478f63f5f03f5eaac3b
1 /*
2 * PCI autoconfiguration library
3 *
4 * Author: Matt Porter <mporter@mvista.com>
5 *
6 * Copyright 2000, 2001 MontaVista Software Inc.
7 * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
8 * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16 /*
17 * Modified for MIPS by Jun Sun, jsun@mvista.com
18 *
19 * . Simplify the interface between pci_auto and the rest: a single function.
20 * . Assign resources from low address to upper address.
21 * . change most int to u32.
22 *
23 * Further modified to include it as mips generic code, ppopov@mvista.com.
24 *
25 * 2001-10-26 Bradley D. LaRonde <brad@ltc.com>
26 * - Add a top_bus argument to the "early config" functions so that
27 * they can set a fake parent bus pointer to convince the underlying
28 * pci ops to use type 1 configuration for sub busses.
29 * - Set bridge base and limit registers correctly.
30 * - Align io and memory base properly before and after bridge setup.
31 * - Don't fall through to pci_setup_bars for bridge.
32 * - Reformat the debug output to look more like lspci's output.
33 *
34 * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
35 *
36 * 2003-08-05 Paul Mundt <lethal@linux-sh.org>
37 * - Don't update the BAR values on systems that already have valid addresses
38 * and don't want these updated for whatever reason, by way of a new config
39 * option check. However, we still read in the old BAR values so that they
40 * can still be reported through the debug output.
41 */
42
43 #include <linux/kernel.h>
44 #include <linux/init.h>
45 #include <linux/types.h>
46 #include <linux/pci.h>
47
48 #define DEBUG
49 #ifdef DEBUG
50 #define DBG(x...) printk(x)
51 #else
52 #define DBG(x...)
53 #endif
54
55 /*
56 * These functions are used early on before PCI scanning is done
57 * and all of the pci_dev and pci_bus structures have been created.
58 */
59 static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
60 int top_bus, int busnr, int devfn)
61 {
62 static struct pci_dev dev;
63 static struct pci_bus bus;
64
65 dev.bus = &bus;
66 dev.sysdata = hose;
67 dev.devfn = devfn;
68 bus.number = busnr;
69 bus.ops = hose->pci_ops;
70
71 if(busnr != top_bus)
72 /* Fake a parent bus structure. */
73 bus.parent = &bus;
74 else
75 bus.parent = NULL;
76
77 return &dev;
78 }
79
80 #define EARLY_PCI_OP(rw, size, type) \
81 int early_##rw##_config_##size(struct pci_channel *hose, \
82 int top_bus, int bus, int devfn, int offset, type value) \
83 { \
84 return pci_##rw##_config_##size( \
85 fake_pci_dev(hose, top_bus, bus, devfn), \
86 offset, value); \
87 }
88
89 EARLY_PCI_OP(read, byte, u8 *)
90 EARLY_PCI_OP(read, word, u16 *)
91 EARLY_PCI_OP(read, dword, u32 *)
92 EARLY_PCI_OP(write, byte, u8)
93 EARLY_PCI_OP(write, word, u16)
94 EARLY_PCI_OP(write, dword, u32)
95
96 static struct resource *io_resource_inuse;
97 static struct resource *mem_resource_inuse;
98
99 static u32 pciauto_lower_iospc;
100 static u32 pciauto_upper_iospc;
101
102 static u32 pciauto_lower_memspc;
103 static u32 pciauto_upper_memspc;
104
105 static void __init
106 pciauto_setup_bars(struct pci_channel *hose,
107 int top_bus,
108 int current_bus,
109 int pci_devfn,
110 int bar_limit)
111 {
112 u32 bar_response, bar_size, bar_value;
113 u32 bar, addr_mask, bar_nr = 0;
114 u32 * upper_limit;
115 u32 * lower_limit;
116 int found_mem64 = 0;
117
118 for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
119 u32 bar_addr;
120
121 /* Read the old BAR value */
122 early_read_config_dword(hose, top_bus,
123 current_bus,
124 pci_devfn,
125 bar,
126 &bar_addr);
127
128 /* Tickle the BAR and get the response */
129 early_write_config_dword(hose, top_bus,
130 current_bus,
131 pci_devfn,
132 bar,
133 0xffffffff);
134
135 early_read_config_dword(hose, top_bus,
136 current_bus,
137 pci_devfn,
138 bar,
139 &bar_response);
140
141 /*
142 * Write the old BAR value back out, only update the BAR
143 * if we implicitly want resources to be updated, which
144 * is done by the generic code further down. -- PFM.
145 */
146 early_write_config_dword(hose, top_bus,
147 current_bus,
148 pci_devfn,
149 bar,
150 bar_addr);
151
152 /* If BAR is not implemented go to the next BAR */
153 if (!bar_response)
154 continue;
155
156 /*
157 * Workaround for a BAR that doesn't use its upper word,
158 * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
159 * bdl <brad@ltc.com>
160 */
161 if (!(bar_response & 0xffff0000))
162 bar_response |= 0xffff0000;
163
164 retry:
165 /* Check the BAR type and set our address mask */
166 if (bar_response & PCI_BASE_ADDRESS_SPACE) {
167 addr_mask = PCI_BASE_ADDRESS_IO_MASK;
168 upper_limit = &pciauto_upper_iospc;
169 lower_limit = &pciauto_lower_iospc;
170 DBG(" I/O");
171 } else {
172 if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
173 PCI_BASE_ADDRESS_MEM_TYPE_64)
174 found_mem64 = 1;
175
176 addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
177 upper_limit = &pciauto_upper_memspc;
178 lower_limit = &pciauto_lower_memspc;
179 DBG(" Mem");
180 }
181
182
183 /* Calculate requested size */
184 bar_size = ~(bar_response & addr_mask) + 1;
185
186 /* Allocate a base address */
187 bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
188
189 if ((bar_value + bar_size) > *upper_limit) {
190 if (bar_response & PCI_BASE_ADDRESS_SPACE) {
191 if (io_resource_inuse->child) {
192 io_resource_inuse =
193 io_resource_inuse->child;
194 pciauto_lower_iospc =
195 io_resource_inuse->start;
196 pciauto_upper_iospc =
197 io_resource_inuse->end + 1;
198 goto retry;
199 }
200
201 } else {
202 if (mem_resource_inuse->child) {
203 mem_resource_inuse =
204 mem_resource_inuse->child;
205 pciauto_lower_memspc =
206 mem_resource_inuse->start;
207 pciauto_upper_memspc =
208 mem_resource_inuse->end + 1;
209 goto retry;
210 }
211 }
212 DBG(" unavailable -- skipping, value %x size %x\n",
213 bar_value, bar_size);
214 continue;
215 }
216
217 if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
218 DBG(" unavailable -- skipping, value %x size %x\n",
219 bar_value, bar_size);
220 continue;
221 }
222
223 #ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
224 /* Write it out and update our limit */
225 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
226 bar, bar_value);
227 #endif
228
229 *lower_limit = bar_value + bar_size;
230
231 /*
232 * If we are a 64-bit decoder then increment to the
233 * upper 32 bits of the bar and force it to locate
234 * in the lower 4GB of memory.
235 */
236 if (found_mem64) {
237 bar += 4;
238 early_write_config_dword(hose, top_bus,
239 current_bus,
240 pci_devfn,
241 bar,
242 0x00000000);
243 }
244
245 DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
246
247 bar_nr++;
248 }
249
250 }
251
252 static void __init
253 pciauto_prescan_setup_bridge(struct pci_channel *hose,
254 int top_bus,
255 int current_bus,
256 int pci_devfn,
257 int sub_bus)
258 {
259 /* Configure bus number registers */
260 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
261 PCI_PRIMARY_BUS, current_bus);
262 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
263 PCI_SECONDARY_BUS, sub_bus + 1);
264 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
265 PCI_SUBORDINATE_BUS, 0xff);
266
267 /* Align memory and I/O to 1MB and 4KB boundaries. */
268 pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
269 & ~(0x100000 - 1);
270 pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
271 & ~(0x1000 - 1);
272
273 /* Set base (lower limit) of address range behind bridge. */
274 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
275 PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
276 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
277 PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
278 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
279 PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
280
281 /* We don't support prefetchable memory for now, so disable */
282 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
283 PCI_PREF_MEMORY_BASE, 0);
284 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
285 PCI_PREF_MEMORY_LIMIT, 0);
286 }
287
288 static void __init
289 pciauto_postscan_setup_bridge(struct pci_channel *hose,
290 int top_bus,
291 int current_bus,
292 int pci_devfn,
293 int sub_bus)
294 {
295 u32 temp;
296
297 /*
298 * [jsun] we always bump up baselines a little, so that if there
299 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
300 * spaces.
301 */
302 pciauto_lower_memspc += 1;
303 pciauto_lower_iospc += 1;
304
305 /* Configure bus number registers */
306 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
307 PCI_SUBORDINATE_BUS, sub_bus);
308
309 /* Set upper limit of address range behind bridge. */
310 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
311 PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
312 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
313 PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
314 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
315 PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
316
317 /* Align memory and I/O to 1MB and 4KB boundaries. */
318 pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
319 & ~(0x100000 - 1);
320 pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
321 & ~(0x1000 - 1);
322
323 /* Enable memory and I/O accesses, enable bus master */
324 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
325 PCI_COMMAND, &temp);
326 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
327 PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
328 | PCI_COMMAND_MASTER);
329 }
330
331 static void __init
332 pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
333 int top_bus,
334 int current_bus,
335 int pci_devfn,
336 int sub_bus)
337 {
338 /* Configure bus number registers */
339 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
340 PCI_PRIMARY_BUS, current_bus);
341 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
342 PCI_SECONDARY_BUS, sub_bus + 1);
343 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
344 PCI_SUBORDINATE_BUS, 0xff);
345
346 /* Align memory and I/O to 4KB and 4 byte boundaries. */
347 pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
348 & ~(0x1000 - 1);
349 pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
350 & ~(0x4 - 1);
351
352 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
353 PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
354 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
355 PCI_CB_IO_BASE_0, pciauto_lower_iospc);
356 }
357
358 static void __init
359 pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
360 int top_bus,
361 int current_bus,
362 int pci_devfn,
363 int sub_bus)
364 {
365 u32 temp;
366
367 /*
368 * [jsun] we always bump up baselines a little, so that if there
369 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
370 * spaces.
371 */
372 pciauto_lower_memspc += 1;
373 pciauto_lower_iospc += 1;
374
375 /*
376 * Configure subordinate bus number. The PCI subsystem
377 * bus scan will renumber buses (reserving three additional
378 * for this PCI<->CardBus bridge for the case where a CardBus
379 * adapter contains a P2P or CB2CB bridge.
380 */
381
382 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
383 PCI_SUBORDINATE_BUS, sub_bus);
384
385 /*
386 * Reserve an additional 4MB for mem space and 16KB for
387 * I/O space. This should cover any additional space
388 * requirement of unusual CardBus devices with
389 * additional bridges that can consume more address space.
390 *
391 * Although pcmcia-cs currently will reprogram bridge
392 * windows, the goal is to add an option to leave them
393 * alone and use the bridge window ranges as the regions
394 * that are searched for free resources upon hot-insertion
395 * of a device. This will allow a PCI<->CardBus bridge
396 * configured by this routine to happily live behind a
397 * P2P bridge in a system.
398 */
399 /* Align memory and I/O to 4KB and 4 byte boundaries. */
400 pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
401 & ~(0x1000 - 1);
402 pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
403 & ~(0x4 - 1);
404 /* Set up memory and I/O filter limits, assume 32-bit I/O space */
405 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
406 PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
407 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
408 PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
409
410 /* Enable memory and I/O accesses, enable bus master */
411 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
412 PCI_COMMAND, &temp);
413 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
414 PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
415 PCI_COMMAND_MASTER);
416 }
417
418 #define PCIAUTO_IDE_MODE_MASK 0x05
419
420 static int __init
421 pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
422 {
423 int sub_bus;
424 u32 pci_devfn, pci_class, cmdstat, found_multi=0;
425 unsigned short vid, did;
426 unsigned char header_type;
427 int devfn_start = 0;
428 int devfn_stop = 0xff;
429
430 sub_bus = current_bus;
431
432 if (hose->first_devfn)
433 devfn_start = hose->first_devfn;
434 if (hose->last_devfn)
435 devfn_stop = hose->last_devfn;
436
437 for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
438
439 if (PCI_FUNC(pci_devfn) && !found_multi)
440 continue;
441
442 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
443 PCI_VENDOR_ID, &vid);
444
445 if (vid == 0xffff) continue;
446
447 early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
448 PCI_HEADER_TYPE, &header_type);
449
450 if (!PCI_FUNC(pci_devfn))
451 found_multi = header_type & 0x80;
452
453 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
454 PCI_DEVICE_ID, &did);
455
456 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
457 PCI_CLASS_REVISION, &pci_class);
458
459 DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
460 current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
461 pci_class >> 16, vid, did);
462 if (pci_class & 0xff)
463 DBG(" (rev %.2x)", pci_class & 0xff);
464 DBG("\n");
465
466 if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
467 DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
468 current_bus, sub_bus + 1);
469 pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
470 pci_devfn, sub_bus);
471 DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
472 sub_bus + 1,
473 pciauto_lower_iospc, pciauto_lower_memspc);
474 sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
475 DBG("Back to bus %.2x\n", current_bus);
476 pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
477 pci_devfn, sub_bus);
478 continue;
479 } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
480 DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n",
481 current_bus, sub_bus + 1);
482 DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
483 /* Place CardBus Socket/ExCA registers */
484 pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
485
486 pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
487 current_bus, pci_devfn, sub_bus);
488
489 DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
490 sub_bus + 1,
491 pciauto_lower_iospc, pciauto_lower_memspc);
492 sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
493 DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
494 pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
495 current_bus, pci_devfn, sub_bus);
496 continue;
497 } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
498
499 unsigned char prg_iface;
500
501 early_read_config_byte(hose, top_bus, current_bus,
502 pci_devfn, PCI_CLASS_PROG, &prg_iface);
503 if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
504 DBG("Skipping legacy mode IDE controller\n");
505 continue;
506 }
507 }
508
509 /*
510 * Found a peripheral, enable some standard
511 * settings
512 */
513 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
514 PCI_COMMAND, &cmdstat);
515 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
516 PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
517 PCI_COMMAND_MEMORY |
518 PCI_COMMAND_MASTER);
519 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
520 PCI_LATENCY_TIMER, 0x80);
521
522 /* Allocate PCI I/O and/or memory space */
523 pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
524 }
525 return sub_bus;
526 }
527
528 int __init
529 pciauto_assign_resources(int busno, struct pci_channel *hose)
530 {
531 /* setup resource limits */
532 io_resource_inuse = hose->io_resource;
533 mem_resource_inuse = hose->mem_resource;
534
535 pciauto_lower_iospc = io_resource_inuse->start;
536 pciauto_upper_iospc = io_resource_inuse->end + 1;
537 pciauto_lower_memspc = mem_resource_inuse->start;
538 pciauto_upper_memspc = mem_resource_inuse->end + 1;
539 DBG("Autoconfig PCI channel 0x%p\n", hose);
540 DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
541 busno, pciauto_lower_iospc, pciauto_upper_iospc,
542 pciauto_lower_memspc, pciauto_upper_memspc);
543
544 return pciauto_bus_scan(hose, busno, busno);
545 }
Linux for Ginger Game Console