arch/sh/drivers/pci/pci-sh7751.c

   1 /*
   2  *      Low-Level PCI Support for the SH7751
   3  *
   4  *  Dustin McIntire (dustin@sensoria.com)
   5  *      Derived from arch/i386/kernel/pci-*.c which bore the message:
   6  *      (c) 1999--2000 Martin Mares <mj@ucw.cz>
   7  *
   8  *  Ported to the new API by Paul Mundt <lethal@linux-sh.org>
   9  *  With cleanup by Paul van Gool <pvangool@mimotech.com>
  10  *
  11  *  May be copied or modified under the terms of the GNU General Public
  12  *  License.  See linux/COPYING for more information.
  13  *
  14  */
  15 #undef DEBUG
  16
  17 #include <linux/init.h>
  18 #include <linux/pci.h>
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include "pci-sh4.h"
  23 #include <asm/addrspace.h>
  24 #include <asm/io.h>
  25
  26 /*
  27  * Initialization. Try all known PCI access methods. Note that we support
  28  * using both PCI BIOS and direct access: in such cases, we use I/O ports
  29  * to access config space.
  30  *
  31  * Note that the platform specific initialization (BSC registers, and memory
  32  * space mapping) will be called via the platform defined function
  33  * pcibios_init_platform().
  34  */
  35 static int __init sh7751_pci_init(void)
  36 {
  37         unsigned int id;
  38         int ret;
  39
  40         pr_debug("PCI: Starting intialization.\n");
  41
  42         /* check for SH7751/SH7751R hardware */
  43         id = pci_read_reg(SH7751_PCICONF0);
  44         if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
  45             id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
  46                 pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
  47                 return -ENODEV;
  48         }
  49
  50         if ((ret = sh4_pci_check_direct()) != 0)
  51                 return ret;
  52
  53         return pcibios_init_platform();
  54 }
  55 subsys_initcall(sh7751_pci_init);
  56
  57 static int __init __area_sdram_check(unsigned int area)
  58 {
  59         u32 word;
  60
  61         word = ctrl_inl(SH7751_BCR1);
  62         /* check BCR for SDRAM in area */
  63         if (((word >> area) & 1) == 0) {
  64                 printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
  65                        area, word);
  66                 return 0;
  67         }
  68         pci_write_reg(word, SH4_PCIBCR1);
  69
  70         word = (u16)ctrl_inw(SH7751_BCR2);
  71         /* check BCR2 for 32bit SDRAM interface*/
  72         if (((word >> (area << 1)) & 0x3) != 0x3) {
  73                 printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
  74                        area, word);
  75                 return 0;
  76         }
  77         pci_write_reg(word, SH4_PCIBCR2);
  78
  79         return 1;
  80 }
  81
  82 int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
  83 {
  84         u32 reg;
  85         u32 word;
  86
  87         /* Set the BCR's to enable PCI access */
  88         reg = ctrl_inl(SH7751_BCR1);
  89         reg |= 0x80000;
  90         ctrl_outl(reg, SH7751_BCR1);
  91
  92         /* Turn the clocks back on (not done in reset)*/
  93         pci_write_reg(0, SH4_PCICLKR);
  94         /* Clear Powerdown IRQ's (not done in reset) */
  95         word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
  96         pci_write_reg(word, SH4_PCIPINT);
  97
  98         /*
  99          * This code is unused for some boards as it is done in the
 100          * bootloader and doing it here means the MAC addresses loaded
 101          * by the bootloader get lost.
 102          */
 103         if (!(map->flags & SH4_PCIC_NO_RESET)) {
 104                 /* toggle PCI reset pin */
 105                 word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
 106                 pci_write_reg(word, SH4_PCICR);
 107                 /* Wait for a long time... not 1 sec. but long enough */
 108                 mdelay(100);
 109                 word = SH4_PCICR_PREFIX;
 110                 pci_write_reg(word, SH4_PCICR);
 111         }
 112
 113         /* set the command/status bits to:
 114          * Wait Cycle Control + Parity Enable + Bus Master +
 115          * Mem space enable
 116          */
 117         word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
 118                SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
 119         pci_write_reg(word, SH7751_PCICONF1);
 120
 121         /* define this host as the host bridge */
 122         word = PCI_BASE_CLASS_BRIDGE << 24;
 123         pci_write_reg(word, SH7751_PCICONF2);
 124
 125         /* Set IO and Mem windows to local address
 126          * Make PCI and local address the same for easy 1 to 1 mapping
 127          * Window0 = map->window0.size @ non-cached area base = SDRAM
 128          * Window1 = map->window1.size @ cached area base = SDRAM
 129          */
 130         word = map->window0.size - 1;
 131         pci_write_reg(word, SH4_PCILSR0);
 132         word = map->window1.size - 1;
 133         pci_write_reg(word, SH4_PCILSR1);
 134         /* Set the values on window 0 PCI config registers */
 135         word = P2SEGADDR(map->window0.base);
 136         pci_write_reg(word, SH4_PCILAR0);
 137         pci_write_reg(word, SH7751_PCICONF5);
 138         /* Set the values on window 1 PCI config registers */
 139         word =  PHYSADDR(map->window1.base);
 140         pci_write_reg(word, SH4_PCILAR1);
 141         pci_write_reg(word, SH7751_PCICONF6);
 142
 143         /* Set the local 16MB PCI memory space window to
 144          * the lowest PCI mapped address
 145          */
 146         word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
 147         pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
 148         pci_write_reg(word , SH4_PCIMBR);
 149
 150         /* Map IO space into PCI IO window
 151          * The IO window is 64K-PCIBIOS_MIN_IO in size
 152          * IO addresses will be translated to the
 153          * PCI IO window base address
 154          */
 155         pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
 156                  PCIBIOS_MIN_IO, (64 << 10),
 157                  SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
 158
 159         /* Make sure the MSB's of IO window are set to access PCI space
 160          * correctly */
 161         word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
 162         pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
 163         pci_write_reg(word, SH4_PCIIOBR);
 164
 165         /* Set PCI WCRx, BCRx's, copy from BSC locations */
 166
 167         /* check BCR for SDRAM in specified area */
 168         switch (map->window0.base) {
 169         case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break;
 170         case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break;
 171         case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break;
 172         case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break;
 173         case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break;
 174         case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
 175         case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
 176         }
 177
 178         if (!word)
 179                 return 0;
 180
 181         /* configure the wait control registers */
 182         word = ctrl_inl(SH7751_WCR1);
 183         pci_write_reg(word, SH4_PCIWCR1);
 184         word = ctrl_inl(SH7751_WCR2);
 185         pci_write_reg(word, SH4_PCIWCR2);
 186         word = ctrl_inl(SH7751_WCR3);
 187         pci_write_reg(word, SH4_PCIWCR3);
 188         word = ctrl_inl(SH7751_MCR);
 189         pci_write_reg(word, SH4_PCIMCR);
 190
 191         /* NOTE: I'm ignoring the PCI error IRQs for now..
 192          * TODO: add support for the internal error interrupts and
 193          * DMA interrupts...
 194          */
 195
 196         pci_fixup_pcic();
 197
 198         /* SH7751 init done, set central function init complete */
 199         /* use round robin mode to stop a device starving/overruning */
 200         word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
 201         pci_write_reg(word, SH4_PCICR);
 202
 203         return 1;
 204 }