2 * Low-Level PCI Access for i386 machines.
4 * (c) 1999 Martin Mares <mj@ucw.cz>
10 #define DBG(x...) printk(x)
15 #define PCI_PROBE_BIOS 0x0001
16 #define PCI_PROBE_CONF1 0x0002
17 #define PCI_PROBE_CONF2 0x0004
18 #define PCI_PROBE_MMCONF 0x0008
19 #define PCI_PROBE_MASK 0x000f
20 #define PCI_PROBE_NOEARLY 0x0010
22 #define PCI_NO_CHECKS 0x0400
23 #define PCI_USE_PIRQ_MASK 0x0800
24 #define PCI_ASSIGN_ROMS 0x1000
25 #define PCI_BIOS_IRQ_SCAN 0x2000
26 #define PCI_ASSIGN_ALL_BUSSES 0x4000
27 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000
28 #define PCI_USE__CRS 0x10000
29 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
31 extern unsigned int pci_probe
;
32 extern unsigned long pirq_table_addr
;
34 enum pci_bf_sort_state
{
41 extern void __init
dmi_check_pciprobe(void);
42 extern void __init
dmi_check_skip_isa_align(void);
46 extern unsigned int pcibios_max_latency
;
48 void pcibios_resource_survey(void);
52 extern int pcibios_last_bus
;
53 extern struct pci_bus
*pci_root_bus
;
54 extern struct pci_ops pci_root_ops
;
59 u8 bus
, devfn
; /* Bus, device and function */
61 u8 link
; /* IRQ line ID, chipset dependent, 0=not routed */
62 u16 bitmap
; /* Available IRQs */
63 } __attribute__((packed
)) irq
[4];
64 u8 slot
; /* Slot number, 0=onboard */
66 } __attribute__((packed
));
68 struct irq_routing_table
{
69 u32 signature
; /* PIRQ_SIGNATURE should be here */
70 u16 version
; /* PIRQ_VERSION */
71 u16 size
; /* Table size in bytes */
72 u8 rtr_bus
, rtr_devfn
; /* Where the interrupt router lies */
73 u16 exclusive_irqs
; /* IRQs devoted exclusively to PCI usage */
74 u16 rtr_vendor
, rtr_device
; /* Vendor and device ID of interrupt router */
75 u32 miniport_data
; /* Crap */
77 u8 checksum
; /* Modulo 256 checksum must give zero */
78 struct irq_info slots
[0];
79 } __attribute__((packed
));
81 extern unsigned int pcibios_irq_mask
;
83 extern int pcibios_scanned
;
84 extern spinlock_t pci_config_lock
;
86 extern int (*pcibios_enable_irq
)(struct pci_dev
*dev
);
87 extern void (*pcibios_disable_irq
)(struct pci_dev
*dev
);
90 int (*read
)(unsigned int domain
, unsigned int bus
, unsigned int devfn
,
91 int reg
, int len
, u32
*val
);
92 int (*write
)(unsigned int domain
, unsigned int bus
, unsigned int devfn
,
93 int reg
, int len
, u32 val
);
96 extern struct pci_raw_ops
*raw_pci_ops
;
97 extern struct pci_raw_ops
*raw_pci_ext_ops
;
99 extern struct pci_raw_ops pci_direct_conf1
;
101 extern int pci_direct_probe(void);
102 extern void pci_direct_init(int type
);
103 extern void pci_pcbios_init(void);
104 extern int pci_olpc_init(void);
108 extern int __init
pci_mmcfg_arch_init(void);
109 extern void __init
pci_mmcfg_arch_free(void);
112 * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
113 * on their northbrige except through the * %eax register. As such, you MUST
114 * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
115 * accessor functions.
116 * In fact just use pci_config_*, nothing else please.
118 static inline unsigned char mmio_config_readb(void __iomem
*pos
)
121 asm volatile("movb (%1),%%al" : "=a" (val
) : "r" (pos
));
125 static inline unsigned short mmio_config_readw(void __iomem
*pos
)
128 asm volatile("movw (%1),%%ax" : "=a" (val
) : "r" (pos
));
132 static inline unsigned int mmio_config_readl(void __iomem
*pos
)
135 asm volatile("movl (%1),%%eax" : "=a" (val
) : "r" (pos
));
139 static inline void mmio_config_writeb(void __iomem
*pos
, u8 val
)
141 asm volatile("movb %%al,(%1)" :: "a" (val
), "r" (pos
) : "memory");
144 static inline void mmio_config_writew(void __iomem
*pos
, u16 val
)
146 asm volatile("movw %%ax,(%1)" :: "a" (val
), "r" (pos
) : "memory");
149 static inline void mmio_config_writel(void __iomem
*pos
, u32 val
)
151 asm volatile("movl %%eax,(%1)" :: "a" (val
), "r" (pos
) : "memory");