OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
[linux-ginger.git] / arch / arm / mach-at91 / at91sam9263.c
blob80bfab5680e2a56ce0853398b7bed311b5b9e33b
1 /*
2 * arch/arm/mach-at91/at91sam9263.c
4 * Copyright (C) 2007 Atmel Corporation.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
14 #include <linux/pm.h>
16 #include <asm/mach/arch.h>
17 #include <asm/mach/map.h>
18 #include <mach/at91sam9263.h>
19 #include <mach/at91_pmc.h>
20 #include <mach/at91_rstc.h>
21 #include <mach/at91_shdwc.h>
23 #include "generic.h"
24 #include "clock.h"
26 static struct map_desc at91sam9263_io_desc[] __initdata = {
28 .virtual = AT91_VA_BASE_SYS,
29 .pfn = __phys_to_pfn(AT91_BASE_SYS),
30 .length = SZ_16K,
31 .type = MT_DEVICE,
32 }, {
33 .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
34 .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
35 .length = AT91SAM9263_SRAM0_SIZE,
36 .type = MT_DEVICE,
37 }, {
38 .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
39 .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
40 .length = AT91SAM9263_SRAM1_SIZE,
41 .type = MT_DEVICE,
45 /* --------------------------------------------------------------------
46 * Clocks
47 * -------------------------------------------------------------------- */
50 * The peripheral clocks.
52 static struct clk pioA_clk = {
53 .name = "pioA_clk",
54 .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
55 .type = CLK_TYPE_PERIPHERAL,
57 static struct clk pioB_clk = {
58 .name = "pioB_clk",
59 .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
60 .type = CLK_TYPE_PERIPHERAL,
62 static struct clk pioCDE_clk = {
63 .name = "pioCDE_clk",
64 .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
65 .type = CLK_TYPE_PERIPHERAL,
67 static struct clk usart0_clk = {
68 .name = "usart0_clk",
69 .pmc_mask = 1 << AT91SAM9263_ID_US0,
70 .type = CLK_TYPE_PERIPHERAL,
72 static struct clk usart1_clk = {
73 .name = "usart1_clk",
74 .pmc_mask = 1 << AT91SAM9263_ID_US1,
75 .type = CLK_TYPE_PERIPHERAL,
77 static struct clk usart2_clk = {
78 .name = "usart2_clk",
79 .pmc_mask = 1 << AT91SAM9263_ID_US2,
80 .type = CLK_TYPE_PERIPHERAL,
82 static struct clk mmc0_clk = {
83 .name = "mci0_clk",
84 .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
85 .type = CLK_TYPE_PERIPHERAL,
87 static struct clk mmc1_clk = {
88 .name = "mci1_clk",
89 .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
90 .type = CLK_TYPE_PERIPHERAL,
92 static struct clk can_clk = {
93 .name = "can_clk",
94 .pmc_mask = 1 << AT91SAM9263_ID_CAN,
95 .type = CLK_TYPE_PERIPHERAL,
97 static struct clk twi_clk = {
98 .name = "twi_clk",
99 .pmc_mask = 1 << AT91SAM9263_ID_TWI,
100 .type = CLK_TYPE_PERIPHERAL,
102 static struct clk spi0_clk = {
103 .name = "spi0_clk",
104 .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
105 .type = CLK_TYPE_PERIPHERAL,
107 static struct clk spi1_clk = {
108 .name = "spi1_clk",
109 .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
110 .type = CLK_TYPE_PERIPHERAL,
112 static struct clk ssc0_clk = {
113 .name = "ssc0_clk",
114 .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
115 .type = CLK_TYPE_PERIPHERAL,
117 static struct clk ssc1_clk = {
118 .name = "ssc1_clk",
119 .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
120 .type = CLK_TYPE_PERIPHERAL,
122 static struct clk ac97_clk = {
123 .name = "ac97_clk",
124 .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
125 .type = CLK_TYPE_PERIPHERAL,
127 static struct clk tcb_clk = {
128 .name = "tcb_clk",
129 .pmc_mask = 1 << AT91SAM9263_ID_TCB,
130 .type = CLK_TYPE_PERIPHERAL,
132 static struct clk pwmc_clk = {
133 .name = "pwmc_clk",
134 .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
135 .type = CLK_TYPE_PERIPHERAL,
137 static struct clk macb_clk = {
138 .name = "macb_clk",
139 .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
140 .type = CLK_TYPE_PERIPHERAL,
142 static struct clk dma_clk = {
143 .name = "dma_clk",
144 .pmc_mask = 1 << AT91SAM9263_ID_DMA,
145 .type = CLK_TYPE_PERIPHERAL,
147 static struct clk twodge_clk = {
148 .name = "2dge_clk",
149 .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
150 .type = CLK_TYPE_PERIPHERAL,
152 static struct clk udc_clk = {
153 .name = "udc_clk",
154 .pmc_mask = 1 << AT91SAM9263_ID_UDP,
155 .type = CLK_TYPE_PERIPHERAL,
157 static struct clk isi_clk = {
158 .name = "isi_clk",
159 .pmc_mask = 1 << AT91SAM9263_ID_ISI,
160 .type = CLK_TYPE_PERIPHERAL,
162 static struct clk lcdc_clk = {
163 .name = "lcdc_clk",
164 .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
165 .type = CLK_TYPE_PERIPHERAL,
167 static struct clk ohci_clk = {
168 .name = "ohci_clk",
169 .pmc_mask = 1 << AT91SAM9263_ID_UHP,
170 .type = CLK_TYPE_PERIPHERAL,
173 static struct clk *periph_clocks[] __initdata = {
174 &pioA_clk,
175 &pioB_clk,
176 &pioCDE_clk,
177 &usart0_clk,
178 &usart1_clk,
179 &usart2_clk,
180 &mmc0_clk,
181 &mmc1_clk,
182 &can_clk,
183 &twi_clk,
184 &spi0_clk,
185 &spi1_clk,
186 &ssc0_clk,
187 &ssc1_clk,
188 &ac97_clk,
189 &tcb_clk,
190 &pwmc_clk,
191 &macb_clk,
192 &twodge_clk,
193 &udc_clk,
194 &isi_clk,
195 &lcdc_clk,
196 &dma_clk,
197 &ohci_clk,
198 // irq0 .. irq1
202 * The four programmable clocks.
203 * You must configure pin multiplexing to bring these signals out.
205 static struct clk pck0 = {
206 .name = "pck0",
207 .pmc_mask = AT91_PMC_PCK0,
208 .type = CLK_TYPE_PROGRAMMABLE,
209 .id = 0,
211 static struct clk pck1 = {
212 .name = "pck1",
213 .pmc_mask = AT91_PMC_PCK1,
214 .type = CLK_TYPE_PROGRAMMABLE,
215 .id = 1,
217 static struct clk pck2 = {
218 .name = "pck2",
219 .pmc_mask = AT91_PMC_PCK2,
220 .type = CLK_TYPE_PROGRAMMABLE,
221 .id = 2,
223 static struct clk pck3 = {
224 .name = "pck3",
225 .pmc_mask = AT91_PMC_PCK3,
226 .type = CLK_TYPE_PROGRAMMABLE,
227 .id = 3,
230 static void __init at91sam9263_register_clocks(void)
232 int i;
234 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
235 clk_register(periph_clocks[i]);
237 clk_register(&pck0);
238 clk_register(&pck1);
239 clk_register(&pck2);
240 clk_register(&pck3);
243 /* --------------------------------------------------------------------
244 * GPIO
245 * -------------------------------------------------------------------- */
247 static struct at91_gpio_bank at91sam9263_gpio[] = {
249 .id = AT91SAM9263_ID_PIOA,
250 .offset = AT91_PIOA,
251 .clock = &pioA_clk,
252 }, {
253 .id = AT91SAM9263_ID_PIOB,
254 .offset = AT91_PIOB,
255 .clock = &pioB_clk,
256 }, {
257 .id = AT91SAM9263_ID_PIOCDE,
258 .offset = AT91_PIOC,
259 .clock = &pioCDE_clk,
260 }, {
261 .id = AT91SAM9263_ID_PIOCDE,
262 .offset = AT91_PIOD,
263 .clock = &pioCDE_clk,
264 }, {
265 .id = AT91SAM9263_ID_PIOCDE,
266 .offset = AT91_PIOE,
267 .clock = &pioCDE_clk,
271 static void at91sam9263_reset(void)
273 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
276 static void at91sam9263_poweroff(void)
278 at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
282 /* --------------------------------------------------------------------
283 * AT91SAM9263 processor initialization
284 * -------------------------------------------------------------------- */
286 void __init at91sam9263_initialize(unsigned long main_clock)
288 /* Map peripherals */
289 iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
291 at91_arch_reset = at91sam9263_reset;
292 pm_power_off = at91sam9263_poweroff;
293 at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
295 /* Init clock subsystem */
296 at91_clock_init(main_clock);
298 /* Register the processor-specific clocks */
299 at91sam9263_register_clocks();
301 /* Register GPIO subsystem */
302 at91_gpio_init(at91sam9263_gpio, 5);
305 /* --------------------------------------------------------------------
306 * Interrupt initialization
307 * -------------------------------------------------------------------- */
310 * The default interrupt priority levels (0 = lowest, 7 = highest).
312 static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
313 7, /* Advanced Interrupt Controller (FIQ) */
314 7, /* System Peripherals */
315 1, /* Parallel IO Controller A */
316 1, /* Parallel IO Controller B */
317 1, /* Parallel IO Controller C, D and E */
320 5, /* USART 0 */
321 5, /* USART 1 */
322 5, /* USART 2 */
323 0, /* Multimedia Card Interface 0 */
324 0, /* Multimedia Card Interface 1 */
325 3, /* CAN */
326 6, /* Two-Wire Interface */
327 5, /* Serial Peripheral Interface 0 */
328 5, /* Serial Peripheral Interface 1 */
329 4, /* Serial Synchronous Controller 0 */
330 4, /* Serial Synchronous Controller 1 */
331 5, /* AC97 Controller */
332 0, /* Timer Counter 0, 1 and 2 */
333 0, /* Pulse Width Modulation Controller */
334 3, /* Ethernet */
336 0, /* 2D Graphic Engine */
337 2, /* USB Device Port */
338 0, /* Image Sensor Interface */
339 3, /* LDC Controller */
340 0, /* DMA Controller */
342 2, /* USB Host port */
343 0, /* Advanced Interrupt Controller (IRQ0) */
344 0, /* Advanced Interrupt Controller (IRQ1) */
347 void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
349 if (!priority)
350 priority = at91sam9263_default_irq_priority;
352 /* Initialize the AIC interrupt controller */
353 at91_aic_init(priority);
355 /* Enable GPIO interrupts */
356 at91_gpio_irq_setup();