OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
[linux-ginger.git] / arch / arm / mach-at91 / include / mach / at91sam9261_matrix.h
blobdb62b1f18300075be68ca16fd83a212e26ad94aa
1 /*
2 * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
4 * Memory Controllers (MATRIX, EBI) - System peripherals registers.
5 * Based on AT91SAM9261 datasheet revision D.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
13 #ifndef AT91SAM9261_MATRIX_H
14 #define AT91SAM9261_MATRIX_H
16 #define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
17 #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
18 #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
20 #define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
21 #define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
22 #define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
23 #define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
24 #define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
25 #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
26 #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
27 #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
28 #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
29 #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
30 #define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
32 #define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
33 #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
34 #define AT91_MATRIX_ITCM_0 (0 << 0)
35 #define AT91_MATRIX_ITCM_16 (5 << 0)
36 #define AT91_MATRIX_ITCM_32 (6 << 0)
37 #define AT91_MATRIX_ITCM_64 (7 << 0)
38 #define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
39 #define AT91_MATRIX_DTCM_0 (0 << 4)
40 #define AT91_MATRIX_DTCM_16 (5 << 4)
41 #define AT91_MATRIX_DTCM_32 (6 << 4)
42 #define AT91_MATRIX_DTCM_64 (7 << 4)
44 #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
45 #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
46 #define AT91_MATRIX_CS1A_SMC (0 << 1)
47 #define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
48 #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
49 #define AT91_MATRIX_CS3A_SMC (0 << 3)
50 #define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
51 #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
52 #define AT91_MATRIX_CS4A_SMC (0 << 4)
53 #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
54 #define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
55 #define AT91_MATRIX_CS5A_SMC (0 << 5)
56 #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
57 #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
59 #define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
60 #define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
62 #endif