OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
[linux-ginger.git] / arch / arm / mach-versatile / pci.c
blob36f23f8965034a50ea3a4fd2de3c38c71f9fe13a
1 /*
2 * linux/arch/arm/mach-versatile/pci.c
4 * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
5 * You can redistribute and/or modify this software under the terms of version 2
6 * of the GNU General Public License as published by the Free Software Foundation.
7 * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
8 * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
9 * General Public License for more details.
10 * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
12 * ARM Versatile PCI driver.
14 * 14/04/2005 Initial version, colin.king@philips.com
17 #include <linux/kernel.h>
18 #include <linux/pci.h>
19 #include <linux/slab.h>
20 #include <linux/ioport.h>
21 #include <linux/interrupt.h>
22 #include <linux/spinlock.h>
23 #include <linux/init.h>
25 #include <mach/hardware.h>
26 #include <asm/io.h>
27 #include <asm/irq.h>
28 #include <asm/system.h>
29 #include <asm/mach/pci.h>
32 * these spaces are mapped using the following base registers:
34 * Usage Local Bus Memory Base/Map registers used
36 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch
37 * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch
38 * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO
39 * Cfg 42000000 - 42FFFFFF PCI config
42 #define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
43 #define SYS_PCICTL __IO_ADDRESS(VERSATILE_SYS_PCICTL)
44 #define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
45 #define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
46 #define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
47 #define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
48 #define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
49 #define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
50 #define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
52 #define DEVICE_ID_OFFSET 0x00
53 #define CSR_OFFSET 0x04
54 #define CLASS_ID_OFFSET 0x08
56 #define VP_PCI_DEVICE_ID 0x030010ee
57 #define VP_PCI_CLASS_ID 0x0b400000
59 static unsigned long pci_slot_ignore = 0;
61 static int __init versatile_pci_slot_ignore(char *str)
63 int retval;
64 int slot;
66 while ((retval = get_option(&str,&slot))) {
67 if ((slot < 0) || (slot > 31)) {
68 printk("Illegal slot value: %d\n",slot);
69 } else {
70 pci_slot_ignore |= (1 << slot);
73 return 1;
76 __setup("pci_slot_ignore=", versatile_pci_slot_ignore);
79 static void __iomem *__pci_addr(struct pci_bus *bus,
80 unsigned int devfn, int offset)
82 unsigned int busnr = bus->number;
85 * Trap out illegal values
87 if (offset > 255)
88 BUG();
89 if (busnr > 255)
90 BUG();
91 if (devfn > 255)
92 BUG();
94 return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
95 (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
98 static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
99 int size, u32 *val)
101 void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
102 u32 v;
103 int slot = PCI_SLOT(devfn);
105 if (pci_slot_ignore & (1 << slot)) {
106 /* Ignore this slot */
107 switch (size) {
108 case 1:
109 v = 0xff;
110 break;
111 case 2:
112 v = 0xffff;
113 break;
114 default:
115 v = 0xffffffff;
117 } else {
118 switch (size) {
119 case 1:
120 v = __raw_readl(addr);
121 if (where & 2) v >>= 16;
122 if (where & 1) v >>= 8;
123 v &= 0xff;
124 break;
126 case 2:
127 v = __raw_readl(addr);
128 if (where & 2) v >>= 16;
129 v &= 0xffff;
130 break;
132 default:
133 v = __raw_readl(addr);
134 break;
138 *val = v;
139 return PCIBIOS_SUCCESSFUL;
142 static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
143 int size, u32 val)
145 void __iomem *addr = __pci_addr(bus, devfn, where);
146 int slot = PCI_SLOT(devfn);
148 if (pci_slot_ignore & (1 << slot)) {
149 return PCIBIOS_SUCCESSFUL;
152 switch (size) {
153 case 1:
154 __raw_writeb((u8)val, addr);
155 break;
157 case 2:
158 __raw_writew((u16)val, addr);
159 break;
161 case 4:
162 __raw_writel(val, addr);
163 break;
166 return PCIBIOS_SUCCESSFUL;
169 static struct pci_ops pci_versatile_ops = {
170 .read = versatile_read_config,
171 .write = versatile_write_config,
174 static struct resource io_mem = {
175 .name = "PCI I/O space",
176 .start = VERSATILE_PCI_MEM_BASE0,
177 .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
178 .flags = IORESOURCE_IO,
181 static struct resource non_mem = {
182 .name = "PCI non-prefetchable",
183 .start = VERSATILE_PCI_MEM_BASE1,
184 .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
185 .flags = IORESOURCE_MEM,
188 static struct resource pre_mem = {
189 .name = "PCI prefetchable",
190 .start = VERSATILE_PCI_MEM_BASE2,
191 .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
192 .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
195 static int __init pci_versatile_setup_resources(struct resource **resource)
197 int ret = 0;
199 ret = request_resource(&iomem_resource, &io_mem);
200 if (ret) {
201 printk(KERN_ERR "PCI: unable to allocate I/O "
202 "memory region (%d)\n", ret);
203 goto out;
205 ret = request_resource(&iomem_resource, &non_mem);
206 if (ret) {
207 printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
208 "memory region (%d)\n", ret);
209 goto release_io_mem;
211 ret = request_resource(&iomem_resource, &pre_mem);
212 if (ret) {
213 printk(KERN_ERR "PCI: unable to allocate prefetchable "
214 "memory region (%d)\n", ret);
215 goto release_non_mem;
219 * bus->resource[0] is the IO resource for this bus
220 * bus->resource[1] is the mem resource for this bus
221 * bus->resource[2] is the prefetch mem resource for this bus
223 resource[0] = &io_mem;
224 resource[1] = &non_mem;
225 resource[2] = &pre_mem;
227 goto out;
229 release_non_mem:
230 release_resource(&non_mem);
231 release_io_mem:
232 release_resource(&io_mem);
233 out:
234 return ret;
237 int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
239 int ret = 0;
240 int i;
241 int myslot = -1;
242 unsigned long val;
243 void __iomem *local_pci_cfg_base;
245 val = __raw_readl(SYS_PCICTL);
246 if (!(val & 1)) {
247 printk("Not plugged into PCI backplane!\n");
248 ret = -EIO;
249 goto out;
252 if (nr == 0) {
253 sys->mem_offset = 0;
254 ret = pci_versatile_setup_resources(sys->resource);
255 if (ret < 0) {
256 printk("pci_versatile_setup: resources... oops?\n");
257 goto out;
259 } else {
260 printk("pci_versatile_setup: resources... nr == 0??\n");
261 goto out;
265 * We need to discover the PCI core first to configure itself
266 * before the main PCI probing is performed
268 for (i=0; i<32; i++)
269 if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
270 (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
271 myslot = i;
272 break;
275 if (myslot == -1) {
276 printk("Cannot find PCI core!\n");
277 ret = -EIO;
278 goto out;
281 printk("PCI core found (slot %d)\n",myslot);
283 __raw_writel(myslot, PCI_SELFID);
284 local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
286 val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
287 val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
288 __raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
291 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
293 __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
294 __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
295 __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
298 * Do not to map Versatile FPGA PCI device into memory space
300 pci_slot_ignore |= (1 << myslot);
301 ret = 1;
303 out:
304 return ret;
308 struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
310 return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
313 void __init pci_versatile_preinit(void)
315 __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
316 __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
317 __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
319 __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
320 __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
321 __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
323 __raw_writel(1, SYS_PCICTL);
327 * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this.
329 static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
331 int irq;
332 int devslot = PCI_SLOT(dev->devfn);
334 /* slot, pin, irq
335 * 24 1 27
336 * 25 1 28
337 * 26 1 29
338 * 27 1 30
340 irq = 27 + ((slot + pin - 1) & 3);
342 printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
344 return irq;
347 static struct hw_pci versatile_pci __initdata = {
348 .swizzle = NULL,
349 .map_irq = versatile_map_irq,
350 .nr_controllers = 1,
351 .setup = pci_versatile_setup,
352 .scan = pci_versatile_scan_bus,
353 .preinit = pci_versatile_preinit,
356 static int __init versatile_pci_init(void)
358 pci_common_init(&versatile_pci);
359 return 0;
362 subsys_initcall(versatile_pci_init);