ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code
[linux-ginger.git] / drivers / net / ppp_async.c
blobf1a52def1241a387c28ed6f5a045b839df8f994f
1 /*
2 * PPP async serial channel driver for Linux.
4 * Copyright 1999 Paul Mackerras.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * This driver provides the encapsulation and framing for sending
12 * and receiving PPP frames over async serial lines. It relies on
13 * the generic PPP layer to give it frames to send and to process
14 * received frames. It implements the PPP line discipline.
16 * Part of the code in this driver was inspired by the old async-only
17 * PPP driver, written by Michael Callahan and Al Longyear, and
18 * subsequently hacked by Paul Mackerras.
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/skbuff.h>
24 #include <linux/tty.h>
25 #include <linux/netdevice.h>
26 #include <linux/poll.h>
27 #include <linux/crc-ccitt.h>
28 #include <linux/ppp_defs.h>
29 #include <linux/if_ppp.h>
30 #include <linux/ppp_channel.h>
31 #include <linux/spinlock.h>
32 #include <linux/init.h>
33 #include <linux/jiffies.h>
34 #include <asm/uaccess.h>
35 #include <asm/string.h>
37 #define PPP_VERSION "2.4.2"
39 #define OBUFSIZE 256
41 /* Structure for storing local state. */
42 struct asyncppp {
43 struct tty_struct *tty;
44 unsigned int flags;
45 unsigned int state;
46 unsigned int rbits;
47 int mru;
48 spinlock_t xmit_lock;
49 spinlock_t recv_lock;
50 unsigned long xmit_flags;
51 u32 xaccm[8];
52 u32 raccm;
53 unsigned int bytes_sent;
54 unsigned int bytes_rcvd;
56 struct sk_buff *tpkt;
57 int tpkt_pos;
58 u16 tfcs;
59 unsigned char *optr;
60 unsigned char *olim;
61 unsigned long last_xmit;
63 struct sk_buff *rpkt;
64 int lcp_fcs;
65 struct sk_buff_head rqueue;
67 struct tasklet_struct tsk;
69 atomic_t refcnt;
70 struct semaphore dead_sem;
71 struct ppp_channel chan; /* interface to generic ppp layer */
72 unsigned char obuf[OBUFSIZE];
75 /* Bit numbers in xmit_flags */
76 #define XMIT_WAKEUP 0
77 #define XMIT_FULL 1
78 #define XMIT_BUSY 2
80 /* State bits */
81 #define SC_TOSS 1
82 #define SC_ESCAPE 2
83 #define SC_PREV_ERROR 4
85 /* Bits in rbits */
86 #define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
88 static int flag_time = HZ;
89 module_param(flag_time, int, 0);
90 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
91 MODULE_LICENSE("GPL");
92 MODULE_ALIAS_LDISC(N_PPP);
95 * Prototypes.
97 static int ppp_async_encode(struct asyncppp *ap);
98 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
99 static int ppp_async_push(struct asyncppp *ap);
100 static void ppp_async_flush_output(struct asyncppp *ap);
101 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
102 char *flags, int count);
103 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
104 unsigned long arg);
105 static void ppp_async_process(unsigned long arg);
107 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
108 int len, int inbound);
110 static struct ppp_channel_ops async_ops = {
111 ppp_async_send,
112 ppp_async_ioctl
116 * Routines implementing the PPP line discipline.
120 * We have a potential race on dereferencing tty->disc_data,
121 * because the tty layer provides no locking at all - thus one
122 * cpu could be running ppp_asynctty_receive while another
123 * calls ppp_asynctty_close, which zeroes tty->disc_data and
124 * frees the memory that ppp_asynctty_receive is using. The best
125 * way to fix this is to use a rwlock in the tty struct, but for now
126 * we use a single global rwlock for all ttys in ppp line discipline.
128 * FIXME: this is no longer true. The _close path for the ldisc is
129 * now guaranteed to be sane.
131 static DEFINE_RWLOCK(disc_data_lock);
133 static struct asyncppp *ap_get(struct tty_struct *tty)
135 struct asyncppp *ap;
137 read_lock(&disc_data_lock);
138 ap = tty->disc_data;
139 if (ap != NULL)
140 atomic_inc(&ap->refcnt);
141 read_unlock(&disc_data_lock);
142 return ap;
145 static void ap_put(struct asyncppp *ap)
147 if (atomic_dec_and_test(&ap->refcnt))
148 up(&ap->dead_sem);
152 * Called when a tty is put into PPP line discipline. Called in process
153 * context.
155 static int
156 ppp_asynctty_open(struct tty_struct *tty)
158 struct asyncppp *ap;
159 int err;
161 if (tty->ops->write == NULL)
162 return -EOPNOTSUPP;
164 err = -ENOMEM;
165 ap = kzalloc(sizeof(*ap), GFP_KERNEL);
166 if (!ap)
167 goto out;
169 /* initialize the asyncppp structure */
170 ap->tty = tty;
171 ap->mru = PPP_MRU;
172 spin_lock_init(&ap->xmit_lock);
173 spin_lock_init(&ap->recv_lock);
174 ap->xaccm[0] = ~0U;
175 ap->xaccm[3] = 0x60000000U;
176 ap->raccm = ~0U;
177 ap->optr = ap->obuf;
178 ap->olim = ap->obuf;
179 ap->lcp_fcs = -1;
181 skb_queue_head_init(&ap->rqueue);
182 tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap);
184 atomic_set(&ap->refcnt, 1);
185 init_MUTEX_LOCKED(&ap->dead_sem);
187 ap->chan.private = ap;
188 ap->chan.ops = &async_ops;
189 ap->chan.mtu = PPP_MRU;
190 err = ppp_register_channel(&ap->chan);
191 if (err)
192 goto out_free;
194 tty->disc_data = ap;
195 tty->receive_room = 65536;
196 return 0;
198 out_free:
199 kfree(ap);
200 out:
201 return err;
205 * Called when the tty is put into another line discipline
206 * or it hangs up. We have to wait for any cpu currently
207 * executing in any of the other ppp_asynctty_* routines to
208 * finish before we can call ppp_unregister_channel and free
209 * the asyncppp struct. This routine must be called from
210 * process context, not interrupt or softirq context.
212 static void
213 ppp_asynctty_close(struct tty_struct *tty)
215 struct asyncppp *ap;
217 write_lock_irq(&disc_data_lock);
218 ap = tty->disc_data;
219 tty->disc_data = NULL;
220 write_unlock_irq(&disc_data_lock);
221 if (!ap)
222 return;
225 * We have now ensured that nobody can start using ap from now
226 * on, but we have to wait for all existing users to finish.
227 * Note that ppp_unregister_channel ensures that no calls to
228 * our channel ops (i.e. ppp_async_send/ioctl) are in progress
229 * by the time it returns.
231 if (!atomic_dec_and_test(&ap->refcnt))
232 down(&ap->dead_sem);
233 tasklet_kill(&ap->tsk);
235 ppp_unregister_channel(&ap->chan);
236 if (ap->rpkt)
237 kfree_skb(ap->rpkt);
238 skb_queue_purge(&ap->rqueue);
239 if (ap->tpkt)
240 kfree_skb(ap->tpkt);
241 kfree(ap);
245 * Called on tty hangup in process context.
247 * Wait for I/O to driver to complete and unregister PPP channel.
248 * This is already done by the close routine, so just call that.
250 static int ppp_asynctty_hangup(struct tty_struct *tty)
252 ppp_asynctty_close(tty);
253 return 0;
257 * Read does nothing - no data is ever available this way.
258 * Pppd reads and writes packets via /dev/ppp instead.
260 static ssize_t
261 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
262 unsigned char __user *buf, size_t count)
264 return -EAGAIN;
268 * Write on the tty does nothing, the packets all come in
269 * from the ppp generic stuff.
271 static ssize_t
272 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
273 const unsigned char *buf, size_t count)
275 return -EAGAIN;
279 * Called in process context only. May be re-entered by multiple
280 * ioctl calling threads.
283 static int
284 ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
285 unsigned int cmd, unsigned long arg)
287 struct asyncppp *ap = ap_get(tty);
288 int err, val;
289 int __user *p = (int __user *)arg;
291 if (!ap)
292 return -ENXIO;
293 err = -EFAULT;
294 switch (cmd) {
295 case PPPIOCGCHAN:
296 err = -ENXIO;
297 if (!ap)
298 break;
299 err = -EFAULT;
300 if (put_user(ppp_channel_index(&ap->chan), p))
301 break;
302 err = 0;
303 break;
305 case PPPIOCGUNIT:
306 err = -ENXIO;
307 if (!ap)
308 break;
309 err = -EFAULT;
310 if (put_user(ppp_unit_number(&ap->chan), p))
311 break;
312 err = 0;
313 break;
315 case TCFLSH:
316 /* flush our buffers and the serial port's buffer */
317 if (arg == TCIOFLUSH || arg == TCOFLUSH)
318 ppp_async_flush_output(ap);
319 err = tty_perform_flush(tty, arg);
320 break;
322 case FIONREAD:
323 val = 0;
324 if (put_user(val, p))
325 break;
326 err = 0;
327 break;
329 default:
330 /* Try the various mode ioctls */
331 err = tty_mode_ioctl(tty, file, cmd, arg);
334 ap_put(ap);
335 return err;
338 /* No kernel lock - fine */
339 static unsigned int
340 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
342 return 0;
346 * This can now be called from hard interrupt level as well
347 * as soft interrupt level or mainline.
349 static void
350 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
351 char *cflags, int count)
353 struct asyncppp *ap = ap_get(tty);
354 unsigned long flags;
356 if (!ap)
357 return;
358 spin_lock_irqsave(&ap->recv_lock, flags);
359 ppp_async_input(ap, buf, cflags, count);
360 spin_unlock_irqrestore(&ap->recv_lock, flags);
361 if (!skb_queue_empty(&ap->rqueue))
362 tasklet_schedule(&ap->tsk);
363 ap_put(ap);
364 tty_unthrottle(tty);
367 static void
368 ppp_asynctty_wakeup(struct tty_struct *tty)
370 struct asyncppp *ap = ap_get(tty);
372 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
373 if (!ap)
374 return;
375 set_bit(XMIT_WAKEUP, &ap->xmit_flags);
376 tasklet_schedule(&ap->tsk);
377 ap_put(ap);
381 static struct tty_ldisc ppp_ldisc = {
382 .owner = THIS_MODULE,
383 .magic = TTY_LDISC_MAGIC,
384 .name = "ppp",
385 .open = ppp_asynctty_open,
386 .close = ppp_asynctty_close,
387 .hangup = ppp_asynctty_hangup,
388 .read = ppp_asynctty_read,
389 .write = ppp_asynctty_write,
390 .ioctl = ppp_asynctty_ioctl,
391 .poll = ppp_asynctty_poll,
392 .receive_buf = ppp_asynctty_receive,
393 .write_wakeup = ppp_asynctty_wakeup,
396 static int __init
397 ppp_async_init(void)
399 int err;
401 err = tty_register_ldisc(N_PPP, &ppp_ldisc);
402 if (err != 0)
403 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
404 err);
405 return err;
409 * The following routines provide the PPP channel interface.
411 static int
412 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
414 struct asyncppp *ap = chan->private;
415 void __user *argp = (void __user *)arg;
416 int __user *p = argp;
417 int err, val;
418 u32 accm[8];
420 err = -EFAULT;
421 switch (cmd) {
422 case PPPIOCGFLAGS:
423 val = ap->flags | ap->rbits;
424 if (put_user(val, p))
425 break;
426 err = 0;
427 break;
428 case PPPIOCSFLAGS:
429 if (get_user(val, p))
430 break;
431 ap->flags = val & ~SC_RCV_BITS;
432 spin_lock_irq(&ap->recv_lock);
433 ap->rbits = val & SC_RCV_BITS;
434 spin_unlock_irq(&ap->recv_lock);
435 err = 0;
436 break;
438 case PPPIOCGASYNCMAP:
439 if (put_user(ap->xaccm[0], (u32 __user *)argp))
440 break;
441 err = 0;
442 break;
443 case PPPIOCSASYNCMAP:
444 if (get_user(ap->xaccm[0], (u32 __user *)argp))
445 break;
446 err = 0;
447 break;
449 case PPPIOCGRASYNCMAP:
450 if (put_user(ap->raccm, (u32 __user *)argp))
451 break;
452 err = 0;
453 break;
454 case PPPIOCSRASYNCMAP:
455 if (get_user(ap->raccm, (u32 __user *)argp))
456 break;
457 err = 0;
458 break;
460 case PPPIOCGXASYNCMAP:
461 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
462 break;
463 err = 0;
464 break;
465 case PPPIOCSXASYNCMAP:
466 if (copy_from_user(accm, argp, sizeof(accm)))
467 break;
468 accm[2] &= ~0x40000000U; /* can't escape 0x5e */
469 accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */
470 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
471 err = 0;
472 break;
474 case PPPIOCGMRU:
475 if (put_user(ap->mru, p))
476 break;
477 err = 0;
478 break;
479 case PPPIOCSMRU:
480 if (get_user(val, p))
481 break;
482 if (val < PPP_MRU)
483 val = PPP_MRU;
484 ap->mru = val;
485 err = 0;
486 break;
488 default:
489 err = -ENOTTY;
492 return err;
496 * This is called at softirq level to deliver received packets
497 * to the ppp_generic code, and to tell the ppp_generic code
498 * if we can accept more output now.
500 static void ppp_async_process(unsigned long arg)
502 struct asyncppp *ap = (struct asyncppp *) arg;
503 struct sk_buff *skb;
505 /* process received packets */
506 while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
507 if (skb->cb[0])
508 ppp_input_error(&ap->chan, 0);
509 ppp_input(&ap->chan, skb);
512 /* try to push more stuff out */
513 if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
514 ppp_output_wakeup(&ap->chan);
518 * Procedures for encapsulation and framing.
522 * Procedure to encode the data for async serial transmission.
523 * Does octet stuffing (escaping), puts the address/control bytes
524 * on if A/C compression is disabled, and does protocol compression.
525 * Assumes ap->tpkt != 0 on entry.
526 * Returns 1 if we finished the current frame, 0 otherwise.
529 #define PUT_BYTE(ap, buf, c, islcp) do { \
530 if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
531 *buf++ = PPP_ESCAPE; \
532 *buf++ = c ^ 0x20; \
533 } else \
534 *buf++ = c; \
535 } while (0)
537 static int
538 ppp_async_encode(struct asyncppp *ap)
540 int fcs, i, count, c, proto;
541 unsigned char *buf, *buflim;
542 unsigned char *data;
543 int islcp;
545 buf = ap->obuf;
546 ap->olim = buf;
547 ap->optr = buf;
548 i = ap->tpkt_pos;
549 data = ap->tpkt->data;
550 count = ap->tpkt->len;
551 fcs = ap->tfcs;
552 proto = (data[0] << 8) + data[1];
555 * LCP packets with code values between 1 (configure-reqest)
556 * and 7 (code-reject) must be sent as though no options
557 * had been negotiated.
559 islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
561 if (i == 0) {
562 if (islcp)
563 async_lcp_peek(ap, data, count, 0);
566 * Start of a new packet - insert the leading FLAG
567 * character if necessary.
569 if (islcp || flag_time == 0
570 || time_after_eq(jiffies, ap->last_xmit + flag_time))
571 *buf++ = PPP_FLAG;
572 ap->last_xmit = jiffies;
573 fcs = PPP_INITFCS;
576 * Put in the address/control bytes if necessary
578 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
579 PUT_BYTE(ap, buf, 0xff, islcp);
580 fcs = PPP_FCS(fcs, 0xff);
581 PUT_BYTE(ap, buf, 0x03, islcp);
582 fcs = PPP_FCS(fcs, 0x03);
587 * Once we put in the last byte, we need to put in the FCS
588 * and closing flag, so make sure there is at least 7 bytes
589 * of free space in the output buffer.
591 buflim = ap->obuf + OBUFSIZE - 6;
592 while (i < count && buf < buflim) {
593 c = data[i++];
594 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
595 continue; /* compress protocol field */
596 fcs = PPP_FCS(fcs, c);
597 PUT_BYTE(ap, buf, c, islcp);
600 if (i < count) {
602 * Remember where we are up to in this packet.
604 ap->olim = buf;
605 ap->tpkt_pos = i;
606 ap->tfcs = fcs;
607 return 0;
611 * We have finished the packet. Add the FCS and flag.
613 fcs = ~fcs;
614 c = fcs & 0xff;
615 PUT_BYTE(ap, buf, c, islcp);
616 c = (fcs >> 8) & 0xff;
617 PUT_BYTE(ap, buf, c, islcp);
618 *buf++ = PPP_FLAG;
619 ap->olim = buf;
621 kfree_skb(ap->tpkt);
622 ap->tpkt = NULL;
623 return 1;
627 * Transmit-side routines.
631 * Send a packet to the peer over an async tty line.
632 * Returns 1 iff the packet was accepted.
633 * If the packet was not accepted, we will call ppp_output_wakeup
634 * at some later time.
636 static int
637 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
639 struct asyncppp *ap = chan->private;
641 ppp_async_push(ap);
643 if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
644 return 0; /* already full */
645 ap->tpkt = skb;
646 ap->tpkt_pos = 0;
648 ppp_async_push(ap);
649 return 1;
653 * Push as much data as possible out to the tty.
655 static int
656 ppp_async_push(struct asyncppp *ap)
658 int avail, sent, done = 0;
659 struct tty_struct *tty = ap->tty;
660 int tty_stuffed = 0;
663 * We can get called recursively here if the tty write
664 * function calls our wakeup function. This can happen
665 * for example on a pty with both the master and slave
666 * set to PPP line discipline.
667 * We use the XMIT_BUSY bit to detect this and get out,
668 * leaving the XMIT_WAKEUP bit set to tell the other
669 * instance that it may now be able to write more now.
671 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
672 return 0;
673 spin_lock_bh(&ap->xmit_lock);
674 for (;;) {
675 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
676 tty_stuffed = 0;
677 if (!tty_stuffed && ap->optr < ap->olim) {
678 avail = ap->olim - ap->optr;
679 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
680 sent = tty->ops->write(tty, ap->optr, avail);
681 if (sent < 0)
682 goto flush; /* error, e.g. loss of CD */
683 ap->optr += sent;
684 if (sent < avail)
685 tty_stuffed = 1;
686 continue;
688 if (ap->optr >= ap->olim && ap->tpkt) {
689 if (ppp_async_encode(ap)) {
690 /* finished processing ap->tpkt */
691 clear_bit(XMIT_FULL, &ap->xmit_flags);
692 done = 1;
694 continue;
697 * We haven't made any progress this time around.
698 * Clear XMIT_BUSY to let other callers in, but
699 * after doing so we have to check if anyone set
700 * XMIT_WAKEUP since we last checked it. If they
701 * did, we should try again to set XMIT_BUSY and go
702 * around again in case XMIT_BUSY was still set when
703 * the other caller tried.
705 clear_bit(XMIT_BUSY, &ap->xmit_flags);
706 /* any more work to do? if not, exit the loop */
707 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
708 || (!tty_stuffed && ap->tpkt)))
709 break;
710 /* more work to do, see if we can do it now */
711 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
712 break;
714 spin_unlock_bh(&ap->xmit_lock);
715 return done;
717 flush:
718 clear_bit(XMIT_BUSY, &ap->xmit_flags);
719 if (ap->tpkt) {
720 kfree_skb(ap->tpkt);
721 ap->tpkt = NULL;
722 clear_bit(XMIT_FULL, &ap->xmit_flags);
723 done = 1;
725 ap->optr = ap->olim;
726 spin_unlock_bh(&ap->xmit_lock);
727 return done;
731 * Flush output from our internal buffers.
732 * Called for the TCFLSH ioctl. Can be entered in parallel
733 * but this is covered by the xmit_lock.
735 static void
736 ppp_async_flush_output(struct asyncppp *ap)
738 int done = 0;
740 spin_lock_bh(&ap->xmit_lock);
741 ap->optr = ap->olim;
742 if (ap->tpkt != NULL) {
743 kfree_skb(ap->tpkt);
744 ap->tpkt = NULL;
745 clear_bit(XMIT_FULL, &ap->xmit_flags);
746 done = 1;
748 spin_unlock_bh(&ap->xmit_lock);
749 if (done)
750 ppp_output_wakeup(&ap->chan);
754 * Receive-side routines.
757 /* see how many ordinary chars there are at the start of buf */
758 static inline int
759 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
761 int i, c;
763 for (i = 0; i < count; ++i) {
764 c = buf[i];
765 if (c == PPP_ESCAPE || c == PPP_FLAG
766 || (c < 0x20 && (ap->raccm & (1 << c)) != 0))
767 break;
769 return i;
772 /* called when a flag is seen - do end-of-packet processing */
773 static void
774 process_input_packet(struct asyncppp *ap)
776 struct sk_buff *skb;
777 unsigned char *p;
778 unsigned int len, fcs, proto;
780 skb = ap->rpkt;
781 if (ap->state & (SC_TOSS | SC_ESCAPE))
782 goto err;
784 if (skb == NULL)
785 return; /* 0-length packet */
787 /* check the FCS */
788 p = skb->data;
789 len = skb->len;
790 if (len < 3)
791 goto err; /* too short */
792 fcs = PPP_INITFCS;
793 for (; len > 0; --len)
794 fcs = PPP_FCS(fcs, *p++);
795 if (fcs != PPP_GOODFCS)
796 goto err; /* bad FCS */
797 skb_trim(skb, skb->len - 2);
799 /* check for address/control and protocol compression */
800 p = skb->data;
801 if (p[0] == PPP_ALLSTATIONS) {
802 /* chop off address/control */
803 if (p[1] != PPP_UI || skb->len < 3)
804 goto err;
805 p = skb_pull(skb, 2);
807 proto = p[0];
808 if (proto & 1) {
809 /* protocol is compressed */
810 skb_push(skb, 1)[0] = 0;
811 } else {
812 if (skb->len < 2)
813 goto err;
814 proto = (proto << 8) + p[1];
815 if (proto == PPP_LCP)
816 async_lcp_peek(ap, p, skb->len, 1);
819 /* queue the frame to be processed */
820 skb->cb[0] = ap->state;
821 skb_queue_tail(&ap->rqueue, skb);
822 ap->rpkt = NULL;
823 ap->state = 0;
824 return;
826 err:
827 /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
828 ap->state = SC_PREV_ERROR;
829 if (skb) {
830 /* make skb appear as freshly allocated */
831 skb_trim(skb, 0);
832 skb_reserve(skb, - skb_headroom(skb));
836 /* Called when the tty driver has data for us. Runs parallel with the
837 other ldisc functions but will not be re-entered */
839 static void
840 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
841 char *flags, int count)
843 struct sk_buff *skb;
844 int c, i, j, n, s, f;
845 unsigned char *sp;
847 /* update bits used for 8-bit cleanness detection */
848 if (~ap->rbits & SC_RCV_BITS) {
849 s = 0;
850 for (i = 0; i < count; ++i) {
851 c = buf[i];
852 if (flags && flags[i] != 0)
853 continue;
854 s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
855 c = ((c >> 4) ^ c) & 0xf;
856 s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
858 ap->rbits |= s;
861 while (count > 0) {
862 /* scan through and see how many chars we can do in bulk */
863 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
864 n = 1;
865 else
866 n = scan_ordinary(ap, buf, count);
868 f = 0;
869 if (flags && (ap->state & SC_TOSS) == 0) {
870 /* check the flags to see if any char had an error */
871 for (j = 0; j < n; ++j)
872 if ((f = flags[j]) != 0)
873 break;
875 if (f != 0) {
876 /* start tossing */
877 ap->state |= SC_TOSS;
879 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
880 /* stuff the chars in the skb */
881 skb = ap->rpkt;
882 if (!skb) {
883 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
884 if (!skb)
885 goto nomem;
886 ap->rpkt = skb;
888 if (skb->len == 0) {
889 /* Try to get the payload 4-byte aligned.
890 * This should match the
891 * PPP_ALLSTATIONS/PPP_UI/compressed tests in
892 * process_input_packet, but we do not have
893 * enough chars here to test buf[1] and buf[2].
895 if (buf[0] != PPP_ALLSTATIONS)
896 skb_reserve(skb, 2 + (buf[0] & 1));
898 if (n > skb_tailroom(skb)) {
899 /* packet overflowed MRU */
900 ap->state |= SC_TOSS;
901 } else {
902 sp = skb_put(skb, n);
903 memcpy(sp, buf, n);
904 if (ap->state & SC_ESCAPE) {
905 sp[0] ^= 0x20;
906 ap->state &= ~SC_ESCAPE;
911 if (n >= count)
912 break;
914 c = buf[n];
915 if (flags != NULL && flags[n] != 0) {
916 ap->state |= SC_TOSS;
917 } else if (c == PPP_FLAG) {
918 process_input_packet(ap);
919 } else if (c == PPP_ESCAPE) {
920 ap->state |= SC_ESCAPE;
921 } else if (I_IXON(ap->tty)) {
922 if (c == START_CHAR(ap->tty))
923 start_tty(ap->tty);
924 else if (c == STOP_CHAR(ap->tty))
925 stop_tty(ap->tty);
927 /* otherwise it's a char in the recv ACCM */
928 ++n;
930 buf += n;
931 if (flags)
932 flags += n;
933 count -= n;
935 return;
937 nomem:
938 printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
939 ap->state |= SC_TOSS;
943 * We look at LCP frames going past so that we can notice
944 * and react to the LCP configure-ack from the peer.
945 * In the situation where the peer has been sent a configure-ack
946 * already, LCP is up once it has sent its configure-ack
947 * so the immediately following packet can be sent with the
948 * configured LCP options. This allows us to process the following
949 * packet correctly without pppd needing to respond quickly.
951 * We only respond to the received configure-ack if we have just
952 * sent a configure-request, and the configure-ack contains the
953 * same data (this is checked using a 16-bit crc of the data).
955 #define CONFREQ 1 /* LCP code field values */
956 #define CONFACK 2
957 #define LCP_MRU 1 /* LCP option numbers */
958 #define LCP_ASYNCMAP 2
960 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
961 int len, int inbound)
963 int dlen, fcs, i, code;
964 u32 val;
966 data += 2; /* skip protocol bytes */
967 len -= 2;
968 if (len < 4) /* 4 = code, ID, length */
969 return;
970 code = data[0];
971 if (code != CONFACK && code != CONFREQ)
972 return;
973 dlen = (data[2] << 8) + data[3];
974 if (len < dlen)
975 return; /* packet got truncated or length is bogus */
977 if (code == (inbound? CONFACK: CONFREQ)) {
979 * sent confreq or received confack:
980 * calculate the crc of the data from the ID field on.
982 fcs = PPP_INITFCS;
983 for (i = 1; i < dlen; ++i)
984 fcs = PPP_FCS(fcs, data[i]);
986 if (!inbound) {
987 /* outbound confreq - remember the crc for later */
988 ap->lcp_fcs = fcs;
989 return;
992 /* received confack, check the crc */
993 fcs ^= ap->lcp_fcs;
994 ap->lcp_fcs = -1;
995 if (fcs != 0)
996 return;
997 } else if (inbound)
998 return; /* not interested in received confreq */
1000 /* process the options in the confack */
1001 data += 4;
1002 dlen -= 4;
1003 /* data[0] is code, data[1] is length */
1004 while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
1005 switch (data[0]) {
1006 case LCP_MRU:
1007 val = (data[2] << 8) + data[3];
1008 if (inbound)
1009 ap->mru = val;
1010 else
1011 ap->chan.mtu = val;
1012 break;
1013 case LCP_ASYNCMAP:
1014 val = (data[2] << 24) + (data[3] << 16)
1015 + (data[4] << 8) + data[5];
1016 if (inbound)
1017 ap->raccm = val;
1018 else
1019 ap->xaccm[0] = val;
1020 break;
1022 dlen -= data[1];
1023 data += data[1];
1027 static void __exit ppp_async_cleanup(void)
1029 if (tty_unregister_ldisc(N_PPP) != 0)
1030 printk(KERN_ERR "failed to unregister PPP line discipline\n");
1033 module_init(ppp_async_init);
1034 module_exit(ppp_async_cleanup);