2 * Driver for the SWIM3 (Super Woz Integrated Machine 3)
3 * floppy controller found on Power Macintoshes.
5 * Copyright (C) 1996 Paul Mackerras.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
19 #include <linux/stddef.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/timer.h>
23 #include <linux/delay.h>
25 #include <linux/ioctl.h>
26 #include <linux/blkdev.h>
27 #include <linux/interrupt.h>
28 #include <linux/smp_lock.h>
29 #include <linux/module.h>
30 #include <linux/spinlock.h>
32 #include <asm/dbdma.h>
34 #include <asm/uaccess.h>
35 #include <asm/mediabay.h>
36 #include <asm/machdep.h>
37 #include <asm/pmac_feature.h>
39 static struct request_queue
*swim3_queue
;
40 static struct gendisk
*disks
[2];
41 static struct request
*fd_req
;
43 #define MAX_FLOPPIES 2
57 #define REG(x) unsigned char x; char x ## _pad[15];
60 * The names for these registers mostly represent speculation on my part.
61 * It will be interesting to see how close they are to the names Apple uses.
65 REG(timer
); /* counts down at 1MHz */
68 REG(select
); /* controls CA0, CA1, CA2 and LSTRB signals */
70 REG(control
); /* writing bits clears them */
71 REG(status
); /* writing bits sets them in control */
73 REG(nseek
); /* # tracks to seek */
74 REG(ctrack
); /* current track number */
75 REG(csect
); /* current sector number */
76 REG(gap3
); /* size of gap 3 in track format */
77 REG(sector
); /* sector # to read or write */
78 REG(nsect
); /* # sectors to read or write */
82 #define control_bic control
83 #define control_bis status
85 /* Bits in select register */
89 /* Bits in control register */
93 #define WRITE_SECTORS 0x10
94 #define DO_ACTION 0x08
95 #define DRIVE2_ENABLE 0x04
96 #define DRIVE_ENABLE 0x02
97 #define INTR_ENABLE 0x01
99 /* Bits in status register */
100 #define FIFO_1BYTE 0x80
101 #define FIFO_2BYTE 0x40
105 #define INTR_PENDING 0x02
106 #define MARK_BYTE 0x01
108 /* Bits in intr and intr_enable registers */
109 #define ERROR_INTR 0x20
110 #define DATA_CHANGED 0x10
111 #define TRANSFER_DONE 0x08
112 #define SEEN_SECTOR 0x04
113 #define SEEK_DONE 0x02
114 #define TIMER_DONE 0x01
116 /* Bits in error register */
117 #define ERR_DATA_CRC 0x80
118 #define ERR_ADDR_CRC 0x40
119 #define ERR_OVERRUN 0x04
120 #define ERR_UNDERRUN 0x01
122 /* Bits in setup register */
123 #define S_SW_RESET 0x80
124 #define S_GCR_WRITE 0x40
125 #define S_IBM_DRIVE 0x20
126 #define S_TEST_MODE 0x10
127 #define S_FCLK_DIV2 0x08
129 #define S_COPY_PROT 0x02
130 #define S_INV_WDATA 0x01
132 /* Select values for swim3_action */
133 #define SEEK_POSITIVE 0
134 #define SEEK_NEGATIVE 4
143 /* Select values for swim3_select and swim3_readbit */
147 #define RELAX 3 /* also eject in progress */
148 #define READ_DATA_0 4
149 #define TWOMEG_DRIVE 5
150 #define SINGLE_SIDED 6 /* drive or diskette is 4MB type? */
151 #define DRIVE_PRESENT 7
154 #define TRACK_ZERO 10
156 #define READ_DATA_1 12
158 #define SEEK_COMPLETE 14
159 #define ONEMEG_MEDIA 15
161 /* Definitions of values used in writing and formatting */
162 #define DATA_ESCAPE 0x99
163 #define GCR_SYNC_EXC 0x3f
164 #define GCR_SYNC_CONV 0x80
165 #define GCR_FIRST_MARK 0xd5
166 #define GCR_SECOND_MARK 0xaa
167 #define GCR_ADDR_MARK "\xd5\xaa\x00"
168 #define GCR_DATA_MARK "\xd5\xaa\x0b"
169 #define GCR_SLIP_BYTE "\x27\xaa"
170 #define GCR_SELF_SYNC "\x3f\xbf\x1e\x34\x3c\x3f"
172 #define DATA_99 "\x99\x99"
173 #define MFM_ADDR_MARK "\x99\xa1\x99\xa1\x99\xa1\x99\xfe"
174 #define MFM_INDEX_MARK "\x99\xc2\x99\xc2\x99\xc2\x99\xfc"
175 #define MFM_GAP_LEN 12
177 struct floppy_state
{
178 enum swim_state state
;
180 struct swim3 __iomem
*swim3
; /* hardware registers */
181 struct dbdma_regs __iomem
*dma
; /* DMA controller registers */
182 int swim3_intr
; /* interrupt number for SWIM3 */
183 int dma_intr
; /* interrupt number for DMA channel */
184 int cur_cyl
; /* cylinder head is on, or -1 */
185 int cur_sector
; /* last sector we saw go past */
186 int req_cyl
; /* the cylinder for the current r/w request */
187 int head
; /* head number ditto */
188 int req_sector
; /* sector number ditto */
189 int scount
; /* # sectors we're transferring at present */
192 int secpercyl
; /* disk geometry information */
195 int write_prot
; /* 1 if write-protected, 0 if not, -1 dunno */
196 struct dbdma_cmd
*dma_cmd
;
199 struct timer_list timeout
;
202 wait_queue_head_t wait
;
204 struct macio_dev
*mdev
;
205 char dbdma_cmd_space
[5 * sizeof(struct dbdma_cmd
)];
208 static struct floppy_state floppy_states
[MAX_FLOPPIES
];
209 static int floppy_count
= 0;
210 static DEFINE_SPINLOCK(swim3_lock
);
212 static unsigned short write_preamble
[] = {
213 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, /* gap field */
214 0, 0, 0, 0, 0, 0, /* sync field */
215 0x99a1, 0x99a1, 0x99a1, 0x99fb, /* data address mark */
216 0x990f /* no escape for 512 bytes */
219 static unsigned short write_postamble
[] = {
220 0x9904, /* insert CRC */
222 0x9908, /* stop writing */
226 static void swim3_select(struct floppy_state
*fs
, int sel
);
227 static void swim3_action(struct floppy_state
*fs
, int action
);
228 static int swim3_readbit(struct floppy_state
*fs
, int bit
);
229 static void do_fd_request(struct request_queue
* q
);
230 static void start_request(struct floppy_state
*fs
);
231 static void set_timeout(struct floppy_state
*fs
, int nticks
,
232 void (*proc
)(unsigned long));
233 static void scan_track(struct floppy_state
*fs
);
234 static void seek_track(struct floppy_state
*fs
, int n
);
235 static void init_dma(struct dbdma_cmd
*cp
, int cmd
, void *buf
, int count
);
236 static void setup_transfer(struct floppy_state
*fs
);
237 static void act(struct floppy_state
*fs
);
238 static void scan_timeout(unsigned long data
);
239 static void seek_timeout(unsigned long data
);
240 static void settle_timeout(unsigned long data
);
241 static void xfer_timeout(unsigned long data
);
242 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
);
243 /*static void fd_dma_interrupt(int irq, void *dev_id);*/
244 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
246 static void release_drive(struct floppy_state
*fs
);
247 static int fd_eject(struct floppy_state
*fs
);
248 static int floppy_ioctl(struct block_device
*bdev
, fmode_t mode
,
249 unsigned int cmd
, unsigned long param
);
250 static int floppy_open(struct block_device
*bdev
, fmode_t mode
);
251 static int floppy_release(struct gendisk
*disk
, fmode_t mode
);
252 static int floppy_check_change(struct gendisk
*disk
);
253 static int floppy_revalidate(struct gendisk
*disk
);
255 static bool swim3_end_request(int err
, unsigned int nr_bytes
)
257 if (__blk_end_request(fd_req
, err
, nr_bytes
))
264 static bool swim3_end_request_cur(int err
)
266 return swim3_end_request(err
, blk_rq_cur_bytes(fd_req
));
269 static void swim3_select(struct floppy_state
*fs
, int sel
)
271 struct swim3 __iomem
*sw
= fs
->swim3
;
273 out_8(&sw
->select
, RELAX
);
275 out_8(&sw
->control_bis
, SELECT
);
277 out_8(&sw
->control_bic
, SELECT
);
278 out_8(&sw
->select
, sel
& CA_MASK
);
281 static void swim3_action(struct floppy_state
*fs
, int action
)
283 struct swim3 __iomem
*sw
= fs
->swim3
;
285 swim3_select(fs
, action
);
287 out_8(&sw
->select
, sw
->select
| LSTRB
);
289 out_8(&sw
->select
, sw
->select
& ~LSTRB
);
293 static int swim3_readbit(struct floppy_state
*fs
, int bit
)
295 struct swim3 __iomem
*sw
= fs
->swim3
;
298 swim3_select(fs
, bit
);
300 stat
= in_8(&sw
->status
);
301 return (stat
& DATA
) == 0;
304 static void do_fd_request(struct request_queue
* q
)
308 for(i
=0; i
<floppy_count
; i
++) {
309 struct floppy_state
*fs
= &floppy_states
[i
];
310 if (fs
->mdev
->media_bay
&&
311 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
317 static void start_request(struct floppy_state
*fs
)
322 if (fs
->state
== idle
&& fs
->wanted
) {
323 fs
->state
= available
;
327 while (fs
->state
== idle
) {
329 fd_req
= blk_fetch_request(swim3_queue
);
335 printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
336 req
->rq_disk
->disk_name
, req
->cmd
,
337 (long)blk_rq_pos(req
), blk_rq_sectors(req
), req
->buffer
);
338 printk(" errors=%d current_nr_sectors=%u\n",
339 req
->errors
, blk_rq_cur_sectors(req
));
342 if (blk_rq_pos(req
) >= fs
->total_secs
) {
343 swim3_end_request_cur(-EIO
);
347 swim3_end_request_cur(-EIO
);
351 if (rq_data_dir(req
) == WRITE
) {
352 if (fs
->write_prot
< 0)
353 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
354 if (fs
->write_prot
) {
355 swim3_end_request_cur(-EIO
);
360 /* Do not remove the cast. blk_rq_pos(req) is now a
361 * sector_t and can be 64 bits, but it will never go
362 * past 32 bits for this driver anyway, so we can
363 * safely cast it down and not have to do a 64/32
366 fs
->req_cyl
= ((long)blk_rq_pos(req
)) / fs
->secpercyl
;
367 x
= ((long)blk_rq_pos(req
)) % fs
->secpercyl
;
368 fs
->head
= x
/ fs
->secpertrack
;
369 fs
->req_sector
= x
% fs
->secpertrack
+ 1;
371 fs
->state
= do_transfer
;
378 static void set_timeout(struct floppy_state
*fs
, int nticks
,
379 void (*proc
)(unsigned long))
383 spin_lock_irqsave(&fs
->lock
, flags
);
384 if (fs
->timeout_pending
)
385 del_timer(&fs
->timeout
);
386 fs
->timeout
.expires
= jiffies
+ nticks
;
387 fs
->timeout
.function
= proc
;
388 fs
->timeout
.data
= (unsigned long) fs
;
389 add_timer(&fs
->timeout
);
390 fs
->timeout_pending
= 1;
391 spin_unlock_irqrestore(&fs
->lock
, flags
);
394 static inline void scan_track(struct floppy_state
*fs
)
396 struct swim3 __iomem
*sw
= fs
->swim3
;
398 swim3_select(fs
, READ_DATA_0
);
399 in_8(&sw
->intr
); /* clear SEEN_SECTOR bit */
401 out_8(&sw
->intr_enable
, SEEN_SECTOR
);
402 out_8(&sw
->control_bis
, DO_ACTION
);
403 /* enable intr when track found */
404 set_timeout(fs
, HZ
, scan_timeout
); /* enable timeout */
407 static inline void seek_track(struct floppy_state
*fs
, int n
)
409 struct swim3 __iomem
*sw
= fs
->swim3
;
412 swim3_action(fs
, SEEK_POSITIVE
);
415 swim3_action(fs
, SEEK_NEGATIVE
);
418 fs
->expect_cyl
= (fs
->cur_cyl
>= 0)? fs
->cur_cyl
+ n
: -1;
419 swim3_select(fs
, STEP
);
421 /* enable intr when seek finished */
422 out_8(&sw
->intr_enable
, SEEK_DONE
);
423 out_8(&sw
->control_bis
, DO_SEEK
);
424 set_timeout(fs
, 3*HZ
, seek_timeout
); /* enable timeout */
428 static inline void init_dma(struct dbdma_cmd
*cp
, int cmd
,
429 void *buf
, int count
)
431 st_le16(&cp
->req_count
, count
);
432 st_le16(&cp
->command
, cmd
);
433 st_le32(&cp
->phy_addr
, virt_to_bus(buf
));
437 static inline void setup_transfer(struct floppy_state
*fs
)
440 struct swim3 __iomem
*sw
= fs
->swim3
;
441 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
442 struct dbdma_regs __iomem
*dr
= fs
->dma
;
444 if (blk_rq_cur_sectors(fd_req
) <= 0) {
445 printk(KERN_ERR
"swim3: transfer 0 sectors?\n");
448 if (rq_data_dir(fd_req
) == WRITE
)
451 n
= fs
->secpertrack
- fs
->req_sector
+ 1;
452 if (n
> blk_rq_cur_sectors(fd_req
))
453 n
= blk_rq_cur_sectors(fd_req
);
456 swim3_select(fs
, fs
->head
? READ_DATA_1
: READ_DATA_0
);
457 out_8(&sw
->sector
, fs
->req_sector
);
458 out_8(&sw
->nsect
, n
);
460 out_le32(&dr
->cmdptr
, virt_to_bus(cp
));
461 if (rq_data_dir(fd_req
) == WRITE
) {
462 /* Set up 3 dma commands: write preamble, data, postamble */
463 init_dma(cp
, OUTPUT_MORE
, write_preamble
, sizeof(write_preamble
));
465 init_dma(cp
, OUTPUT_MORE
, fd_req
->buffer
, 512);
467 init_dma(cp
, OUTPUT_LAST
, write_postamble
, sizeof(write_postamble
));
469 init_dma(cp
, INPUT_LAST
, fd_req
->buffer
, n
* 512);
472 out_le16(&cp
->command
, DBDMA_STOP
);
473 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
475 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
476 if (rq_data_dir(fd_req
) == WRITE
)
477 out_8(&sw
->control_bis
, WRITE_SECTORS
);
479 out_le32(&dr
->control
, (RUN
<< 16) | RUN
);
480 /* enable intr when transfer complete */
481 out_8(&sw
->intr_enable
, TRANSFER_DONE
);
482 out_8(&sw
->control_bis
, DO_ACTION
);
483 set_timeout(fs
, 2*HZ
, xfer_timeout
); /* enable timeout */
486 static void act(struct floppy_state
*fs
)
491 return; /* XXX shouldn't get here */
494 if (swim3_readbit(fs
, TRACK_ZERO
)) {
496 if (fs
->req_cyl
== 0)
497 fs
->state
= do_transfer
;
506 if (fs
->cur_cyl
< 0) {
508 fs
->state
= locating
;
511 if (fs
->req_cyl
== fs
->cur_cyl
) {
512 printk("whoops, seeking 0\n");
513 fs
->state
= do_transfer
;
516 seek_track(fs
, fs
->req_cyl
- fs
->cur_cyl
);
520 /* check for SEEK_COMPLETE after 30ms */
521 fs
->settle_time
= (HZ
+ 32) / 33;
522 set_timeout(fs
, fs
->settle_time
, settle_timeout
);
526 if (fs
->cur_cyl
!= fs
->req_cyl
) {
527 if (fs
->retries
> 5) {
528 swim3_end_request_cur(-EIO
);
543 printk(KERN_ERR
"swim3: unknown state %d\n", fs
->state
);
549 static void scan_timeout(unsigned long data
)
551 struct floppy_state
*fs
= (struct floppy_state
*) data
;
552 struct swim3 __iomem
*sw
= fs
->swim3
;
554 fs
->timeout_pending
= 0;
555 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
556 out_8(&sw
->select
, RELAX
);
557 out_8(&sw
->intr_enable
, 0);
559 if (fs
->retries
> 5) {
560 swim3_end_request_cur(-EIO
);
569 static void seek_timeout(unsigned long data
)
571 struct floppy_state
*fs
= (struct floppy_state
*) data
;
572 struct swim3 __iomem
*sw
= fs
->swim3
;
574 fs
->timeout_pending
= 0;
575 out_8(&sw
->control_bic
, DO_SEEK
);
576 out_8(&sw
->select
, RELAX
);
577 out_8(&sw
->intr_enable
, 0);
578 printk(KERN_ERR
"swim3: seek timeout\n");
579 swim3_end_request_cur(-EIO
);
584 static void settle_timeout(unsigned long data
)
586 struct floppy_state
*fs
= (struct floppy_state
*) data
;
587 struct swim3 __iomem
*sw
= fs
->swim3
;
589 fs
->timeout_pending
= 0;
590 if (swim3_readbit(fs
, SEEK_COMPLETE
)) {
591 out_8(&sw
->select
, RELAX
);
592 fs
->state
= locating
;
596 out_8(&sw
->select
, RELAX
);
597 if (fs
->settle_time
< 2*HZ
) {
599 set_timeout(fs
, 1, settle_timeout
);
602 printk(KERN_ERR
"swim3: seek settle timeout\n");
603 swim3_end_request_cur(-EIO
);
608 static void xfer_timeout(unsigned long data
)
610 struct floppy_state
*fs
= (struct floppy_state
*) data
;
611 struct swim3 __iomem
*sw
= fs
->swim3
;
612 struct dbdma_regs __iomem
*dr
= fs
->dma
;
615 fs
->timeout_pending
= 0;
616 out_le32(&dr
->control
, RUN
<< 16);
617 /* We must wait a bit for dbdma to stop */
618 for (n
= 0; (in_le32(&dr
->status
) & ACTIVE
) && n
< 1000; n
++)
620 out_8(&sw
->intr_enable
, 0);
621 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
622 out_8(&sw
->select
, RELAX
);
623 printk(KERN_ERR
"swim3: timeout %sing sector %ld\n",
624 (rq_data_dir(fd_req
)==WRITE
? "writ": "read"),
625 (long)blk_rq_pos(fd_req
));
626 swim3_end_request_cur(-EIO
);
631 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
)
633 struct floppy_state
*fs
= (struct floppy_state
*) dev_id
;
634 struct swim3 __iomem
*sw
= fs
->swim3
;
637 struct dbdma_regs __iomem
*dr
;
638 struct dbdma_cmd
*cp
;
640 intr
= in_8(&sw
->intr
);
641 err
= (intr
& ERROR_INTR
)? in_8(&sw
->error
): 0;
642 if ((intr
& ERROR_INTR
) && fs
->state
!= do_transfer
)
643 printk(KERN_ERR
"swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
644 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
647 if (intr
& SEEN_SECTOR
) {
648 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
649 out_8(&sw
->select
, RELAX
);
650 out_8(&sw
->intr_enable
, 0);
651 del_timer(&fs
->timeout
);
652 fs
->timeout_pending
= 0;
653 if (sw
->ctrack
== 0xff) {
654 printk(KERN_ERR
"swim3: seen sector but cyl=ff?\n");
656 if (fs
->retries
> 5) {
657 swim3_end_request_cur(-EIO
);
666 fs
->cur_cyl
= sw
->ctrack
;
667 fs
->cur_sector
= sw
->csect
;
668 if (fs
->expect_cyl
!= -1 && fs
->expect_cyl
!= fs
->cur_cyl
)
669 printk(KERN_ERR
"swim3: expected cyl %d, got %d\n",
670 fs
->expect_cyl
, fs
->cur_cyl
);
671 fs
->state
= do_transfer
;
677 if (sw
->nseek
== 0) {
678 out_8(&sw
->control_bic
, DO_SEEK
);
679 out_8(&sw
->select
, RELAX
);
680 out_8(&sw
->intr_enable
, 0);
681 del_timer(&fs
->timeout
);
682 fs
->timeout_pending
= 0;
683 if (fs
->state
== seeking
)
685 fs
->state
= settling
;
690 out_8(&sw
->intr_enable
, 0);
691 del_timer(&fs
->timeout
);
692 fs
->timeout_pending
= 0;
696 if ((intr
& (ERROR_INTR
| TRANSFER_DONE
)) == 0)
698 out_8(&sw
->intr_enable
, 0);
699 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
700 out_8(&sw
->select
, RELAX
);
701 del_timer(&fs
->timeout
);
702 fs
->timeout_pending
= 0;
705 if (rq_data_dir(fd_req
) == WRITE
)
708 * Check that the main data transfer has finished.
709 * On writing, the swim3 sometimes doesn't use
710 * up all the bytes of the postamble, so we can still
711 * see DMA active here. That doesn't matter as long
712 * as all the sector data has been transferred.
714 if ((intr
& ERROR_INTR
) == 0 && cp
->xfer_status
== 0) {
715 /* wait a little while for DMA to complete */
716 for (n
= 0; n
< 100; ++n
) {
717 if (cp
->xfer_status
!= 0)
724 out_le32(&dr
->control
, (RUN
| PAUSE
) << 16);
725 stat
= ld_le16(&cp
->xfer_status
);
726 resid
= ld_le16(&cp
->res_count
);
727 if (intr
& ERROR_INTR
) {
728 n
= fs
->scount
- 1 - resid
/ 512;
730 blk_update_request(fd_req
, 0, n
<< 9);
733 if (fs
->retries
< 5) {
737 printk("swim3: error %sing block %ld (err=%x)\n",
738 rq_data_dir(fd_req
) == WRITE
? "writ": "read",
739 (long)blk_rq_pos(fd_req
), err
);
740 swim3_end_request_cur(-EIO
);
744 if ((stat
& ACTIVE
) == 0 || resid
!= 0) {
745 /* musta been an error */
746 printk(KERN_ERR
"swim3: fd dma: stat=%x resid=%d\n", stat
, resid
);
747 printk(KERN_ERR
" state=%d, dir=%x, intr=%x, err=%x\n",
748 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
749 swim3_end_request_cur(-EIO
);
754 if (swim3_end_request(0, fs
->scount
<< 9)) {
755 fs
->req_sector
+= fs
->scount
;
756 if (fs
->req_sector
> fs
->secpertrack
) {
757 fs
->req_sector
-= fs
->secpertrack
;
758 if (++fs
->head
> 1) {
767 if (fs
->state
== idle
)
771 printk(KERN_ERR
"swim3: don't know what to do in state %d\n", fs
->state
);
777 static void fd_dma_interrupt(int irq, void *dev_id)
782 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
787 spin_lock_irqsave(&fs
->lock
, flags
);
788 if (fs
->state
!= idle
) {
790 while (fs
->state
!= available
) {
791 if (interruptible
&& signal_pending(current
)) {
793 spin_unlock_irqrestore(&fs
->lock
, flags
);
796 interruptible_sleep_on(&fs
->wait
);
801 spin_unlock_irqrestore(&fs
->lock
, flags
);
805 static void release_drive(struct floppy_state
*fs
)
809 spin_lock_irqsave(&fs
->lock
, flags
);
812 spin_unlock_irqrestore(&fs
->lock
, flags
);
815 static int fd_eject(struct floppy_state
*fs
)
819 err
= grab_drive(fs
, ejecting
, 1);
822 swim3_action(fs
, EJECT
);
823 for (n
= 20; n
> 0; --n
) {
824 if (signal_pending(current
)) {
828 swim3_select(fs
, RELAX
);
829 schedule_timeout_interruptible(1);
830 if (swim3_readbit(fs
, DISK_IN
) == 0)
833 swim3_select(fs
, RELAX
);
840 static struct floppy_struct floppy_type
=
841 { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL
}; /* 7 1.44MB 3.5" */
843 static int floppy_locked_ioctl(struct block_device
*bdev
, fmode_t mode
,
844 unsigned int cmd
, unsigned long param
)
846 struct floppy_state
*fs
= bdev
->bd_disk
->private_data
;
849 if ((cmd
& 0x80) && !capable(CAP_SYS_ADMIN
))
852 if (fs
->mdev
->media_bay
&&
853 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
858 if (fs
->ref_count
!= 1)
863 if (copy_to_user((void __user
*) param
, &floppy_type
,
864 sizeof(struct floppy_struct
)))
871 static int floppy_ioctl(struct block_device
*bdev
, fmode_t mode
,
872 unsigned int cmd
, unsigned long param
)
877 ret
= floppy_locked_ioctl(bdev
, mode
, cmd
, param
);
883 static int floppy_open(struct block_device
*bdev
, fmode_t mode
)
885 struct floppy_state
*fs
= bdev
->bd_disk
->private_data
;
886 struct swim3 __iomem
*sw
= fs
->swim3
;
889 if (fs
->ref_count
== 0) {
890 if (fs
->mdev
->media_bay
&&
891 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
893 out_8(&sw
->setup
, S_IBM_DRIVE
| S_FCLK_DIV2
);
894 out_8(&sw
->control_bic
, 0xff);
895 out_8(&sw
->mode
, 0x95);
897 out_8(&sw
->intr_enable
, 0);
898 out_8(&sw
->control_bis
, DRIVE_ENABLE
| INTR_ENABLE
);
899 swim3_action(fs
, MOTOR_ON
);
902 for (n
= 0; n
< 2 * HZ
; ++n
) {
903 if (n
>= HZ
/30 && swim3_readbit(fs
, SEEK_COMPLETE
))
905 if (signal_pending(current
)) {
909 swim3_select(fs
, RELAX
);
910 schedule_timeout_interruptible(1);
912 if (err
== 0 && (swim3_readbit(fs
, SEEK_COMPLETE
) == 0
913 || swim3_readbit(fs
, DISK_IN
) == 0))
915 swim3_action(fs
, SETMFM
);
916 swim3_select(fs
, RELAX
);
918 } else if (fs
->ref_count
== -1 || mode
& FMODE_EXCL
)
921 if (err
== 0 && (mode
& FMODE_NDELAY
) == 0
922 && (mode
& (FMODE_READ
|FMODE_WRITE
))) {
923 check_disk_change(bdev
);
928 if (err
== 0 && (mode
& FMODE_WRITE
)) {
929 if (fs
->write_prot
< 0)
930 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
936 if (fs
->ref_count
== 0) {
937 swim3_action(fs
, MOTOR_OFF
);
938 out_8(&sw
->control_bic
, DRIVE_ENABLE
| INTR_ENABLE
);
939 swim3_select(fs
, RELAX
);
944 if (mode
& FMODE_EXCL
)
952 static int floppy_unlocked_open(struct block_device
*bdev
, fmode_t mode
)
957 ret
= floppy_open(bdev
, mode
);
963 static int floppy_release(struct gendisk
*disk
, fmode_t mode
)
965 struct floppy_state
*fs
= disk
->private_data
;
966 struct swim3 __iomem
*sw
= fs
->swim3
;
968 if (fs
->ref_count
> 0 && --fs
->ref_count
== 0) {
969 swim3_action(fs
, MOTOR_OFF
);
970 out_8(&sw
->control_bic
, 0xff);
971 swim3_select(fs
, RELAX
);
977 static int floppy_check_change(struct gendisk
*disk
)
979 struct floppy_state
*fs
= disk
->private_data
;
983 static int floppy_revalidate(struct gendisk
*disk
)
985 struct floppy_state
*fs
= disk
->private_data
;
986 struct swim3 __iomem
*sw
;
989 if (fs
->mdev
->media_bay
&&
990 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
994 grab_drive(fs
, revalidating
, 0);
995 out_8(&sw
->intr_enable
, 0);
996 out_8(&sw
->control_bis
, DRIVE_ENABLE
);
997 swim3_action(fs
, MOTOR_ON
); /* necessary? */
1001 for (n
= HZ
; n
> 0; --n
) {
1002 if (swim3_readbit(fs
, SEEK_COMPLETE
))
1004 if (signal_pending(current
))
1006 swim3_select(fs
, RELAX
);
1007 schedule_timeout_interruptible(1);
1009 ret
= swim3_readbit(fs
, SEEK_COMPLETE
) == 0
1010 || swim3_readbit(fs
, DISK_IN
) == 0;
1012 swim3_action(fs
, MOTOR_OFF
);
1015 swim3_action(fs
, SETMFM
);
1017 swim3_select(fs
, RELAX
);
1023 static const struct block_device_operations floppy_fops
= {
1024 .open
= floppy_unlocked_open
,
1025 .release
= floppy_release
,
1026 .ioctl
= floppy_ioctl
,
1027 .media_changed
= floppy_check_change
,
1028 .revalidate_disk
= floppy_revalidate
,
1031 static int swim3_add_device(struct macio_dev
*mdev
, int index
)
1033 struct device_node
*swim
= mdev
->ofdev
.dev
.of_node
;
1034 struct floppy_state
*fs
= &floppy_states
[index
];
1037 /* Check & Request resources */
1038 if (macio_resource_count(mdev
) < 2) {
1039 printk(KERN_WARNING
"ifd%d: no address for %s\n",
1040 index
, swim
->full_name
);
1043 if (macio_irq_count(mdev
) < 2) {
1044 printk(KERN_WARNING
"fd%d: no intrs for device %s\n",
1045 index
, swim
->full_name
);
1047 if (macio_request_resource(mdev
, 0, "swim3 (mmio)")) {
1048 printk(KERN_ERR
"fd%d: can't request mmio resource for %s\n",
1049 index
, swim
->full_name
);
1052 if (macio_request_resource(mdev
, 1, "swim3 (dma)")) {
1053 printk(KERN_ERR
"fd%d: can't request dma resource for %s\n",
1054 index
, swim
->full_name
);
1055 macio_release_resource(mdev
, 0);
1058 dev_set_drvdata(&mdev
->ofdev
.dev
, fs
);
1060 if (mdev
->media_bay
== NULL
)
1061 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 1);
1063 memset(fs
, 0, sizeof(*fs
));
1064 spin_lock_init(&fs
->lock
);
1066 fs
->swim3
= (struct swim3 __iomem
*)
1067 ioremap(macio_resource_start(mdev
, 0), 0x200);
1068 if (fs
->swim3
== NULL
) {
1069 printk("fd%d: couldn't map registers for %s\n",
1070 index
, swim
->full_name
);
1074 fs
->dma
= (struct dbdma_regs __iomem
*)
1075 ioremap(macio_resource_start(mdev
, 1), 0x200);
1076 if (fs
->dma
== NULL
) {
1077 printk("fd%d: couldn't map DMA for %s\n",
1078 index
, swim
->full_name
);
1083 fs
->swim3_intr
= macio_irq(mdev
, 0);
1084 fs
->dma_intr
= macio_irq(mdev
, 1);
1086 fs
->cur_sector
= -1;
1088 fs
->secpertrack
= 18;
1089 fs
->total_secs
= 2880;
1091 init_waitqueue_head(&fs
->wait
);
1093 fs
->dma_cmd
= (struct dbdma_cmd
*) DBDMA_ALIGN(fs
->dbdma_cmd_space
);
1094 memset(fs
->dma_cmd
, 0, 2 * sizeof(struct dbdma_cmd
));
1095 st_le16(&fs
->dma_cmd
[1].command
, DBDMA_STOP
);
1097 if (request_irq(fs
->swim3_intr
, swim3_interrupt
, 0, "SWIM3", fs
)) {
1098 printk(KERN_ERR
"fd%d: couldn't request irq %d for %s\n",
1099 index
, fs
->swim3_intr
, swim
->full_name
);
1100 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 0);
1105 if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
1106 printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
1112 init_timer(&fs
->timeout
);
1114 printk(KERN_INFO
"fd%d: SWIM3 floppy controller %s\n", floppy_count
,
1115 mdev
->media_bay
? "in media bay" : "");
1124 macio_release_resource(mdev
, 0);
1125 macio_release_resource(mdev
, 1);
1130 static int __devinit
swim3_attach(struct macio_dev
*mdev
, const struct of_device_id
*match
)
1133 struct gendisk
*disk
;
1136 rc
= swim3_add_device(mdev
, floppy_count
);
1140 /* Now create the queue if not there yet */
1141 if (swim3_queue
== NULL
) {
1142 /* If we failed, there isn't much we can do as the driver is still
1143 * too dumb to remove the device, just bail out
1145 if (register_blkdev(FLOPPY_MAJOR
, "fd"))
1147 swim3_queue
= blk_init_queue(do_fd_request
, &swim3_lock
);
1148 if (swim3_queue
== NULL
) {
1149 unregister_blkdev(FLOPPY_MAJOR
, "fd");
1154 /* Now register that disk. Same comment about failure handling */
1156 disk
= disks
[i
] = alloc_disk(1);
1160 disk
->major
= FLOPPY_MAJOR
;
1161 disk
->first_minor
= i
;
1162 disk
->fops
= &floppy_fops
;
1163 disk
->private_data
= &floppy_states
[i
];
1164 disk
->queue
= swim3_queue
;
1165 disk
->flags
|= GENHD_FL_REMOVABLE
;
1166 sprintf(disk
->disk_name
, "fd%d", i
);
1167 set_capacity(disk
, 2880);
1173 static struct of_device_id swim3_match
[] =
1179 .compatible
= "ohare-swim3"
1182 .compatible
= "swim3"
1186 static struct macio_driver swim3_driver
=
1190 .of_match_table
= swim3_match
,
1192 .probe
= swim3_attach
,
1194 .suspend
= swim3_suspend
,
1195 .resume
= swim3_resume
,
1200 int swim3_init(void)
1202 macio_register_driver(&swim3_driver
);
1206 module_init(swim3_init
)
1208 MODULE_LICENSE("GPL");
1209 MODULE_AUTHOR("Paul Mackerras");
1210 MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR
);