Merge tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
[linux-stable.git] / include / scsi / sas.h
blob71b749bed3b05d8304609cdadce9fe3349d4bd32
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * SAS structures and definitions header file
5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 */
9 #ifndef _SAS_H_
10 #define _SAS_H_
12 #include <linux/types.h>
13 #include <asm/byteorder.h>
15 #define SAS_ADDR_SIZE 8
16 #define HASHED_SAS_ADDR_SIZE 3
17 #define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
19 #define SMP_REQUEST 0x40
20 #define SMP_RESPONSE 0x41
22 #define SSP_DATA 0x01
23 #define SSP_XFER_RDY 0x05
24 #define SSP_COMMAND 0x06
25 #define SSP_RESPONSE 0x07
26 #define SSP_TASK 0x16
28 #define SMP_REPORT_GENERAL 0x00
29 #define SMP_REPORT_MANUF_INFO 0x01
30 #define SMP_READ_GPIO_REG 0x02
31 #define SMP_DISCOVER 0x10
32 #define SMP_REPORT_PHY_ERR_LOG 0x11
33 #define SMP_REPORT_PHY_SATA 0x12
34 #define SMP_REPORT_ROUTE_INFO 0x13
35 #define SMP_WRITE_GPIO_REG 0x82
36 #define SMP_CONF_ROUTE_INFO 0x90
37 #define SMP_PHY_CONTROL 0x91
38 #define SMP_PHY_TEST_FUNCTION 0x92
40 #define SMP_RESP_FUNC_ACC 0x00
41 #define SMP_RESP_FUNC_UNK 0x01
42 #define SMP_RESP_FUNC_FAILED 0x02
43 #define SMP_RESP_INV_FRM_LEN 0x03
44 #define SMP_RESP_NO_PHY 0x10
45 #define SMP_RESP_NO_INDEX 0x11
46 #define SMP_RESP_PHY_NO_SATA 0x12
47 #define SMP_RESP_PHY_UNK_OP 0x13
48 #define SMP_RESP_PHY_UNK_TESTF 0x14
49 #define SMP_RESP_PHY_TEST_INPROG 0x15
50 #define SMP_RESP_PHY_VACANT 0x16
52 /* SAM TMFs */
53 #define TMF_ABORT_TASK 0x01
54 #define TMF_ABORT_TASK_SET 0x02
55 #define TMF_CLEAR_TASK_SET 0x04
56 #define TMF_LU_RESET 0x08
57 #define TMF_CLEAR_ACA 0x40
58 #define TMF_QUERY_TASK 0x80
60 /* SAS TMF responses */
61 #define TMF_RESP_FUNC_COMPLETE 0x00
62 #define TMF_RESP_INVALID_FRAME 0x02
63 #define TMF_RESP_FUNC_ESUPP 0x04
64 #define TMF_RESP_FUNC_FAILED 0x05
65 #define TMF_RESP_FUNC_SUCC 0x08
66 #define TMF_RESP_NO_LUN 0x09
67 #define TMF_RESP_OVERLAPPED_TAG 0x0A
69 enum sas_oob_mode {
70 OOB_NOT_CONNECTED,
71 SATA_OOB_MODE,
72 SAS_OOB_MODE
75 /* See sas_discover.c if you plan on changing these */
76 enum sas_device_type {
77 /* these are SAS protocol defined (attached device type field) */
78 SAS_PHY_UNUSED = 0,
79 SAS_END_DEVICE = 1,
80 SAS_EDGE_EXPANDER_DEVICE = 2,
81 SAS_FANOUT_EXPANDER_DEVICE = 3,
82 /* these are internal to libsas */
83 SAS_HA = 4,
84 SAS_SATA_DEV = 5,
85 SAS_SATA_PM = 7,
86 SAS_SATA_PM_PORT = 8,
87 SAS_SATA_PENDING = 9,
90 enum sas_protocol {
91 SAS_PROTOCOL_NONE = 0,
92 SAS_PROTOCOL_SATA = 0x01,
93 SAS_PROTOCOL_SMP = 0x02,
94 SAS_PROTOCOL_STP = 0x04,
95 SAS_PROTOCOL_SSP = 0x08,
96 SAS_PROTOCOL_ALL = 0x0E,
97 SAS_PROTOCOL_STP_ALL = SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
98 /* these are internal to libsas */
99 SAS_PROTOCOL_INTERNAL_ABORT = 0x10,
102 /* From the spec; local phys only */
103 enum phy_func {
104 PHY_FUNC_NOP,
105 PHY_FUNC_LINK_RESET, /* Enables the phy */
106 PHY_FUNC_HARD_RESET,
107 PHY_FUNC_DISABLE,
108 PHY_FUNC_CLEAR_ERROR_LOG = 5,
109 PHY_FUNC_CLEAR_AFFIL,
110 PHY_FUNC_TX_SATA_PS_SIGNAL,
111 PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
112 PHY_FUNC_SET_LINK_RATE,
113 PHY_FUNC_GET_EVENTS,
116 /* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
117 * Most of those are here for completeness.
119 enum sas_prim {
120 SAS_PRIM_AIP_NORMAL = 1,
121 SAS_PRIM_AIP_R0 = 2,
122 SAS_PRIM_AIP_R1 = 3,
123 SAS_PRIM_AIP_R2 = 4,
124 SAS_PRIM_AIP_WC = 5,
125 SAS_PRIM_AIP_WD = 6,
126 SAS_PRIM_AIP_WP = 7,
127 SAS_PRIM_AIP_RWP = 8,
129 SAS_PRIM_BC_CH = 9,
130 SAS_PRIM_BC_RCH0 = 10,
131 SAS_PRIM_BC_RCH1 = 11,
132 SAS_PRIM_BC_R0 = 12,
133 SAS_PRIM_BC_R1 = 13,
134 SAS_PRIM_BC_R2 = 14,
135 SAS_PRIM_BC_R3 = 15,
136 SAS_PRIM_BC_R4 = 16,
138 SAS_PRIM_NOTIFY_ENSP= 17,
139 SAS_PRIM_NOTIFY_R0 = 18,
140 SAS_PRIM_NOTIFY_R1 = 19,
141 SAS_PRIM_NOTIFY_R2 = 20,
143 SAS_PRIM_CLOSE_CLAF = 21,
144 SAS_PRIM_CLOSE_NORM = 22,
145 SAS_PRIM_CLOSE_R0 = 23,
146 SAS_PRIM_CLOSE_R1 = 24,
148 SAS_PRIM_OPEN_RTRY = 25,
149 SAS_PRIM_OPEN_RJCT = 26,
150 SAS_PRIM_OPEN_ACPT = 27,
152 SAS_PRIM_DONE = 28,
153 SAS_PRIM_BREAK = 29,
155 SATA_PRIM_DMAT = 33,
156 SATA_PRIM_PMNAK = 34,
157 SATA_PRIM_PMACK = 35,
158 SATA_PRIM_PMREQ_S = 36,
159 SATA_PRIM_PMREQ_P = 37,
160 SATA_SATA_R_ERR = 38,
163 enum sas_open_rej_reason {
164 /* Abandon open */
165 SAS_OREJ_UNKNOWN = 0,
166 SAS_OREJ_BAD_DEST = 1,
167 SAS_OREJ_CONN_RATE = 2,
168 SAS_OREJ_EPROTO = 3,
169 SAS_OREJ_RESV_AB0 = 4,
170 SAS_OREJ_RESV_AB1 = 5,
171 SAS_OREJ_RESV_AB2 = 6,
172 SAS_OREJ_RESV_AB3 = 7,
173 SAS_OREJ_WRONG_DEST= 8,
174 SAS_OREJ_STP_NORES = 9,
176 /* Retry open */
177 SAS_OREJ_NO_DEST = 10,
178 SAS_OREJ_PATH_BLOCKED = 11,
179 SAS_OREJ_RSVD_CONT0 = 12,
180 SAS_OREJ_RSVD_CONT1 = 13,
181 SAS_OREJ_RSVD_INIT0 = 14,
182 SAS_OREJ_RSVD_INIT1 = 15,
183 SAS_OREJ_RSVD_STOP0 = 16,
184 SAS_OREJ_RSVD_STOP1 = 17,
185 SAS_OREJ_RSVD_RETRY = 18,
188 enum sas_gpio_reg_type {
189 SAS_GPIO_REG_CFG = 0,
190 SAS_GPIO_REG_RX = 1,
191 SAS_GPIO_REG_RX_GP = 2,
192 SAS_GPIO_REG_TX = 3,
193 SAS_GPIO_REG_TX_GP = 4,
196 /* Response frame DATAPRES field */
197 enum {
198 SAS_DATAPRES_NO_DATA = 0,
199 SAS_DATAPRES_RESPONSE_DATA = 1,
200 SAS_DATAPRES_SENSE_DATA = 2,
203 struct dev_to_host_fis {
204 u8 fis_type; /* 0x34 */
205 u8 flags;
206 u8 status;
207 u8 error;
209 u8 lbal;
210 union { u8 lbam; u8 byte_count_low; };
211 union { u8 lbah; u8 byte_count_high; };
212 u8 device;
214 u8 lbal_exp;
215 u8 lbam_exp;
216 u8 lbah_exp;
217 u8 _r_a;
219 union { u8 sector_count; u8 interrupt_reason; };
220 u8 sector_count_exp;
221 u8 _r_b;
222 u8 _r_c;
224 u32 _r_d;
225 } __attribute__ ((packed));
227 struct host_to_dev_fis {
228 u8 fis_type; /* 0x27 */
229 u8 flags;
230 u8 command;
231 u8 features;
233 u8 lbal;
234 union { u8 lbam; u8 byte_count_low; };
235 union { u8 lbah; u8 byte_count_high; };
236 u8 device;
238 u8 lbal_exp;
239 u8 lbam_exp;
240 u8 lbah_exp;
241 u8 features_exp;
243 union { u8 sector_count; u8 interrupt_reason; };
244 u8 sector_count_exp;
245 u8 _r_a;
246 u8 control;
248 u32 _r_b;
249 } __attribute__ ((packed));
251 /* Prefer to have code clarity over header file clarity.
253 #ifdef __LITTLE_ENDIAN_BITFIELD
254 struct sas_identify_frame {
255 /* Byte 0 */
256 u8 frame_type:4;
257 u8 dev_type:3;
258 u8 _un0:1;
260 /* Byte 1 */
261 u8 _un1;
263 /* Byte 2 */
264 union {
265 struct {
266 u8 _un20:1;
267 u8 smp_iport:1;
268 u8 stp_iport:1;
269 u8 ssp_iport:1;
270 u8 _un247:4;
272 u8 initiator_bits;
275 /* Byte 3 */
276 union {
277 struct {
278 u8 _un30:1;
279 u8 smp_tport:1;
280 u8 stp_tport:1;
281 u8 ssp_tport:1;
282 u8 _un347:4;
284 u8 target_bits;
287 /* Byte 4 - 11 */
288 u8 _un4_11[8];
290 /* Byte 12 - 19 */
291 u8 sas_addr[SAS_ADDR_SIZE];
293 /* Byte 20 */
294 u8 phy_id;
296 u8 _un21_27[7];
298 __be32 crc;
299 } __attribute__ ((packed));
301 struct ssp_frame_hdr {
302 u8 frame_type;
303 u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
304 u8 _r_a;
305 u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
306 __be16 _r_b;
308 u8 changing_data_ptr:1;
309 u8 retransmit:1;
310 u8 retry_data_frames:1;
311 u8 _r_c:5;
313 u8 num_fill_bytes:2;
314 u8 _r_d:6;
316 u32 _r_e;
317 __be16 tag;
318 __be16 tptt;
319 __be32 data_offs;
320 } __attribute__ ((packed));
322 struct ssp_response_iu {
323 u8 _r_a[10];
325 u8 datapres:2;
326 u8 _r_b:6;
328 u8 status;
330 u32 _r_c;
332 __be32 sense_data_len;
333 __be32 response_data_len;
335 union {
336 DECLARE_FLEX_ARRAY(u8, resp_data);
337 DECLARE_FLEX_ARRAY(u8, sense_data);
339 } __attribute__ ((packed));
341 struct ssp_command_iu {
342 u8 lun[8];
343 u8 _r_a;
345 union {
346 struct {
347 u8 attr:3;
348 u8 prio:4;
349 u8 efb:1;
351 u8 efb_prio_attr;
354 u8 _r_b;
356 u8 _r_c:2;
357 u8 add_cdb_len:6;
359 u8 cdb[16];
360 u8 add_cdb[];
361 } __attribute__ ((packed));
363 struct xfer_rdy_iu {
364 __be32 requested_offset;
365 __be32 write_data_len;
366 __be32 _r_a;
367 } __attribute__ ((packed));
369 struct ssp_tmf_iu {
370 u8 lun[8];
371 u16 _r_a;
372 u8 tmf;
373 u8 _r_b;
374 __be16 tag;
375 u8 _r_c[14];
376 } __attribute__ ((packed));
378 /* ---------- SMP ---------- */
380 struct report_general_resp {
381 __be16 change_count;
382 __be16 route_indexes;
383 u8 _r_a;
384 u8 num_phys;
386 u8 conf_route_table:1;
387 u8 configuring:1;
388 u8 config_others:1;
389 u8 orej_retry_supp:1;
390 u8 stp_cont_awt:1;
391 u8 self_config:1;
392 u8 zone_config:1;
393 u8 t2t_supp:1;
395 u8 _r_c;
397 u8 enclosure_logical_id[8];
399 u8 _r_d[12];
400 } __attribute__ ((packed));
402 struct discover_resp {
403 u8 _r_a[5];
405 u8 phy_id;
406 __be16 _r_b;
408 u8 _r_c:4;
409 u8 attached_dev_type:3;
410 u8 _r_d:1;
412 u8 linkrate:4;
413 u8 _r_e:4;
415 u8 attached_sata_host:1;
416 u8 iproto:3;
417 u8 _r_f:4;
419 u8 attached_sata_dev:1;
420 u8 tproto:3;
421 u8 _r_g:3;
422 u8 attached_sata_ps:1;
424 u8 sas_addr[8];
425 u8 attached_sas_addr[8];
426 u8 attached_phy_id;
428 u8 _r_h[7];
430 u8 hmin_linkrate:4;
431 u8 pmin_linkrate:4;
432 u8 hmax_linkrate:4;
433 u8 pmax_linkrate:4;
435 u8 change_count;
437 u8 pptv:4;
438 u8 _r_i:3;
439 u8 virtual:1;
441 u8 routing_attr:4;
442 u8 _r_j:4;
444 u8 conn_type;
445 u8 conn_el_index;
446 u8 conn_phy_link;
448 u8 _r_k[8];
449 } __attribute__ ((packed));
451 struct report_phy_sata_resp {
452 u8 _r_a[5];
454 u8 phy_id;
455 u8 _r_b;
457 u8 affil_valid:1;
458 u8 affil_supp:1;
459 u8 _r_c:6;
461 u32 _r_d;
463 u8 stp_sas_addr[8];
465 struct dev_to_host_fis fis;
467 u32 _r_e;
469 u8 affil_stp_ini_addr[8];
471 __be32 crc;
472 } __attribute__ ((packed));
474 #elif defined(__BIG_ENDIAN_BITFIELD)
475 struct sas_identify_frame {
476 /* Byte 0 */
477 u8 _un0:1;
478 u8 dev_type:3;
479 u8 frame_type:4;
481 /* Byte 1 */
482 u8 _un1;
484 /* Byte 2 */
485 union {
486 struct {
487 u8 _un247:4;
488 u8 ssp_iport:1;
489 u8 stp_iport:1;
490 u8 smp_iport:1;
491 u8 _un20:1;
493 u8 initiator_bits;
496 /* Byte 3 */
497 union {
498 struct {
499 u8 _un347:4;
500 u8 ssp_tport:1;
501 u8 stp_tport:1;
502 u8 smp_tport:1;
503 u8 _un30:1;
505 u8 target_bits;
508 /* Byte 4 - 11 */
509 u8 _un4_11[8];
511 /* Byte 12 - 19 */
512 u8 sas_addr[SAS_ADDR_SIZE];
514 /* Byte 20 */
515 u8 phy_id;
517 u8 _un21_27[7];
519 __be32 crc;
520 } __attribute__ ((packed));
522 struct ssp_frame_hdr {
523 u8 frame_type;
524 u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
525 u8 _r_a;
526 u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
527 __be16 _r_b;
529 u8 _r_c:5;
530 u8 retry_data_frames:1;
531 u8 retransmit:1;
532 u8 changing_data_ptr:1;
534 u8 _r_d:6;
535 u8 num_fill_bytes:2;
537 u32 _r_e;
538 __be16 tag;
539 __be16 tptt;
540 __be32 data_offs;
541 } __attribute__ ((packed));
543 struct ssp_response_iu {
544 u8 _r_a[10];
546 u8 _r_b:6;
547 u8 datapres:2;
549 u8 status;
551 u32 _r_c;
553 __be32 sense_data_len;
554 __be32 response_data_len;
556 union {
557 DECLARE_FLEX_ARRAY(u8, resp_data);
558 DECLARE_FLEX_ARRAY(u8, sense_data);
560 } __attribute__ ((packed));
562 struct ssp_command_iu {
563 u8 lun[8];
564 u8 _r_a;
566 union {
567 struct {
568 u8 efb:1;
569 u8 prio:4;
570 u8 attr:3;
572 u8 efb_prio_attr;
575 u8 _r_b;
577 u8 add_cdb_len:6;
578 u8 _r_c:2;
580 u8 cdb[16];
581 u8 add_cdb[];
582 } __attribute__ ((packed));
584 struct xfer_rdy_iu {
585 __be32 requested_offset;
586 __be32 write_data_len;
587 __be32 _r_a;
588 } __attribute__ ((packed));
590 struct ssp_tmf_iu {
591 u8 lun[8];
592 u16 _r_a;
593 u8 tmf;
594 u8 _r_b;
595 __be16 tag;
596 u8 _r_c[14];
597 } __attribute__ ((packed));
599 /* ---------- SMP ---------- */
601 struct report_general_resp {
602 __be16 change_count;
603 __be16 route_indexes;
604 u8 _r_a;
605 u8 num_phys;
607 u8 t2t_supp:1;
608 u8 zone_config:1;
609 u8 self_config:1;
610 u8 stp_cont_awt:1;
611 u8 orej_retry_supp:1;
612 u8 config_others:1;
613 u8 configuring:1;
614 u8 conf_route_table:1;
616 u8 _r_c;
618 u8 enclosure_logical_id[8];
620 u8 _r_d[12];
621 } __attribute__ ((packed));
623 struct discover_resp {
624 u8 _r_a[5];
626 u8 phy_id;
627 __be16 _r_b;
629 u8 _r_d:1;
630 u8 attached_dev_type:3;
631 u8 _r_c:4;
633 u8 _r_e:4;
634 u8 linkrate:4;
636 u8 _r_f:4;
637 u8 iproto:3;
638 u8 attached_sata_host:1;
640 u8 attached_sata_ps:1;
641 u8 _r_g:3;
642 u8 tproto:3;
643 u8 attached_sata_dev:1;
645 u8 sas_addr[8];
646 u8 attached_sas_addr[8];
647 u8 attached_phy_id;
649 u8 _r_h[7];
651 u8 pmin_linkrate:4;
652 u8 hmin_linkrate:4;
653 u8 pmax_linkrate:4;
654 u8 hmax_linkrate:4;
656 u8 change_count;
658 u8 virtual:1;
659 u8 _r_i:3;
660 u8 pptv:4;
662 u8 _r_j:4;
663 u8 routing_attr:4;
665 u8 conn_type;
666 u8 conn_el_index;
667 u8 conn_phy_link;
669 u8 _r_k[8];
670 } __attribute__ ((packed));
672 struct report_phy_sata_resp {
673 u8 _r_a[5];
675 u8 phy_id;
676 u8 _r_b;
678 u8 _r_c:6;
679 u8 affil_supp:1;
680 u8 affil_valid:1;
682 u32 _r_d;
684 u8 stp_sas_addr[8];
686 struct dev_to_host_fis fis;
688 u32 _r_e;
690 u8 affil_stp_ini_addr[8];
692 __be32 crc;
693 } __attribute__ ((packed));
695 #else
696 #error "Bitfield order not defined!"
697 #endif
699 struct smp_rg_resp {
700 u8 frame_type;
701 u8 function;
702 u8 result;
703 u8 reserved;
704 struct report_general_resp rg;
705 } __attribute__ ((packed));
707 struct smp_disc_resp {
708 u8 frame_type;
709 u8 function;
710 u8 result;
711 u8 reserved;
712 struct discover_resp disc;
713 } __attribute__ ((packed));
715 struct smp_rps_resp {
716 u8 frame_type;
717 u8 function;
718 u8 result;
719 u8 reserved;
720 struct report_phy_sata_resp rps;
721 } __attribute__ ((packed));
723 #endif /* _SAS_H_ */