1 // SPDX-License-Identifier: GPL-2.0-only
3 * HID driver for Logitech receivers
5 * Copyright (c) 2011 Logitech
10 #include <linux/device.h>
11 #include <linux/hid.h>
12 #include <linux/module.h>
13 #include <linux/kfifo.h>
14 #include <linux/delay.h>
15 #include <linux/usb.h> /* For to_usb_interface for kvm extra intf check */
16 #include <linux/unaligned.h>
19 #define DJ_MAX_PAIRED_DEVICES 7
20 #define DJ_MAX_NUMBER_NOTIFS 8
21 #define DJ_RECEIVER_INDEX 0
22 #define DJ_DEVICE_INDEX_MIN 1
23 #define DJ_DEVICE_INDEX_MAX 7
25 #define DJREPORT_SHORT_LENGTH 15
26 #define DJREPORT_LONG_LENGTH 32
28 #define REPORT_ID_DJ_SHORT 0x20
29 #define REPORT_ID_DJ_LONG 0x21
31 #define REPORT_ID_HIDPP_SHORT 0x10
32 #define REPORT_ID_HIDPP_LONG 0x11
33 #define REPORT_ID_HIDPP_VERY_LONG 0x12
35 #define HIDPP_REPORT_SHORT_LENGTH 7
36 #define HIDPP_REPORT_LONG_LENGTH 20
38 #define HIDPP_RECEIVER_INDEX 0xff
40 #define REPORT_TYPE_RFREPORT_FIRST 0x01
41 #define REPORT_TYPE_RFREPORT_LAST 0x1F
43 /* Command Switch to DJ mode */
44 #define REPORT_TYPE_CMD_SWITCH 0x80
45 #define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
46 #define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01
47 #define TIMEOUT_NO_KEEPALIVE 0x00
49 /* Command to Get the list of Paired devices */
50 #define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81
52 /* Device Paired Notification */
53 #define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41
54 #define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01
55 #define SPFUNCTION_DEVICE_LIST_EMPTY 0x02
56 #define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
57 #define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01
58 #define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02
59 #define DEVICE_PAIRED_RF_REPORT_TYPE 0x03
61 /* Device Un-Paired Notification */
62 #define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40
64 /* Connection Status Notification */
65 #define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42
66 #define CONNECTION_STATUS_PARAM_STATUS 0x00
67 #define STATUS_LINKLOSS 0x01
69 /* Error Notification */
70 #define REPORT_TYPE_NOTIF_ERROR 0x7F
71 #define NOTIF_ERROR_PARAM_ETYPE 0x00
72 #define ETYPE_KEEPALIVE_TIMEOUT 0x01
74 /* supported DJ HID && RF report types */
75 #define REPORT_TYPE_KEYBOARD 0x01
76 #define REPORT_TYPE_MOUSE 0x02
77 #define REPORT_TYPE_CONSUMER_CONTROL 0x03
78 #define REPORT_TYPE_SYSTEM_CONTROL 0x04
79 #define REPORT_TYPE_MEDIA_CENTER 0x08
80 #define REPORT_TYPE_LEDS 0x0E
82 /* RF Report types bitfield */
83 #define STD_KEYBOARD BIT(1)
84 #define STD_MOUSE BIT(2)
85 #define MULTIMEDIA BIT(3)
86 #define POWER_KEYS BIT(4)
87 #define KBD_MOUSE BIT(5)
88 #define MEDIA_CENTER BIT(8)
89 #define KBD_LEDS BIT(14)
90 /* Fake (bitnr > NUMBER_OF_HID_REPORTS) bit to track HID++ capability */
91 #define HIDPP BIT_ULL(63)
93 /* HID++ Device Connected Notification */
94 #define REPORT_TYPE_NOTIF_DEVICE_CONNECTED 0x41
95 #define HIDPP_PARAM_PROTO_TYPE 0x00
96 #define HIDPP_PARAM_DEVICE_INFO 0x01
97 #define HIDPP_PARAM_EQUAD_LSB 0x02
98 #define HIDPP_PARAM_EQUAD_MSB 0x03
99 #define HIDPP_PARAM_27MHZ_DEVID 0x03
100 #define HIDPP_DEVICE_TYPE_MASK GENMASK(3, 0)
101 #define HIDPP_LINK_STATUS_MASK BIT(6)
102 #define HIDPP_MANUFACTURER_MASK BIT(7)
103 #define HIDPP_27MHZ_SECURE_MASK BIT(7)
105 #define HIDPP_DEVICE_TYPE_KEYBOARD 1
106 #define HIDPP_DEVICE_TYPE_MOUSE 2
108 #define HIDPP_SET_REGISTER 0x80
109 #define HIDPP_GET_LONG_REGISTER 0x83
110 #define HIDPP_REG_CONNECTION_STATE 0x02
111 #define HIDPP_REG_PAIRING_INFORMATION 0xB5
112 #define HIDPP_PAIRING_INFORMATION 0x20
113 #define HIDPP_FAKE_DEVICE_ARRIVAL 0x02
118 recvr_type_gaming_hidpp
,
119 recvr_type_mouse_only
,
121 recvr_type_bluetooth
,
129 u8 report_params
[DJREPORT_SHORT_LENGTH
- 3];
136 u8 params
[HIDPP_REPORT_LONG_LENGTH
- 3U];
139 struct dj_receiver_dev
{
140 struct hid_device
*mouse
;
141 struct hid_device
*keyboard
;
142 struct hid_device
*hidpp
;
143 struct dj_device
*paired_dj_devices
[DJ_MAX_PAIRED_DEVICES
+
144 DJ_DEVICE_INDEX_MIN
];
145 struct list_head list
;
147 struct work_struct work
;
148 struct kfifo notif_fifo
;
149 unsigned long last_query
; /* in jiffies */
151 enum recvr_type type
;
152 unsigned int unnumbered_application
;
157 struct hid_device
*hdev
;
158 struct dj_receiver_dev
*dj_receiver_dev
;
159 u64 reports_supported
;
163 #define WORKITEM_TYPE_EMPTY 0
164 #define WORKITEM_TYPE_PAIRED 1
165 #define WORKITEM_TYPE_UNPAIRED 2
166 #define WORKITEM_TYPE_UNKNOWN 255
169 u8 type
; /* WORKITEM_TYPE_* */
174 u64 reports_supported
;
177 /* Keyboard descriptor (1) */
178 static const char kbd_descriptor
[] = {
179 0x05, 0x01, /* USAGE_PAGE (generic Desktop) */
180 0x09, 0x06, /* USAGE (Keyboard) */
181 0xA1, 0x01, /* COLLECTION (Application) */
182 0x85, 0x01, /* REPORT_ID (1) */
183 0x95, 0x08, /* REPORT_COUNT (8) */
184 0x75, 0x01, /* REPORT_SIZE (1) */
185 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
186 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
187 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
188 0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */
189 0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */
190 0x81, 0x02, /* INPUT (Data,Var,Abs) */
191 0x95, 0x06, /* REPORT_COUNT (6) */
192 0x75, 0x08, /* REPORT_SIZE (8) */
193 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
194 0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */
195 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
196 0x19, 0x00, /* USAGE_MINIMUM (no event) */
197 0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */
198 0x81, 0x00, /* INPUT (Data,Ary,Abs) */
199 0x85, 0x0e, /* REPORT_ID (14) */
200 0x05, 0x08, /* USAGE PAGE (LED page) */
201 0x95, 0x05, /* REPORT COUNT (5) */
202 0x75, 0x01, /* REPORT SIZE (1) */
203 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
204 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
205 0x19, 0x01, /* USAGE MINIMUM (1) */
206 0x29, 0x05, /* USAGE MAXIMUM (5) */
207 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
208 0x95, 0x01, /* REPORT COUNT (1) */
209 0x75, 0x03, /* REPORT SIZE (3) */
210 0x91, 0x01, /* OUTPUT (Constant) */
214 /* Mouse descriptor (2) */
215 static const char mse_descriptor
[] = {
216 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
217 0x09, 0x02, /* USAGE (Mouse) */
218 0xA1, 0x01, /* COLLECTION (Application) */
219 0x85, 0x02, /* REPORT_ID = 2 */
220 0x09, 0x01, /* USAGE (pointer) */
221 0xA1, 0x00, /* COLLECTION (physical) */
222 0x05, 0x09, /* USAGE_PAGE (buttons) */
223 0x19, 0x01, /* USAGE_MIN (1) */
224 0x29, 0x10, /* USAGE_MAX (16) */
225 0x15, 0x00, /* LOGICAL_MIN (0) */
226 0x25, 0x01, /* LOGICAL_MAX (1) */
227 0x95, 0x10, /* REPORT_COUNT (16) */
228 0x75, 0x01, /* REPORT_SIZE (1) */
229 0x81, 0x02, /* INPUT (data var abs) */
230 0x05, 0x01, /* USAGE_PAGE (generic desktop) */
231 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
232 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
233 0x75, 0x0C, /* REPORT_SIZE (12) */
234 0x95, 0x02, /* REPORT_COUNT (2) */
235 0x09, 0x30, /* USAGE (X) */
236 0x09, 0x31, /* USAGE (Y) */
237 0x81, 0x06, /* INPUT */
238 0x15, 0x81, /* LOGICAL_MIN (-127) */
239 0x25, 0x7F, /* LOGICAL_MAX (127) */
240 0x75, 0x08, /* REPORT_SIZE (8) */
241 0x95, 0x01, /* REPORT_COUNT (1) */
242 0x09, 0x38, /* USAGE (wheel) */
243 0x81, 0x06, /* INPUT */
244 0x05, 0x0C, /* USAGE_PAGE(consumer) */
245 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
246 0x95, 0x01, /* REPORT_COUNT (1) */
247 0x81, 0x06, /* INPUT */
248 0xC0, /* END_COLLECTION */
249 0xC0, /* END_COLLECTION */
252 /* Mouse descriptor (2) for 27 MHz receiver, only 8 buttons */
253 static const char mse_27mhz_descriptor
[] = {
254 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
255 0x09, 0x02, /* USAGE (Mouse) */
256 0xA1, 0x01, /* COLLECTION (Application) */
257 0x85, 0x02, /* REPORT_ID = 2 */
258 0x09, 0x01, /* USAGE (pointer) */
259 0xA1, 0x00, /* COLLECTION (physical) */
260 0x05, 0x09, /* USAGE_PAGE (buttons) */
261 0x19, 0x01, /* USAGE_MIN (1) */
262 0x29, 0x08, /* USAGE_MAX (8) */
263 0x15, 0x00, /* LOGICAL_MIN (0) */
264 0x25, 0x01, /* LOGICAL_MAX (1) */
265 0x95, 0x08, /* REPORT_COUNT (8) */
266 0x75, 0x01, /* REPORT_SIZE (1) */
267 0x81, 0x02, /* INPUT (data var abs) */
268 0x05, 0x01, /* USAGE_PAGE (generic desktop) */
269 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
270 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
271 0x75, 0x0C, /* REPORT_SIZE (12) */
272 0x95, 0x02, /* REPORT_COUNT (2) */
273 0x09, 0x30, /* USAGE (X) */
274 0x09, 0x31, /* USAGE (Y) */
275 0x81, 0x06, /* INPUT */
276 0x15, 0x81, /* LOGICAL_MIN (-127) */
277 0x25, 0x7F, /* LOGICAL_MAX (127) */
278 0x75, 0x08, /* REPORT_SIZE (8) */
279 0x95, 0x01, /* REPORT_COUNT (1) */
280 0x09, 0x38, /* USAGE (wheel) */
281 0x81, 0x06, /* INPUT */
282 0x05, 0x0C, /* USAGE_PAGE(consumer) */
283 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
284 0x95, 0x01, /* REPORT_COUNT (1) */
285 0x81, 0x06, /* INPUT */
286 0xC0, /* END_COLLECTION */
287 0xC0, /* END_COLLECTION */
290 /* Mouse descriptor (2) for Bluetooth receiver, low-res hwheel, 12 buttons */
291 static const char mse_bluetooth_descriptor
[] = {
292 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
293 0x09, 0x02, /* USAGE (Mouse) */
294 0xA1, 0x01, /* COLLECTION (Application) */
295 0x85, 0x02, /* REPORT_ID = 2 */
296 0x09, 0x01, /* USAGE (pointer) */
297 0xA1, 0x00, /* COLLECTION (physical) */
298 0x05, 0x09, /* USAGE_PAGE (buttons) */
299 0x19, 0x01, /* USAGE_MIN (1) */
300 0x29, 0x08, /* USAGE_MAX (8) */
301 0x15, 0x00, /* LOGICAL_MIN (0) */
302 0x25, 0x01, /* LOGICAL_MAX (1) */
303 0x95, 0x08, /* REPORT_COUNT (8) */
304 0x75, 0x01, /* REPORT_SIZE (1) */
305 0x81, 0x02, /* INPUT (data var abs) */
306 0x05, 0x01, /* USAGE_PAGE (generic desktop) */
307 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
308 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
309 0x75, 0x0C, /* REPORT_SIZE (12) */
310 0x95, 0x02, /* REPORT_COUNT (2) */
311 0x09, 0x30, /* USAGE (X) */
312 0x09, 0x31, /* USAGE (Y) */
313 0x81, 0x06, /* INPUT */
314 0x15, 0x81, /* LOGICAL_MIN (-127) */
315 0x25, 0x7F, /* LOGICAL_MAX (127) */
316 0x75, 0x08, /* REPORT_SIZE (8) */
317 0x95, 0x01, /* REPORT_COUNT (1) */
318 0x09, 0x38, /* USAGE (wheel) */
319 0x81, 0x06, /* INPUT */
320 0x05, 0x0C, /* USAGE_PAGE(consumer) */
321 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
322 0x15, 0xF9, /* LOGICAL_MIN (-7) */
323 0x25, 0x07, /* LOGICAL_MAX (7) */
324 0x75, 0x04, /* REPORT_SIZE (4) */
325 0x95, 0x01, /* REPORT_COUNT (1) */
326 0x81, 0x06, /* INPUT */
327 0x05, 0x09, /* USAGE_PAGE (buttons) */
328 0x19, 0x09, /* USAGE_MIN (9) */
329 0x29, 0x0C, /* USAGE_MAX (12) */
330 0x15, 0x00, /* LOGICAL_MIN (0) */
331 0x25, 0x01, /* LOGICAL_MAX (1) */
332 0x75, 0x01, /* REPORT_SIZE (1) */
333 0x95, 0x04, /* REPORT_COUNT (4) */
334 0x81, 0x02, /* INPUT (Data,Var,Abs) */
335 0xC0, /* END_COLLECTION */
336 0xC0, /* END_COLLECTION */
339 /* Mouse descriptor (5) for Bluetooth receiver, normal-res hwheel, 8 buttons */
340 static const char mse5_bluetooth_descriptor
[] = {
341 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
342 0x09, 0x02, /* Usage (Mouse) */
343 0xa1, 0x01, /* Collection (Application) */
344 0x85, 0x05, /* Report ID (5) */
345 0x09, 0x01, /* Usage (Pointer) */
346 0xa1, 0x00, /* Collection (Physical) */
347 0x05, 0x09, /* Usage Page (Button) */
348 0x19, 0x01, /* Usage Minimum (1) */
349 0x29, 0x08, /* Usage Maximum (8) */
350 0x15, 0x00, /* Logical Minimum (0) */
351 0x25, 0x01, /* Logical Maximum (1) */
352 0x95, 0x08, /* Report Count (8) */
353 0x75, 0x01, /* Report Size (1) */
354 0x81, 0x02, /* Input (Data,Var,Abs) */
355 0x05, 0x01, /* Usage Page (Generic Desktop) */
356 0x16, 0x01, 0xf8, /* Logical Minimum (-2047) */
357 0x26, 0xff, 0x07, /* Logical Maximum (2047) */
358 0x75, 0x0c, /* Report Size (12) */
359 0x95, 0x02, /* Report Count (2) */
360 0x09, 0x30, /* Usage (X) */
361 0x09, 0x31, /* Usage (Y) */
362 0x81, 0x06, /* Input (Data,Var,Rel) */
363 0x15, 0x81, /* Logical Minimum (-127) */
364 0x25, 0x7f, /* Logical Maximum (127) */
365 0x75, 0x08, /* Report Size (8) */
366 0x95, 0x01, /* Report Count (1) */
367 0x09, 0x38, /* Usage (Wheel) */
368 0x81, 0x06, /* Input (Data,Var,Rel) */
369 0x05, 0x0c, /* Usage Page (Consumer Devices) */
370 0x0a, 0x38, 0x02, /* Usage (AC Pan) */
371 0x15, 0x81, /* Logical Minimum (-127) */
372 0x25, 0x7f, /* Logical Maximum (127) */
373 0x75, 0x08, /* Report Size (8) */
374 0x95, 0x01, /* Report Count (1) */
375 0x81, 0x06, /* Input (Data,Var,Rel) */
376 0xc0, /* End Collection */
377 0xc0, /* End Collection */
380 /* Gaming Mouse descriptor (2) */
381 static const char mse_high_res_descriptor
[] = {
382 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
383 0x09, 0x02, /* USAGE (Mouse) */
384 0xA1, 0x01, /* COLLECTION (Application) */
385 0x85, 0x02, /* REPORT_ID = 2 */
386 0x09, 0x01, /* USAGE (pointer) */
387 0xA1, 0x00, /* COLLECTION (physical) */
388 0x05, 0x09, /* USAGE_PAGE (buttons) */
389 0x19, 0x01, /* USAGE_MIN (1) */
390 0x29, 0x10, /* USAGE_MAX (16) */
391 0x15, 0x00, /* LOGICAL_MIN (0) */
392 0x25, 0x01, /* LOGICAL_MAX (1) */
393 0x95, 0x10, /* REPORT_COUNT (16) */
394 0x75, 0x01, /* REPORT_SIZE (1) */
395 0x81, 0x02, /* INPUT (data var abs) */
396 0x05, 0x01, /* USAGE_PAGE (generic desktop) */
397 0x16, 0x01, 0x80, /* LOGICAL_MIN (-32767) */
398 0x26, 0xFF, 0x7F, /* LOGICAL_MAX (32767) */
399 0x75, 0x10, /* REPORT_SIZE (16) */
400 0x95, 0x02, /* REPORT_COUNT (2) */
401 0x09, 0x30, /* USAGE (X) */
402 0x09, 0x31, /* USAGE (Y) */
403 0x81, 0x06, /* INPUT */
404 0x15, 0x81, /* LOGICAL_MIN (-127) */
405 0x25, 0x7F, /* LOGICAL_MAX (127) */
406 0x75, 0x08, /* REPORT_SIZE (8) */
407 0x95, 0x01, /* REPORT_COUNT (1) */
408 0x09, 0x38, /* USAGE (wheel) */
409 0x81, 0x06, /* INPUT */
410 0x05, 0x0C, /* USAGE_PAGE(consumer) */
411 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
412 0x95, 0x01, /* REPORT_COUNT (1) */
413 0x81, 0x06, /* INPUT */
414 0xC0, /* END_COLLECTION */
415 0xC0, /* END_COLLECTION */
418 /* Consumer Control descriptor (3) */
419 static const char consumer_descriptor
[] = {
420 0x05, 0x0C, /* USAGE_PAGE (Consumer Devices) */
421 0x09, 0x01, /* USAGE (Consumer Control) */
422 0xA1, 0x01, /* COLLECTION (Application) */
423 0x85, 0x03, /* REPORT_ID = 3 */
424 0x75, 0x10, /* REPORT_SIZE (16) */
425 0x95, 0x02, /* REPORT_COUNT (2) */
426 0x15, 0x01, /* LOGICAL_MIN (1) */
427 0x26, 0xFF, 0x02, /* LOGICAL_MAX (767) */
428 0x19, 0x01, /* USAGE_MIN (1) */
429 0x2A, 0xFF, 0x02, /* USAGE_MAX (767) */
430 0x81, 0x00, /* INPUT (Data Ary Abs) */
431 0xC0, /* END_COLLECTION */
434 /* System control descriptor (4) */
435 static const char syscontrol_descriptor
[] = {
436 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
437 0x09, 0x80, /* USAGE (System Control) */
438 0xA1, 0x01, /* COLLECTION (Application) */
439 0x85, 0x04, /* REPORT_ID = 4 */
440 0x75, 0x02, /* REPORT_SIZE (2) */
441 0x95, 0x01, /* REPORT_COUNT (1) */
442 0x15, 0x01, /* LOGICAL_MIN (1) */
443 0x25, 0x03, /* LOGICAL_MAX (3) */
444 0x09, 0x82, /* USAGE (System Sleep) */
445 0x09, 0x81, /* USAGE (System Power Down) */
446 0x09, 0x83, /* USAGE (System Wake Up) */
447 0x81, 0x60, /* INPUT (Data Ary Abs NPrf Null) */
448 0x75, 0x06, /* REPORT_SIZE (6) */
449 0x81, 0x03, /* INPUT (Cnst Var Abs) */
450 0xC0, /* END_COLLECTION */
453 /* Media descriptor (8) */
454 static const char media_descriptor
[] = {
455 0x06, 0xbc, 0xff, /* Usage Page 0xffbc */
456 0x09, 0x88, /* Usage 0x0088 */
457 0xa1, 0x01, /* BeginCollection */
458 0x85, 0x08, /* Report ID 8 */
459 0x19, 0x01, /* Usage Min 0x0001 */
460 0x29, 0xff, /* Usage Max 0x00ff */
461 0x15, 0x01, /* Logical Min 1 */
462 0x26, 0xff, 0x00, /* Logical Max 255 */
463 0x75, 0x08, /* Report Size 8 */
464 0x95, 0x01, /* Report Count 1 */
465 0x81, 0x00, /* Input */
466 0xc0, /* EndCollection */
469 /* HIDPP descriptor */
470 static const char hidpp_descriptor
[] = {
471 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
472 0x09, 0x01, /* Usage (Vendor Usage 1) */
473 0xa1, 0x01, /* Collection (Application) */
474 0x85, 0x10, /* Report ID (16) */
475 0x75, 0x08, /* Report Size (8) */
476 0x95, 0x06, /* Report Count (6) */
477 0x15, 0x00, /* Logical Minimum (0) */
478 0x26, 0xff, 0x00, /* Logical Maximum (255) */
479 0x09, 0x01, /* Usage (Vendor Usage 1) */
480 0x81, 0x00, /* Input (Data,Arr,Abs) */
481 0x09, 0x01, /* Usage (Vendor Usage 1) */
482 0x91, 0x00, /* Output (Data,Arr,Abs) */
483 0xc0, /* End Collection */
484 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
485 0x09, 0x02, /* Usage (Vendor Usage 2) */
486 0xa1, 0x01, /* Collection (Application) */
487 0x85, 0x11, /* Report ID (17) */
488 0x75, 0x08, /* Report Size (8) */
489 0x95, 0x13, /* Report Count (19) */
490 0x15, 0x00, /* Logical Minimum (0) */
491 0x26, 0xff, 0x00, /* Logical Maximum (255) */
492 0x09, 0x02, /* Usage (Vendor Usage 2) */
493 0x81, 0x00, /* Input (Data,Arr,Abs) */
494 0x09, 0x02, /* Usage (Vendor Usage 2) */
495 0x91, 0x00, /* Output (Data,Arr,Abs) */
496 0xc0, /* End Collection */
497 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
498 0x09, 0x04, /* Usage (Vendor Usage 0x04) */
499 0xa1, 0x01, /* Collection (Application) */
500 0x85, 0x20, /* Report ID (32) */
501 0x75, 0x08, /* Report Size (8) */
502 0x95, 0x0e, /* Report Count (14) */
503 0x15, 0x00, /* Logical Minimum (0) */
504 0x26, 0xff, 0x00, /* Logical Maximum (255) */
505 0x09, 0x41, /* Usage (Vendor Usage 0x41) */
506 0x81, 0x00, /* Input (Data,Arr,Abs) */
507 0x09, 0x41, /* Usage (Vendor Usage 0x41) */
508 0x91, 0x00, /* Output (Data,Arr,Abs) */
509 0x85, 0x21, /* Report ID (33) */
510 0x95, 0x1f, /* Report Count (31) */
511 0x15, 0x00, /* Logical Minimum (0) */
512 0x26, 0xff, 0x00, /* Logical Maximum (255) */
513 0x09, 0x42, /* Usage (Vendor Usage 0x42) */
514 0x81, 0x00, /* Input (Data,Arr,Abs) */
515 0x09, 0x42, /* Usage (Vendor Usage 0x42) */
516 0x91, 0x00, /* Output (Data,Arr,Abs) */
517 0xc0, /* End Collection */
520 /* Maximum size of all defined hid reports in bytes (including report id) */
521 #define MAX_REPORT_SIZE 8
523 /* Make sure all descriptors are present here */
524 #define MAX_RDESC_SIZE \
525 (sizeof(kbd_descriptor) + \
526 sizeof(mse_bluetooth_descriptor) + \
527 sizeof(mse5_bluetooth_descriptor) + \
528 sizeof(consumer_descriptor) + \
529 sizeof(syscontrol_descriptor) + \
530 sizeof(media_descriptor) + \
531 sizeof(hidpp_descriptor))
533 /* Number of possible hid report types that can be created by this driver.
535 * Right now, RF report types have the same report types (or report id's)
536 * than the hid report created from those RF reports. In the future
537 * this doesnt have to be true.
539 * For instance, RF report type 0x01 which has a size of 8 bytes, corresponds
540 * to hid report id 0x01, this is standard keyboard. Same thing applies to mice
541 * reports and consumer control, etc. If a new RF report is created, it doesn't
542 * has to have the same report id as its corresponding hid report, so an
543 * translation may have to take place for future report types.
545 #define NUMBER_OF_HID_REPORTS 32
546 static const u8 hid_reportid_size_map
[NUMBER_OF_HID_REPORTS
] = {
547 [1] = 8, /* Standard keyboard */
548 [2] = 8, /* Standard mouse */
549 [3] = 5, /* Consumer control */
550 [4] = 2, /* System control */
551 [8] = 2, /* Media Center */
555 #define LOGITECH_DJ_INTERFACE_NUMBER 0x02
557 static const struct hid_ll_driver logi_dj_ll_driver
;
559 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev
*djrcv_dev
);
560 static void delayedwork_callback(struct work_struct
*work
);
562 static LIST_HEAD(dj_hdev_list
);
563 static DEFINE_MUTEX(dj_hdev_list_lock
);
565 static bool recvr_type_is_bluetooth(enum recvr_type type
)
567 return type
== recvr_type_bluetooth
|| type
== recvr_type_dinovo
;
571 * dj/HID++ receivers are really a single logical entity, but for BIOS/Windows
572 * compatibility they have multiple USB interfaces. On HID++ receivers we need
573 * to listen for input reports on both interfaces. The functions below are used
574 * to create a single struct dj_receiver_dev for all interfaces belonging to
575 * a single USB-device / receiver.
577 static struct dj_receiver_dev
*dj_find_receiver_dev(struct hid_device
*hdev
,
578 enum recvr_type type
)
580 struct dj_receiver_dev
*djrcv_dev
;
584 * The bluetooth receiver contains a built-in hub and has separate
585 * USB-devices for the keyboard and mouse interfaces.
587 sep
= recvr_type_is_bluetooth(type
) ? '.' : '/';
589 /* Try to find an already-probed interface from the same device */
590 list_for_each_entry(djrcv_dev
, &dj_hdev_list
, list
) {
591 if (djrcv_dev
->mouse
&&
592 hid_compare_device_paths(hdev
, djrcv_dev
->mouse
, sep
)) {
593 kref_get(&djrcv_dev
->kref
);
596 if (djrcv_dev
->keyboard
&&
597 hid_compare_device_paths(hdev
, djrcv_dev
->keyboard
, sep
)) {
598 kref_get(&djrcv_dev
->kref
);
601 if (djrcv_dev
->hidpp
&&
602 hid_compare_device_paths(hdev
, djrcv_dev
->hidpp
, sep
)) {
603 kref_get(&djrcv_dev
->kref
);
611 static void dj_release_receiver_dev(struct kref
*kref
)
613 struct dj_receiver_dev
*djrcv_dev
= container_of(kref
, struct dj_receiver_dev
, kref
);
615 list_del(&djrcv_dev
->list
);
616 kfifo_free(&djrcv_dev
->notif_fifo
);
620 static void dj_put_receiver_dev(struct hid_device
*hdev
)
622 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
624 mutex_lock(&dj_hdev_list_lock
);
626 if (djrcv_dev
->mouse
== hdev
)
627 djrcv_dev
->mouse
= NULL
;
628 if (djrcv_dev
->keyboard
== hdev
)
629 djrcv_dev
->keyboard
= NULL
;
630 if (djrcv_dev
->hidpp
== hdev
)
631 djrcv_dev
->hidpp
= NULL
;
633 kref_put(&djrcv_dev
->kref
, dj_release_receiver_dev
);
635 mutex_unlock(&dj_hdev_list_lock
);
638 static struct dj_receiver_dev
*dj_get_receiver_dev(struct hid_device
*hdev
,
639 enum recvr_type type
,
640 unsigned int application
,
643 struct dj_receiver_dev
*djrcv_dev
;
645 mutex_lock(&dj_hdev_list_lock
);
647 djrcv_dev
= dj_find_receiver_dev(hdev
, type
);
649 djrcv_dev
= kzalloc(sizeof(*djrcv_dev
), GFP_KERNEL
);
653 INIT_WORK(&djrcv_dev
->work
, delayedwork_callback
);
654 spin_lock_init(&djrcv_dev
->lock
);
655 if (kfifo_alloc(&djrcv_dev
->notif_fifo
,
656 DJ_MAX_NUMBER_NOTIFS
* sizeof(struct dj_workitem
),
662 kref_init(&djrcv_dev
->kref
);
663 list_add_tail(&djrcv_dev
->list
, &dj_hdev_list
);
664 djrcv_dev
->last_query
= jiffies
;
665 djrcv_dev
->type
= type
;
668 if (application
== HID_GD_KEYBOARD
)
669 djrcv_dev
->keyboard
= hdev
;
670 if (application
== HID_GD_MOUSE
)
671 djrcv_dev
->mouse
= hdev
;
673 djrcv_dev
->hidpp
= hdev
;
675 hid_set_drvdata(hdev
, djrcv_dev
);
677 mutex_unlock(&dj_hdev_list_lock
);
681 static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev
*djrcv_dev
,
682 struct dj_workitem
*workitem
)
684 /* Called in delayed work context */
685 struct dj_device
*dj_dev
;
688 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
689 dj_dev
= djrcv_dev
->paired_dj_devices
[workitem
->device_index
];
690 djrcv_dev
->paired_dj_devices
[workitem
->device_index
] = NULL
;
691 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
693 if (dj_dev
!= NULL
) {
694 hid_destroy_device(dj_dev
->hdev
);
697 hid_err(djrcv_dev
->hidpp
, "%s: can't destroy a NULL device\n",
702 static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev
*djrcv_dev
,
703 struct dj_workitem
*workitem
)
705 /* Called in delayed work context */
706 struct hid_device
*djrcv_hdev
= djrcv_dev
->hidpp
;
707 struct hid_device
*dj_hiddev
;
708 struct dj_device
*dj_dev
;
709 u8 device_index
= workitem
->device_index
;
712 /* Device index goes from 1 to 6, we need 3 bytes to store the
713 * semicolon, the index, and a null terminator
715 unsigned char tmpstr
[3];
717 /* We are the only one ever adding a device, no need to lock */
718 if (djrcv_dev
->paired_dj_devices
[device_index
]) {
719 /* The device is already known. No need to reallocate it. */
720 dbg_hid("%s: device is already known\n", __func__
);
724 dj_hiddev
= hid_allocate_device();
725 if (IS_ERR(dj_hiddev
)) {
726 hid_err(djrcv_hdev
, "%s: hid_allocate_dev failed\n", __func__
);
730 dj_hiddev
->ll_driver
= &logi_dj_ll_driver
;
732 dj_hiddev
->dev
.parent
= &djrcv_hdev
->dev
;
733 dj_hiddev
->bus
= BUS_USB
;
734 dj_hiddev
->vendor
= djrcv_hdev
->vendor
;
735 dj_hiddev
->product
= (workitem
->quad_id_msb
<< 8) |
736 workitem
->quad_id_lsb
;
737 if (workitem
->device_type
) {
738 const char *type_str
= "Device";
740 switch (workitem
->device_type
) {
741 case 0x01: type_str
= "Keyboard"; break;
742 case 0x02: type_str
= "Mouse"; break;
743 case 0x03: type_str
= "Numpad"; break;
744 case 0x04: type_str
= "Presenter"; break;
745 case 0x07: type_str
= "Remote Control"; break;
746 case 0x08: type_str
= "Trackball"; break;
747 case 0x09: type_str
= "Touchpad"; break;
749 snprintf(dj_hiddev
->name
, sizeof(dj_hiddev
->name
),
750 "Logitech Wireless %s PID:%04x",
751 type_str
, dj_hiddev
->product
);
753 snprintf(dj_hiddev
->name
, sizeof(dj_hiddev
->name
),
754 "Logitech Wireless Device PID:%04x",
758 if (djrcv_dev
->type
== recvr_type_27mhz
)
759 dj_hiddev
->group
= HID_GROUP_LOGITECH_27MHZ_DEVICE
;
761 dj_hiddev
->group
= HID_GROUP_LOGITECH_DJ_DEVICE
;
763 memcpy(dj_hiddev
->phys
, djrcv_hdev
->phys
, sizeof(djrcv_hdev
->phys
));
764 snprintf(tmpstr
, sizeof(tmpstr
), ":%d", device_index
);
765 strlcat(dj_hiddev
->phys
, tmpstr
, sizeof(dj_hiddev
->phys
));
767 dj_dev
= kzalloc(sizeof(struct dj_device
), GFP_KERNEL
);
770 hid_err(djrcv_hdev
, "%s: failed allocating dj_dev\n", __func__
);
771 goto dj_device_allocate_fail
;
774 dj_dev
->reports_supported
= workitem
->reports_supported
;
775 dj_dev
->hdev
= dj_hiddev
;
776 dj_dev
->dj_receiver_dev
= djrcv_dev
;
777 dj_dev
->device_index
= device_index
;
778 dj_hiddev
->driver_data
= dj_dev
;
780 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
781 djrcv_dev
->paired_dj_devices
[device_index
] = dj_dev
;
782 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
784 if (hid_add_device(dj_hiddev
)) {
785 hid_err(djrcv_hdev
, "%s: failed adding dj_device\n", __func__
);
786 goto hid_add_device_fail
;
792 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
793 djrcv_dev
->paired_dj_devices
[device_index
] = NULL
;
794 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
796 dj_device_allocate_fail
:
797 hid_destroy_device(dj_hiddev
);
800 static void delayedwork_callback(struct work_struct
*work
)
802 struct dj_receiver_dev
*djrcv_dev
=
803 container_of(work
, struct dj_receiver_dev
, work
);
805 struct dj_workitem workitem
;
810 dbg_hid("%s\n", __func__
);
812 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
815 * Since we attach to multiple interfaces, we may get scheduled before
816 * we are bound to the HID++ interface, catch this.
818 if (!djrcv_dev
->ready
) {
819 pr_warn("%s: delayedwork queued before hidpp interface was enumerated\n",
821 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
825 count
= kfifo_out(&djrcv_dev
->notif_fifo
, &workitem
, sizeof(workitem
));
827 if (count
!= sizeof(workitem
)) {
828 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
832 if (!kfifo_is_empty(&djrcv_dev
->notif_fifo
))
833 schedule_work(&djrcv_dev
->work
);
835 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
837 switch (workitem
.type
) {
838 case WORKITEM_TYPE_PAIRED
:
839 logi_dj_recv_add_djhid_device(djrcv_dev
, &workitem
);
841 case WORKITEM_TYPE_UNPAIRED
:
842 logi_dj_recv_destroy_djhid_device(djrcv_dev
, &workitem
);
844 case WORKITEM_TYPE_UNKNOWN
:
845 retval
= logi_dj_recv_query_paired_devices(djrcv_dev
);
847 hid_err(djrcv_dev
->hidpp
, "%s: logi_dj_recv_query_paired_devices error: %d\n",
851 case WORKITEM_TYPE_EMPTY
:
852 dbg_hid("%s: device list is empty\n", __func__
);
858 * Sometimes we receive reports for which we do not have a paired dj_device
859 * associated with the device_index or report-type to forward the report to.
860 * This means that the original "device paired" notification corresponding
861 * to the dj_device never arrived to this driver. Possible reasons for this are:
862 * 1) hid-core discards all packets coming from a device during probe().
863 * 2) if the receiver is plugged into a KVM switch then the pairing reports
864 * are only forwarded to it if the focus is on this PC.
865 * This function deals with this by re-asking the receiver for the list of
866 * connected devices in the delayed work callback.
867 * This function MUST be called with djrcv->lock held.
869 static void logi_dj_recv_queue_unknown_work(struct dj_receiver_dev
*djrcv_dev
)
871 struct dj_workitem workitem
= { .type
= WORKITEM_TYPE_UNKNOWN
};
873 /* Rate limit queries done because of unhandled reports to 2/sec */
874 if (time_before(jiffies
, djrcv_dev
->last_query
+ HZ
/ 2))
877 kfifo_in(&djrcv_dev
->notif_fifo
, &workitem
, sizeof(workitem
));
878 schedule_work(&djrcv_dev
->work
);
881 static void logi_dj_recv_queue_notification(struct dj_receiver_dev
*djrcv_dev
,
882 struct dj_report
*dj_report
)
884 /* We are called from atomic context (tasklet && djrcv->lock held) */
885 struct dj_workitem workitem
= {
886 .device_index
= dj_report
->device_index
,
889 switch (dj_report
->report_type
) {
890 case REPORT_TYPE_NOTIF_DEVICE_PAIRED
:
891 workitem
.type
= WORKITEM_TYPE_PAIRED
;
892 if (dj_report
->report_params
[DEVICE_PAIRED_PARAM_SPFUNCTION
] &
893 SPFUNCTION_DEVICE_LIST_EMPTY
) {
894 workitem
.type
= WORKITEM_TYPE_EMPTY
;
898 case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED
:
899 workitem
.quad_id_msb
=
900 dj_report
->report_params
[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB
];
901 workitem
.quad_id_lsb
=
902 dj_report
->report_params
[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB
];
903 workitem
.reports_supported
= get_unaligned_le32(
904 dj_report
->report_params
+
905 DEVICE_PAIRED_RF_REPORT_TYPE
);
906 workitem
.reports_supported
|= HIDPP
;
907 if (dj_report
->report_type
== REPORT_TYPE_NOTIF_DEVICE_UNPAIRED
)
908 workitem
.type
= WORKITEM_TYPE_UNPAIRED
;
911 logi_dj_recv_queue_unknown_work(djrcv_dev
);
915 kfifo_in(&djrcv_dev
->notif_fifo
, &workitem
, sizeof(workitem
));
916 schedule_work(&djrcv_dev
->work
);
920 * Some quad/bluetooth keyboards have a builtin touchpad in this case we see
921 * only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. For the
922 * touchpad to work we must also forward mouse input reports to the dj_hiddev
923 * created for the keyboard (instead of forwarding them to a second paired
924 * device with a device_type of REPORT_TYPE_MOUSE as we normally would).
926 * On Dinovo receivers the keyboard's touchpad and an optional paired actual
927 * mouse send separate input reports, INPUT(2) aka STD_MOUSE for the mouse
928 * and INPUT(5) aka KBD_MOUSE for the keyboard's touchpad.
930 * On MX5x00 receivers (which can also be paired with a Dinovo keyboard)
931 * INPUT(2) is used for both an optional paired actual mouse and for the
932 * keyboard's touchpad.
934 static const u16 kbd_builtin_touchpad_ids
[] = {
935 0xb309, /* Dinovo Edge */
936 0xb30c, /* Dinovo Mini */
939 static void logi_hidpp_dev_conn_notif_equad(struct hid_device
*hdev
,
940 struct hidpp_event
*hidpp_report
,
941 struct dj_workitem
*workitem
)
943 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
946 workitem
->type
= WORKITEM_TYPE_PAIRED
;
947 workitem
->device_type
= hidpp_report
->params
[HIDPP_PARAM_DEVICE_INFO
] &
948 HIDPP_DEVICE_TYPE_MASK
;
949 workitem
->quad_id_msb
= hidpp_report
->params
[HIDPP_PARAM_EQUAD_MSB
];
950 workitem
->quad_id_lsb
= hidpp_report
->params
[HIDPP_PARAM_EQUAD_LSB
];
951 switch (workitem
->device_type
) {
952 case REPORT_TYPE_KEYBOARD
:
953 workitem
->reports_supported
|= STD_KEYBOARD
| MULTIMEDIA
|
954 POWER_KEYS
| MEDIA_CENTER
|
956 id
= (workitem
->quad_id_msb
<< 8) | workitem
->quad_id_lsb
;
957 for (i
= 0; i
< ARRAY_SIZE(kbd_builtin_touchpad_ids
); i
++) {
958 if (id
== kbd_builtin_touchpad_ids
[i
]) {
959 if (djrcv_dev
->type
== recvr_type_dinovo
)
960 workitem
->reports_supported
|= KBD_MOUSE
;
962 workitem
->reports_supported
|= STD_MOUSE
;
967 case REPORT_TYPE_MOUSE
:
968 workitem
->reports_supported
|= STD_MOUSE
| HIDPP
| MULTIMEDIA
;
973 static void logi_hidpp_dev_conn_notif_27mhz(struct hid_device
*hdev
,
974 struct hidpp_event
*hidpp_report
,
975 struct dj_workitem
*workitem
)
977 workitem
->type
= WORKITEM_TYPE_PAIRED
;
978 workitem
->quad_id_lsb
= hidpp_report
->params
[HIDPP_PARAM_27MHZ_DEVID
];
979 switch (hidpp_report
->device_index
) {
980 case 1: /* Index 1 is always a mouse */
981 case 2: /* Index 2 is always a mouse */
982 workitem
->device_type
= HIDPP_DEVICE_TYPE_MOUSE
;
983 workitem
->reports_supported
|= STD_MOUSE
| HIDPP
;
985 case 3: /* Index 3 is always the keyboard */
986 if (hidpp_report
->params
[HIDPP_PARAM_DEVICE_INFO
] & HIDPP_27MHZ_SECURE_MASK
) {
987 hid_info(hdev
, "Keyboard connection is encrypted\n");
989 hid_warn(hdev
, "Keyboard events are send over the air in plain-text / unencrypted\n");
990 hid_warn(hdev
, "See: https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup/\n");
993 case 4: /* Index 4 is used for an optional separate numpad */
994 workitem
->device_type
= HIDPP_DEVICE_TYPE_KEYBOARD
;
995 workitem
->reports_supported
|= STD_KEYBOARD
| MULTIMEDIA
|
999 hid_warn(hdev
, "%s: unexpected device-index %d", __func__
,
1000 hidpp_report
->device_index
);
1004 static void logi_hidpp_recv_queue_notif(struct hid_device
*hdev
,
1005 struct hidpp_event
*hidpp_report
)
1007 /* We are called from atomic context (tasklet && djrcv->lock held) */
1008 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1009 const char *device_type
= "UNKNOWN";
1010 struct dj_workitem workitem
= {
1011 .type
= WORKITEM_TYPE_EMPTY
,
1012 .device_index
= hidpp_report
->device_index
,
1015 switch (hidpp_report
->params
[HIDPP_PARAM_PROTO_TYPE
]) {
1017 device_type
= "Bluetooth";
1018 /* Bluetooth connect packet contents is the same as (e)QUAD */
1019 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1020 if (!(hidpp_report
->params
[HIDPP_PARAM_DEVICE_INFO
] &
1021 HIDPP_MANUFACTURER_MASK
)) {
1022 hid_info(hdev
, "Non Logitech device connected on slot %d\n",
1023 hidpp_report
->device_index
);
1024 workitem
.reports_supported
&= ~HIDPP
;
1028 device_type
= "27 Mhz";
1029 logi_hidpp_dev_conn_notif_27mhz(hdev
, hidpp_report
, &workitem
);
1032 device_type
= "QUAD or eQUAD";
1033 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1036 device_type
= "eQUAD step 4 DJ";
1037 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1040 device_type
= "DFU Lite";
1043 device_type
= "eQUAD step 4 Lite";
1044 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1047 device_type
= "eQUAD step 4 Gaming";
1048 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1049 workitem
.reports_supported
|= STD_KEYBOARD
;
1052 device_type
= "eQUAD step 4 for gamepads";
1055 device_type
= "eQUAD nano Lite";
1056 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1059 device_type
= "eQUAD Lightspeed 1";
1060 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1061 workitem
.reports_supported
|= STD_KEYBOARD
;
1064 device_type
= "eQUAD Lightspeed 1.1";
1065 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1066 workitem
.reports_supported
|= STD_KEYBOARD
;
1070 device_type
= "eQUAD Lightspeed 1.2";
1071 logi_hidpp_dev_conn_notif_equad(hdev
, hidpp_report
, &workitem
);
1072 workitem
.reports_supported
|= STD_KEYBOARD
;
1076 /* custom receiver device (eg. powerplay) */
1077 if (hidpp_report
->device_index
== 7) {
1078 workitem
.reports_supported
|= HIDPP
;
1081 if (workitem
.type
== WORKITEM_TYPE_EMPTY
) {
1083 "unusable device of type %s (0x%02x) connected on slot %d",
1085 hidpp_report
->params
[HIDPP_PARAM_PROTO_TYPE
],
1086 hidpp_report
->device_index
);
1090 hid_info(hdev
, "device of type %s (0x%02x) connected on slot %d",
1091 device_type
, hidpp_report
->params
[HIDPP_PARAM_PROTO_TYPE
],
1092 hidpp_report
->device_index
);
1094 kfifo_in(&djrcv_dev
->notif_fifo
, &workitem
, sizeof(workitem
));
1095 schedule_work(&djrcv_dev
->work
);
1098 static void logi_dj_recv_forward_null_report(struct dj_receiver_dev
*djrcv_dev
,
1099 struct dj_report
*dj_report
)
1101 /* We are called from atomic context (tasklet && djrcv->lock held) */
1103 u8 reportbuffer
[MAX_REPORT_SIZE
];
1104 struct dj_device
*djdev
;
1106 djdev
= djrcv_dev
->paired_dj_devices
[dj_report
->device_index
];
1108 memset(reportbuffer
, 0, sizeof(reportbuffer
));
1110 for (i
= 0; i
< NUMBER_OF_HID_REPORTS
; i
++) {
1111 if (djdev
->reports_supported
& (1 << i
)) {
1112 reportbuffer
[0] = i
;
1113 if (hid_input_report(djdev
->hdev
,
1116 hid_reportid_size_map
[i
], 1)) {
1117 dbg_hid("hid_input_report error sending null "
1124 static void logi_dj_recv_forward_dj(struct dj_receiver_dev
*djrcv_dev
,
1125 struct dj_report
*dj_report
)
1127 /* We are called from atomic context (tasklet && djrcv->lock held) */
1128 struct dj_device
*dj_device
;
1130 dj_device
= djrcv_dev
->paired_dj_devices
[dj_report
->device_index
];
1132 if ((dj_report
->report_type
> ARRAY_SIZE(hid_reportid_size_map
) - 1) ||
1133 (hid_reportid_size_map
[dj_report
->report_type
] == 0)) {
1134 dbg_hid("invalid report type:%x\n", dj_report
->report_type
);
1138 if (hid_input_report(dj_device
->hdev
,
1139 HID_INPUT_REPORT
, &dj_report
->report_type
,
1140 hid_reportid_size_map
[dj_report
->report_type
], 1)) {
1141 dbg_hid("hid_input_report error\n");
1145 static void logi_dj_recv_forward_report(struct dj_device
*dj_dev
, u8
*data
,
1148 /* We are called from atomic context (tasklet && djrcv->lock held) */
1149 if (hid_input_report(dj_dev
->hdev
, HID_INPUT_REPORT
, data
, size
, 1))
1150 dbg_hid("hid_input_report error\n");
1153 static void logi_dj_recv_forward_input_report(struct hid_device
*hdev
,
1156 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1157 struct dj_device
*dj_dev
;
1158 unsigned long flags
;
1159 u8 report
= data
[0];
1162 if (report
> REPORT_TYPE_RFREPORT_LAST
) {
1163 hid_err(hdev
, "Unexpected input report number %d\n", report
);
1167 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1168 for (i
= 0; i
< (DJ_MAX_PAIRED_DEVICES
+ DJ_DEVICE_INDEX_MIN
); i
++) {
1169 dj_dev
= djrcv_dev
->paired_dj_devices
[i
];
1170 if (dj_dev
&& (dj_dev
->reports_supported
& BIT(report
))) {
1171 logi_dj_recv_forward_report(dj_dev
, data
, size
);
1172 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1177 logi_dj_recv_queue_unknown_work(djrcv_dev
);
1178 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1180 dbg_hid("No dj-devs handling input report number %d\n", report
);
1183 static int logi_dj_recv_send_report(struct dj_receiver_dev
*djrcv_dev
,
1184 struct dj_report
*dj_report
)
1186 struct hid_device
*hdev
= djrcv_dev
->hidpp
;
1187 struct hid_report
*report
;
1188 struct hid_report_enum
*output_report_enum
;
1189 u8
*data
= (u8
*)(&dj_report
->device_index
);
1192 output_report_enum
= &hdev
->report_enum
[HID_OUTPUT_REPORT
];
1193 report
= output_report_enum
->report_id_hash
[REPORT_ID_DJ_SHORT
];
1196 hid_err(hdev
, "%s: unable to find dj report\n", __func__
);
1200 for (i
= 0; i
< DJREPORT_SHORT_LENGTH
- 1; i
++)
1201 report
->field
[0]->value
[i
] = data
[i
];
1203 hid_hw_request(hdev
, report
, HID_REQ_SET_REPORT
);
1208 static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev
*djrcv_dev
)
1210 static const u8
template[] = {
1211 REPORT_ID_HIDPP_SHORT
,
1212 HIDPP_RECEIVER_INDEX
,
1214 HIDPP_REG_CONNECTION_STATE
,
1215 HIDPP_FAKE_DEVICE_ARRIVAL
,
1221 hidpp_report
= kmemdup(template, sizeof(template), GFP_KERNEL
);
1225 retval
= hid_hw_raw_request(djrcv_dev
->hidpp
,
1226 REPORT_ID_HIDPP_SHORT
,
1227 hidpp_report
, sizeof(template),
1229 HID_REQ_SET_REPORT
);
1231 kfree(hidpp_report
);
1232 return (retval
< 0) ? retval
: 0;
1235 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev
*djrcv_dev
)
1237 struct dj_report
*dj_report
;
1240 djrcv_dev
->last_query
= jiffies
;
1242 if (djrcv_dev
->type
!= recvr_type_dj
)
1243 return logi_dj_recv_query_hidpp_devices(djrcv_dev
);
1245 dj_report
= kzalloc(sizeof(struct dj_report
), GFP_KERNEL
);
1248 dj_report
->report_id
= REPORT_ID_DJ_SHORT
;
1249 dj_report
->device_index
= HIDPP_RECEIVER_INDEX
;
1250 dj_report
->report_type
= REPORT_TYPE_CMD_GET_PAIRED_DEVICES
;
1251 retval
= logi_dj_recv_send_report(djrcv_dev
, dj_report
);
1257 static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev
*djrcv_dev
,
1260 struct hid_device
*hdev
= djrcv_dev
->hidpp
;
1261 struct dj_report
*dj_report
;
1265 dj_report
= kzalloc(sizeof(struct dj_report
), GFP_KERNEL
);
1269 if (djrcv_dev
->type
== recvr_type_dj
) {
1270 dj_report
->report_id
= REPORT_ID_DJ_SHORT
;
1271 dj_report
->device_index
= HIDPP_RECEIVER_INDEX
;
1272 dj_report
->report_type
= REPORT_TYPE_CMD_SWITCH
;
1273 dj_report
->report_params
[CMD_SWITCH_PARAM_DEVBITFIELD
] = 0x3F;
1274 dj_report
->report_params
[CMD_SWITCH_PARAM_TIMEOUT_SECONDS
] =
1277 retval
= logi_dj_recv_send_report(djrcv_dev
, dj_report
);
1280 * Ugly sleep to work around a USB 3.0 bug when the receiver is
1281 * still processing the "switch-to-dj" command while we send an
1283 * 50 msec should gives enough time to the receiver to be ready.
1294 * Magical bits to set up hidpp notifications when the dj devices
1295 * are connected/disconnected.
1297 * We can reuse dj_report because HIDPP_REPORT_SHORT_LENGTH is smaller
1298 * than DJREPORT_SHORT_LENGTH.
1300 buf
= (u8
*)dj_report
;
1302 memset(buf
, 0, HIDPP_REPORT_SHORT_LENGTH
);
1304 buf
[0] = REPORT_ID_HIDPP_SHORT
;
1305 buf
[1] = HIDPP_RECEIVER_INDEX
;
1312 retval
= hid_hw_raw_request(hdev
, REPORT_ID_HIDPP_SHORT
, buf
,
1313 HIDPP_REPORT_SHORT_LENGTH
, HID_OUTPUT_REPORT
,
1314 HID_REQ_SET_REPORT
);
1321 static int logi_dj_ll_open(struct hid_device
*hid
)
1323 dbg_hid("%s: %s\n", __func__
, hid
->phys
);
1328 static void logi_dj_ll_close(struct hid_device
*hid
)
1330 dbg_hid("%s: %s\n", __func__
, hid
->phys
);
1334 * Register 0xB5 is "pairing information". It is solely intended for the
1335 * receiver, so do not overwrite the device index.
1337 static u8 unifying_pairing_query
[] = { REPORT_ID_HIDPP_SHORT
,
1338 HIDPP_RECEIVER_INDEX
,
1339 HIDPP_GET_LONG_REGISTER
,
1340 HIDPP_REG_PAIRING_INFORMATION
};
1341 static u8 unifying_pairing_answer
[] = { REPORT_ID_HIDPP_LONG
,
1342 HIDPP_RECEIVER_INDEX
,
1343 HIDPP_GET_LONG_REGISTER
,
1344 HIDPP_REG_PAIRING_INFORMATION
};
1346 static int logi_dj_ll_raw_request(struct hid_device
*hid
,
1347 unsigned char reportnum
, __u8
*buf
,
1348 size_t count
, unsigned char report_type
,
1351 struct dj_device
*djdev
= hid
->driver_data
;
1352 struct dj_receiver_dev
*djrcv_dev
= djdev
->dj_receiver_dev
;
1356 if ((buf
[0] == REPORT_ID_HIDPP_SHORT
) ||
1357 (buf
[0] == REPORT_ID_HIDPP_LONG
) ||
1358 (buf
[0] == REPORT_ID_HIDPP_VERY_LONG
)) {
1362 /* special case where we should not overwrite
1363 * the device_index */
1364 if (count
== 7 && !memcmp(buf
, unifying_pairing_query
,
1365 sizeof(unifying_pairing_query
)))
1366 buf
[4] = (buf
[4] & 0xf0) | (djdev
->device_index
- 1);
1368 buf
[1] = djdev
->device_index
;
1369 return hid_hw_raw_request(djrcv_dev
->hidpp
, reportnum
, buf
,
1370 count
, report_type
, reqtype
);
1373 if (buf
[0] != REPORT_TYPE_LEDS
)
1376 if (djrcv_dev
->type
!= recvr_type_dj
&& count
>= 2) {
1377 if (!djrcv_dev
->keyboard
) {
1378 hid_warn(hid
, "Received REPORT_TYPE_LEDS request before the keyboard interface was enumerated\n");
1381 /* usbhid overrides the report ID and ignores the first byte */
1382 return hid_hw_raw_request(djrcv_dev
->keyboard
, 0, buf
, count
,
1383 report_type
, reqtype
);
1386 out_buf
= kzalloc(DJREPORT_SHORT_LENGTH
, GFP_ATOMIC
);
1390 if (count
> DJREPORT_SHORT_LENGTH
- 2)
1391 count
= DJREPORT_SHORT_LENGTH
- 2;
1393 out_buf
[0] = REPORT_ID_DJ_SHORT
;
1394 out_buf
[1] = djdev
->device_index
;
1395 memcpy(out_buf
+ 2, buf
, count
);
1397 ret
= hid_hw_raw_request(djrcv_dev
->hidpp
, out_buf
[0], out_buf
,
1398 DJREPORT_SHORT_LENGTH
, report_type
, reqtype
);
1404 static void rdcat(char *rdesc
, unsigned int *rsize
, const char *data
, unsigned int size
)
1406 memcpy(rdesc
+ *rsize
, data
, size
);
1410 static int logi_dj_ll_parse(struct hid_device
*hid
)
1412 struct dj_device
*djdev
= hid
->driver_data
;
1413 unsigned int rsize
= 0;
1417 dbg_hid("%s\n", __func__
);
1419 djdev
->hdev
->version
= 0x0111;
1420 djdev
->hdev
->country
= 0x00;
1422 rdesc
= kmalloc(MAX_RDESC_SIZE
, GFP_KERNEL
);
1426 if (djdev
->reports_supported
& STD_KEYBOARD
) {
1427 dbg_hid("%s: sending a kbd descriptor, reports_supported: %llx\n",
1428 __func__
, djdev
->reports_supported
);
1429 rdcat(rdesc
, &rsize
, kbd_descriptor
, sizeof(kbd_descriptor
));
1432 if (djdev
->reports_supported
& STD_MOUSE
) {
1433 dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n",
1434 __func__
, djdev
->reports_supported
);
1435 if (djdev
->dj_receiver_dev
->type
== recvr_type_gaming_hidpp
||
1436 djdev
->dj_receiver_dev
->type
== recvr_type_mouse_only
)
1437 rdcat(rdesc
, &rsize
, mse_high_res_descriptor
,
1438 sizeof(mse_high_res_descriptor
));
1439 else if (djdev
->dj_receiver_dev
->type
== recvr_type_27mhz
)
1440 rdcat(rdesc
, &rsize
, mse_27mhz_descriptor
,
1441 sizeof(mse_27mhz_descriptor
));
1442 else if (recvr_type_is_bluetooth(djdev
->dj_receiver_dev
->type
))
1443 rdcat(rdesc
, &rsize
, mse_bluetooth_descriptor
,
1444 sizeof(mse_bluetooth_descriptor
));
1446 rdcat(rdesc
, &rsize
, mse_descriptor
,
1447 sizeof(mse_descriptor
));
1450 if (djdev
->reports_supported
& KBD_MOUSE
) {
1451 dbg_hid("%s: sending a kbd-mouse descriptor, reports_supported: %llx\n",
1452 __func__
, djdev
->reports_supported
);
1453 rdcat(rdesc
, &rsize
, mse5_bluetooth_descriptor
,
1454 sizeof(mse5_bluetooth_descriptor
));
1457 if (djdev
->reports_supported
& MULTIMEDIA
) {
1458 dbg_hid("%s: sending a multimedia report descriptor: %llx\n",
1459 __func__
, djdev
->reports_supported
);
1460 rdcat(rdesc
, &rsize
, consumer_descriptor
, sizeof(consumer_descriptor
));
1463 if (djdev
->reports_supported
& POWER_KEYS
) {
1464 dbg_hid("%s: sending a power keys report descriptor: %llx\n",
1465 __func__
, djdev
->reports_supported
);
1466 rdcat(rdesc
, &rsize
, syscontrol_descriptor
, sizeof(syscontrol_descriptor
));
1469 if (djdev
->reports_supported
& MEDIA_CENTER
) {
1470 dbg_hid("%s: sending a media center report descriptor: %llx\n",
1471 __func__
, djdev
->reports_supported
);
1472 rdcat(rdesc
, &rsize
, media_descriptor
, sizeof(media_descriptor
));
1475 if (djdev
->reports_supported
& KBD_LEDS
) {
1476 dbg_hid("%s: need to send kbd leds report descriptor: %llx\n",
1477 __func__
, djdev
->reports_supported
);
1480 if (djdev
->reports_supported
& HIDPP
) {
1481 dbg_hid("%s: sending a HID++ descriptor, reports_supported: %llx\n",
1482 __func__
, djdev
->reports_supported
);
1483 rdcat(rdesc
, &rsize
, hidpp_descriptor
,
1484 sizeof(hidpp_descriptor
));
1487 retval
= hid_parse_report(hid
, rdesc
, rsize
);
1493 static int logi_dj_ll_start(struct hid_device
*hid
)
1495 dbg_hid("%s\n", __func__
);
1499 static void logi_dj_ll_stop(struct hid_device
*hid
)
1501 dbg_hid("%s\n", __func__
);
1504 static bool logi_dj_ll_may_wakeup(struct hid_device
*hid
)
1506 struct dj_device
*djdev
= hid
->driver_data
;
1507 struct dj_receiver_dev
*djrcv_dev
= djdev
->dj_receiver_dev
;
1509 return hid_hw_may_wakeup(djrcv_dev
->hidpp
);
1512 static const struct hid_ll_driver logi_dj_ll_driver
= {
1513 .parse
= logi_dj_ll_parse
,
1514 .start
= logi_dj_ll_start
,
1515 .stop
= logi_dj_ll_stop
,
1516 .open
= logi_dj_ll_open
,
1517 .close
= logi_dj_ll_close
,
1518 .raw_request
= logi_dj_ll_raw_request
,
1519 .may_wakeup
= logi_dj_ll_may_wakeup
,
1522 static int logi_dj_dj_event(struct hid_device
*hdev
,
1523 struct hid_report
*report
, u8
*data
,
1526 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1527 struct dj_report
*dj_report
= (struct dj_report
*) data
;
1528 unsigned long flags
;
1531 * Here we receive all data coming from iface 2, there are 3 cases:
1533 * 1) Data is intended for this driver i. e. data contains arrival,
1534 * departure, etc notifications, in which case we queue them for delayed
1535 * processing by the work queue. We return 1 to hid-core as no further
1536 * processing is required from it.
1538 * 2) Data informs a connection change, if the change means rf link
1539 * loss, then we must send a null report to the upper layer to discard
1540 * potentially pressed keys that may be repeated forever by the input
1541 * layer. Return 1 to hid-core as no further processing is required.
1543 * 3) Data is an actual input event from a paired DJ device in which
1544 * case we forward it to the correct hid device (via hid_input_report()
1545 * ) and return 1 so hid-core does not anything else with it.
1548 if ((dj_report
->device_index
< DJ_DEVICE_INDEX_MIN
) ||
1549 (dj_report
->device_index
> DJ_DEVICE_INDEX_MAX
)) {
1551 * Device index is wrong, bail out.
1552 * This driver can ignore safely the receiver notifications,
1553 * so ignore those reports too.
1555 if (dj_report
->device_index
!= DJ_RECEIVER_INDEX
)
1556 hid_err(hdev
, "%s: invalid device index:%d\n",
1557 __func__
, dj_report
->device_index
);
1561 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1563 if (!djrcv_dev
->paired_dj_devices
[dj_report
->device_index
]) {
1564 /* received an event for an unknown device, bail out */
1565 logi_dj_recv_queue_notification(djrcv_dev
, dj_report
);
1569 switch (dj_report
->report_type
) {
1570 case REPORT_TYPE_NOTIF_DEVICE_PAIRED
:
1571 /* pairing notifications are handled above the switch */
1573 case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED
:
1574 logi_dj_recv_queue_notification(djrcv_dev
, dj_report
);
1576 case REPORT_TYPE_NOTIF_CONNECTION_STATUS
:
1577 if (dj_report
->report_params
[CONNECTION_STATUS_PARAM_STATUS
] ==
1579 logi_dj_recv_forward_null_report(djrcv_dev
, dj_report
);
1583 logi_dj_recv_forward_dj(djrcv_dev
, dj_report
);
1587 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1592 static int logi_dj_hidpp_event(struct hid_device
*hdev
,
1593 struct hid_report
*report
, u8
*data
,
1596 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1597 struct hidpp_event
*hidpp_report
= (struct hidpp_event
*) data
;
1598 struct dj_device
*dj_dev
;
1599 unsigned long flags
;
1600 u8 device_index
= hidpp_report
->device_index
;
1602 if (device_index
== HIDPP_RECEIVER_INDEX
) {
1603 /* special case were the device wants to know its unifying
1605 if (size
== HIDPP_REPORT_LONG_LENGTH
&&
1606 !memcmp(data
, unifying_pairing_answer
,
1607 sizeof(unifying_pairing_answer
)))
1608 device_index
= (data
[4] & 0x0F) + 1;
1614 * Data is from the HID++ collection, in this case, we forward the
1615 * data to the corresponding child dj device and return 0 to hid-core
1616 * so he data also goes to the hidraw device of the receiver. This
1617 * allows a user space application to implement the full HID++ routing
1621 if ((device_index
< DJ_DEVICE_INDEX_MIN
) ||
1622 (device_index
> DJ_DEVICE_INDEX_MAX
)) {
1624 * Device index is wrong, bail out.
1625 * This driver can ignore safely the receiver notifications,
1626 * so ignore those reports too.
1628 hid_err(hdev
, "%s: invalid device index:%d\n", __func__
,
1629 hidpp_report
->device_index
);
1633 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1635 dj_dev
= djrcv_dev
->paired_dj_devices
[device_index
];
1638 * With 27 MHz receivers, we do not get an explicit unpair event,
1639 * remove the old device if the user has paired a *different* device.
1641 if (djrcv_dev
->type
== recvr_type_27mhz
&& dj_dev
&&
1642 hidpp_report
->sub_id
== REPORT_TYPE_NOTIF_DEVICE_CONNECTED
&&
1643 hidpp_report
->params
[HIDPP_PARAM_PROTO_TYPE
] == 0x02 &&
1644 hidpp_report
->params
[HIDPP_PARAM_27MHZ_DEVID
] !=
1645 dj_dev
->hdev
->product
) {
1646 struct dj_workitem workitem
= {
1647 .device_index
= hidpp_report
->device_index
,
1648 .type
= WORKITEM_TYPE_UNPAIRED
,
1650 kfifo_in(&djrcv_dev
->notif_fifo
, &workitem
, sizeof(workitem
));
1651 /* logi_hidpp_recv_queue_notif will queue the work */
1656 logi_dj_recv_forward_report(dj_dev
, data
, size
);
1658 if (hidpp_report
->sub_id
== REPORT_TYPE_NOTIF_DEVICE_CONNECTED
)
1659 logi_hidpp_recv_queue_notif(hdev
, hidpp_report
);
1661 logi_dj_recv_queue_unknown_work(djrcv_dev
);
1664 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1669 static int logi_dj_raw_event(struct hid_device
*hdev
,
1670 struct hid_report
*report
, u8
*data
,
1673 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1674 dbg_hid("%s, size:%d\n", __func__
, size
);
1679 if (!hdev
->report_enum
[HID_INPUT_REPORT
].numbered
) {
1681 if (djrcv_dev
->unnumbered_application
== HID_GD_KEYBOARD
) {
1683 * For the keyboard, we can reuse the same report by
1684 * using the second byte which is constant in the USB
1685 * HID report descriptor.
1688 data
[0] = REPORT_TYPE_KEYBOARD
;
1690 logi_dj_recv_forward_input_report(hdev
, data
, size
);
1692 /* restore previous state */
1697 * Mouse-only receivers send unnumbered mouse data. The 27 MHz
1698 * receiver uses 6 byte packets, the nano receiver 8 bytes.
1700 if (djrcv_dev
->unnumbered_application
== HID_GD_MOUSE
&&
1704 /* Prepend report id */
1705 mouse_report
[0] = REPORT_TYPE_MOUSE
;
1706 memcpy(mouse_report
+ 1, data
, size
);
1707 logi_dj_recv_forward_input_report(hdev
, mouse_report
,
1715 case REPORT_ID_DJ_SHORT
:
1716 if (size
!= DJREPORT_SHORT_LENGTH
) {
1717 hid_err(hdev
, "Short DJ report bad size (%d)", size
);
1720 return logi_dj_dj_event(hdev
, report
, data
, size
);
1721 case REPORT_ID_DJ_LONG
:
1722 if (size
!= DJREPORT_LONG_LENGTH
) {
1723 hid_err(hdev
, "Long DJ report bad size (%d)", size
);
1726 return logi_dj_dj_event(hdev
, report
, data
, size
);
1727 case REPORT_ID_HIDPP_SHORT
:
1728 if (size
!= HIDPP_REPORT_SHORT_LENGTH
) {
1729 hid_err(hdev
, "Short HID++ report bad size (%d)", size
);
1732 return logi_dj_hidpp_event(hdev
, report
, data
, size
);
1733 case REPORT_ID_HIDPP_LONG
:
1734 if (size
!= HIDPP_REPORT_LONG_LENGTH
) {
1735 hid_err(hdev
, "Long HID++ report bad size (%d)", size
);
1738 return logi_dj_hidpp_event(hdev
, report
, data
, size
);
1741 logi_dj_recv_forward_input_report(hdev
, data
, size
);
1746 static int logi_dj_probe(struct hid_device
*hdev
,
1747 const struct hid_device_id
*id
)
1749 struct hid_report_enum
*rep_enum
;
1750 struct hid_report
*rep
;
1751 struct dj_receiver_dev
*djrcv_dev
;
1752 struct usb_interface
*intf
;
1753 unsigned int no_dj_interfaces
= 0;
1754 bool has_hidpp
= false;
1755 unsigned long flags
;
1759 * Call to usbhid to fetch the HID descriptors of the current
1760 * interface subsequently call to the hid/hid-core to parse the
1761 * fetched descriptors.
1763 retval
= hid_parse(hdev
);
1765 hid_err(hdev
, "%s: parse failed\n", __func__
);
1770 * Some KVMs add an extra interface for e.g. mouse emulation. If we
1771 * treat these as logitech-dj interfaces then this causes input events
1772 * reported through this extra interface to not be reported correctly.
1773 * To avoid this, we treat these as generic-hid devices.
1775 switch (id
->driver_data
) {
1776 case recvr_type_dj
: no_dj_interfaces
= 3; break;
1777 case recvr_type_hidpp
: no_dj_interfaces
= 2; break;
1778 case recvr_type_gaming_hidpp
: no_dj_interfaces
= 3; break;
1779 case recvr_type_mouse_only
: no_dj_interfaces
= 2; break;
1780 case recvr_type_27mhz
: no_dj_interfaces
= 2; break;
1781 case recvr_type_bluetooth
: no_dj_interfaces
= 2; break;
1782 case recvr_type_dinovo
: no_dj_interfaces
= 2; break;
1784 if (hid_is_usb(hdev
)) {
1785 intf
= to_usb_interface(hdev
->dev
.parent
);
1786 if (intf
&& intf
->altsetting
->desc
.bInterfaceNumber
>=
1788 hdev
->quirks
|= HID_QUIRK_INPUT_PER_APP
;
1789 return hid_hw_start(hdev
, HID_CONNECT_DEFAULT
);
1793 rep_enum
= &hdev
->report_enum
[HID_INPUT_REPORT
];
1795 /* no input reports, bail out */
1796 if (list_empty(&rep_enum
->report_list
))
1800 * Check for the HID++ application.
1801 * Note: we should theoretically check for HID++ and DJ
1802 * collections, but this will do.
1804 list_for_each_entry(rep
, &rep_enum
->report_list
, list
) {
1805 if (rep
->application
== 0xff000001)
1810 * Ignore interfaces without DJ/HID++ collection, they will not carry
1811 * any data, dont create any hid_device for them.
1813 if (!has_hidpp
&& id
->driver_data
== recvr_type_dj
)
1816 /* get the current application attached to the node */
1817 rep
= list_first_entry(&rep_enum
->report_list
, struct hid_report
, list
);
1818 djrcv_dev
= dj_get_receiver_dev(hdev
, id
->driver_data
,
1819 rep
->application
, has_hidpp
);
1821 hid_err(hdev
, "%s: dj_get_receiver_dev failed\n", __func__
);
1825 if (!rep_enum
->numbered
)
1826 djrcv_dev
->unnumbered_application
= rep
->application
;
1828 /* Starts the usb device and connects to upper interfaces hiddev and
1830 retval
= hid_hw_start(hdev
, HID_CONNECT_HIDRAW
|HID_CONNECT_HIDDEV
);
1832 hid_err(hdev
, "%s: hid_hw_start returned error\n", __func__
);
1833 goto hid_hw_start_fail
;
1837 retval
= logi_dj_recv_switch_to_dj_mode(djrcv_dev
, 0);
1839 hid_err(hdev
, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n",
1841 goto switch_to_dj_mode_fail
;
1845 /* This is enabling the polling urb on the IN endpoint */
1846 retval
= hid_hw_open(hdev
);
1848 hid_err(hdev
, "%s: hid_hw_open returned error:%d\n",
1853 /* Allow incoming packets to arrive: */
1854 hid_device_io_start(hdev
);
1857 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1858 djrcv_dev
->ready
= true;
1859 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1860 retval
= logi_dj_recv_query_paired_devices(djrcv_dev
);
1862 hid_err(hdev
, "%s: logi_dj_recv_query_paired_devices error:%d\n",
1865 * This can happen with a KVM, let the probe succeed,
1866 * logi_dj_recv_queue_unknown_work will retry later.
1874 switch_to_dj_mode_fail
:
1878 dj_put_receiver_dev(hdev
);
1883 static int logi_dj_reset_resume(struct hid_device
*hdev
)
1886 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1888 if (!djrcv_dev
|| djrcv_dev
->hidpp
!= hdev
)
1891 retval
= logi_dj_recv_switch_to_dj_mode(djrcv_dev
, 0);
1893 hid_err(hdev
, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n",
1901 static void logi_dj_remove(struct hid_device
*hdev
)
1903 struct dj_receiver_dev
*djrcv_dev
= hid_get_drvdata(hdev
);
1904 struct dj_device
*dj_dev
;
1905 unsigned long flags
;
1908 dbg_hid("%s\n", __func__
);
1911 return hid_hw_stop(hdev
);
1914 * This ensures that if the work gets requeued from another
1915 * interface of the same receiver it will be a no-op.
1917 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1918 djrcv_dev
->ready
= false;
1919 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1921 cancel_work_sync(&djrcv_dev
->work
);
1927 * For proper operation we need access to all interfaces, so we destroy
1928 * the paired devices when we're unbound from any interface.
1930 * Note we may still be bound to other interfaces, sharing the same
1931 * djrcv_dev, so we need locking here.
1933 for (i
= 0; i
< (DJ_MAX_PAIRED_DEVICES
+ DJ_DEVICE_INDEX_MIN
); i
++) {
1934 spin_lock_irqsave(&djrcv_dev
->lock
, flags
);
1935 dj_dev
= djrcv_dev
->paired_dj_devices
[i
];
1936 djrcv_dev
->paired_dj_devices
[i
] = NULL
;
1937 spin_unlock_irqrestore(&djrcv_dev
->lock
, flags
);
1938 if (dj_dev
!= NULL
) {
1939 hid_destroy_device(dj_dev
->hdev
);
1944 dj_put_receiver_dev(hdev
);
1947 static const struct hid_device_id logi_dj_receivers
[] = {
1948 { /* Logitech unifying receiver (0xc52b) */
1949 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1950 USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER
),
1951 .driver_data
= recvr_type_dj
},
1952 { /* Logitech unifying receiver (0xc532) */
1953 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1954 USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2
),
1955 .driver_data
= recvr_type_dj
},
1957 { /* Logitech Nano mouse only receiver (0xc52f) */
1958 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1959 USB_DEVICE_ID_LOGITECH_NANO_RECEIVER
),
1960 .driver_data
= recvr_type_mouse_only
},
1961 { /* Logitech Nano (non DJ) receiver (0xc534) */
1962 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1963 USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2
),
1964 .driver_data
= recvr_type_hidpp
},
1966 { /* Logitech G700(s) receiver (0xc531) */
1967 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1968 USB_DEVICE_ID_LOGITECH_G700_RECEIVER
),
1969 .driver_data
= recvr_type_gaming_hidpp
},
1970 { /* Logitech G602 receiver (0xc537) */
1971 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1973 .driver_data
= recvr_type_gaming_hidpp
},
1974 { /* Logitech lightspeed receiver (0xc539) */
1975 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1976 USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1
),
1977 .driver_data
= recvr_type_gaming_hidpp
},
1978 { /* Logitech powerplay receiver (0xc53a) */
1979 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1980 USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY
),
1981 .driver_data
= recvr_type_gaming_hidpp
},
1982 { /* Logitech lightspeed receiver (0xc53f) */
1983 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1984 USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1
),
1985 .driver_data
= recvr_type_gaming_hidpp
},
1987 { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
1988 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
, USB_DEVICE_ID_MX3000_RECEIVER
),
1989 .driver_data
= recvr_type_27mhz
},
1990 { /* Logitech 27 MHz HID++ 1.0 receiver (0xc517) */
1991 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1992 USB_DEVICE_ID_S510_RECEIVER_2
),
1993 .driver_data
= recvr_type_27mhz
},
1994 { /* Logitech 27 MHz HID++ 1.0 mouse-only receiver (0xc51b) */
1995 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
1996 USB_DEVICE_ID_LOGITECH_27MHZ_MOUSE_RECEIVER
),
1997 .driver_data
= recvr_type_27mhz
},
1999 { /* Logitech MX5000 HID++ / bluetooth receiver keyboard intf. (0xc70e) */
2000 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2001 USB_DEVICE_ID_MX5000_RECEIVER_KBD_DEV
),
2002 .driver_data
= recvr_type_bluetooth
},
2003 { /* Logitech MX5000 HID++ / bluetooth receiver mouse intf. (0xc70a) */
2004 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2005 USB_DEVICE_ID_MX5000_RECEIVER_MOUSE_DEV
),
2006 .driver_data
= recvr_type_bluetooth
},
2007 { /* Logitech MX5500 HID++ / bluetooth receiver keyboard intf. (0xc71b) */
2008 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2009 USB_DEVICE_ID_MX5500_RECEIVER_KBD_DEV
),
2010 .driver_data
= recvr_type_bluetooth
},
2011 { /* Logitech MX5500 HID++ / bluetooth receiver mouse intf. (0xc71c) */
2012 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2013 USB_DEVICE_ID_MX5500_RECEIVER_MOUSE_DEV
),
2014 .driver_data
= recvr_type_bluetooth
},
2016 { /* Logitech Dinovo Edge HID++ / bluetooth receiver keyboard intf. (0xc713) */
2017 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2018 USB_DEVICE_ID_DINOVO_EDGE_RECEIVER_KBD_DEV
),
2019 .driver_data
= recvr_type_dinovo
},
2020 { /* Logitech Dinovo Edge HID++ / bluetooth receiver mouse intf. (0xc714) */
2021 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2022 USB_DEVICE_ID_DINOVO_EDGE_RECEIVER_MOUSE_DEV
),
2023 .driver_data
= recvr_type_dinovo
},
2024 { /* Logitech DiNovo Mini HID++ / bluetooth receiver mouse intf. (0xc71e) */
2025 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2026 USB_DEVICE_ID_DINOVO_MINI_RECEIVER_KBD_DEV
),
2027 .driver_data
= recvr_type_dinovo
},
2028 { /* Logitech DiNovo Mini HID++ / bluetooth receiver keyboard intf. (0xc71f) */
2029 HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH
,
2030 USB_DEVICE_ID_DINOVO_MINI_RECEIVER_MOUSE_DEV
),
2031 .driver_data
= recvr_type_dinovo
},
2035 MODULE_DEVICE_TABLE(hid
, logi_dj_receivers
);
2037 static struct hid_driver logi_djreceiver_driver
= {
2038 .name
= "logitech-djreceiver",
2039 .id_table
= logi_dj_receivers
,
2040 .probe
= logi_dj_probe
,
2041 .remove
= logi_dj_remove
,
2042 .raw_event
= logi_dj_raw_event
,
2044 .reset_resume
= logi_dj_reset_resume
,
2048 module_hid_driver(logi_djreceiver_driver
);
2050 MODULE_DESCRIPTION("HID driver for Logitech receivers");
2051 MODULE_LICENSE("GPL");
2052 MODULE_AUTHOR("Logitech");
2053 MODULE_AUTHOR("Nestor Lopez Casado");
2054 MODULE_AUTHOR("nlopezcasad@logitech.com");