Revert "unicode: Don't special case ignorable code points"
[linux.git] / drivers / mfd / mcp-sa11x0.c
blob228c4a2f4c1fa268a0369c005705cf82366b37e3
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/mfd/mcp-sa11x0.c
5 * Copyright (C) 2001-2005 Russell King
7 * SA11x0 MCP (Multimedia Communications Port) driver.
9 * MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
11 #include <linux/module.h>
12 #include <linux/io.h>
13 #include <linux/errno.h>
14 #include <linux/kernel.h>
15 #include <linux/delay.h>
16 #include <linux/spinlock.h>
17 #include <linux/platform_device.h>
18 #include <linux/pm.h>
19 #include <linux/mfd/mcp.h>
21 #include <mach/hardware.h>
22 #include <asm/mach-types.h>
23 #include <linux/platform_data/mfd-mcp-sa11x0.h>
25 #define DRIVER_NAME "sa11x0-mcp"
27 struct mcp_sa11x0 {
28 void __iomem *base0;
29 void __iomem *base1;
30 u32 mccr0;
31 u32 mccr1;
34 /* Register offsets */
35 #define MCCR0(m) ((m)->base0 + 0x00)
36 #define MCDR0(m) ((m)->base0 + 0x08)
37 #define MCDR1(m) ((m)->base0 + 0x0c)
38 #define MCDR2(m) ((m)->base0 + 0x10)
39 #define MCSR(m) ((m)->base0 + 0x18)
40 #define MCCR1(m) ((m)->base1 + 0x00)
42 #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
44 static void
45 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
47 struct mcp_sa11x0 *m = priv(mcp);
49 divisor /= 32;
51 m->mccr0 &= ~0x00007f00;
52 m->mccr0 |= divisor << 8;
53 writel_relaxed(m->mccr0, MCCR0(m));
56 static void
57 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
59 struct mcp_sa11x0 *m = priv(mcp);
61 divisor /= 32;
63 m->mccr0 &= ~0x0000007f;
64 m->mccr0 |= divisor;
65 writel_relaxed(m->mccr0, MCCR0(m));
69 * Write data to the device. The bit should be set after 3 subframe
70 * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
71 * We really should try doing something more productive while we
72 * wait.
74 static void
75 mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
77 struct mcp_sa11x0 *m = priv(mcp);
78 int ret = -ETIME;
79 int i;
81 writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
83 for (i = 0; i < 2; i++) {
84 udelay(mcp->rw_timeout);
85 if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
86 ret = 0;
87 break;
91 if (ret < 0)
92 printk(KERN_WARNING "mcp: write timed out\n");
96 * Read data from the device. The bit should be set after 3 subframe
97 * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
98 * We really should try doing something more productive while we
99 * wait.
101 static unsigned int
102 mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
104 struct mcp_sa11x0 *m = priv(mcp);
105 int ret = -ETIME;
106 int i;
108 writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
110 for (i = 0; i < 2; i++) {
111 udelay(mcp->rw_timeout);
112 if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
113 ret = readl_relaxed(MCDR2(m)) & 0xffff;
114 break;
118 if (ret < 0)
119 printk(KERN_WARNING "mcp: read timed out\n");
121 return ret;
124 static void mcp_sa11x0_enable(struct mcp *mcp)
126 struct mcp_sa11x0 *m = priv(mcp);
128 writel(-1, MCSR(m));
129 m->mccr0 |= MCCR0_MCE;
130 writel_relaxed(m->mccr0, MCCR0(m));
133 static void mcp_sa11x0_disable(struct mcp *mcp)
135 struct mcp_sa11x0 *m = priv(mcp);
137 m->mccr0 &= ~MCCR0_MCE;
138 writel_relaxed(m->mccr0, MCCR0(m));
142 * Our methods.
144 static struct mcp_ops mcp_sa11x0 = {
145 .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
146 .set_audio_divisor = mcp_sa11x0_set_audio_divisor,
147 .reg_write = mcp_sa11x0_write,
148 .reg_read = mcp_sa11x0_read,
149 .enable = mcp_sa11x0_enable,
150 .disable = mcp_sa11x0_disable,
153 static int mcp_sa11x0_probe(struct platform_device *dev)
155 struct mcp_plat_data *data = dev_get_platdata(&dev->dev);
156 struct resource *mem0, *mem1;
157 struct mcp_sa11x0 *m;
158 struct mcp *mcp;
159 int ret;
161 if (!data)
162 return -ENODEV;
164 mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
165 mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
166 if (!mem0 || !mem1)
167 return -ENXIO;
169 if (!request_mem_region(mem0->start, resource_size(mem0),
170 DRIVER_NAME)) {
171 ret = -EBUSY;
172 goto err_mem0;
175 if (!request_mem_region(mem1->start, resource_size(mem1),
176 DRIVER_NAME)) {
177 ret = -EBUSY;
178 goto err_mem1;
181 mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
182 if (!mcp) {
183 ret = -ENOMEM;
184 goto err_alloc;
187 mcp->owner = THIS_MODULE;
188 mcp->ops = &mcp_sa11x0;
189 mcp->sclk_rate = data->sclk_rate;
191 m = priv(mcp);
192 m->mccr0 = data->mccr0 | 0x7f7f;
193 m->mccr1 = data->mccr1;
195 m->base0 = ioremap(mem0->start, resource_size(mem0));
196 m->base1 = ioremap(mem1->start, resource_size(mem1));
197 if (!m->base0 || !m->base1) {
198 ret = -ENOMEM;
199 goto err_ioremap;
202 platform_set_drvdata(dev, mcp);
205 * Initialise device. Note that we initially
206 * set the sampling rate to minimum.
208 writel_relaxed(-1, MCSR(m));
209 writel_relaxed(m->mccr1, MCCR1(m));
210 writel_relaxed(m->mccr0, MCCR0(m));
213 * Calculate the read/write timeout (us) from the bit clock
214 * rate. This is the period for 3 64-bit frames. Always
215 * round this time up.
217 mcp->rw_timeout = DIV_ROUND_UP(64 * 3 * 1000000, mcp->sclk_rate);
219 ret = mcp_host_add(mcp, data->codec_pdata);
220 if (ret == 0)
221 return 0;
223 err_ioremap:
224 iounmap(m->base1);
225 iounmap(m->base0);
226 mcp_host_free(mcp);
227 err_alloc:
228 release_mem_region(mem1->start, resource_size(mem1));
229 err_mem1:
230 release_mem_region(mem0->start, resource_size(mem0));
231 err_mem0:
232 return ret;
235 static void mcp_sa11x0_remove(struct platform_device *dev)
237 struct mcp *mcp = platform_get_drvdata(dev);
238 struct mcp_sa11x0 *m = priv(mcp);
239 struct resource *mem0, *mem1;
241 if (m->mccr0 & MCCR0_MCE)
242 dev_warn(&dev->dev,
243 "device left active (missing disable call?)\n");
245 mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
246 mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
248 mcp_host_del(mcp);
249 iounmap(m->base1);
250 iounmap(m->base0);
251 mcp_host_free(mcp);
252 release_mem_region(mem1->start, resource_size(mem1));
253 release_mem_region(mem0->start, resource_size(mem0));
256 static int mcp_sa11x0_suspend(struct device *dev)
258 struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
260 if (m->mccr0 & MCCR0_MCE)
261 dev_warn(dev, "device left active (missing disable call?)\n");
263 writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
265 return 0;
268 static int mcp_sa11x0_resume(struct device *dev)
270 struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
272 writel_relaxed(m->mccr1, MCCR1(m));
273 writel_relaxed(m->mccr0, MCCR0(m));
275 return 0;
278 static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
279 .suspend = mcp_sa11x0_suspend,
280 .freeze = mcp_sa11x0_suspend,
281 .poweroff = mcp_sa11x0_suspend,
282 .resume_noirq = mcp_sa11x0_resume,
283 .thaw_noirq = mcp_sa11x0_resume,
284 .restore_noirq = mcp_sa11x0_resume,
287 static struct platform_driver mcp_sa11x0_driver = {
288 .probe = mcp_sa11x0_probe,
289 .remove = mcp_sa11x0_remove,
290 .driver = {
291 .name = DRIVER_NAME,
292 .pm = pm_sleep_ptr(&mcp_sa11x0_pm_ops),
297 * This needs re-working
299 module_platform_driver(mcp_sa11x0_driver);
301 MODULE_ALIAS("platform:" DRIVER_NAME);
302 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
303 MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
304 MODULE_LICENSE("GPL");