?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 6.13
[linux.git] / drivers / net / mdio / mdio-mux-meson-g12a.c
blob08d6a6c93fb8bf027ef8b7ddc321739e98012c91
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2019 Baylibre, SAS.
3 * Author: Jerome Brunet <jbrunet@baylibre.com>
4 */
5
6 #include <linux/bitfield.h>
7 #include <linux/delay.h>
8 #include <linux/clk.h>
9 #include <linux/clk-provider.h>
10 #include <linux/device.h>
11 #include <linux/io.h>
12 #include <linux/iopoll.h>
13 #include <linux/mdio-mux.h>
14 #include <linux/module.h>
15 #include <linux/phy.h>
16 #include <linux/platform_device.h>
17
18 #define ETH_PLL_STS 0x40
19 #define ETH_PLL_CTL0 0x44
20 #define PLL_CTL0_LOCK_DIG BIT(30)
21 #define PLL_CTL0_RST BIT(29)
22 #define PLL_CTL0_EN BIT(28)
23 #define PLL_CTL0_SEL BIT(23)
24 #define PLL_CTL0_N GENMASK(14, 10)
25 #define PLL_CTL0_M GENMASK(8, 0)
26 #define PLL_LOCK_TIMEOUT 1000000
27 #define PLL_MUX_NUM_PARENT 2
28 #define ETH_PLL_CTL1 0x48
29 #define ETH_PLL_CTL2 0x4c
30 #define ETH_PLL_CTL3 0x50
31 #define ETH_PLL_CTL4 0x54
32 #define ETH_PLL_CTL5 0x58
33 #define ETH_PLL_CTL6 0x5c
34 #define ETH_PLL_CTL7 0x60
35
36 #define ETH_PHY_CNTL0 0x80
37 #define EPHY_G12A_ID 0x33010180
38 #define ETH_PHY_CNTL1 0x84
39 #define PHY_CNTL1_ST_MODE GENMASK(2, 0)
40 #define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
41 #define EPHY_DFLT_ADD 8
42 #define PHY_CNTL1_MII_MODE GENMASK(15, 14)
43 #define EPHY_MODE_RMII 0x1
44 #define PHY_CNTL1_CLK_EN BIT(16)
45 #define PHY_CNTL1_CLKFREQ BIT(17)
46 #define PHY_CNTL1_PHY_ENB BIT(18)
47 #define ETH_PHY_CNTL2 0x88
48 #define PHY_CNTL2_USE_INTERNAL BIT(5)
49 #define PHY_CNTL2_SMI_SRC_MAC BIT(6)
50 #define PHY_CNTL2_RX_CLK_EPHY BIT(9)
51
52 #define MESON_G12A_MDIO_EXTERNAL_ID 0
53 #define MESON_G12A_MDIO_INTERNAL_ID 1
54
55 struct g12a_mdio_mux {
56 void __iomem *regs;
57 void *mux_handle;
58 struct clk *pll;
59 };
60
61 struct g12a_ephy_pll {
62 void __iomem *base;
63 struct clk_hw hw;
64 };
65
66 #define g12a_ephy_pll_to_dev(_hw) \
67 container_of(_hw, struct g12a_ephy_pll, hw)
68
69 static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
70 unsigned long parent_rate)
71 {
72 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
73 u32 val, m, n;
74
75 val = readl(pll->base + ETH_PLL_CTL0);
76 m = FIELD_GET(PLL_CTL0_M, val);
77 n = FIELD_GET(PLL_CTL0_N, val);
78
79 return parent_rate * m / n;
80 }
81
82 static int g12a_ephy_pll_enable(struct clk_hw *hw)
83 {
84 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
85 u32 val = readl(pll->base + ETH_PLL_CTL0);
86
87 /* Apply both enable an reset */
88 val |= PLL_CTL0_RST | PLL_CTL0_EN;
89 writel(val, pll->base + ETH_PLL_CTL0);
90
91 /* Clear the reset to let PLL lock */
92 val &= ~PLL_CTL0_RST;
93 writel(val, pll->base + ETH_PLL_CTL0);
94
95 /* Poll on the digital lock instead of the usual analog lock
96 * This is done because bit 31 is unreliable on some SoC. Bit
97 * 31 may indicate that the PLL is not lock even though the clock
98 * is actually running
99 */
100 return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
101 val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
102 }
103
104 static void g12a_ephy_pll_disable(struct clk_hw *hw)
105 {
106 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
107 u32 val;
108
109 val = readl(pll->base + ETH_PLL_CTL0);
110 val &= ~PLL_CTL0_EN;
111 val |= PLL_CTL0_RST;
112 writel(val, pll->base + ETH_PLL_CTL0);
113 }
114
115 static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
116 {
117 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
118 unsigned int val;
119
120 val = readl(pll->base + ETH_PLL_CTL0);
121
122 return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
123 }
124
125 static int g12a_ephy_pll_init(struct clk_hw *hw)
126 {
127 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
128
129 /* Apply PLL HW settings */
130 writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
131 writel(0x927e0000, pll->base + ETH_PLL_CTL1);
132 writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
133 writel(0x00000000, pll->base + ETH_PLL_CTL3);
134 writel(0x00000000, pll->base + ETH_PLL_CTL4);
135 writel(0x20200000, pll->base + ETH_PLL_CTL5);
136 writel(0x0000c002, pll->base + ETH_PLL_CTL6);
137 writel(0x00000023, pll->base + ETH_PLL_CTL7);
138
139 return 0;
140 }
141
142 static const struct clk_ops g12a_ephy_pll_ops = {
143 .recalc_rate = g12a_ephy_pll_recalc_rate,
144 .is_enabled = g12a_ephy_pll_is_enabled,
145 .enable = g12a_ephy_pll_enable,
146 .disable = g12a_ephy_pll_disable,
147 .init = g12a_ephy_pll_init,
148 };
149
150 static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
151 {
152 u32 value;
153 int ret;
154
155 /* Enable the phy clock */
156 if (!__clk_is_enabled(priv->pll)) {
157 ret = clk_prepare_enable(priv->pll);
158 if (ret)
159 return ret;
160 }
161
162 /* Initialize ephy control */
163 writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
164
165 /* Make sure we get a 0 -> 1 transition on the enable bit */
166 value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
167 FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
168 FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
169 PHY_CNTL1_CLK_EN |
170 PHY_CNTL1_CLKFREQ;
171 writel(value, priv->regs + ETH_PHY_CNTL1);
172 writel(PHY_CNTL2_USE_INTERNAL |
173 PHY_CNTL2_SMI_SRC_MAC |
174 PHY_CNTL2_RX_CLK_EPHY,
175 priv->regs + ETH_PHY_CNTL2);
176
177 value |= PHY_CNTL1_PHY_ENB;
178 writel(value, priv->regs + ETH_PHY_CNTL1);
179
180 /* The phy needs a bit of time to power up */
181 mdelay(10);
182
183 return 0;
184 }
185
186 static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
187 {
188 /* Reset the mdio bus mux */
189 writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
190
191 /* Disable the phy clock if enabled */
192 if (__clk_is_enabled(priv->pll))
193 clk_disable_unprepare(priv->pll);
194
195 return 0;
196 }
197
198 static int g12a_mdio_switch_fn(int current_child, int desired_child,
199 void *data)
200 {
201 struct g12a_mdio_mux *priv = dev_get_drvdata(data);
202
203 if (current_child == desired_child)
204 return 0;
205
206 switch (desired_child) {
207 case MESON_G12A_MDIO_EXTERNAL_ID:
208 return g12a_enable_external_mdio(priv);
209 case MESON_G12A_MDIO_INTERNAL_ID:
210 return g12a_enable_internal_mdio(priv);
211 default:
212 return -EINVAL;
213 }
214 }
215
216 static const struct of_device_id g12a_mdio_mux_match[] = {
217 { .compatible = "amlogic,g12a-mdio-mux", },
218 {},
219 };
220 MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
221
222 static int g12a_ephy_glue_clk_register(struct device *dev)
223 {
224 struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
225 const char *parent_names[PLL_MUX_NUM_PARENT];
226 struct clk_init_data init;
227 struct g12a_ephy_pll *pll;
228 struct clk_mux *mux;
229 struct clk *clk;
230 char *name;
231 int i;
232
233 /* get the mux parents */
234 for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
235 char in_name[8];
236
237 snprintf(in_name, sizeof(in_name), "clkin%d", i);
238 clk = devm_clk_get(dev, in_name);
239 if (IS_ERR(clk))
240 return dev_err_probe(dev, PTR_ERR(clk),
241 "Missing clock %s\n", in_name);
242
243 parent_names[i] = __clk_get_name(clk);
244 }
245
246 /* create the input mux */
247 mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
248 if (!mux)
249 return -ENOMEM;
250
251 name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
252 if (!name)
253 return -ENOMEM;
254
255 init.name = name;
256 init.ops = &clk_mux_ro_ops;
257 init.flags = 0;
258 init.parent_names = parent_names;
259 init.num_parents = PLL_MUX_NUM_PARENT;
260
261 mux->reg = priv->regs + ETH_PLL_CTL0;
262 mux->shift = __ffs(PLL_CTL0_SEL);
263 mux->mask = PLL_CTL0_SEL >> mux->shift;
264 mux->hw.init = &init;
265
266 clk = devm_clk_register(dev, &mux->hw);
267 kfree(name);
268 if (IS_ERR(clk)) {
269 dev_err(dev, "failed to register input mux\n");
270 return PTR_ERR(clk);
271 }
272
273 /* create the pll */
274 pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
275 if (!pll)
276 return -ENOMEM;
277
278 name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
279 if (!name)
280 return -ENOMEM;
281
282 init.name = name;
283 init.ops = &g12a_ephy_pll_ops;
284 init.flags = 0;
285 parent_names[0] = __clk_get_name(clk);
286 init.parent_names = parent_names;
287 init.num_parents = 1;
288
289 pll->base = priv->regs;
290 pll->hw.init = &init;
291
292 clk = devm_clk_register(dev, &pll->hw);
293 kfree(name);
294 if (IS_ERR(clk)) {
295 dev_err(dev, "failed to register input mux\n");
296 return PTR_ERR(clk);
297 }
298
299 priv->pll = clk;
300
301 return 0;
302 }
303
304 static int g12a_mdio_mux_probe(struct platform_device *pdev)
305 {
306 struct device *dev = &pdev->dev;
307 struct g12a_mdio_mux *priv;
308 struct clk *pclk;
309 int ret;
310
311 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
312 if (!priv)
313 return -ENOMEM;
314
315 platform_set_drvdata(pdev, priv);
316
317 priv->regs = devm_platform_ioremap_resource(pdev, 0);
318 if (IS_ERR(priv->regs))
319 return PTR_ERR(priv->regs);
320
321 pclk = devm_clk_get_enabled(dev, "pclk");
322 if (IS_ERR(pclk))
323 return dev_err_probe(dev, PTR_ERR(pclk),
324 "failed to get peripheral clock\n");
325
326 /* Register PLL in CCF */
327 ret = g12a_ephy_glue_clk_register(dev);
328 if (ret)
329 return ret;
330
331 ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
332 &priv->mux_handle, dev, NULL);
333 if (ret)
334 dev_err_probe(dev, ret, "mdio multiplexer init failed\n");
335
336 return ret;
337 }
338
339 static void g12a_mdio_mux_remove(struct platform_device *pdev)
340 {
341 struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
342
343 mdio_mux_uninit(priv->mux_handle);
344
345 if (__clk_is_enabled(priv->pll))
346 clk_disable_unprepare(priv->pll);
347 }
348
349 static struct platform_driver g12a_mdio_mux_driver = {
350 .probe = g12a_mdio_mux_probe,
351 .remove = g12a_mdio_mux_remove,
352 .driver = {
353 .name = "g12a-mdio_mux",
354 .of_match_table = g12a_mdio_mux_match,
355 },
356 };
357 module_platform_driver(g12a_mdio_mux_driver);
358
359 MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
360 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
361 MODULE_LICENSE("GPL v2");
Linux Kernel